Synergetic Effect Of Viscosity Modifying Admixtures And Polycarboxylate Ether Superplasticizer On Key Characteristics Of Thixotropic Uhpc For Bonded Bridge Deck Overlay Rehabilitation, 2024 Missouri University of Science and Technology
Synergetic Effect Of Viscosity Modifying Admixtures And Polycarboxylate Ether Superplasticizer On Key Characteristics Of Thixotropic Uhpc For Bonded Bridge Deck Overlay Rehabilitation, Le Teng, Ming Jin, Jiadi Du, Kamal H. Khayat
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Thin bonded ultra-high-performance concrete (UHPC) overlay is an advanced technology for bridge deck rehabilitation. UHPC should be tailored to secure adequate flowability and high thixotropy to facilitate mixing and placement with a low risk of sagging of the material on sloped bridge deck surfaces. The synergetic effect between nano clay (NC) and polycarboxylate ether (PCE) superplasticizer or cellulose-based viscosity modifying admixture (VMA) and PCE on the rheological properties (yield stress, plastic viscosity, and thixotropy), cement hydration, autogenous shrinkage, compressive strength, and porosity was systematically investigated. The bond strength between conventional concrete (CC) representing existing bridge deck concrete and thixotropic UHPC …
Laboratory Evaluation And Field Demonstration Of Cold In-Place Recycling Asphalt Mixture In Michigan Low-Volume Road, 2024 Michigan Technological University
Laboratory Evaluation And Field Demonstration Of Cold In-Place Recycling Asphalt Mixture In Michigan Low-Volume Road, Dongzhao Jin, Lei Yin, Lance Malburg, Zhanping You
Michigan Tech Publications, Part 2
Cold-in place recycling (CIR) is a promising technology for the rehabilitation of asphalt pavements. However, the CIR asphalt pavement constructed in the field often has high air voids due to the presence of moisture during construction, and the moisture susceptibility of the pavement is crucial in determining its service life. Therefore, the objective of this research was to assess the laboratory performance of CIR asphalt mixes under freeze-thaw conditions (The mix prior to being subjected to freezing and thawing is labeled as "dry condition", while the mix that was placed in a refrigerator at –18 °C for 16 h and …
Understanding The Impact Of Microplastic Contamination On Soil Quality And Eco-Toxicological Risks In Horticulture: A Comprehensive Review, 2024 Edith Cowan University
Understanding The Impact Of Microplastic Contamination On Soil Quality And Eco-Toxicological Risks In Horticulture: A Comprehensive Review, N. P. Gayathri, Geena Prasad, Vaishna Prabhakaran, Vishnu Priya
Research outputs 2022 to 2026
The horticulture sector, essential for global food production, confronts significant challenges with prevalent pollutants, mainly microplastics. The presence of microplastics in the food chain has induced physiological stress and a multifactorial food safety concern. The complexity of the problem, arising from intricate interactions among microplastics, organisms, and ecosystems, poses a substantial challenge to food safety, necessitating an immediate strategic perspective due to the associated risks to human health and eco-toxicology. Significant knowledge gaps persist regarding their impact on terrestrial ecosystems, especially in horticulture. This study addresses the urgent need to comprehend the implications of microplastics on soil health, eco-toxicological risks, …
Field Flow Measurements For Pipe Installations With Non-Ideal Conditions, 2024 Utah State University
Field Flow Measurements For Pipe Installations With Non-Ideal Conditions, Jake Douglas
All Graduate Theses and Dissertations, Fall 2023 to Present
Accurate flow measurement data is necessary to effectively manage water resources. The purpose of this research is to investigate options to improve field flow measurement by investigating alternatives for calibrating flow meters installed in non-ideal piping. Typically, to accurately measure a flow rate using most types of flow meters, it is recommended that a straight section of pipe be installed immediately upstream and downstream of the flow meter to avoid flow fluctuations at the meter location. However, in many cases, flow disturbances upstream of the meter are unavoidable.
