Open Access. Powered by Scholars. Published by Universities.®

Social and Behavioral Sciences Commons

Open Access. Powered by Scholars. Published by Universities.®

Faculty of Engineering and Information Sciences - Papers: Part A

Development

Articles 1 - 30 of 52

Full-Text Articles in Social and Behavioral Sciences

Development Of Microencapsulated Phase Change Material For Solar Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis Jan 2017

Development Of Microencapsulated Phase Change Material For Solar Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis

Faculty of Engineering and Information Sciences - Papers: Part A

In this paper a novel microencapsulated phase change material (MF-3) has been developed and tested for solar assisted hot water storage systems. Even though the morphology of the sample was affected by the type of emulsifier used for fabrication it recorded the highest energy storage capacity of 126 kJ/kg with encapsulation efficiency of 97.4% as compared with other developed samples. For the purpose of assessing its thermal effectiveness it was theoretically evaluated in a compacted fixed bed TES unit and found to be capable of achieving a higher energy storage density as well as relatively smaller physical storage ...


Development Of A Dynamic Model For A Hybrid Photovoltaic Thermal Collector - Solar Air Heater With Fins, Wenke Fan, Georgios Kokogiannakis, Zhenjun Ma, Paul Cooper Jan 2017

Development Of A Dynamic Model For A Hybrid Photovoltaic Thermal Collector - Solar Air Heater With Fins, Wenke Fan, Georgios Kokogiannakis, Zhenjun Ma, Paul Cooper

Faculty of Engineering and Information Sciences - Papers: Part A

A dynamic model for a hybrid Photovoltaic Thermal Collector-Solar Air Heater (PVT-SAH) with longitudinal fins was developed to enable assessment of the potential of the system to provide high temperature outlet air (60-90 °C) under dynamic boundary conditions. The model description includes the method for discretising the system into a number of control volumes, the energy balance equations for each control volume and the implementation of the numerical solution. Model validation has been successfully undertaken by using empirical verification of model predictions with an experimental facility and by comparing the model outputs with the reference data from the literature. The ...


Development Of A Novel Multi-Layer Mre Isolator For Suppression Of Building Vibrations Under Seismic Events, Jian Yang, Shuaishuai Sun, Tongfei Tian, Weihua Li, Haiping Du, Gursel Alici, Masami Nakano Jan 2016

Development Of A Novel Multi-Layer Mre Isolator For Suppression Of Building Vibrations Under Seismic Events, Jian Yang, Shuaishuai Sun, Tongfei Tian, Weihua Li, Haiping Du, Gursel Alici, Masami Nakano

Faculty of Engineering and Information Sciences - Papers: Part A

Protecting civil engineering structures from uncontrollable events such as earthquakes while maintaining their structural integrity and serviceability is very important; this paper describes the performance of a stiffness softening magnetorheological elastomer (MRE) isolator in a scaled three storey building. In order to construct a closed-loop system, a scaled three storey building was designed and built according to the scaling laws, and then four MRE isolator prototypes were fabricated and utilised to isolate the building from the motion induced by a scaled El Centro earthquake. Fuzzy logic was used to output the current signals to the isolators, based on the real-time ...


Development Of A Novel Phase Change Material Emulsion For Cooling Systems, Jingjing Shao, Jo Darkwa, Georgios Kokogiannakis Jan 2016

Development Of A Novel Phase Change Material Emulsion For Cooling Systems, Jingjing Shao, Jo Darkwa, Georgios Kokogiannakis

Faculty of Engineering and Information Sciences - Papers: Part A

In this paper, a novel phase change material emulsion (PCE-10) consisting of an organic PCM (RT10) and water has been developed. Its thermophysical properties such as heat of fusion, viscosity and sub-cooling temperature have been established. The chemical stability during both storage and discharge periods have also been evaluated. The results indicate low sub-cooling temperature and relatively long period of stability without any sign of segregation but the viscosity was found to be much higher than that of water.Further improvement and experimental studies into its flow characteristics are therefore being encouraged.


Development And Performance Evaluation Of A Liquid Desiccant Air Conditioning System With Hybrid Electrodialysis And Thermal Regeneration, Yi Guo, Zhenjun Ma, Ali Hussein Al-Jubainawi, Paul Cooper, Long D. Nghiem Jan 2016

Development And Performance Evaluation Of A Liquid Desiccant Air Conditioning System With Hybrid Electrodialysis And Thermal Regeneration, Yi Guo, Zhenjun Ma, Ali Hussein Al-Jubainawi, Paul Cooper, Long D. Nghiem

Faculty of Engineering and Information Sciences - Papers: Part A

Liquid desiccant air conditioning (LDAC) systems have gained increasing attention due to the improved energy performance and reduced environmental impacts. This paper presents an LDAC system using electrodialysis (ED) as well as low grade heat generated from a hybrid photovoltaic thermal and evacuated tube (PVT-ET) collector for liquid desiccant regeneration. As ED regenerator is a key component in the proposed system, a modified mathematical model is used to simulate the mass transfer of the ED stack. The performance of the model was validated using the experimental data generated based on a lab-scale experimental setup. It is shown that the model ...


