Construction Engineering Commons^™

Higher Sound Levels In K-12 Classrooms Correlate To Lower Math Achievement Scores, Laura Caroline Brill, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Sound levels from occupied classrooms have been gathered from 220 classrooms across four grade levels (3, 5, 8 and 11) over six school days each and processed with k-means clustering into speech and non-speech clusters. Three metrics describing the classroom acoustics, including the average daily A-weighted equivalent level for non-speech, the average daily difference between the A-weighted equivalent levels for speech and nonspeech (a signal to noise ratio), and the mid-frequency averaged reverberation time, were analyzed against classroom-aggregated standardized reading and math achievement test scores, while controlling for classroom demographics including socioeconomic status. Interactions between the metrics and demographics were …

Umass Dartmouth Science And Engineering (Seng) Building Systems Upgrades Project, Jillian Cornelius

UMassBRUT Community

Although UMass Dartmouth's Science and Engineering Building has long been viewed as an architectural treasure, its aging interior and structure have presented some challenges to users nearly 50 years after it opened. This talk examines Ellenzweig's extensive retrofitting of the UMass Dartmouth SENG building for accessibility, a new envelope, updated MEP, and fire-safety measures. After looking at the design phase and interactions with the Mass Historic Commission, the talk ends with an examination of the replacement of windows in the building.

Brutalist Structures – Polychlorinated Biphenyls, Theresa Wolejko

UMassBRUT Community

Until they were banned by the Federal Government in 1978, Polychlorinated Biphenyls or PCBs, were used extensively as sealants in Brutalist structures across the United States. As a result, these hazardous chemical compounds still reside in concrete buildings and present a danger to those looking to clean or renovate Brutalist structures. This talk explains the problems the University of Massachusetts Amherst has faced in dealing with PCBs over the last couple of decades and recommends some best practices for owners, designers, builders working on midcentury buildings which are suspected to contain these dangerous chemicals.

Concrete Deterioration And Diagnosis, Matthew B. Bronski

UMassBRUT Community

Built primarily in the 1960’s, mid-century modernist concrete buildings are now at the age when we regard many as historic or architecturally significant (and thus as deserving of careful restoration and stewardship), but also at an age where many now exhibit significant deterioration. In this presentation, Matthew Bronski describes the most common maladies and deterioration mechanisms that can befall exposed concrete facades, outlines investigative and diagnostic approaches, and discuss the pros and cons of different rehabilitation treatment options, and the importance of tailoring the treatment to the malady.

Concrete Diagnostics & Assessment, Michael Schuller

UMassBRUT Community

The process of repairing Brutalist architecture begins with diagnosis and assessment of the material conditions of these buildings. This talk focuses on the processes that engineers undertake in order to document and access historic concrete before conservators and designers can form a plan to save such buildings. The speaker gives insight into the diagnostic techniques, such a visual assessment, nondestructive evaluation, sounding, moisture and metal detection, and chemical analysis.

Concrete Conservation Strategies And Repair, Paul Gaudette

UMassBRUT Community

Drawing on the speaker's many years in the field, this talk gives a comprehensive overview of concrete conservation. Beginning with the goals and approaches to conserving concrete, the talk then covers common protection systems, petrographic and chemical studies, and the design of mixes used in repairs. In order to demonstrate these techniques, two case studies are examined, including a Brutalist building and building with architectural precast. The talk ends with some recommendations on how to best approach cleaning and conservation of historic concrete buildings.

