Construction Engineering Commons^™

Tender Procedure For Traditionally Procured Building Contracts In Ireland, Tony Cunningham

Other Resources

The process of tendering for construction contracts is an expensive process, particularly where contracts are large and/or complex or involve partial, or total, contractor design. The underlying philosophy guiding best practice in tendering procedure is that of ensuring fair play among the tendering contractors. Tenders for building contracts may be obtained using a range of approaches. This study examines best practice in tendering procedure for building contracts in the private and public sectors in Ireland and focuses in particular on the procedures to be carried out under open and selective/restricted tendering approaches.

The study identifies where open tendering and selective …

The Impact Of Project Delivery Methods On Dispute Occurrence In Public Highway Projects, Samaneh Nasrollahi, Ghada M. Gad, Alan Atalah

Master of Technology Management Plan II Graduate Projects

The construction industry is a complex and competitive industry in which different participants with different expertise, talents, and levels of knowledge work together to achieve their objectives and complete a project. Sine different participants with different interest involve in a construction project, therefore, conflicts arise and become inevitable. Conflicts in projects will cause an adversarial environment which result to disputes. Hence, if conflicts are not well managed and resolved in a timely manner, they quickly turn into disputes, which prevent the successful completion of the construction project, in terms of cost and time, and increasing the potential for poor project …

An Introduction To Building Contracts: An Irish Context, Tony Cunningham

Other Resources

A contract is an agreement which is capable of being enforced at law and whose essential characteristic is that of a bargain. Contract law focuses predominantly on commercial transactions and in the construction context these range from simple every-day transactions such as purchasing a box of nails to procuring multi-million euro building facilities. In Ireland construction clients typically engage designers and quantity surveyors to formulate designs and they subsequently contract with building contractors to construct the designs. The contractors, in turn, typically outsource much of the work to subcontractors and order materials from numerous suppliers. All of these activities involve …

Ua66 Ogden College Of Science & Engineering Newsletter, Wku Ogden College Of Science & Engineering

Ogden College of Science & Engineering Publications

Newsletter created by and about WKU Ogden College of Science & Engineering.

• Ogden College Hall Taking Shape on TIme & on Budget
• Alumni Focus: Dr. Talia McKinney Collins
• WKU Research Foundation Launches New Website
• French, Jackson. Stemshot Rocketry Competition
• Agriculture
• Architectural & Manufacturing Sciences
• Grants & Publications
• Dr. Noah Ashley Receives NIH Grant
• Biology - News & Notes
• WKU Chemistry Welcomes Dr. Lawrence Hill & Dr. David Wolfgang
• Gary Kwong Receives McNally Award
• Student Teams Compete in National Engineering Contests Over the Summer
• Geology Major Conducts Research in Ethiopia - Deborah Flynn
• Geography & Geology
• WKU Meterology Launches White Squirrel …

Kihefo Vocational Center: Kabale, Uganda, Jason Matthew Angerer

Construction Management

Journeyman International (JI) is a non-profit organization which acts as a platform for bringing together volunteer Architects, Designers, Engineers, and Construction Managers with humanitarian projects around the world. Kigezi Healthcare Foundation (KIHEFO) a non-profit NGO located in Kabale, Uganda is a client seeking to build a vocational center to educate the workforce of Uganda. The center will include multi-purpose class rooms, a dining hall, rabbit farm, carpentry shop, and living complex. The Architect on the project was Courtney Wedel from Cal Poly. As the Construction Manager on the project my responsibilities include; Design Assist, Feasibility Analysis, Scheduling, Estimating, and Managing …

Bs News November/December

Building Services Engineering

No abstract provided.

International Construction Measurement Standard, Charles Mitchell

Other Resources

The International Construction Measurement Standard Coalition (the Coalition) was formed on 17 June 2015 after meeting at the International Monetary Fund in Washington DC, USA. The Coalition, comprising the organisations listed below at the date of publication, aims to bring about consistency in construction cost reporting standards internationally. This is achieved by the creation and adoption of this ICMS, an agreed international standard for the structuring and presentation of cost reports. ICMS sets out a structure for describing construction costs in terms of project scope, attributes and values descriptors. This document setting out the provisions of ICMS is the first …

How Acoustics In California High Performance Schools Relate To Student Achievement, Devin K. Wong

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

This research project seeks to determine if students attending K–12 schools meeting a minimum standard of high performance classroom conditions in the state of California do evidence higher scholastic achievement, based on publically available results on state-wide standardized tests. In three phases, a subset of 200+ schools applying for grants dedicated to building high performance schools over the past decade was correlated with an existing database of achievement scores for all public schools in California. The criteria utilized to specify high performance classrooms was provided by the California High Performance Initiative (HPI) Grant program. Academic achievement was evaluated on a …

Mother's Room - Design | Build, Zoey Koester, Shelby Orr, Damian Smith, Andrew Estabrook, Sarah Barth, Caroline Simmons

ASA Multidisciplinary Research Symposium

The lack of a comfortable environment for mothers on campus was challenged by the Non-Traditional Student Services department of a public university this past year. The department recruited a team of architecture, interior-design, and construction management faculty and students to design and build a mother’s room for the campus library.

