Other Physics Commons^™

Tribochemical Studies Of Hard Carbon Films As A Function Of Load And Environment, Andrew R. Konicek

Publicly Accessible Penn Dissertations

Hydrogen-free, hard carbon thin films are exciting material coatings candidates as solid lubricants. Two examples, ultrananocrystalline diamond (UNCD) and tetrahedral amorphous carbon (ta-C), are particularly promising, because their exceptional mechanical and tribological properties are combined with extremely smooth surfaces. However, their tribological performance can be seriously affected by variations in humidity. These materials do not perform well in vacuum or inert environments. The mechanisms controlling the friction and wear of UNCD and ta-C are not well understood because of a fundamental lack of physical understanding of the surface interactions.

The aim of this thesis is to elucidate the fundamental mechanisms …

An Implantable Mosfet Dosimeter Modified To Act As A Fiducial Marker, Joseph S. Dick

Dissertations and Theses (Open Access)

In external beam radiation therapy, it is imperative that the prescribed dose is administered to the correct location and in the correct amount. Though several ex vivo methods of quality assurance are currently employed to achieve this goal, verifying that the correct dose is received within the patient in situ is impossible without the capability of measuring dose inside the patient. Recently, a method of measuring dose delivered within the patient has been developed, an implantable MOSFET dosimeter. This dosimeter is implanted within the patient and records the dose received. Since the dosimeter is implanted in the patient, it could …

Dynamic Chemical Shift Imaging For Image-Guided Thermal Therapy, Brian A. Taylor

Dissertations and Theses (Open Access)

Magnetic resonance temperature imaging (MRTI) is recognized as a noninvasive means to provide temperature imaging for guidance in thermal therapies. The most common method of estimating temperature changes in the body using MR is by measuring the water proton resonant frequency (PRF) shift. Calculation of the complex phase difference (CPD) is the method of choice for measuring the PRF indirectly since it facilitates temperature mapping with high spatiotemporal resolution. Chemical shift imaging (CSI) techniques can provide the PRF directly with high sensitivity to temperature changes while minimizing artifacts commonly seen in CPD techniques. However, CSI techniques are currently limited by …

Benchmarking And Implementation Of A New Independent Monte Carlo Dose Calculation Quality Assurance Audit Tool For Clinical Trials, Scott E. Davidson

Dissertations and Theses (Open Access)

Introduction Commercial treatment planning systems employ a variety of dose calculation algorithms to plan and predict the dose distributions a patient receives during external beam radiation therapy. Traditionally, the Radiological Physics Center has relied on measurements to assure that institutions participating in the National Cancer Institute sponsored clinical trials administer radiation in doses that are clinically comparable to those of other participating institutions. To complement the effort of the RPC, an independent dose calculation tool needs to be developed that will enable a generic method to determine patient dose distributions in three dimensions and to perform retrospective analysis of radiation …

Thoracic Target Volume Delineation Using Various Maximum-Intensity Projection Computed Tomography Image Sets For Stereotactic Body Radiation Therapy, David A. Zamora

Dissertations and Theses (Open Access)

The motion of lung tumors during respiration makes the accurate delivery of radiation therapy to the thorax difficult because it increases the uncertainty of target position. The adoption of four-dimensional computed tomography (4D-CT) has allowed us to determine how a tumor moves with respiration for each individual patient. Using information acquired during a 4D-CT scan, we can define the target, visualize motion, and calculate dose during the planning phase of the radiotherapy process. One image data set that can be created from the 4D-CT acquisition is the maximum-intensity projection (MIP). The MIP can be used as a starting point to …

Cryogenic Refrigeration For Quantum Voltage Standards, Jeffrey Power

Physics

Currently the world maintains the voltage standard using a Josephson junction which makes use of the properties of superconductors and quantum tunneling. Current technology requires liquid He to cool the Josephson junctions to ~4 K to allow them to function as superconductors. He (l) is expensive and price is geographically dependent. Here we investigated using a cryocooler, modeled after a Gifford-McMahon Refrigerator, that could run on 120V (or a standard outlet) and used gaseous He as the working fluid –a less geographically dependent and inexpensive alternative to He (l). We found that indeed a standard outlet gaseous He compressor could …

Investigation Of Track-Cluster Matching Vs Track-Cell Matching In The Alice Detector At Cern, Kevin Coulombe

Physics

The ALICE (A Large Ion Collider Experiment) Experiment is a detector that is one of four stationed at the CERN Large Hadron Collider. The goal of ALICE is to investigate the properties of the quark-gluon plasma, a new form of matter which only existed during the first microsecond of the Universe. ALICE measures the aftermath of the collision of two lead ions. Some information detected is the trajectory of the particles traveling through the tracking detectors and energy deposited in the calorimeters. Both the tracks and energy are required to determine the identities of the various particles as they travel …

The Usage Of Smartphones In The Calculation Of Relativistic Time Dilation Effects At Meager Velocities, Leland Gregory

Physics

The theories of special and general relativity postulate that events are not simultaneous for different observers, and that different observer's times tick at different rates depending on relative velocity and the magnitude of the gravitational field they are in. This project seeks to design a program for use with smartphones that will calculate this change in time, in real time, and keep track of the discrepancies in time experienced between the observer and a stationary point on the surface of the earth.

Computing Hydrogen Energetic Neutral Atom (Ena) Losses For Nasa's Ibex Using 3d Models, Eric Zirnstein

Honors Capstone Projects and Theses

No abstract provided.

