Digital Commons Network^™

14-03 Transportation System And Its Association With Human Health - A Review And Modeling Approach, Jun-Seok Oh, Valerian Kwigizile, Ali Hamzah Hussein Alzuhairi, Fnu Zahid

Transportation Research Center Reports

Transportation systems constitute of infrastructure, commute modes, land use and other policies. The purpose of transportation is to provide easy access to goods and services. While attaining this purpose, impacts of transportation on human health and well-being have been ignored to some extent. Recently, studies have begun analyzing the impact of transportation systems on quality of life and health disparities. While many studies have discussed the impact of the transportation system on individual factors from health, a very limited number of studies have focused on the impact of multiple factors associated with multiple morbidity and mortality forms. The focus of …

15-13 Exploring Bicycle Route Choice Behavior With Space Syntax Analysis, Zhaocai Liu, Anthony Chen, Seungkyu Ryu

Transportation Research Center Reports

Cycling provides an environmentally friendly alternative mode of transportation. It improves urban mobility, livability, and public health, and it also helps in reducing traffic congestion and emissions. Cycling is gaining popularity both as a recreational activity and a means of transportation. Therefore, to better serve and promote bicycle transportation, there is an acute need to understand the route choice behavior of cyclists.

This project explored the applicability of using space syntax theory to model cyclists’ route choice behavior. In addition, several bicycle-related attributes were also considered as influential factors affecting cyclists’ route choice. A multiple regression model was built and …

Evolutionary View Planning For Optimized Uav Terrain Modeling In A Simulated Environment, Ronald A. Martin, Ivan Rojas, Kevin W. Franke, John Hedengren

Faculty Publications

This work demonstrates the use of genetic algorithms in optimized view planning for 3D reconstruction applications using small unmanned aerial vehicles (UAVs). The quality of UAV site models is currently highly dependent on manual pilot operations or grid-based automation solutions. When applied to 3D structures, these approaches can result in gaps in the total coverage or inconsistency in final model resolution. Genetic algorithms can effectively explore the search space to locate image positions that produce high quality models in terms of coverage and accuracy. A fitness function is defined, and optimization parameters are selected through semi-exhaustive search. A novel simulation …

A Validated Tropical-Extratropical Flood Hazard Assessment For New York Harbor, Philip M. Orton, T. M. Hall, Stefan A. Talke, Alan F. Blumberg, Nickitas Georgas, S. Vinogradov

Civil and Environmental Engineering Faculty Publications and Presentations

Recent studies of flood risk at New York Harbor (NYH) have shown disparate results for the 100 year storm tide, providing an uncertain foundation for the flood mitigation response after Hurricane Sandy. Here we present a flood hazard assessment that improves confidence in our understanding of the region's present-day potential for flooding, by separately including the contribution of tropical cyclones (TCs) and extratropical cyclones (ETCs), and validating our modeling study at multiple stages against historical observations. The TC assessment is based on a climatology of 606 synthetic storms developed from a statistical-stochastic model of North Atlantic TCs. The ETC assessment …

Career: Advocating For Engineering Through Hidden Curricula: A Multi‐Institutional Mixed Method Approach, Idalis Villanueva

Funded Research Records

No abstract provided.

Generation Of Vector Partially Coherent Optical Sources Using Phase-Only Spatial Light Modulators, Milo W. Hyde Iv, Santasri Bose-Pillai, David G. Voelz, Xifeng Xiao

Faculty Publications

A simple and flexible optical system for generating electromagnetic or vector partially coherent sources or beams is presented. The alternative design controls field amplitude (beam shape), coherence, and polarization using only spatial light modulators. This improvement makes the apparatus simpler to construct and significantly increases the flexibility of vector partially coherent source generators by allowing many different types of sources to be produced without changing the physical setup. The system’s layout and theoretical foundations are thoroughly discussed. The utility and flexibility of the proposed system are demonstrated by producing a vector Schell-model and non-Schell-model source. The experimental results are compared …

Back-Flow Prevention Strategies For Stormwater Lines, Ron Evins

September 29, 2016: Adaptive Structures and Innovative Solutions

No abstract provided.

