Digital Commons Network^™

High-Resolution, Real-Time Three-Dimensional Shape Measurement, Song Zhang, Peisen S. Huang

Song Zhang

We describe a high-resolution, real-time 3-D shape measurement system based on a digital fringe projection and phase-shifting technique. It utilizes a single-chip digital light processing projector to project computer-generated fringe patterns onto the object, and a high-speed CCD camera synchronized with the projector to acquire the fringe images at a frame rate of 120frames∕s. A color CCD camera is also used to capture images for texture mapping. Based on a three-step phase-shifting technique, each frame of the 3-D shape is reconstructed using three consecutive fringe images. Therefore the 3-D data acquisition speed of the system is 40frames∕s. With this system, …

Effect Of Chain Architecture And Surface Energies On The Ordering Behavior Of Lamellar And Cylinder Forming Block Copolymers, V. Khanna, Eric W. Cochran, A. Hexemer, G. E. Stein, G. H. Fredrickson, E. J. Kramer, X. Li, J. Wang, S. F. Hahn

Eric W. Cochran

We investigate the effect of surface energy and chain architecture on the orientation of microdomains in relatively thick films (600-800 nm) of lamellar and cylindrical block copolymers of poly(cyclohexylethylene) (C) and poly(ethylene) (E). The E block has 26 ethyl branches per 1000 backbone carbon atoms. Melt surface energies of the C and E blocks are 22.3 and 20.9 mJ/m 2, respectively. Grazing-incidence small-angle X-ray scattering (GISAXS), scanning force microscopy (SFM), and cross-sectional transmission electron microscopy (TEM) show that cylindrical and lamellar CEC triblock copolymers orient their microdomains normal to the surface throughout the film thickness. However, a lamellar CE diblock …

A Framework For New Generation Transportation Simulation, Daiheng Ni

Daiheng Ni

This paper discussed the evolution and future trend of simulation in general domain and in transportation. Some challenges facing transportation modeling and simulation were identified. As an effort to address these challenges, a framework of new generation transportation simulation was developed. The framework is envisioned to be multi- scale in resolution, parallel in execution, and driven by ob- jects. The paper further discussed strategies of transporta- tion simulation at a nanoscopic level which offers a level of modeling detail beyond the state-of-the-art.

Safety Impacts Of “Road Diets” In Iowa, Thomas B. Stout, Michael D. Pawlovich, Reginald R. Souleyrette, Alicia Carriquiry

Reginald R. Souleyrette

Road diets are frequently suggested solutions to problems of left-turn related crashes. This feature analyzes the impact of the conversion of 15 sites using a Full Bayes Approach as well as a classical before-and-after study (with yoked comparison sites). The study found a reduction in the crash rate, crash density, injury crashes, the involvement rate for drivers older than 65 and left-turn related crashes.

A Generalized Neuron Based Adaptive Power System Stabilizer For Multimachine Environment, D. K. Chaturvedi, O. P. Malik

D. K. Chaturvedi Dr.

Artificial neural networks trained as intelligent controllers can easily accommodate the non-linearities and time dependencies of non-linear, dynamic systems. However, they require large training time and large number of neurons to deal with complex problems. Taking benefit of the characteristics of a generalized neuron (GN), that requires much smaller training data and shorter training time, a generalized neuron based adaptive power system stabilizer (GNAPSS) is proposed. It consists of a GN as an predictor, that predicts the plant dynamics, and a GN as a controller to damp low frequency oscillations. Results show that the proposed GNAPSS can provide a consistently …

Towards A New Taxation System For Motor Vehicles, Theodoros Zachariadis

Theodoros Zachariadis

No abstract provided.

Posterminaries: After Nabarro, Alexander H. King

Alexander H. King

With the passing of Frank Nabarro in July of this year, we have lost one of the founding fathers of materials science. His name appears in many of the textbooks from which we train our students today, and also on the spines of several volumes on dislocation theory, including his classic monograph on the subject. He rightly stands among the gods of our field. Ninety years old at his death, he was a sprightly dancer at the frontiers of knowledge, right up to the end.