Thoracic Radiotherapy Treatment Planning With Cine Pet/Ct, Adam C. Riegel

Dissertations and Theses (Open Access)

Purpose: Respiratory motion causes substantial uncertainty in radiotherapy treatment planning. Four-dimensional computed tomography (4D-CT) is a useful tool to image tumor motion during normal respiration. Treatment margins can be reduced by targeting the motion path of the tumor. The expense and complexity of 4D-CT, however, may be cost-prohibitive at some facilities. We developed an image processing technique to produce images from cine CT that contain significant motion information without 4D-CT. The purpose of this work was to compare cine CT and 4D-CT for the purposes of target delineation and dose calculation, and to explore the role of PET in target …

Commissioning An Anthropomorphic Spine And Lung Phantom For Remote Dose Verification Of Institutions Participating In Rtog 0631, Douglas F. Caruthers

Dissertations and Theses (Open Access)

The RPC developed a new phantom to ensure comparable and consistent radiation administration in spinal radiosurgery clinical trials. This study assessed the phantom’s dosimetric and anatomic utility. The ‘spine phantom’ is a water filled thorax with anatomy encountered in spinal radiosurgery: target volume, vertebral column, spinal canal, esophagus, heart, and lungs. The dose to the target volume was measured with axial and sagittal planes of radiochromic film and thermoluminescent dosimeters (TLD). The dose distributions were measured with the radiochromic film calibrated to the absolute dose measured by the TLD. Four irradiations were administered: a four angle box plan, a seven …

An Analysis Of The Quasi Biennial Oscillation, Ozone And Thermal Damping, Kevin Jauregui

Physics

No abstract provided.

Construction And Enhancement Of Stereo Vacuum Tube Amplifier With Precision Machined Enclosure, Nikolaus (Nik) Glazar

Physics

The purpose of this project was to build a high fidelity tube amplifier from a kit, and machine a beautiful enclosure to house the electronics. Improvements were made to the circuit, and the amplifier was then tested for audio performance.

Range Adaptive Proton Therapy For Prostate Cancer, Adam D. Melancon

Dissertations and Theses (Open Access)

Purpose: The rapid distal falloff of a proton beam allows for sparing of normal tissues distal to the target. However proton beams that aim directly towards critical structures are avoided due to concerns of range uncertainties, such as CT number conversion and anatomy variations. We propose to eliminate range uncertainty and enable prostate treatment with a single anterior beam by detecting the proton’s range at the prostate-rectal interface and adaptively adjusting the range in vivo and in real-time.

Materials and Methods: A prototype device, consisting of an endorectal liquid scintillation detector and dual-inverted Lucite wedges for range compensation, was designed …

Upgrade To The Pierre Auger Cosmic Ray Observatory's Lidar System, Emily B. Petermann

Theses, Dissertations, and Student Research: Department of Physics and Astronomy

The Pierre Auger Cosmic Ray Observatory currently operates four elastic lidar systems in order to characterize the atmospheric aerosol content above the observatory. The atmospheric information gained by the lidar system is then used in the calibration of the observatory’s four fluorescence detectors. Currently the four lidars in operation are unable to accurately determine the aerosol content below a distance of 1 km. A project is currently underway to upgrade the current lidar system by adding an additional detector to each of the existing lidar systems. The considered designs for this upgrade and the initial results from the upgrade prototype …

Analysis Of An All-Optical Sbs Avalanche Detector, D. Walker, M. Steiner, Armen Gulian

Mathematics, Physics, and Computer Science Faculty Articles and Research

Seeding Brillouin scattering with a sufficiently efficient source of coherent phonons has the potential to produce energy-sensitive photon detectors. Based on this idea, we propose and analyze some possible designs for such a detector.

Gamma-Ray Spectroscopy: Meteorite Samples And The Search For 98tc, Kristopher L. Merolla

Physics

The focus of this project is low-count-level gamma-ray spectroscopy on meteorite samples in search of a particular isotope of Technetium (98Tc), which according to stellar theory, should be present in the universe. The spectral lines for 99Tc have, however, been observed in S-, M-, and N- type stars, which makes finding 98Tc created naturally a possibility, and thus a search can be justified.

Relationship Between Photospheric Magnetic Fields And Coronal Activities, Changyi Tan

Dissertations

Coronal emission comes in two forms, a steady component where the corona is heated to million degrees and a much hotter transient component of solar flares. Both components are known to be related to the evolution of surface magnetic fields. This dissertation studies the evolution of photospheric magnetic fields and flow fields and their relation to the properties of these two coronal emission components.

The key issue in the study of the steady coronal emission is the coronal heating problem: how the corona is heated to millions of degrees while the underlying solar photosphere is only a few thousand degrees. …

Integration Of Electronic And Optical Techniques In The Design And Fabrication Of Pressure Sensors, Ivan Padron

Dissertations

Since the introduction of micro-electro-mechanical systems fabrication methods, piezoresistive pressure sensors have become the more popular pressure transducers. They dominate pressure sensor commercialization due to their high performance, stability and repeatability. However, increasing demand for harsh environment sensing devices has made sensors based on Fabry-Perot interferometry the more promising optical pressure sensors due to their high degree of sensitivity, small size, high temperature performance, versatility, and improved immunity to environmental noise and interference. The work presented in this dissertation comprises the design, fabrication, and testing of sensors that fuse these two pressure sensing technologies into one integrated unit. A key …

Grafika Inżynierska Ćw., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.