Stability And Interfacial Viscoelasticity Of Oil-Water Nanoemulsions Stabilized By Soy 2 Lecithin And Tween 20 For The Encapsulation Of Bioactive Carvacrol, Jerome J. Nash, Kendra Erk

School of Materials Engineering Faculty Publications

The rheology of oil-in-water (O/W) droplet interfaces stabilized by food-grade emulsifiers (soy lecithin or Tween 20) under controlled aqueous conditions was investigated to elucidate its contribution in the kinetic stabilization of nanoemulsion-based delivery systems containing carvacrol, a naturally-derived antimicrobial compound. Dilational rheology of surfactant-laden O/W interfaces was measured using axisymmetric drop shape analysis. The kinetic stability of corresponding nanoemulsions (containing mixtures of carvacrol and medium-chain triglyceride (MCT) oil dispersed in water (pH 7)) was characterized using dynamic light scattering. Zwitterionic lecithin molecules adsorbed to the O/W interface for 24 h formed a notably viscoelastic layer, compared to nonionic Tween 20 …

Viscous Sealing Glass Compositions For Solid Oxide Fuel Cells, Cheol-Woon Kim, Richard K. Brow

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

A sealant for forming a seal between at least two solid oxide fuel cell components wherein the sealant comprises a glass material comprising B₂O₃ as a principal glass former, BaO, and other components and wherein the glass material is substantially alkali-free and contains less than 30% crystalline material.

A Novel Method For Sensorless Speed Detection Of Brushed Dc Motors, Ernesto Vazquez-Sanchez, Joseph Sottile, Jaime Gomez-Gil

Mining Engineering Faculty Publications

Many motor applications require accurate speed measurement. For brushed dc motors, speed can be measured with conventional observers or sensorless observers. Sensorless observers have the advantage of not requiring any external devices to be attached to the motor. Instead, voltage and/or current are measured and used to estimate the speed. The sensorless observers are usually divided into two groups: those based on the dynamic model, and those based on the ripple component. This paper proposes a method that measures the current of brushed dc motors and analyses the position of its spectral components. From these spectral components, the method estimates …

Electrical & Computer Engineering News, Georgia Southern University

Electrical & Computer Engineering News (2014-2023)

• Lim receives Biomedical Seed Grant with Augusta University to Improve Sleep Quality Monitoring for Patients with Parkinson's Disease

Overexpression Of Timp-3 In Chondrocytes Produces Transient Reduction In Growth Plate Length But Permanently Reduces Adult Bone Quality And Quantity, Blandine Poulet, Ke Liu, Darren A. Plumb, Phoung Vo, Mittal Shah, Katherine Ann Staines, Alexandra Sampson, Hiroyuke Nakamura, Hideaki Nagase, Alessandra Carriero, Sandra J. Shefelbine, Andrew A. Pitsillides, George Bou-Gharios

Biomedical Engineering and Sciences Faculty Publications

Bone development and length relies on the growth plate formation, which is dependent on degradative enzymes such as MMPs. Indeed, deletion of specific members of this enzyme family in mice results in important joint and bone abnormalities, suggesting a role in skeletal development. As such, the control of MMP activity is vital in the complex process of bone formation and growth. We generated a transgenic mouse line to overexpress TIMP3 in mouse chondrocytes using the Col2a1-chondrocyte promoter. This overexpression in cartilage resulted in a transient shortening of growth plate in homozygote mice but bone length was restored at eight weeks …

Wave Motion Induced By Turbulent Shear Flows Over Growing Stokes Waves, Shahrdad Sajjadi, Serena Robertson, Rebecca Harvey, Mary Brown

Publications

The recent analytical of multi-layer analyses proposed by Sajjadi et al. (J Eng Math 84:73, 2014) (SHD14 therein) is solved numerically for atmospheric turbulent shear flows blowing over growing (or unsteady) Stokes (bimodal) water waves, of low-to-moderate steepness. For unsteady surface waves, the amplitude a(t)∝ekcita(t)∝ekcit, where kcikci is the wave growth factor, k is the wavenumber, and cici is the complex part of the wave phase speed, and thus, the waves begin to grow as more energy is transferred to them by the wind. This will then display the critical height to a point, where the thickness of the inner …

