Open Access. Powered by Scholars. Published by Universities.®
Science and Technology Studies Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 10 of 10
Full-Text Articles in Science and Technology Studies
Experimental And Numerical Studies Of Square Concrete-Filled Double Steel Tubular Short Columns Under Eccentric Loading, Mizen Ahmed, Qing Quan Liang, Vipulkumar I. Patel, Muhammad N. S Hadi
Experimental And Numerical Studies Of Square Concrete-Filled Double Steel Tubular Short Columns Under Eccentric Loading, Mizen Ahmed, Qing Quan Liang, Vipulkumar I. Patel, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part B
Square concrete-filled double steel tubular (CFDST) beam-columns consisting of an internal circular steel tube have increasingly been utilized in composite building structures because of their high structural performance. This paper describes experimental and numerical studies on the structural responses of square thin-walled CFDST columns loaded eccentrically. Tests on twenty short square CFDST columns were undertaken that included sixteen columns under eccentric loading and four columns under concentric loading. The parameters examined in the experiments included the cross-sectional dimensions, the width-to-thickness ratios of outer and internal tubes and loading eccentricity. The measured ultimate strengths, load-shortening responses, load-lateral displacement curves, stress-strain curves …
Local-Global Interaction Buckling Of Square High Strength Concrete-Filled Double Steel Tubular Slender Beam-Columns, Mizen Ahmed, Qing Quan Liang, Vipulkumar I. Patel, Muhammad N. S Hadi
Local-Global Interaction Buckling Of Square High Strength Concrete-Filled Double Steel Tubular Slender Beam-Columns, Mizen Ahmed, Qing Quan Liang, Vipulkumar I. Patel, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part B
High-strength square concrete-filled double steel tubular (CFDST) slender beam-columns with a circular internal steel tube subjected to eccentric loads may undergo interaction local-global buckling. No computational studies on the interaction local-global buckling of slender square CFDST beam-columns have been reported and their behavior has not been fully understood. This paper describes a mathematical model for the simulation of the interaction local-global buckling behavior of square high-strength CFDST slender beam-columns under axial compression in combination with uniaxial bending. The mathematical model is formulated by the fiber approach, accounting for confinement provided by the internal circular steel tube, and geometric and material …
Numerical Analysis Of Axially Loaded Rectangular Concrete-Filled Steel Tubular Short Columns At Elevated Temperatures, Ghanim Mohammed Kamil, Qing Quan Liang, Muhammad N. S Hadi
Numerical Analysis Of Axially Loaded Rectangular Concrete-Filled Steel Tubular Short Columns At Elevated Temperatures, Ghanim Mohammed Kamil, Qing Quan Liang, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part B
Elevated temperatures significantly reduce the local buckling strengths of steel tubes and the ultimate strengths of rectangular concrete-filled steel tubular (CFST) columns exposed to fire. No fiber-based models have been developed that include local buckling effects on the fire-resistance of rectangular CFST columns. This paper presents a new fiber element model for the fire-resistance predictions of axially loaded rectangular CFST short columns at elevated temperatures considering local buckling. The thermal analysis problem of a CFST column is solved by the finite difference method to determine the temperature distribution within its cross-section including an air gap, concrete moisture content and the …
Numerical Analysis Of Axially Loaded Circular High Strength Concrete-Filled Double Steel Tubular Short Columns, Mizen Ahmed, Qing Quan Liang, Vipulkumar I. Patel, Muhammad N. S Hadi
Numerical Analysis Of Axially Loaded Circular High Strength Concrete-Filled Double Steel Tubular Short Columns, Mizen Ahmed, Qing Quan Liang, Vipulkumar I. Patel, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part B
Circular high-strength concrete-filled double steel tubular (CFDST) columns are high performance members where the internal and external steel tubes offer significant confinement to the concrete infill. The confinement remarkably improves the concrete compressive strength and ductility. However, no fiber element models have been formulated for computing the responses of CFDST columns with circular steel tubes filled with high-strength concrete incorporating accurate confinement to the core and sandwiched concrete. In this paper, a new fiber-based numerical model is developed that computes the axial load-strain responses of circular high-strength CFDST short columns under axial loading. Based on existing experimental results, a new …
Axial-Flexural Interaction Diagram Of Rpc Columns Reinforced With Steel Fibres, Ahmed Al-Tikrite, Muhammad N. S Hadi
Axial-Flexural Interaction Diagram Of Rpc Columns Reinforced With Steel Fibres, Ahmed Al-Tikrite, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part B
This paper presents analytical modelling of the axial-flexural behaviour of Reactive Powder Concrete (RPC) columns reinforced with and without steel fibres of different types (industrial and waste) in individual and hybrid forms. An analytical stress-strain model for unconfined RPC was used for the analysis of the axial loads and bending moments of the fibrous RPC columns. The layer-by-layer numerical integration method was used to calculate the axial load and bending moments in this study. The analytically developed axial load-bending moment ( P-M ) interaction diagrams were validated by using experimental results from the literature. A para- metric study was carried …