Santa Clara County Soft First Story Multi Unit Building Survey, Guna S. Selvaduray, S. Vukazich, J. Tran

Guna S. Selvaduray

The objective of this survey was to provide data to emergency managers in Santa Clara County on the number of soft first-story multifamily dwellings (MFD) located in their communities using a cost-effective town-gown partnership. Target areas of cities were found by identifying areas containing residential units of two or more stories that had four or more living units. The survey found that 2,630, or 36%, of the 7,391 MFD in Santa Clara County are of the soft first-story construction type. It was found that one out of every nine apartment units in Santa Clara County is located in a soft …

The Importance Of Emerging Biobased Industries To Engineering And Technology, Kurt A. Rosentrater, R. Balamuralikrishma

Kurt A. Rosentrater

Our society has developed an insatiable demand for energy and material goods. Historically, these needs have been met primarily by fossil fuels and other non-renewable raw materials. As environmental concerns grow, however, renewable resources are gaining increased attention. This paper examines the emergence and importance that biobased industries are increasingly beginning to play. A biobased enterprise, similar in concept to a traditional refinery or factory, utilizes conversion technologies to produce various products. These operations are rapidly increasing both in number as well as in capacity throughout this country, and are poised to add significantly to the nation’s energy and material …

Analytical And Experimental Studies Of Properties Of Ethanol Coproduct-Filled Plastics, Robert Tatara, Andrew Otieno, Srikrishna Suraparaju, Kurt A. Rosentrater

Kurt A. Rosentrater

As the renewable fuels industry continues to grow, the quantity of resulting byproducts has expanded in tandem. Currently, these materials are primarily used for animal feed, but at some point will saturate the animal feeds market. Thus, it is necessary to investigate alternative methods and applications by which these coproducts can be utilized. One potential application for these process residues involves plastics manufacturing. Due, in part, to the increasing cost of resins and conventional fillers, alternate fillers have been increasingly sought. Many of these include biological materials such as grasses, bamboo, starch, chicken feathers, soy protein, and cellulose. Not only …

Mass Customization And Its Curricular Implications For Four-Year Degree Programs In Manufacturing Technologies, R. Balamuralikrishma, Kurt A. Rosentrater, Mark Rajai

Kurt A. Rosentrater

Mass customization is fast emerging as a popular business strategy which aims to also cater to individual expressed needs of end users at prices closely comparable to mass produced items. Companies are able to switch to this mode of operation by primarily making their own operations demand-driven, flexible systems and asking their suppliers to do the same. Customers by and large are delighted to be part of this new kind of supply chain and are willing to invest time to specify what exactly they want provided businesses are willing to keep their end of the bargain in terms of high …

Stabilization/Solidification Of Lead-Contaminated Soil Using Cement And Rice Husk Ash, Hilmi Mahmud

Hilmi Mahmud

This paper presents the findings of a study on solidification/stabilization (S/S) of lead-contaminated soil using ordinary Portland cement (OPC) and rice husk ash (RHA). The effects of varying lead concentrations (in the form of nitrates) in soil samples on the physical properties of their stabilized forms, namely unconfined compressive strength (UCS), setting times of early mixtures and changes in crystalline phases as well as chemical properties such as leachability of lead, pH and alkalinity of leachates are studied. Results have indicated that usage of OPC with RHA as an overall binder system for S/S of lead-contaminated soils is more favorable …

Modification Of Multi-Walled Carbon Nanotubes By Microwave Digestion Method As Electrocatalyst Supports For Direct Methanol Fuel Cell Applications, Fang-Tzu Chuang