Nonlinear Characterization Of Gesbs Chalcogenide Glass Waveguides, Ju Won Choi, Zhaohong Han, Byoung Uk Sohn, George F.R. Chen, Charmayne Smith (Lonergan), Lionel C. Kimerling, Kathleen A. Richardson, Anuradha M. Agarwal, Dawn T.H. Tan

Materials Science and Engineering Faculty Research & Creative Works

GeSbS ridge waveguides have recently been demonstrated as a promising mid - infrared platform for integrated waveguide - based chemical sensing and photodetection. To date, their nonlinear optical properties remain relatively unexplored. In this paper, we characterize the nonlinear optical properties of GeSbS glasses, and show negligible nonlinear losses at 1.55 μm. Using self - phase modulation experiments, we characterize a waveguide nonlinear parameter of 7 W-1/m and nonlinear refractive index of 3.71 x 10-18 m2/W. GeSbS waveguides are used to generate supercontinuum from 1280 nm to 2120 nm at the -30 dB level. The spectrum expands along the red …

The Quantum Biology Of Reactive Oxygen Species Partitioning Impacts Cellular Bioenergetics, Robert J. Usselman, Cristina Chavarriaga, Pablo R. Castello, Maria Procopio, Thorsten Ritz, Edward A. Dratz, David John Singel, Carlos F. Martino

Biomedical Engineering and Sciences Faculty Publications

Quantum biology is the study of quantum effects on biochemical mechanisms and biological function. We show that the biological production of reactive oxygen species (ROS) in live cells can be influenced by coherent electron spin dynamics, providing a new example of quantum biology in cellular regulation. ROS partitioning appears to be mediated during the activation of molecular oxygen (O2) by reduced flavoenzymes, forming spin-correlated radical pairs (RPs). We find that oscillating magnetic fields at Zeeman resonance alter relative yields of cellular superoxide (O2•−) and hydrogen peroxide (H2O2) ROS products, indicating coherent singlet-triplet mixing at the point of ROS formation. Furthermore, …

Dependence Of Photoelectrochemical Properties On Geometry Factors Of Interconnected “Caterpillar-Like” Zno Networks, Qiang Li, Xing Sun, Karen Lozano, Yuanbing Mao

Mechanical Engineering Faculty Publications and Presentations

Highlights

• Hierarchical “caterpillar-like” ZnO nanostructures have been prepared through a hybrid route.

• The ease and high throughput of the method favors a feasible PEC applications.

• The tunability of the geometric factors could optimize the light-material interaction.

• Ultralong and ultrathin branches shorten minority carrier diffusion lengths to further improve PEC performance.

Abstract

To elevate the spatial occupancy of one-dimensional ZnO nanostructures and overcome the limitations of multistep seeding methods currently widely used, a rational, facile and high-yielding procedure has been reported by our group previously for the fabrication of the interconnected three-dimensional “caterpillar-like” ZnO nanostructured networks (CZNs) for photoelectrochemical applications. In …

The Challenge Of Regulatory Excellence, Cary Coglianese

All Faculty Scholarship

Regulation is a high-stakes enterprise marked by tremendous challenges and relentless public pressure. Regulators are expected to protect the public from harms associated with economic activity and technological change without unduly impeding economic growth or efficiency. Regulators today also face new demands, such as adapting to rapidly changing and complex financial instruments, the emergence of the sharing economy, and the potential hazards of synthetic biology and other innovations. Faced with these challenges, regulators need a lodestar for what constitutes high-quality regulation and guidance on how to improve their organizations’ performance. In the book Achieving Regulatory Excellence, leading regulatory experts …

The Effect Of A Powered Ankle Foot Orthosis On Walking In A Stroke Subject: A Case Study, Ali Pourghasem, Ismail Ebrahimi Takamjani, Mohammad Taghi Karimi, Mohammad Kamali, Mohammad Jannesari, Iman Salafian

Department of Mechanical and Materials Engineering: Faculty Publications

[Purpose] Standing and walking are impaired in stroke patients. Therefore, assisted devices are required to restore their walking abilities. The ankle foot orthosis with an external powered source is a new type of orthosis. The aim of this study was to evaluate the performance of a powered ankle foot orthosis compared with unpowered orthoses in a stroke patient.