The performance of field flow measurements in non-ideal piping scenarios were studied …
Exploring The Role Of Near Channel Geospatial Attributes To Predict Suspended Sediment Concentration Patterns Across The Conus Region, 2024 Utah State University
Exploring The Role Of Near Channel Geospatial Attributes To Predict Suspended Sediment Concentration Patterns Across The Conus Region, Aaron J. Sigman
All Graduate Theses and Dissertations, Fall 2023 to Present
High concentrations of suspended sediment (SSC) in a river can represent a critical water quality concern, reduce the storage capacity of reservoirs, and impact aquatic habitat. The total amount of sediment is calculated from a combination of river properties, including the amount of available sediment and the flow of water carrying the sediment. Water flow properties can be found using local information about the channel, however understanding the concentration of sediment in the river requires understanding the supply of sediment from the watershed. To understand where sediment is coming from, we examined over 1000 United States Geological Survey sites with …
Physical And Stochiometric Controls On Nutrient Uptake And Ecosystem Respiration In Contrasting Sites, 2024 University of New Mexico
Physical And Stochiometric Controls On Nutrient Uptake And Ecosystem Respiration In Contrasting Sites, Jancoba K. Dorley
Civil Engineering ETDs
Meteorological, hydrological, and biogeochemical processes naturally control stream ecosystems. These processes define the frequency and distribution of precipitation and the supply and demand of solutes and particles to support aquatic food chains through space and time. Studies have also found that stream ecosystems are also controlled by anthropogenic activities, which occur on a much shorter timescale. These anthropogenic activities affect stream ecosystems' structure and function from local to planetary changes to the environment. It is essential for scientists and engineers to understand the relationships between naturally occurring processes and those created by human activities for a better interpretation of stream …
A Review Of Whipple Shield Ballistic Limit Equations, 2024 Missouri University of Science and Technology
A Review Of Whipple Shield Ballistic Limit Equations, S. Ryan, W. (William) P. Schonberg
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Ballistic limit equations (BLEs) are semi-analytical expressions used to predict the risk posed by micrometeoroid and orbital debris (MMOD) impacts on a spacecraft. A foundational BLE, known as the new non-optimum (NNO) equation was published by Eric Christiansen of NASA Johnson Space Center in 1990 for application on Whipple shields – two-plate configurations consisting of a thin sacrificial plate located at some standoff in front of the spacecraft pressure hull or structural wall. Today, BLEs for almost all multi-plate spacecraft structures, e.g., honeycomb sandwich panels, monolithic structures with thermal insulation blankets, etc., are based on the NNO Whipple BLE. We …
Modeling Inflation Transmission Among Different Construction Materials, 2024 Missouri University of Science and Technology
Modeling Inflation Transmission Among Different Construction Materials, Mohamad Abdul Nabi, Islam H. El-Adaway, Rayan H. Assaad
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Cost estimating in the construction industry is challenging due to the high uncertainty associated with the supply chain, especially after the COVID-19 pandemic. Some research studies have addressed such problems by developing models that predict material cost. In fact, all material can be interconnected and interrelated with lead-lag relationships such that any inflation in one material's price can be associated with inflation in other materials' prices, referred to as transmission of inflation. Despite the latter, none of the existing studies have investigated inflation transmission among all construction materials. This paper fills this knowledge gap. The authors used a multistep research …
Tracking Perfluoroalkyl Substances From Wastewater Influent To Its Accumulation In Vegetables And Forage Grass, 2024 Utah State University
Tracking Perfluoroalkyl Substances From Wastewater Influent To Its Accumulation In Vegetables And Forage Grass, Simon Kozik
All Graduate Theses and Dissertations, Fall 2023 to Present
Per and poly-fluorinated alkyl substances (PFAS) are a class of chemicals that are persistent in the environment. PFAS was found in wastewater, which can be used after wastewater treatment for irrigation water, and in the biosolids that can be mixed with soils to provide nutrients and generally improve soil quality. This study found when wastewater was used it increases the level of PFAS in vegetables and forage grass. PFAS concentrations were tracked from the influent of the wastewater treatment plant to the effluent, to the irrigation water, to the soil, and finally into the vegetable and forage grass grown on …
Investigating Causes Of Disputes Resulting In Litigation In Airport Development Projects In The United States Using Graph-Based Techniques, 2024 Missouri University of Science and Technology
Investigating Causes Of Disputes Resulting In Litigation In Airport Development Projects In The United States Using Graph-Based Techniques, Ramy Khalef, Islam H. El-Adaway
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Airports represent a crucial a sector of the US infrastructure, but they were documented to have scored a D+. To mitigate this, governmental authorities have issued initiatives to update the airport infrastructure. With an expected critical junction for a major transformation in the airport sector, it is anticipated that airport projects will increase. This shall result in an escalation in the number of disputes. Previous research analyzed dispute concerns within the construction sector, but none tackled the perspective of airport projects. Accordingly, the goal of this study is to investigate the leading causes of disputes in litigation within US airport …
Four-Way Cfd-Dem Coupling To Simulate Concrete Pipe Flow: Mechanism Of Formation Of Lubrication Layer, 2024 Missouri University of Science and Technology
Four-Way Cfd-Dem Coupling To Simulate Concrete Pipe Flow: Mechanism Of Formation Of Lubrication Layer, Tooran Tavangar, Masoud Hosseinpoor, Jeffrey S. Marshall, Ammar Yahia, Kamal H. Khayat
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
This study introduced a four-way CFD-DEM coupling approach to simulate the shear-induced particle migration (SIPM) mechanism leading to formation of the lubrication layer (LL) during concrete pumping. The CFD-DEM simulations considered the coupled effect of concentration (10 %–40 %) and wide size distribution (1–17 mm) of aggregate and rheology of the mortar for forces between the suspending matrix and the particles (and vice versa), as well as force transmission directly between particles (and the pipe wall). The formation of the LL was successfully simulated through a more realistic understanding the SIPM mechanism and rheological evaluation across the pipe with comparable …
Poster Session: Onu Engineering Freshman And Senior Design Projects, 2024 Olivet Nazarene University
Poster Session: Onu Engineering Freshman And Senior Design Projects, Keith Schimmel
Scholar Week 2016 - present
This poster session is held Friday, April 19, 4:45-6:15pm, with food served, in the Reed Hall of Science Tech Center.