Fang-Tzu Chuang

Multi-walled carbon nanotubes (MWCNTs) which were directly synthesized on carbon cloth were modified by a microwave digestion method in 5M HNO3 for supporting Pt nanoparticles. The characterizations of modified CNTs were carried out by TEM, XPS, FTIR and Raman spectroscopy. The HRTEM image shows the caps of MWCNTs are opened after modifying by microwave digestion method. The open-end and undamaged MWCNTs can provide a larger surface area for supporting more catalysts. Furthermore, the methanol electrocatalytic oxidation of microwave digestion treated Pt/MWCNTs electrode shows higher current density than pristine and nitric acid-treated MWCNTs from cyclic voltammograms. This can be an effective …

Analiza Możliwości Ograniczenia Emisji Zanieczyszczeń Powietrza Z Instalacji Spalania Odpadów Medycznych W Tarnowie, Robert Oleniacz

Robert Oleniacz

The paper presents initial research of effects of some factors on the amount of gaseous pollutants formation during medical waste incineration in a two-stage starved air fluidised bed reactor. In the research was included the impact of such factors as oxygen contents in flue gases, frequency of waste loading, momentary mass flow of waste and temperature in the secondary combustion chambers. Measurements showed that the waste incineration in large amount periodically caused excessive emissions incomplete combustion products (CO, HC), especially during wrong operation of the combustion system. The work demonstrated that the essential importance for CO and HC formation reducing …

Anaerobic Catalytic Oxidation Of Hydrocarbons In Moving Heat Waves. Case Simulation: Propane Oxidative Dehydrogenation In A Packed Adiabatic V-Ti Oxide Catalyst Bed, Andrey N. Zagoruiko

Andrey N Zagoruiko

The model simulation study has shown that the anaerobic process of oxidative dehydrogenation of propane under periodic alteration of feeding between propane and air may be realized in adiabatic catalyst beds in stable continuous cyclic mode in two-reactor scheme. In case of appropriate choice of process parameters (cycle duration, feeding flow rates) the process appears to be autothermal, i.e. it does not require any inlet gas preheating for stable operation. Compared to similar steady-state adiabatic process, the proposed process is characterized with much lower maximum catalyst temperatures, giving the way to process pure propane without diluting it with inert gases, …

Choice Of Input Data Type Of Artificial Neural Network To Detect Faults In Alternative Current Systems, Tarak Benslimane, Boukhemis Chetate

Boukhemis Chetate

No abstract provided.

Phase Field Theory Of Surface- And Size-Induced Microstructures, Valery I. Levitas, D.W. Lee, D. L. Preston

Valery I. Levitas

New surface- and size-induced microstructures are found as analytic solutions to a phase field theory of first-order phase transformations. A recently developed exact stability criterion, based on most destabilizing fluctuations, is used to analyze the stability and physical interpretation of each microstructure. Conditions for barrierless surface nucleation, i.e. relationship between surface energy, driving force for the transformation and sample size, are found. If they are met, some of these microstructures are destroyed resulting in the barrierless transformation to alternative phases.

Semicrystalline Thermoplastic Elastomeric Polyolefins: Advances Through Catalyst Development And Macromolecular Design, Atsushi Hotta, Eric W. Cochran, Janne Ruokolainen, Vikram Khann, Glenn H. Fredrickson, Edward J. Kramer, Yong-Woo Shin, Fumihiko Shimizu, Anna E. Cherian, Phillip D. Hustad, Jeffrey M. Rose, Geoffrey W. Coates

Eric W. Cochran

We report the design, synthesis, morphology, phase behavior, and mechanical properties of semicrystalline, polyolefin-based block copolymers. By using living, stereoselective insertion polymerization catalysts, syndiotactic polypropylene-block-poly(ethylene-co-propylene)-block-syndiotactic polypropylene and isotactic poly propylene-block-regioirregular poly propylene-block- isotactic polypropylene triblock copolymers were synthesized. The volume fraction and composition of the blocks, as well as the overall size of the macromolecules, were controlled by sequential synthesis of each block of the polymers. These triblock copolymers, with semicrystalline end-blocks and mid-segments with low glass-transition temperatures, show significant potential as thermoplastic elastomers. They have low Young's moduli, large strains at break, and better than 90% elastic recovery at …