Lessons Learned From Personal Experience In Adaptive Reuse, Blake Jackson

UMassBRUT Community

This presentation details themes, regarding sustainability, from three adaptive reuse projects of Brutalist and post-war Modernist structures, accentuating overlaps with sustainability, embodied carbon, preservation, densification, and urbanization – all hallmarks regarding the adaptive reuse of these buildings. The first project illustrates opportunities created by up-branding a 1970’s era Sheraton into a “new” W Hotel (Midtown, Atlanta), whereby the preservation of the concrete playfully juxtaposed new interior/exterior design elements. The second project looks at the transformation of a purpose-built newspaper headquarters into a “new” LEED/Fitwel certified commercial facility, which reknit previously separated neighborhoods into a pedestrian/transit-oriented destination, serving as a catalyst …

Approaches To Renewing Brutalist-Era Lab Buildings, Jean Caroon

UMassBRUT Community

Given the immense amount of embodied carbon that mid-century Brutalist structures represent, we must redirect our focus from demolishing these concrete structures to renovating them to fit our needs in the 21st century. Higher education laboratory buildings from the 1960s and 1970s are a particularly challenging type of facility. This talk describes the work that Boston architecture firm Goody Clancy has recently undertaken in renovating over 1 million square feet of lab building space. The talk not only covers specific retrofits and envelope improvements to science buildings, such as the Gant Science Complex at the University of Connecticut in Storrs, …

Modern Heritage: Why It Matters, And What Gci Is Doing To Help Conserve It, Chandler Mccoy

UMassBRUT Community

The Getty Conservation Institute entered the field of conserving modern heritage in 2013, with the establishment of its Conserving Modern Architecture Initiative (CMAI). The CMAI aims to advance the practice of conserving modern heritage and feels that the best way to retain and reuse modern buildings is by knowing how to maintain, repair and upgrade them, and does this by providing useful tools, case studies, and training to help promote this effort. There has recently been a wave of notable demolition cases which raises the question about the environmental impact of replacing existing buildings with new ones, with many concerned …

The Effects Of The Visual Environment On K-12 Student Achievement, Michael Kuhlenengel, Iason Konstantzos, Clarence E. Waters

Durham School of Architectural Engineering and Construction: Faculty Publications

The varying indoor environments among educational buildings can have an impact on students’ ability to learn. This study looks at field data from 220 classrooms in the Midwest, United States, over a two-year period, to analyze the effects of the visual environment on student achievement. The visual environmental metrics considered within this scope include the three new view metrics introduced within the EN 17037 “Daylight of Buildings” standard (Horizontal Sight Angle, Outside Distance of View, and Number of View Layers), as well as standard daylight and electric lighting metrics, focusing on light availability and glare. To capture student achievement, math …

Twisted Buildings: Concepts And Approaches, Amani Marmar, Sally Zouia, Sahar Ismail, Ahmad Hallik

Architecture and Planning Journal (APJ)

With the emerging of new technologies, the look for more sustainable towers appears. Through designing twisted towers, an aerodynamic and energy efficient structure can be made to reduce materials and wind loads towards it. By definition, a twisted building is one that has gradually rotating floor plates along its height. The problem here rises due to the risk of structural failure and lack of load transfer and unorganized interior function. Thus, this research aims to detect the design solutions used to execute the twisted buildings achieving stability, safety, and withstanding climatic effects. In order to accomplish the mentioned aim, the …

Potentials Of Containers In Creating Modular Architectural Spaces, Karim Al-Khatib, Jinan Makkawi, Ali Kobeissi

Architecture and Planning Journal (APJ)

Containers are currently considered as one of the inventive trends of framing architectural objects. Container architecture is defined as the type of architecture that is characterised by the usage of steel containers as a structural elements and architectural envelope that can be presented as a part of architecture or a function that an activity can happen in it. Due to the specific dimensions that the container has, architects tend to use it to obtain modularity in their projects and the modular design strategies refer to using the containers as a standard unit to carry out the process, these containers are …

3d Printed Concrete & Polymer Concrete For Infrastructure Applications, Daniel Heras Murcia