Buildings As An Assembly Of 3d Printed Components, Stephen S. Lauer

ASA Multidisciplinary Research Symposium

This project aimed to design a series of components that would be assembled to become a house. The design is a house that is printed in a series of modules and assembled using a series of printed connectors for not only attaching the modules but also used in other various details.

Influence Of Ground Granulated Blastfurnace Slag On The Thermal Properties Of Pcm-Concrete Composite Panels, Dervilla Niall, Oliver Kinnane, Roger P. West, Sarah Mccormack

Conference papers

The thermal mass of concrete within a building can be used as an energy storage system and hence reduce the demand on the auxiliary heating and cooling systems in the building. The heat storage capacity of concrete can be enhanced by adding phase change materials (PCMs) which provide a high latent heat storage capacity. However the addition of PCM to concrete reduces the conductivity of the concrete due to the low conductivity of the PCMs. This hinders the efficient utilisation of the additional heat storage capacity provided by the PCM.

It is generally understood that the use of ground granulated …

Case Study Of Quantifying Energy Loss Through Ceiling-Attic Recessed Lighting Fixtures Through 3d Numerical Simulation, Ri Na, Shengmao Lin, Zhigang Shen, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Abstract Air leakage through recessed lighting fixtures has been identified as a common issue that causes extra energy consumption in residential buildings. However, few quantitative studies in this area were found. As such, a preliminary assessment of the magnitude of this type of energy loss was conducted by using three-dimensional (3D) transient computational fluid dynamics (CFD) models. A hypothetical layout of recessed lighting fixtures was designed with boundary conditions of four different seasons, which were obtained from recorded roof/attic temperature data sets. The results of the study indicate that leakage of recessed lighting fixtures could be a significant channel of …

In Situ Thermal Transmittance Of Case Studies In Dublin., Cormac Flood, Lloyd Scott, William Gleeson

Conference papers

Thermal transmittance (U-values) of exterior walls represent a source of uncertainty when estimating the energy performance of dwellings. It has been noted in research that the standard calculation methodology for thermal transmittance should be improved. Subsequently, hygrothermal analysis has been used as an accurate building design tool due to its incorporation of climate specific effects on construction assemblies such as moisture retention and release. In-situ measurement of thermal transmittance could also be an effective tool for evaluating the material performance of assemblies of a building. This paper provides the context, research process and analysis of 3 case studies situated in …

International Construction Measurement Standards (Icms) Explained, Charles Mitchell

Articles

In 2015 the United Nations wrote to various construction cost bodies around the world seeking some form of uniformity in the reporting of construction costs worldwide. The UN concern was the variance of reported statistics globally for similar projects even when local economic factors were taken into account.

As a result a meeting was held for interested parties in the offices of the International Monetary Fund (IMF) in Washington D.C. in May 2015. This meeting became the inaugural meeting of what, today, is known as the International Construction Measurement Standards (ICMS) Coalition. The membership of the coalition is open to …

Value Engineering Of Construction Quantities: "The Golden Report", Chad J. Cornwell

Construction Management

The common materials that are seen everyday on a construction project are concrete, slab dowel baskets and base. Each of these materials can be most seen on highway and road construction. This is often taken for granted since it is in our everyday life. Each of these materials were gathered from a heavy civil project in the greater San Diego area. When collecting my information in the field we gathered existing quantities of concrete, slab dowel baskets, and aggregate. After all of this information is compiled and sent to the project manager hopefully this will result in a decrease in …

Fall 2016 - Volume 41, Number 1, Full Issue

The Professional Constructor

No abstract provided.

Bs News September/October

Building Services Engineering

No abstract provided.

Capacity Building For Sustainable Workforce In The Construction Industry, Edelmiro F. Escamilla, Mohammadreza Ostadalimakhmalbaf

The Professional Constructor

Research has shown that the construction industry will face workforce shortages that will increase delivery cost and completion time. The purpose of this paper is to first identify and synthesize the fundamental factors impacting recruitment and retention of the potential construction workforce. A qualitative approach was employed in order to collect and synthesize known factors related to workforce development and capacity building for the construction industry. The paper then presents a conceptual framework for conducting research on capacity generation of a sustainable construction workforce—by considering the impact of family unit and cultural values, career path perceptions, higher educational attainment, and …

Comparing Owner Perceptions Vs. Performance Reality On Construction Management At Risk Public School Projects, Noel Carpenter, Dennis C. Bausman

The Professional Constructor

Over the past decade construction expenditures for education have reached approximately $350 billion with $195 billion of that total spent on K-12 public schools. Public funding through state and local taxes is the primary source of support for construction and school districts are charged with spending these dollars wisely. Within the confines of procurement statutes school districts must select a delivery method that best suits their needs. Two commonly used delivery methods are Design-Bid-Build and Construction Manager at Risk (CM at Risk). This paper examines qualitative and quantitative data collected from one hundred thirty-seven new K-12 school projects constructed in …

Free Fall Of Self-Consolidating Concrete In Walls Three Meters High, Donald J. Phillippi, Katie Loughmiller, Ray Buyle, Michael Cesena

