Digital Commons Network^™

A Theoretical Model For Biased Superlattice Devices, Michael Ferner

Theses

A model describing the subband structures and tunneling characteristics of superlattices is presented. The model solves the envelope function equations by the transfer matrix technique. The results are codified in a Fortran program, and the model is applied to several structures.

Superlattice have been studied extensively, however many new structures await investigation.

This model is presented as a preliminary design tool. The program allows a designer to do preliminary calculations. This type of investigation guides a designer toward a goal by making possible a large number of calculations on many different structures.

Jan Tschichold: Contrast In Theory, Thérèse Hannigan

Theses

Jan Tschichold was a brilliant typographer who dramatically influenced graphic design and printing with his contrasting theories of design. He began as a proponent of the so-called "new typography" and then pursued the revival of more traditional styles. Because Tschichold's diametrically opposed theories about typography continue to appeal to a large audience, this exhibit of his evolution as a typographer is useful and important. This exhibit is an overview of his writings and typography concentrating on his dramatic stylistic changes. The exhibit is accompanied by a poster, annotated catalog, and descriptive labels.

The Contemporary Vessel, Alice Carroll

Theses

None provided.

Suprem-Ii Analysis Of The Phosphorus Planar Diffusion Source Ph 1000n, Paul M. Whalen

Theses

The phosphorus planar diffusion source, PH-1000N, was used to test the ability of the process simulation program SUPREM-H to accommodate solid source diffusion. Spreading resistance analysis and secondary ion mass spectrometry (SIMS) were used to determine the impurity concentration profiles of phosphorus diffused into p-type silicon. Sheet resistance and junction depth data, in addition to the impurity concentration profiles, were plotted against the respective data generated by SUPREM. The surface gas concentration, a parameter requested by SUPREM's input file, was found to have the strongest influence on the program's output. The solid solubility of phosphorus in silicon at process temperatures …

A Catalogue Of The Wood Type At Rochester Institute Of Technology, David P. Wall

Theses

None provided.

Line Reproduction In Mapping Utilizing The Four Color Process Model, John R. Handy

Theses

The application of the four-color process to printing fine line work found on topographical maps was investigated. A description of the mapping process is included and the reason why the four-color process would be advantageous to cartographic printing was discussed. The chapter on fourcolor process theory was included for the benefit of the cartographic community - The experimental design for data transfer, color tolerance, target design to match spot and process color, as well as color space employed, were reviewed. The reasons for the use of a direct digital proofing system were explained. The results of data transfer were evaluated …

N-Well Cmos Process Integration, David T. Price

Theses

The predominant integrated circuit fabrication technologies used for VLSI devices are CMOS, and BiCMOS. The goal of this work was to develop a CMOS process that could be converted into a BiCMOS technology. For this reason an N-Well CMOS process was selected, and fabricated in the Microelectronic Engineering clean room. This paper reviews the test chip design, process simulation, fabrication, and electrical characterization of this process. The device fabrication was successful, and the electrical testing clearly indicated what measures need to be taken to improve the process.

Investigations On Thin Film Polysilicon Mosfets With Si-Ge Ion Implanted Channels, Luigi Ternullo

Theses

Thin Film Transistors have been fabricated in 0.2 urn thick polycrystalline silicon. NMOS and PMOS devices were fabricated on four groups of substrates. One group was processed with as deposited polysilicon and three of the substrates received high dose implants of Si and/or Ge prior to anneal. The Si implants were designed to amorphize the film by a process known as Seed Selection through Ion Channeling (SSIC), and the Ge was implanted just below the surface to enhance transistor characteristics. Two of the groups, one which received Ge implanted just below the surface and the other no implant at all, …

Performance Of Edge Operators Under Varying Imaging Conditions, Ching-Wei Chang

Theses

A method has been devised for performing edge operations with various edge operators under varying imaging conditions and for quantitatively comparing the results of each edge operator. Both computer-simulated targets and real targets are employed, and experiments in both cases showed that the Sobel operator and Kirsch Compass Gradient Mask are better than the Highpass and Laplacian filters in the performance of edge operation.