The capstone engineering senior design projects at Olivet Nazarene University involve interdisciplinary engineering teams completing real-life projects sponsored by companies, mission organizations, and professional society competitions. The engineering first-year design projects at Olivet Nazarene University involve interdisciplinary engineering teams proposing product improvement designs, using Computer Aided Design (CAD) software. Posters for both the senior and freshman engineering design projects will be presented during this poster session.
Microplastics Fouling Mitigation In Forward Osmosis Membranes By The Molecular Assembly Of Sulfobetaine Zwitterion, 2024 Edith Cowan University
Microplastics Fouling Mitigation In Forward Osmosis Membranes By The Molecular Assembly Of Sulfobetaine Zwitterion, Javad Farahbakhsh, Mitra Golgoli, Mehdi Khiadani, Amir Razmjou, Masoumeh Zargar
Research outputs 2022 to 2026
Forward osmosis (FO) membranes have potential for the efficient water and wastewater treatment applications. However, their development has faced significant challenges due to their fouling propensity. In this study, FO membranes modified with sulfobetaine zwitterions (i.e., [2-(Methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl) ammonium hydroxide) were fabricated and used for the first time to address microplastic (MP) fouling issue. Water flux, reverse salt flux (RSF), fouling, and flux recovery were evaluated for the membranes loaded with different quantities of the zwitterions ranging from 0.25 % to 2 %. The developed membranes were tested over 49 h with feed solutions containing polyethylene MPs and bovine serum albumin …
Ensemble-Learning Model Based Ultimate Moment Prediction Of Reinforced Concrete Members Strengthened By Uhpc, 2024 Missouri University of Science and Technology
Ensemble-Learning Model Based Ultimate Moment Prediction Of Reinforced Concrete Members Strengthened By Uhpc, Woubishet Zewdu Taffese, Yanping Zhu, Genda Chen
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Data-driven model development brings new approaches to solve conventional civil engineering problems, which are usually considered and answered by experimental, analytical, and numerical methods. This study aims to develop an ensemble learning model (i.e., XGBoost: eXtreme Gradient Boosting) to predict ultimate moment of reinforced concrete (RC) members strengthened by a newly developed concrete technology – ultrahigh performance concrete (UHPC). The study considered two scenarios, incorporating eighteen and seventeen features, with one feature modification involving the transformation of width and height to the cross-sectional area of RC members. Incorporating three substrate damage levels, two substrate surface treatments preceding UHPC strengthening, and …
Performance Enhancement Of A Solar-Driven Dcmd System Using An Air-Cooled Condenser And Oil: Experimental And Machine Learning Investigations, 2024 Edith Cowan University
Performance Enhancement Of A Solar-Driven Dcmd System Using An Air-Cooled Condenser And Oil: Experimental And Machine Learning Investigations, Pooria Behnam, Abdellah Shafieian, Masoumeh Zargar, Mehdi Khiadani
Research outputs 2022 to 2026
Solar-driven direct contact membrane distillation systems (DCMD) are disadvantaged by low freshwater productivity and low gain-output-ratio (GOR). Consequently, this study aims to achieve two primary objectives: i) improving the solar DCMD performance, and ii) harnessing machine learning models for precise and straightforward modeling of the solar DCMD system. To achieve these goals, a novel solar DCMD system powered with oil-filled heat pipe evacuated tube collectors (HP-ETCs) and equipped with an air-cooled condenser was used for the first time. The system was evaluated under eight different scenarios covering both its energy and economic performances. The performance prediction of three different machine …
Bioaerosol Size As A Potential Determinant Of Airborne E. Coli Viability Under Ultraviolet Germicidal Irradiation And Ozone Disinfection, 2024 Missouri University of Science and Technology
Bioaerosol Size As A Potential Determinant Of Airborne E. Coli Viability Under Ultraviolet Germicidal Irradiation And Ozone Disinfection, Weixing Hao, Yue-Wern Huang, Yang Wang
Biological Sciences Faculty Research & Creative Works
