Digital Commons Network^™

Utah Science Vol. 59 No. 3, Summer 1999

Utah Science

2 MAKI NG THE BEST OF MAKING HAY

5 BETWEEN A ROCK AND A HARD PLACE

11 FINDING A NICHE BY GOING ORGANIC

16 FINANCIAL PLANNING DOWN ON THE FARM

20 IN THE COOP

Utah State University Commencement 1999 – Main Campus, Utah State University

Commencement Programs

103rd Annual Commencement of Utah State University

Uptake And Transformation Of Trichloroethylene By Hybrid Poplar: Laboratory Studies, Julie K. Chard

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Trichloroethylene (TCE) was widely used as an industrial solvent and degreasing agent for most of the twentieth century. It is now a widespread groundwater contaminant. Phytoremediation may be a cost-effective cleanup method for TCE-contaminated soils and groundwater. Studies of environmental TCE fate are complicated by its volatility. The literature reports both significant and insignificant plant uptake of TCE. Conflicting findings may be due to differences in exposure level, conditions, and duration of the studies, or to experimental artifacts from laboratory systems.

This research quantified plant uptake and volatilization of TCE using a unique laboratory system. Hybrid poplar trees were exposed …

Prevalence And Possible Causes Of Vitamin B-6 Deficiency Among Women In The Philippines, Siew Sun Wong

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Recently maternal intake of multivitamins has been associated with a reduced risk of orofacial clefts (OFC) in human epidemiologic studies. In the Philippines, vitamin B-6 deficiency was found to be associated with increased risk of OFCs. The birth prevalence of OFCs in the Philippines is among the highest known, but Filipino emigrants in the United States have lower rates, indicating that environmental factors may play an important role in causing OFCs in the Philippines.

The prevalence and possible causes of vitamin B-6 deficiency were investigated through dietary and biochemical assessments in case-control study in Negros Occidental, Philippines. Mothers with OFC …

Interactions And Play Behavior Of Mothers Of Typically Developing Infants And Infants With Disabilities: A Vygotskian Approach, Lisa K. Boyce

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study follows a Vygotskian approach to investigate the influence and relatedness of several "scaffolding" behaviors for mother-infant dyads of both typically developing infants and infants with disabilities and how early intervention may influence the dyads through the home visiting process. For this primarily low-income sample, maternal participation during play did not enhance the infants' play. The relation of infant level of play with maternal education, income, and the maternal involvement variables of level of play and use of scaffolding varied with the disability status of the infant. Home visitor support of mother-infant interaction did not appear to influence maternal …

Preliminary In Vivo Studies Of A New Injectable Bone Substitute, F. Millot, G. Grimandi, P. Weiss, G. Daculsi

Cells and Materials

Calcium-phosphate materials have been increasingly employed in orthopedic and dental applications in recent years and are now being developed for use in noninvasive surgery or as carriers for drug delivery systems. We developed an injectable bone substitute (IBS) for percutaneous orthopedic surgery which uses a biphasic calcium-phosphate (BCP) mixture composed of hydroxyapatite (60%) and ß-tricalcium phosphate (40%), together with a polymer (hydroxy-propyl-methyl-cellulose, HPMC) as a carrier. The best BCP/polymer ratio was determined to achieve the highest mineral phase in the composite and provide the rheological properties required for injectable material.

The in vivo biocompatibility and biofunctionality of IBS were …

Biomimetic Habitats For Cells: Ordered Matrix Deposition And Differentiation In Gingival Fibroblasts Cultured On Hydroxyapatite Coated With A Collagen Analogue, Rajendra S. Bhatnagar, Jing Jing Qian, Anna Wedrychowska, Eric Dixon, Nancy Smith

Cells and Materials

In tissues, cells attach and migrate on collagen. Interaction with collagen modulates cell proliferation and differentiation. We propose that similar environments may be constructed by immobilizing collagen-derived cell-binding peptides in a three-dimensional (3-D) template. We identified a cell binding domain of type I collagen and showed that a 15-residue synthetic analogue (P-15) binds cells with high affinity. In the present study, we compared the behavior of human gingival fibroblasts (HGF) in culture on hydroxyapatite (HA) and on HA-P-15. HGF cultured on HA formed sparse monolayers with little order and deposited a scant matrix. HGF on HA-P-15 formed highly oriented 3-D …