Hydrogen And Deuterium Exchange On Pt(111) And Its Poisoning By Carbon Monoxide Studied By Surface Sensitive High-Pressure Techniques, Max Montano, Kaitlin M. Bratlie, Miquel Salmeron, Gabor A. Somorjai

Kaitlin M. Bratlie

Catalytic hydrogen/deuterium exchange on a platinum (111) single crystal and its poisoning with carbon monoxide was studied using scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), sum frequency generation vibrational spectroscopy (SFG), and mass spectrometry under reaction conditions at pressures in the mTorr to atmospheric range. At 298 K and in the presence of 200 mTorr of hydrogen and 20 mTorr of deuterium the surface is catalytically active, producing HD with activation energy of 5.3 kcal/mol. Addition of 5 mTorr of CO stops the reaction completely. In situ STM images reveal an ordered surface structure of chemisorbed CO. At 353 …

Sum Frequency Generation Vibrational Spectroscopic And High-Pressure Scanning Tunneling Microscopic Studies Of Benzene Hydrogenation On Pt(111), Kaitlin M. Bratlie, Max O. Montano, Lucio D. Flores, Matti Paajanen, Gabor A. Somorjai

Kaitlin M. Bratlie

Sum frequency generation (SFG) vibrational spectroscopy and high-pressure scanning tunneling microscopy (HP-STM) have been used in combination for the first time to study a catalytic reaction. These techniques have been able to identify surface intermediates in situ during benzene hydrogenation on a Pt(111) single-crystal surface at Torr pressures.

Considerations For Manufacturing Bio-Based Plastic Products, Kurt A. Rosentrater, Andrew W. Otieno

Kurt A. Rosentrater

One engine that drives the United States’ economic growth is an ever-increasing demand for manufactured products, both at home and abroad. This increase has created a major concern for the environment in terms of disposing used goods and ensuring that these products are safe. As environmental concerns grow, however, renewable resources are gaining increasing attention, especially as industrial ecology and product biodegradability gain importance. Added to this, biological materials are increasingly being utilized to replace traditional materials in manufacturing. To aid both educators as well as researchers, this paper examines several considerations that are essential for manufacturing plastic products that …

Effect Of Disorder On The Thermal Transport And Elastic Properties In Thermoelectric Zn4Sb3, S. Bhattacharya, R.P. Hermann, Veerle Keppens, T. M. Tritt, G. J. Snyder

Veerle Keppens

Zn4Sb3 undergoes a phase transition from α to β phase at T1≈250 K. The high temperature β-Zn4Sb3 phase has been widely investigated as a potential state-of-the-art thermoelectric (TE) material, due to its remarkably low thermal conductivity. We have performed electronic and thermal transport measurements exploring the structural phase transition at 250 K. The α to β phase transition manifests itself by anomalies in the resistivity, thermopower, and specific heat at 250 K as well as by a reduction in the thermal conductivity as Zn4Sb3 changes phase from the ordered α to the disordered β-phase. Moreover, measurements of the elastic constants …

Macromolecules , Yu Zhu

Yu Zhu

No abstract provided.

Approches Orientées Services Web De L'Ihm De Supervision : Nouvelles Solutions Technologiques Pour Les Ingénieurs Et Nouvelles Problématiques Pour Les Ergonomes ?, Djilali Idoughi, Christophe Kolski

Professor Djilali IDOUGHI

RESUME Dans cet article, nous considérons l’IHM de supervision dans un contexte technologique nouveau et en constante évolution, lequel est caractérisé par des aspects impor-tants comme la mobilité et la coopération entre acteurs d’une part, et l’inter connectivité, l’interopérabilité et l’hétérogénéité des systèmes industriels utilisés d’autre part. De nouvelles solutions technologiques « attrayan-tes » pour les ingénieurs devraient conduire à de nouvel-les problématiques pour les ergonomes.