The Professional Constructor

Self-consolidating concrete, (SCC) is a highly flowable, non-segregating concrete that allows for concrete placement without vibration or external consolidation. SCC also allows rapid concrete placement with reduced labor costs, resulting in vastly improved concrete surface finishes and architectural applications (RMCAO 2009). To accomplish SCC, the concrete industry has developed improvements in high-range water reducer admixtures for flowability and viscosity-modifying admixtures for stability. The current project investigated six specimens, which provided an evaluation of SCC allowed to free fall 3 m (10 ft) that filled wall formwork with different inclinations and amounts of steel reinforcement. The purpose of the investigation was …

Measuring Building Substructures: Solutions To ‘First Year’ Introductory Level Examination Questions, Tony Cunningham

Other Resources

The measurement of substructure works to simple domestic type buildings is a logical starting point for students to commence the process of taking-off building quantities. Substructure work is typically the first class of work to be explained in textbooks dealing with both construction technology and building measurement. However, substructure work is often one of the most challenging elements to measure. In this paper, the author demonstrates the process of measuring basic substructure designs. The approach involves providing solutions to a sample of four Irish Department of Education Technological Certificate: Builders’ Quantities Intermediate Stage examinations. The intention is to demonstrate how …

Mechanical And Thermal Evaluation Of Different Types Of Pcm-Concrete Composite Panels, Dervilla Niall, Oliver Kinnane, Roger West, Sarah Mccormack

Conference papers

ABSTRACT: Thermal mass indicates the ability of a material to store and release heat and is a function of the heat storage capacity of a material. The thermal mass of construction materials can be used to reduce the energy required for heating and cooling buildings. The heat storage capacity of concrete can be increased by incorporating phase change materials (PCMs) into the concrete and hence providing additional latent heat storage capacity. Research was carried out to compare the thermal behaviour of two different types of PCM/concrete composite panels. The first type of panel was formed by adding microencapsulated paraffin to …

The Role Of The Contract Administrator Under The Principal Irish Standard Forms Of Building Contract, Tony Cunningham

Other Resources

Construction contract administration concerns the effective execution of construction contracts. The primary objectives of the individual appointed to administer a building contract typically include delivering the project safely, to the specified quality standards, on time, and within the employer’s budgetary constraints. The administrator’s task is to orchestrate and motivate the various designers and constructors to deliver the best possible performance both individually and as members of the team. This study has investigates the contribution made by the contract administrator in administering construction projects and outlines the decision-making, advisory and information roles undertaken by the contract administrator in the context of …

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Bs News July/August

Building Services Engineering

No abstract provided.

Bim And Communication: Implementation Of Building Information Modeling Into An Integrated Project Delivery Contract To Encourage Project Teams To Communicate, Kathleen Worden

Master's Theses

The objective of this thesis is to explore BIM, IPD and their implementation into a building project contract. The Integrated Delivery Processes is comprised of a collaborative team of Designers, Constructors, and Owners working side by side to create a successful project. BIM has been introduced as a technology into the industry, as a tool that these parties can use for better understanding the project.

Through case studies of IPD projects using BIM are observed, it was determined that although BIM was used, one problem faced is the lack of BIM standards included initially in a contract for in an …

The Chorro Valley Trail From Cal Poly To Cuesta College, Nichole M. Garner

City and Regional Planning

No abstract provided.

Case Study: Epoch Estate Wines Production Facility, Kevin Christopher Marx

Architectural Engineering

The project will be a case study performed on Epoch Estate Wines Production Facility in Templeton California. The building is a cut and cover project which was designed to hug the existing oak trees on site. The building serves as a capstone to the Architectural Engineering curriculum because it seamlessly combines the four main structural building materials: steel, concrete, masonry and timber, while also including every lateral force resisting system into one succinct project. During the design of the project, meetings with the architecture of record and client representative occurred where discussion about design procedure and client’s needs took place. …

Rammed Earth Compressive Testing Using Soils From San Luis Obispo, Nicholas J. D'Ambra

Construction Management

Rammed earth is a sustainable building technique that has been around for thousands of years, and is still being used today. It minimizes environmental impacts by reducing the need for the many resources we use to produce building materials. The purpose of this paper is to test soils in San Luis Obispo to see if they contain the strength characteristics needed to build structural components using rammed earth. After the soils have been collected they will be mixed with a small percentage of cement, and compacted into test cylinders. A compressive test will be conducted after 7 days, and the …

A Survey Of Student Interest In Construction Management Students’ Involvement In Design Village Competition, Candace Nicole Stephens

Construction Management

Included in this paper are the results of two surveys that were designed to assess student interest in Construction Management students’ participation in the annual Design Village Competition hosted by Cal Poly every spring. Sixty-five Architecture and Architectural Engineering, and thirty Construction Management undergraduate students completed these surveys at the College of Architecture and Environmental Design (CAED), Cal Poly San Luis Obispo. The overall student interest level in both groups was majority positive. To delve deeper into potential benefits and obstacles on this subject, along with quantitative data from the surveys, there is also qualitative data from faculty member interviews, …