The Role Of Surface Roughness For Implant Incorporation In Bone, A. Wennerberg

Cells and Materials

A careful topographical characterization is important for reliable interpretation of the role of implant surface roughness in bone incorporation. In this paper, the currently available measuring instruments and evaluation techniques are described and discussed first, than literature on the role of surface roughness for cell and bone tissue reactions in vitro and, with special emphasis, the in vivo studies are reviewed. Finally, the results from a series of the authors own animal studies evaluating screw-shaped implants with different surface roughnesses are summarized. The results demonstrated firmer bone fixation for blasted implants than for turned ones. A blasted surface with an …

Mechanical Properties Of Dendritic Pd-Cu-Ga Dental Alloys, Efstratios Papazoglou, Qiang Wu, William A. Brantley, John C. Mitchell, Glyn Meyrick

Cells and Materials

Three Pd-Cu-Ga dental alloys with very similar nominal compositions and dendritic as-cast microstructures were selected for study: Option (Ney Dental) and Spartan (Williams/lvoclar) contain a small amount of boron, while Spartan Plus (Williams/Ivoclar) is boron-free. Bars of each alloy were tested in tension for the as-cast and simulated porcelain-firing conditions, and values of mechanical properties were measured. Fracture surfaces and microstructures of axially sectioned and etched fracture specimens were observed with the scanning electron microscope (SEM). Except for the elastic modulus, significant differences were typically found in alloy properties. Heat treatment eliminated the dendritic microstructure, decreased strength and increased ductility. …

X-Ray Diffraction And Scanning Electron Microscopy Analyses Of A Gallium-Based Dental Restorative Alloy, Randa E. Shaker, William A. Brantley, Qiang Wu, John C. Mitchell

Cells and Materials

Specimens of a gallium-based dental alloy were prepared with different condensation techniques, with and without the removal of a surface layer, and after aging for 2 hours at 50°, 100° and 150°C. X-ray diffraction at times ranging from 10 minutes to 1 day showed the development of the four matrix phases (ß-Sn, CuGa₂, Ga₂₈Ag₇₂, and In₄Ag₉) during the setting reaction. Scanning electron microscope (SEM) examination of specimens loaded to failure revealed brittle fracture, with greater porosity for hand-condensed specimens, and provided insight into crack propagation processes. Aging increased …

Quantifying The Surface Geometry Of Titanium Implant Material By Different Methods Of Analysis, Clara Pimienta, Rashad Tawashi

Cells and Materials

Biomaterial implant manufacturers have used rough surfaces to ensure better biocompatibility, less rejection and better adaptation of implants in the body. Proper characterization of biological interactions and biocompatibility of biomaterials requires a thorough understanding of surface complexity. Surface roughness has often been shown to be important in influencing biological reactions with the surface. Previous communications from our laboratory have described a dynamic active vision system (MVS camera) capable of measuring three-dimensional coordinates of titanium implant material surfaces. Fractal analysis, due to its straightforward relationship to texture, is used to characterize the degree of irregularity of a surface and is expressed …

Effects Of Casting Conditions And Annealing On Microstructures And Vickers Hardness Of Dendritic Pd-Cu-Ga Dental Alloys, William A. Brantley, Qiang Wu, Zhuo Cai, Stanley G. Vermilyea, John C. Mitchell, Michael C. Comerford

Cells and Materials

Three Pd-Cu-Ga alloys with as-cast dendritic microstructures and very similar compositions, two containing less than 1 wt% boron and the third boron-free, were cast with normal bench-cooling or rapid-quenching into water. Quenched specimens were also heat treated at temperatures of 1000°, 1200°, 1500° and 1800°F that span the firing cycles for dental porcelain. Similar values of Vickers hardness were observed for all three alloys, suggesting little effect from boron on yield strength. The hardness was relatively insensitive to the experimental conditions, except for heat treatment at 1500° and 1800°F where significant softening occurred with transformation of the microstructure to Pd …

In Vitro Comparative Biocompatibility Testing Of Carbofilm Coated And Uncoated Polyetherimide For Cardiovascular Application, M. Bosetti, S. Mazzarelli, L. Nicolais, L. Ambrosio, M. Cannas

Cells and Materials

When blood contacts the surface of a material, several processes take place including the activation of coagulation and immune systems. The aim of this work is to study in vitro the biological reactions seen from the point of view of hemocompatibility and cytocompatibility of a new polymer suggested as an artificial surface for cardiovascular applications: Carbofilm® coated polyetherimide (C®PEI) in comparison to polyetherimide (PEI), the uncoated form. PEI and C®PEI showed no signs of acute cytotoxicity although following long term incubation with PEI cytotoxicity was somewhat increased; both materials supported good endothelial cell adhesion with a higher level of cell …