Emisja Zanieczyszczeń Powietrza Z Procesu Grafityzacji Wyrobów Drobnych, Marian Mazur, Robert Oleniacz, Marek Bogacki, Przemysław Szczygłowski

Robert Oleniacz

The paper presents the research results of the air pollutant emissions from the graphitising process of fine carbon products in the Acheson furnace (discharge capacity 5,5 Mg). Research was performed for two kinds of raw material inputs (based on petroleum coke and pitch coke). Approximately 40-hours measurement series were carried out for each material including mainly such substances like carbon monoxide, hydrocarbons, nitrogen oxides, sulphur dioxide, hydrogen sulphide, carbon disulphide, ammonia, benzene, toluene, xylenes, total dust, tar substances and polycyclic aromatic hydrocarbons. Both average and maximum concentrations and mass streams in the flue gases and average emission factors were presented …

Tribo-Surface Characteristics Of Al-B4c And Al-Sic Composites Worn Under Different Contact Pressures

A.S. Md Abdul Haseeb

Tribo-surface characteristics of two aluminium metal matrix composites (Al-MMC) of compositions Al-13 vol%B4C and Al-13 vol%SiC sliding against a commercial phenolic brake pad have been investigated under dry conditions. The wear tests were carried out using a pin-on-disc type apparatus at a linear speed of 1.62 m s-1 under contact pressures ranging from 0.75 to 3.00 MPa. The coefficient of friction was recorded on line. Wear rates were calculated from mass loss measurements. Scanning electron microscope equipped with energy dispersive X-ray spectroscopy was used to examine the tribo-surface. It is found that wear rate of both composites increases with increasing …

Modeling Of Three-Phase Uniform Symmetrical Sampling Digital Pwm For Power Converter, Saad Mekhilef

Saad Mekhilef

A mathematical approach of modeling and analyzing three-phase pulsewidth modulation (PWM) is presented. The three-phase flyback converter required a unique pattern of PWM to optimize the power transfer in the magnetic circuit used in the converter. The three-phase PWM is generated digitally based on uniform symmetrical sampling technique using Xilinx chip. The generated PWM pattern is able to reduce the magnitude of the low order of harmonic components present in the input ac supply. Although software simulation could simulate the PWM pattern, it does not represent the exact pattern as being generated digitally. The mathematical approach used is to model …

Comment On “Structural Stability Of Complex Hydrides: Libh4 Revisited”, Duane D. Johnson, Nikolai A. Zarkevich

Duane D. Johnson

A Comment on the Letter by Zbigniew Łodziana and Tejs Vegge, Phys. Rev. Lett. 93, 145501 (2004).

A Longitudinal Evaluation Of Electromagnetic Theory Students’ Continuous Improvement In Learning Skills, Rozeha A Rashid, Mazlina Esa, Mohd Saidfudin Masodi, Razimah Abdullah

Razimah Abdullah

Artificial Neural Network Modeling Technique For Voltage Stability Assessment Of Radial Distribution Systems, Mohamed M. Hamada Dr., Mohamed A. A. Wahab Prof. Dr., Nasser G. A. Hemdan Dr. Ing.

Dr.-Ing. Nasser Hemdan

This paper presents an artificial neural network (ANN) based modeling technique for predicting the voltage stability of radial distribution systems. The modeling technique is based on a new voltage stability index for assessment of radial distribution systems Lv . The index is implemented to investigate a 33-bus distribution system. An ANN model which has an input layer with two input vectors (P, Q), one hidden layer, and an output layer, which gives the predicted value for the voltage stability index Lv is suggested to predict the value of this index. The performance of the ANN model is tested by using …