Posterior Stabilized Knee Design Biomechanical Considerations, Donald E. Mcnulty

Theses

Numerous posterior stabilized knee systems are available for primary and revision total knee arthroplasty. Design of these systems requires an understanding of the articulating geometries and kinematic/kinetic biomechanical considerations of the normal knee. The findings for the normal knee are integrated into the design of a prosthetic system.

The natural femoral, tibial and patella articulating geometries are defined to enable subsequent kinematic and kinetic analyses. The articulating geometries are characterized from review of anthropometric studies of the tibiofemoral and patellofemoral joint.

The kinematic analysis of the natural knee defines knee motion in terms of rotation, adduction/abduction, range of motion and …

Cost Deployment Based On Quality Function Deployment, John Goceljak

Theses

A methodology for Cost Deployment based on Quality Function Deployment (QFD) architecture is developed and explained. Following a comprehensive review of Quality Function Deployment terminology and composition, a house-of-quality is developed, and matrix correlation methodologies are discussed. Current applications are presented to illustrate the scope and adaptability of this quality assurance tool. In addition, an exercise in product design and review is conducted to illustrate a unique approach to cost deployment. Quality Function Deployment issues, including software, consulting, and preferred practices are also presented.

Planning Of Optimal Transit System Design, Yongning Liu

Theses

This study presents a methodological approach for finding an optimal design of bus transit service in an urban transportation corridor with elastic demand and under various objective functions. Service design decision variables to be optimized include the route length, route density, headway, number of stops and stop spacing pattern. The objective functions that optimize the transit system design include: minimizing operator cost, maximizing profit, minimizing sum of operator and user costs and maximizing the users' net benefits.

The analysis uses an elastic demand function wherein the number of trips are sensitive to the quality of service provided and price charged …

Adaptive Map Configuration And Dynamic Routing To Optimize The Performance Of A Satellite Communication Network, Santhalingam Balasekar

Theses

Availability of alternate routes are shown to enhance the performance of non-hierarchical circuit switched networks at moderate load conditions on which the networks typically operate. But alternate routes introduce instability at heavy and overloaded conditions and at these load conditions the network performance is found to deteriorate. To alleviate this problem, one of the control mechanism used is to reserve a fraction of the capacity of each link for direct routed calls. In this work, the feasibility of changing the facilities of a satellite network is taken advantage in optimizing the performance of such a network. A mesh connected, circuit …

The Acoustic Properties Of Human Femoral Bone, Mark Lacianca

Theses

Over the last decade, interest has grown in the use of the scanning acoustic microscope (SAM), with a single lens being used for both transmitting and receiving the acoustic signal. A major objective of this thesis was to determine if the transmission and ultrasonic techniques yield similar "quantitative" results, when measuring the elastic constants of human femoral bone. The transmission technique has been used since 1970 to yield values for the elastic properties of calcified tissue. Previously the SAM has been used as a qualitative tool, where an acoustic impedance map is produced. This map can show areas of bone …

Porting Cosmos Expert System From Unix To Dos, Ching-Jeng Chiu

Theses

COSMOS is an object-oriented Knowledge Based System building Tools (KBSTs) to solve problem in engineering industry. COSMOS stands for C++ Object-oriented System Made for expert System development.

In order to provide more people those who don't have a Sun workstation to use this expert system, our task is porting COSMOS form UNIX to DOS.

Because the differents of workstation environment, the user interface and structure of original COSMOS no longer can be used, therefore we made some necessary change before we porting it to IBM Personal Computer.

In stead of X Window system®, we implemented ObjectWindows® runs on Microsoft WindowsTM. …

Automatic Surface Mount Solder Joints Inspection, Zhu Liu

Theses

This thesis reports the research results on automatic inspection of solder joints on printed circuit boards. The previous work on this subject has been advanced significantly in the following three aspects. With the support of AT&T Bell Lab, the most updated surface mount solder joints are inspected in this work instead of larger simulation solder joints or traditional through hole solder joints in the previous work. A small set of features is extracted for surface mount solder joints in both infrared and visual light inspection. A new image processing software named Khoros has been applied to improve the quality of …

Mineralization Of 2-Chlorophenol Using A Hollow Fiber Ultrafiltration System In Combination With A Reactor Containing An Immobilized White Rot Fungus, Sheau-Ming Tung

Theses

Phanerochaete chrysosporium, a white rot fungus was immobilized on a packed-bed reactor, and was used to mineralize an aqueous stream contaminated with 50 ppm of 2-chlorophenol. Hollow fiber ultrafiltration membranes (for 5,000 daltons and 10,000 daltons molecular weight cut-oft) were utilized to retain the extracellular enzyme resulting from the immobilized fungus in a recirculation loop outside of the reactor.