Civil Engineering ETDs

Additive manufacturing technology has been established as one of the fastest-growing building technologies worldwide. Three-dimensional concrete printing (3DCP) has developed an increasing interest in the last decade due to its prospects as a transformative technology for industries such as the concrete precast. Besides the improvements in automation technologies in construction, traditional construction has faced considerable challenges: high accident rates, labor dependency, significant potential for automation, and high costs associated with the use of traditional formwork. In this context, three-dimensional concrete, also referred to as physical prototyping, is a novel construction technique in which the concrete is extruded layer-to-layer. 3DCP is …

Simulation For A Mems-Based Ctrnn Ultra-Low Power Implementation Of Human Activity Recognition, Muhammad Emad-Ud-Din, Mohammad H. Hasan, Roozbeh Jafari, Siavash Pourkamali, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper presents an energy-efficient classification framework that performs human activity recognition (HAR). Typically, HAR classification tasks require a computational platform that includes a processor and memory along with sensors and their interfaces, all of which consume significant power. The presented framework employs microelectromechanical systems (MEMS) based Continuous Time Recurrent Neural Network (CTRNN) to performHAR tasks very efficiently. In a real physical implementation, we show that the MEMS-CTRNN nodes can perform computing while consuming power on a nano-watts scale compared to the micro-watts state-of-the-art hardware. We also confirm that this huge power reduction doesn’t come at the expense of reduced …

Framework To Develop Time- And Voltage-Dependent Building Load Profiles Using Polynomial Load Models, Andrew Parker, Mhd Anas Alkrch, Kevin James, Ahmad Almaghrebi, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The power consumption of buildings over the course of each minute, hour, day and season plays a major role in how this load influences the Electric Power System voltage and frequency, and vice versa. This consumption is based on the building's load component types, efficiencies, and how they consume power and react to changes in real time. Due to this complexity, standard full-building load models are typically voltage-invariant. This paper proposes a novel framework to transform these voltage-invariant building load models into fully time- and voltage-dependent load profiles using available data on the voltage sensitivity of individual load components. While …

A Case Study To Quantify Variability In Building Load Profiles, Andrew Parker, Sam Moayedi, Kevin James, Dongming Peng, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Recent technology development and penetration of advanced metering infrastructure (AMI), advanced building control systems, and the internet-of-things (IoT) in the built environment are providing detailed information on building operation, performance, and user's comfort and behavior. Building owners can obtain a wide range of energy consumption details at various levels of time granularity to augment their decisions as they manage the building operation and interact with the grid. AMI data are providing a new level of detail and visibility that may enhance building services and assets in the smart grid domain and make buildings inch closer to becoming a grid-interactive energy …

Digital Construction And Bim Research In Ireland 2016-2020, Barry Mcauley, Roger P. West, Alan V. Hore

Conference papers

As the construction industry opens up post pandemic, new and significant challenges will demand considerable expertise, not least in financial viability, solving the housing crisis and facing the very significant climate change pressures to make the industry less wasteful and less carbon intensive. This presents an excellent opportunity to further inculcate aspects of lean construction, particularly BIM into many aspects of construction not traditionally associated with digital construction, provided the necessary expertise is available and known to exist. Following a well-received recent conference paper summarising BIM-related research published by academics in Ireland’s higher education institutions in 2020, this paper will …

Evaluating Prediction Models Of Creep And Drying Shrinkage Of Self-Consolidating Concrete Containing Supplementary Cementitious Materials/Fillers, Micheal Asaad, George Morcous

Durham School of Architectural Engineering and Construction: Faculty Publications

Supplementary cementitious materials (SCMs) and fillers play an important role in enhancing the mechanical properties and durability of concrete. SCMs and fillers are commonly used in self-consolidating concrete (SCC) mixtures to also enhance their rheological properties. However, these additives could have significant effects on the viscoelastic properties of concrete. Existing models for predicting creep and drying shrinkage of concrete do not consider the effect of SCM/filler on the predicted values. This study evaluates existing creep and drying shrinkage models, including AASHTO LRFD, ACI209, CEB-FIP MC90-99, B3, and GL2000, for SCC mixtures with different SCMs/fillers. Forty SCC mixtures were proportioned for …