[Subjects and Methods] A single stroke subject participated in this study. The subject was fitted with three types of ankle foot orthosis (powered, posterior leg spring, and carbon ankle foot orthoses). He was asked to walk with and without the three types …

Finite Element Simulation And Additive Manufacturing Of Stiffness-Matched Niti Fixation Hardware For Mandibular Reconstruction Surgery, Ahmadreza Jahadakbar, Narges Shayesteh Moghaddam, Amirhesam Amerinatanzi, David Dean, Haluk E. Karaca, Mohammad Elahinia

Mechanical Engineering Faculty Publications

Process parameters and post-processing heat treatment techniques have been developed to produce both shape memory and superelastic NiTi using Additive Manufacturing. By introducing engineered porosity, the stiffness of NiTi can be tuned to the level closely matching cortical bone. Using additively manufactured porous superelastic NiTi, we have proposed the use of patient-specific, stiffness-matched fixation hardware, for mandible skeletal reconstructive surgery. Currently, Ti-6Al-4V is the most commonly used material for skeletal fixation devices. Although this material offers more than sufficient strength for immobilization during the bone healing process, the high stiffness of Ti-6Al-4V implants can cause stress shielding. In this paper, …

Water Pump / Purification System: Industrial Mechanic Millwright Competition Project, Ryan Bullong, Keerin Moodly, Daniyal Azam, Chia-Wei Huang

5 Stage Reverse Osmosis Pedal Powered Water Pump Purification System

This report provides the details of an engineering design project undertaken by Mechanical Engineering Design and Drafting Technology students at the Sheridan College. The goal of this project is to design a water pump / purification system driven by the pedal power for the Worldskills 2017 IMM Competition. The design must be portable, easy to assemble and lightweight. A recumbent bicycle was designed at 60° due to its efficiency compared with traditional bicycle. An transmission system which included a gear box, couplings, shafts and pedals was designed in order to have output of 80rpm. The ratio of the gear box …

The Mars Desert Research Station - Erau Crew 160 Expedition, Lycourgos Manolopoulos, Ashley Hollis-Bussey, Hiroki Sugimoto, Cassandra Vella, John Herman, Marc Carofano

Student Works

The Mars Desert Research Station (MDRS) is a research program which is owned and operated by the Mars Society. The MDRS is located in Hanksville, Utah which hosts simulations that are typically two weeks long for professional scientists and engineers as well as college students of all levels, in training for human operations specifically on Mars. This space analog facility is in isolation, allowing for rigorous field studies regarding research that represents a true mission as if the crew members are conducting a real expedition on Mars. Participants are assigned specific roles and tasks that are typically aligned with their …

Intersectionality Of Non-Normative Identities In The Cultures Of Engineering Survey, Allison Godwin, Adam Kirn, Lisa Benson, Geoff Potvin

School of Engineering Education Working Papers

This is a survey measuring students' attitudes and beliefs in engineering. The survey was distributed at four institutions across the U.S. in the fall semester of 2015. Students in first semester first-year engineering courses were surveyed on a paper-and-pencil instrument as part of a larger study. We collected 2,916 valid student responses that were digitized by the research group and audited for accuracy. Validity evidence for this survey has been document in ASEE conference proceedings.

An Evaluation Of The Safety Of The Cycling In Dublin City For Dit Students, Niamh O' Reilly

Articles

Cycling as a mode of transport offers many benefits including a cheap, cost effective, healthy, fast, mainly congestion free and environmentally friendly means of getting to and from places of employment and education. Given the central location of Technological University Dublin campus buildings this would seem an ideal option for its third level students, but on the contrary, a DIT online travel survey conducted in March 2014 found that only 7% of students chose cycling as their primary mode of transport. Concerns about cyclist safety were a major factor cited by students who chose alternative modes of transport. Based on …

Stability And Redispersion Of Platinum Nanoparticle Suspensions For Attachment To Dyes In Low-Cost Solar Cells, Jeffrey Rothstein

Honors Scholar Theses

The project involves optimizing the synthesis, washing, and redispersion of platinum nanoparticles. The nanoparticles are to be attached to dye molecules where they will act as nanocatalysts to reduce energy losses in low-cost dye-sensitized solar cells. The goal is to develop a process based on a pure or mixed solvent that will maintain a stable dispersion of the nanoparticles without interfering with their ability to bond with the dye molecules in the solar cell.