It was found here that the concentration of proteins (roughly proportional to the extracellular enzyme releasd by the fungus) does not correlate with the rate of degradation of 2-chlorophenol in the system. The protein was concentrated 1.5 fold in the recycle …

Catalytic Ozone/Ultraviolet Light Oxidation Of Organics In Water : Integrated Charcoal/Ozonation/Uv Radiation, Dawei Wang

Theses

A novel heterogeneous catalytic-oxidation technology where activated carbon is used as a catalyst-adsorbent, ozone serves as the oxidant and UV light as activation agent, is developed in a lab scale study. We demonstrate this process for destruction of recalcitrant organics in water i.e: combined oxidation by ozone, UV light plus activated carbon. The investigation includes evalution of various operating conditions: ozone levels, activated carbon levels; time for complete destruction of the individual target pollutants, plus evalution of activity of the continuously recativated carbon surface in-situ. All experiments were performed at room temperature in a semi-batch reactor. Seven representative chemicals was …

Automatic Motion Analysis Of Colliding Spheres, John Vijayakumar Caesar

Theses

Motion analysis is useful to compute linear and angular velocities and acceleration of an object from a sequence of images. This thesis is part of an investigation to compute the translation and rotation velocities needed to determine the collision parameters of two colliding spheres. This involves the tracking of the spheres and feature points on the spheres over a time interval. An experimental setup releases two spheres such that they collide and a high speed imaging system, i.e., Kodak Ektapro 1000 is utilised to record the motion of the spheres. The imaging system is capable of recording at a speed …

Point Pattern Matching By Heuristic Methods : A Genetic Algorithm And Simulated Annealing, Erh-Chin Chen

Theses

The problem we consider is to find a subset of points in a pattern that best match to a subset of points in another pattern through a transformation in an optimal sense. Exhaustive search to find the best assignment mapping one set of points to another set is, if the number of points that are to be matched is large, computationally expensive. We propose two stochastic searching techniques - a genetic algorithm and simulated annealing to search for the best ("almost the best") assignment efficiently. To make the comparison between GA and SA fair, we introduce a piece-wise linear cooling …

A Theoretical Study Of The Subband Structures And Tunneling In Polytype Heterostructures, Hong Chen

Theses

A theoretical study of the electronic and optical properties in polytype heterostructures is presented in this thesis.

In the first part of the thesis (Chap. 2 and Chap. 3), an explicit expression for calculating the subband structure and tunneling is formulated by the incorporation of the envelope function approximations and the transfer matrix technique. It is based on the k*p theory as done to date, but contains two significant improvements: a more realistic treatment of the spatial and energetic dependance of effective masses and band edges; the availability of the calculations, in favor of direct numerical evaluation, to various quantum …

Uses And Applications Of Artificial Intelligence In Manufacturing, Manojkumar H. Desai

Theses

The purpose of the THESIS is to provide engineers and personnels with a overview of the concepts that underline Artificial Intelligence and Expert Systems. Artificial Intelligence is concerned with the developments of theories and techniques required to provide a computational engine with the abilities to perceive, think and act, in an intelligent manner in a complex environment.

Expert system is branch of Artificial Intelligence where the methods of reasoning emulate those of human experts. Artificial Intelligence derives it's power from its ability to represent complex forms of knowledge, some of it common sense, heuristic and symbolic, and the ability to …

The Durability Of Hot Mix Asphalt With Petroleum Contaminated Soils, Bonnie H. Dubose

Theses

Petroleum contaminated soils are considered solid waste They must be taken to solid waste facilities such as landfills or some other method must be found to deal with them. Landfills are becoming limited and is looked upon by the government as the least attractive option. One method that looks promising is to use petroleum contaminated soils in Hot Mix Asphalt Concrete.