Designing Gfrp-Reinforced Tilt-Up Wall Panels, Fray F. Pozo-Lora, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Tilt-up construction was effectively enabled on a wide scale in 1979, when the ACI committee 551 report on Tilt-up construction was published, the Recommended Tilt-Up Wall Design, aka, the Yellow Book and the subsequent ACI-SEASC Task, aka the Green Book, and another Tilt-up design and construction manual developed by the ACI in 1988. The Tilt-up Concrete Association was created in 1986 by a group of industry professionals who had the need of an organization dedicated to the industry. ACI 551 maintains a document outlining the standard practice for contemporary Tilt-up design and construction. The ACI 551 document does not consider …

The Facility Infection Risk Estimator™: A Web Application Tool For Comparing Indoor Risk Mitigation Strategies By Estimating Airborne Transmission Risk, Marcel Harmon, Josephine Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

The COVID-19 pandemic created needs for (a) estimating the existing airborne risk of infection from SARS-CoV-2 in existing facilities and new designs and (b) estimating and comparing the impacts of engineering and behavioural strategies for contextually reducing that risk. This paper presents the development of a web application to meet these needs, the Facility Infection Risk Estimator™, and its underlying Wells–Riley based model. The model specifically estimates (a) the removal efficiencies of various settling, ventilation, filtration and virus inactivation strategies and (b) the associated probability of infection, given the room physical parameters and number of individuals infected present with either …

Performance Evaluation Of A Prestressed Belitic Calcium Sulfoaluminate Cement (Bcsa) Concrete Bridge Girder, Nick Markosian, Raed Tawadrous, Mohammad Mastali, Robert J. Thomas, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Belitic calcium sulfoaluminate (BCSA) cement is a sustainable alternative to Portland cement that offers rapid setting characteristics that could accelerate throughput in precast concrete operations. BCSA cements have lower carbon footprint, embodied energy, and natural resource consumption than Portland cement. However, these benefits are not often utilized in structural members due to lack of specifications and perceived logistical challenges. This paper evaluates the performance of a full-scale precast, prestressed voided deck slab bridge girder made with BCSA cement concrete. The rapid-set properties of BCSA cement allowed the initial concrete compressive strength to reach the required 4300 psi release strength at …

Discrete Rigid Block Analysis To Assess Settlement Induced Damage In Unreinforced Masonry Façades, Ryan Ehresman, Nathan Taylor, Bora Pulatsu, Ece Erdogmus

Durham School of Architectural Engineering and Construction: Faculty Publications

In this study, a system of discontinuous rigid blocks is employed to simulate the possible damage mechanisms in unreinforced masonry (URM) façades and load-bearing frame systems subjected to settlement using the discrete element method (DEM). First, the employed modeling strategy is validated utilizing the available experimental results presented in the literature. Once there is a good agreement between the computational models and experimental findings, a sensitivity analysis is performed to quantify the influence of the input parameters defined in the DEM-based numerical model. Finally, the proposed modeling strategy is further utilized to assess the damage pattern that may develop in …

A Comparison Between Ultrasonic Guidedwave Leakage And Half-Cell Potential Methods In Detection Of Corrosion In Reinforced Concrete Decks, Ahmad Shoaib Amiri, Ece Erdogmus, Dana Richter-Egger

Durham School of Architectural Engineering and Construction: Faculty Publications

This article presents the advantages and limitations of a recently developed Ultrasonic Guided Wave Leakage (UGWL) method in comparison to the well-known Half-Cell Potential (HCP) method in their ability to detect corrosion in reinforced concrete (RC) bridge decks. This research also establishes a correlation between UGWL data and chloride content in concrete RC slabs. Concrete slabs submerged in a 10% NaCl solution were monitored using both methods over a period of six months. The chloride content from the three cores (0.84, 0.55, and 0.18%) extracted from the slab after the 6-month long process all exceeded the chloride threshold values suggested …