Geostationary Operational Environmental Satellite- R Series (Goes-R) 2016, Paige N. Dixon

Student Works

This is a report on the first NOAA GOES-R satellite, launched on November 19th, 2016. This report will cover some of the details of the GOES-R project, as well as discuss the collaborations that made the project possible. This document will also detail some of the new satellite’s capabilities including geostationary lightning detection, and space weather monitoring, and will focus on real-world application of such technology. Additionally, this report will list some of the current and projected GOES-R products, and the potential benefits if testing proves successful.

Distributed All-Ip Mobility Management Architecture Supported By The Ndn Overlay, Zhiwei Yan, Guanggang Geng, Sherali Zeadally, Yong-Jin Park

Information Science Faculty Publications

Two of the most promising candidate solutions for realizing the next-generation all-IP mobile networks are Mobile IPv6 (MIPv6), which is the host-based and global mobility supporting protocol, and Proxy MIPv6 (PMIPv6), which is the network-based and localized mobility supporting protocol. However, the unprecedented growth of mobile Internet traffic has resulted in the development of distributed mobility management (DMM) architecture by the Internet engineering task force DMM working group. The extension of the basic MIPv6 and PMIPv6 to support their distributed and scalable deployment in the future is one of the major goals of the DMM working group. We propose an …

Nuclear Insurance Subsidies Cost From Post-Fukushima Accounting Based On Media Sources, John Laureto, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Quantification of nuclear liability insurance is difficult without arbitrary liability caps; however, post-mortem calculations can be used to calculate insurance costs. This study analyzes the Fukushima (Daiichi) nuclear power plant disaster to quantify the cost per unit electricity ($/kWh) of nuclear energy from the lifetime of the plant after accounting for the true cost of the liability needed to cover the damages from the nuclear disaster determined from news reports. These costs are then compared to the cost of electricity currently paid by Japanese consumers, and then are aggregated to determine the indirect subsidy for nuclear power providers in both …

Computational Modelling For Phase Transformation Prediction In Super-Invar Alloys: Analytical And Experimental Data, Alexander S. Zhilin, Valeria R. Ramazanova, Joseph William Newkirk, Tarak A. Amine, Deborah Alvarenga

Materials Science and Engineering Faculty Research & Creative Works

The possibility of using computational modelling to predict phase transformation processes has been shown while examining super-invar samples. Due to the complicity of phase transformation processes in these alloys the correlation between modelling and experimental work has been described. Modelling allows basic background of composition behavior to be predicted but it doesn`t give the real structure components.

Adaptive Environments For Enabling Senior Citizens: An Holistic Assessment Tool For Housing Design And Iot-Based Technologies, Matteo Zallio, Damon Berry, Niccolò Casiddu

Conference papers

The population of older adults will continuously increase over the coming decades. As they get older, people will require assistance and regular monitoring, with higher costs for welfare system and families. Two vital aspects of a healthy lifestyle, are domestic autonomy and maintenance of relationships within the neighborhood. This leads to an interesting research issue: “Could houses and appliances have the potential to improve autonomy and quality of life of citizens? Which methods and tools could enhance wellbeing and healthy conditions? The house has the potential to be a safe, adaptive environment, integrated with technologies for life support. This work …

Multimodal Imaging Of Photoreceptor Structure In Choroideremia, Lynn W. Sun, Ryan D. Johnson, Vesper Williams, Phyllis Summerfelt, Alfredo Dubra, David V. Weinberg, Kimberly E. Stepien, Gerald A. Fishman, Joseph Carroll

Biomedical Engineering Faculty Research and Publications

Purpose

Choroideremia is a progressive X-linked recessive dystrophy, characterized by degeneration of the retinal pigment epithelium (RPE), choroid, choriocapillaris, and photoreceptors. We examined photoreceptor structure in a series of subjects with choroideremia with particular attention to areas bordering atrophic lesions.

Methods

Twelve males with clinically-diagnosed choroideremia and confirmed hemizygous mutations in the CHM gene were examined. High-resolution images of the retina were obtained using spectral domain optical coherence tomography (SD-OCT) and both confocal and non-confocal split-detector adaptive optics scanning light ophthalmoscope (AOSLO) techniques.

Results

Eleven CHM gene mutations (3 novel) were identified; three subjects had the same mutation and one …