In the research program the following are examined: 1) Investigation of material properties of the petroleum contaminated soil and aggregates 2) The proper procedure to produce a design blend of asphalt concrete. 3) Establishing the test procedure protocol to …

The Collapse Of The Cypress Viaduct During The Loma Prieta Earthquake Of October 17, 1989, Mohamed M. Eid

Theses

The Loma Prieta earthquake of October 17, 1989 in California was one of the most disastrous earthquakes in U.S history. It caused damage to commercial, residential, and industrial structures, transportation and utilities.

This study includes investigations about the Cypress Viaduct collapse re?ported by:

1. California Governor's Board of Inquiry [4].
2. National Institute of Standards and Technology (NEL) W.
3. 3The Author.

Investigators in the first report concluded that the collapse was due to horizontal ground motion. In the second one, it was due to the vertical ground motion.

In the author's investigation, a detailed static and dynamic analyses are performed to determine …

Performance Analysis Of Queueing Systems With Synchronous Server, Wonmu Hur

Theses

The performance measures are derived for a queueing system which is characterized by its synchronous server operations. This property is the one which normal queueing systems lack. A system of this nature contains a single common server to which multiple number of buffers are connected in parallel, where the server operates only when all system buffers are occupied.

In this thesis, the analysis is carried out focusing on the simplest system involving only two buffers. Throughout the analysis, a symmetricity of the system is assumed (i.e., system is symmetrical in terms of arriving customer statistics.). Also assumed are the Poisson …

Shop Floor Planning And Control In Integrated Manufacturing Systems, Tahir Mahmood

Theses

The implementation of a shop floor planning and control system is a prerequisite in establishing an effective computer integrated manufacturing system. A shop floor control system integrates management production goals with the capabilities and limitations of the manufacturing plant. Shop floor planning begins with a long term rough cut capacity plan and evolves into near term, capacity requirements and input/output plans. Shop floor control provides a status of in-process operations and a measure of the plants success in executing the plan. Effective use of technology on shop floor increases the efficiency of the manufacturing plant. Simulation is an important tools …

An Information Theoretic Approach To Dsn Evaluation, Vivek Mehrotra

Theses

Evaluation of Distributed Sensor Networks (DSN's) for optimal detection using Bayesian cost formulation methods has been the objective of several studies. There have been a few studies on DSN evaluation using an information theoretic approach, wherein an assymetric channel models a detector. We look at the multi-sensor system at the receiver as a black-box and model it as an assymetric channel whose cross over probabilities depend on the probabilties of detection and of false alarm. These probabilities in turn depend on the thresholds of the local detectors and on the fusion rule used. We consider the case wherein the receiver …

Design For Manufacturability And Assembly, Srinivas Mullapudi

Theses

This report presents a study of the various concepts of design for manufacturability and assembly with some case studies, and examples.

The goal of DFM is reduction of parts and simplifying assembly process. A simple faucet has been studied and attempts have been made at re-designing the same using the techniques of design for manufaturability as postulated by Boothroyd, Dewhurst and Henry Stoll.

Development Of The Interface Between Cad And Waterjet Nc Systems, Sivayasivan Sambandan

Theses

There has been a continuous need in the present to develop softwares that provide interface between cutting machines and computer control. There involves a number of complex stages from the birth of an algorithm, to develop such software, till the end where it successfully gets tested and implemented. Cutting Path Simulation (CPS) is a partially developed software designed to model 2-d and 3-d objects and down load them to water jet cutting machine. Additional menus were created in the software to perform specific functions. Bugs that existed in the previously done work were removed. Investigation was conducted on the feasibility …

The Design And Manufacture Of Institutional Trays Using Simultaneous Engineering, Antonio Schmidt

Theses

This study evaluates thermoformed trays as used in the food service industry. The resin used in fabricating trays is a blend of Acrylonitrile Butadiene Styrene (ABS) and Polycarbonate (PC). The life of the trays is presently between 1 to 3 years. The trays are used in correctional facilities and hospitals. The handling of the tray is not abusive. The trays are pulled out of service once they exhibit stress cracking.

To further understand the unpredictable life of the thermoformed trays an understanding of the behavior of the plastics is required and the method of comparing one resin from another, as …