Ultraviolet germicidal irradiation (UVGI) and ozone disinfection are crucial methods for mitigating the airborne transmission of pathogenic microorganisms in high-risk settings, particularly with the emergence of respiratory viral pathogens such as SARS-CoV-2 and avian influenza viruses. This study quantitatively investigates the influence of UVGI and ozone on the viability of E. coli in bioaerosols, with a particular focus on how E. coli viability depends on the size of the bioaerosols, a critical factor that determines deposition patterns within the human respiratory system and the evolution of bioaerosols in indoor environments. This study used a controlled small-scale laboratory chamber where E. …
Risk–Reward Share Allocation Under Different Integrated Project Delivery Relational Structures: A Monte-Carlo Simulation And Cooperative Game Theoretic Solutions Approach, 2024 Missouri University of Science and Technology
Risk–Reward Share Allocation Under Different Integrated Project Delivery Relational Structures: A Monte-Carlo Simulation And Cooperative Game Theoretic Solutions Approach, Radwa Eissa, Mohamad Abdul Nabi, Islam H. El-Adaway
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Sharing of risks and rewards is considered to be one of the key benefits and principles of integrated project delivery (IPD). Despite its importance, risk–reward strategies are not implemented widely in IPD construction projects due to the lack of a well-defined basis for establishing adequate allocation plans. This paper fills this knowledge gap. This research followed a multistep methodology. First, the authors calculated the risk control valuations of all potential combinations of coalitions for IPD stakeholders. This was performed using interrelated steps of risk identification and quantification, risk assignment based on associated contractual analysis, establishment of a coordination network, and …
Comprehensive Understanding Of Factors Impacting Competitive Construction Bidding, 2024 Missouri University of Science and Technology
Comprehensive Understanding Of Factors Impacting Competitive Construction Bidding, Muaz O. Ahmed, Islam H. El-Adaway, Aubrie Caldwell
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Construction competitive bidding has been studied by many researchers; however, their focus was mainly on certain bidding aspects. Thus, despite their value, existing bidding models have limited applicability for various reasons including the non-inclusion of some real-life factors that impact bidding-related decisions. As such, there is a need for identifying a comprehensive list of bidding factors that impact construction bidding-related decisions, studying their associations, and identifying understudied factors to direct future research efforts. This paper fills this knowledge gap. First, the authors conducted a systematic selection of 124 construction bidding-related articles published within the past 40 years. Second, the authors …
Drivers’ Hazard Avoidance During Vehicle Automation: Impact Of Mental Models And Implications For Training, 2024 University of Massachusetts Amherst
Drivers’ Hazard Avoidance During Vehicle Automation: Impact Of Mental Models And Implications For Training, Ganesh Pai Mangalore
Doctoral Dissertations
Advanced Driver Assistance Systems (ADAS) are vehicle automation systems that have become more accessible and prevalent in vehicles in recent years. But the introduction of such technologies introduces new human factors challenges. Past literature suggests that users of vehicle automation lack the necessary and appropriate knowledge about their automation system. This may play a negative role in their hazard avoidance abilities when driving with automation features. Improving mental models and knowledge could generally lead to safer interactions with vehicle automation systems, but any effort to develop hazard avoidance skills when driving with vehicle automation is impeded by the lack of …
A 4-Node Shell Finite Element Based On Assumed Bending And Membrane Strains For Static Analysis Of Plates And Shells, 2024 University of Echahid Cheikh Larbi Tebessi, Algeria
A 4-Node Shell Finite Element Based On Assumed Bending And Membrane Strains For Static Analysis Of Plates And Shells, Sifeddine Abderrahmani
Emirates Journal for Engineering Research
In this paper the development of a new rectangular flat shell element is proposed. This element is called SBRPK-SBRIE. This element is used in the numerical analysis of thin structures based on the strain approach with linear elastic behavior. Combining bending and membrane elements yields the proposed element.The strain-based rectangular finite element for the thin plate bending element denoted SBRPK, and the strain-based membrane element denoted SBRIE. Several numerical examples have been conducted to assess the accuracy and reliability of the developed element compared with the theoretical results and other finite elements. Obtained results show its good performance compared to …