Assessment Of Carbon Dioxide Emission And Its Impact On High-Rise Mixed-Use Buildings In Egypt, Ahmed Salah Hamza

Theses and Dissertations

With Egypt's vision of 2030 focusing on sustainable development with a true emphasis on Carbon Dioxide (CO₂) emission reduction in the newly built cities and high-rise buildings, efforts are exerted on various levels towards accomplishing the vision’s goals. This is achieved through multiple tools and models associated with aiding the reduction of carbon emissions, yet not a clear one was introduced for the mixed-use buildings in Egypt.

Through this work, a significant gap was identified with respect to high-rise buildings carbon emission assessment in Egypt. This was a main driving force for this work in an attempt to …

The Nolan House, Keiko-Ann K. Sanders, Gilbert C. Munoz, Michael A. Bahr, Titas Kalvalnis

Architectural Engineering

As a precedent, The Green Team analyzed the history of glass architecture, literature, and culture. Based on our research, we found that glass is often depicted as breakable, delicate, and a way to expose or display aspects that would otherwise be hidden. We challenged ourselves to incorporate safety and privacy into our glass house as a way to combat the pre-existing notions of glass in architecture.

Reconceptualizing Mies' Glass House, Araceli Avelar, Armando Castaneda Jr, Madison Lam, Ignatius Malari, Alejo Favero, Augusta Orlauskaite, Ella Gleason

Architectural Engineering

Our team used the glass house studio to explore class stratification, particularly using the glass as a reflection of class dichotomy in our society. The glass and Miesian design approach glorifies the clean cut, picture-perfect utopia only accessible to the wealthy few. But reality proves that there is more to this. As architects and engineers, we should strive to create environments that may uphold our values of equity and diversity and ultimately serve all sectors of society.

Take Heart School, Quentin John Porter

Architectural Engineering

Journeyman International, also known as JI, is a non-profit organization that groups together design and construction students with organizations looking to build humanitarian projects around the world. This pairing is beneficial for both the organization because they get free design and construction expertise, as well as for the students who get real-world experience. The Take Heart School is a planned school and grounds for the region of Migori Kenya. Take Heart Africa is a fair trade store with all profits going to help the impoverished communities of Kenya. The three-acre site will have a school with eight classrooms, offices, a …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Aly Mousaad Aly, Faiaz Khaled

Faculty Publications

Large-eddy simulation (LES) has proven to offer superior accuracy in regards to predicting surface pressures compared to the Reynolds-averaged Navier Stokes (RANS) models. However, the primary impediment is the high computational cost associated with LES. The authors attempt to investigate the computational cost and accuracy by employing different sub-grid scale (SGS) models in LES and hybrid RANS-LES models. One of the prerequisites of accurate pressure estimations is to ensure a horizontally homogeneous empty computational domain. This study aims to compare the computational competence qualitatively and quantitatively using an empty domain in regards to the ability to maintain horizontal homogeneity. The …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

No abstract provided.

Exploiting Pull-In/Pull-Out Hysteresis In Electrostatic Mems Sensor Networks To Realize A Novel Sensing Continuous-Time Recurrent Neural Network, Mohammad H. Hasan, Amin Abbasalipour, Hamed Nikfarjam, Siavash Pourkamali, Muhammad Emad-Un-Din, Roozbeh Jafari, Fadi Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

The goal of this paper is to provide a novel computing approach that can be used to reduce the power consumption, size, and cost of wearable electronics. To achieve this goal, the use of microelectromechanical systems (MEMS) sensors for simultaneous sensing and computing is introduced. Specifically, by enabling sensing and computing locally at the MEMS sensor node and utilizing the usually unwanted pull in/out hysteresis, we may eliminate the need for cloud computing and reduce the use of analog-to-digital converters, sampling circuits, and digital processors. As a proof of concept, we show that a simulation model of a network of …