Experimental Evaluation Of Tensile Strength Test Methods For Steel Fibre-Reinforced Concrete, Hussam A. Goaiz, Nabeel Farhan, M Neaz Sheikh, Tao Yu, Muhammad N. S Hadi
Experimental Evaluation Of Tensile Strength Test Methods For Steel Fibre-Reinforced Concrete, Hussam A. Goaiz, Nabeel Farhan, M Neaz Sheikh, Tao Yu, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part B
This study presents an experimental evaluation of three different methods for determining the tensile strength of steel fibre reinforced concrete (SFRC). The test methods include the splitting test (ST), double punch test (DPT) and direct tensile test (DTT). The compressive strength of the concrete used in this study ranged between 30 and 80 MPa with 0%, 1·5% and 3% steel fibre by volume of the concrete. In total, 81 concrete cylinders were cast and tested for 28-d compressive strength, splitting tensile strength and double punch tensile strength of the concrete. In addition, 27 concrete prism specimens were cast and tested …
Effect Of Water-Based Nanolubricant Containing Nano-Tio2 On Friction And Wear Behaviour Of Chrome Steel At Ambient And Elevated Temperatures, Hui Wu, Fanghui Jia, Jingwei Zhao, Shuiquan Huang, Lianzhou Wang, Sihai Jiao, Han Huang, Zhengyi Jiang
Effect Of Water-Based Nanolubricant Containing Nano-Tio2 On Friction And Wear Behaviour Of Chrome Steel At Ambient And Elevated Temperatures, Hui Wu, Fanghui Jia, Jingwei Zhao, Shuiquan Huang, Lianzhou Wang, Sihai Jiao, Han Huang, Zhengyi Jiang
Faculty of Engineering and Information Sciences - Papers: Part B
A novel experimental method was developed through a ball-on-disk tribometer to study the friction and wear behaviour of a chrome steel at temperatures of 25, 200 and 500 °C. Water-based nanolubricants containing different concentrations of nano-TiO2 from 0.4 to 8.0 wt% were used to investigate their effects on friction-reduction and anti-wear mechanisms, in comparison to the benchmarks under dry and water conditions. The results show that the water-based nanolubricants can significantly reduce coefficient of friction (COF) and improve wear resistance of the chrome steel at both ambient and elevated temperatures. In particular, the use of nanolubricant containing an optimal concentration …
Fiber Element Simulation Of Interaction Behavior Of Local And Global Buckling In Axially Loaded Rectangular Concrete-Filled Steel Tubular Slender Columns Under Fire Exposure, Ghanim Mohammed Kamil, Qing Quan Liang, Muhammad N. S Hadi
Fiber Element Simulation Of Interaction Behavior Of Local And Global Buckling In Axially Loaded Rectangular Concrete-Filled Steel Tubular Slender Columns Under Fire Exposure, Ghanim Mohammed Kamil, Qing Quan Liang, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part B
Slender rectangular thin-walled concrete-filled steel tubular (CFST) columns in composite building structures exposed to fire may experience the interaction of local and global buckling. Numerical investigations on the interaction buckling responses of such columns under fire exposure have been rarely reported. This paper describes a fiber-based computational model for the prediction of the fire-resistance and interaction responses of local and global buckling of concentrically-loaded slender CFST columns made of rectangular sections exposed to fire. The thermal analysis is undertaken to calculate the distribution of temperatures in the column cross-section considering the effects of the air gap between concrete and steel, …
Nonlinear Post-Fire Simulation Of Concentrically Loaded Rectangular Thin-Walled Concrete-Filled Steel Tubular Short Columns Accounting For Progressive Local Buckling, Ghanim Mohammed Kamil, Qing Quan Liang, Muhammad N. S Hadi
Nonlinear Post-Fire Simulation Of Concentrically Loaded Rectangular Thin-Walled Concrete-Filled Steel Tubular Short Columns Accounting For Progressive Local Buckling, Ghanim Mohammed Kamil, Qing Quan Liang, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part B
The repair of fire-damaged thin-walled rectangular concrete-filled steel tubular (CFST) columns in engineering structures after fire exposure requires the assessment of their residual strength and stiffness. Existing numerical models have not accounted for the effects of local buckling on the post-fire behavior of CFST columns with rectangular thin-walled sections. This paper describes a nonlinear post-fire simulation technique underlying the theory of fiber analysis for determining the residual strengths and post-fire responses of concentrically loaded short thin-walled rectangular CFST columns accounting for progressive local buckling. The post-fire stress-strain laws for concrete in rectangular CFST columns are proposed based on available test …
Behavior Of Eccentrically Loaded Double Circular Steel Tubular Short Columns Filled With Concrete, Mizen Ahmed, Qing Quan Liang, Vipulkumar I. Patel, Muhammad N. S Hadi
Behavior Of Eccentrically Loaded Double Circular Steel Tubular Short Columns Filled With Concrete, Mizen Ahmed, Qing Quan Liang, Vipulkumar I. Patel, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part B
Circular concrete-filled double steel tubular (CFDST) columns in high-rise building structures possess high ductility and strength performance owing to the concrete confinement exerted by the external and internal circular steel tubes. However, the behavior of circular CFDST short columns that are loaded eccentrically has not been investigated either experimentally or numerically. Particularly, numerical studies on the moment-curvature responses, strength envelopes, confinement effects and moment distributions in circular CFDST beam-columns have not been reported. In this paper, experimental and computational investigations into the structural responses of circular CFDST short columns loaded eccentrically are presented. Nineteen short circular CFDST columns with various …