Development Of Intermediate Cooling Technology And Its Control For Two-Stand Plate Rolling, Fei Zhang, Wei Yu, Tao Liu Jan 2016

Development Of Intermediate Cooling Technology And Its Control For Two-Stand Plate Rolling, Fei Zhang, Wei Yu, Tao Liu

Faculty of Engineering and Information Sciences - Papers: Part A

In a plate rolling production line, thermomechanically controlled processing is critical for plate quality. In this paper, a set of intermediate cooling equipment of a two-stand plate mill with super density nozzles, medium pressure, and small flow is developed. Based on a simplified dynamic model, a cooling control scheme with combined feedforward, feedback, and adaptive algorithms is put forward. The new controlled rolling process and the highly efficient control system improve the controlled rolling efficiency by an average of 17.66%. The proposed intermediate cooling system can also effectively inhibit the growth of austenite grain, improve the impact toughness and ...


Characterisation And Resource Development Of Steel Plant By-Product Streams, Raymond Longbottom, Brian J. Monaghan, Guangqing Zhang, Sheng Chew, David J. Pinson Jan 2016

Characterisation And Resource Development Of Steel Plant By-Product Streams, Raymond Longbottom, Brian J. Monaghan, Guangqing Zhang, Sheng Chew, David J. Pinson

Faculty of Engineering and Information Sciences - Papers: Part A

The recycling of steel plant by-products is a critical issue that needs thorough assessment and development for the sustainability of the integrated steel plant, from both environmental and economical perspectives. Research is being undertaken in the Steel Research Hub that aims to realise the value of by-products to the Australian steel industry and minimise the amount of by-product going to long term stockpile. As the first step, dust from basic oxygen steelmaking (BOS), a major steel plant by-product stream, is being characterised so that its potential use on plant or elsewhere can be assessed and evaluated. BOS dust contains components ...


Revisiting An Information Infrastructure For Development: Exploring The Cost Of Information In Pacific Island Development, William J. Tibben Jan 2016

Revisiting An Information Infrastructure For Development: Exploring The Cost Of Information In Pacific Island Development, William J. Tibben

Faculty of Engineering and Information Sciences - Papers: Part A

Information and communication technologies (ICTs) have been associated with development programmes for many decades. A theme of Lamberton's commentary on such initiatives focuses on the lack of attention given to information as a key factor in the development process. His writing reiterated a number of arguments that he saw as being fundamental to the application of an information perspective to development issues. With a focus on agricultural development policy in the Pacific region, the paper uses a number of propositions that are suggested by Lamberton to analyse contemporary development initiatives in Pacific Island agriculture. These propositions focus attention on ...


Design And Development Of A Parametrically Excited Nonlinear Energy Harvester, Tanju Yildirim, Mergen H. Ghayesh, Weihua Li, Gursel Alici Jan 2016

Design And Development Of A Parametrically Excited Nonlinear Energy Harvester, Tanju Yildirim, Mergen H. Ghayesh, Weihua Li, Gursel Alici

Faculty of Engineering and Information Sciences - Papers: Part A

An energy harvester has been designed, fabricated and tested based on the nonlinear dynamical response of a parametrically excited clamped-clamped beam with a central point-mass; magnets have been used as the central point-mass which pass through a coil when parametrically excited. Experiments have been conducted for the energy harvester when the system is excited (i) harmonically near the primary resonance; (ii) harmonically near the principal parametric resonance; (iii) by means of a non-smooth periodic excitation. An electrodynamic shaker was used to parametrically excite the system and the corresponding displacement of the magnet and output voltages of the coil were measured ...


Development Of Electrospun Photocatalytic Tio2-Polyamide-12 Nanocomposites, E Cossich, R Bergamasco, M T. Pessoa De Amorim, P M. Martins, J Marques, Carlos J. Tavares, Senentxu Lanceros-Méndez, Vitor Sencadas Jan 2015

Development Of Electrospun Photocatalytic Tio2-Polyamide-12 Nanocomposites, E Cossich, R Bergamasco, M T. Pessoa De Amorim, P M. Martins, J Marques, Carlos J. Tavares, Senentxu Lanceros-Méndez, Vitor Sencadas

Faculty of Engineering and Information Sciences - Papers: Part A

Titanium dioxide (TiO2) in different forms such as films, fibers or particles are being extensively studied for removal of contaminants from aquatic environments due to its outstanding photocatalytic activity. This work reports the development of TiO2-polyamide 12 electrospun fiber mats. A systematic study on the influence of electrospun processing parameters on polymer fiber morphology was performed. It was observed that the average fiber diameter is mainly influenced by polymer concentration and average fiber diameters between 404 ± 82 nm and 1442 ± 360 nm were obtained. Polyamide-12 (PA-12) was used as a polymer matrix and electrospun with 0, 10 and ...


Development Of Servo-Type Micro-Hydromechanical Deep-Drawing Apparatus And Micro Deep-Drawing Experiments Of Circular Cups, Hideki Sato, Kenichi Manabe, Kikukatsu Ito, Dongbin Wei, Zhengyi Jiang Jan 2015

Development Of Servo-Type Micro-Hydromechanical Deep-Drawing Apparatus And Micro Deep-Drawing Experiments Of Circular Cups, Hideki Sato, Kenichi Manabe, Kikukatsu Ito, Dongbin Wei, Zhengyi Jiang

Faculty of Engineering and Information Sciences - Papers: Part A

A micro-hydromechanical deep-drawing (MHDD) apparatus for manufacturing a micro-complex-shape components and increasing of drawn cup accuracy has been developed in this study. This apparatus with simple tooling structure and forming process can achieve high dimensional accuracy using servo press mechanics with a double-action type, one-stroke forming process without transferring and positioning, force control, and fine flow rate control of the pressure medium. The developed MHDD apparatus can prevent wrinkling by applying an appropriate constant gap and Stably generate the counterpressure. Micro drawn cups of 0.8 mm diameter are successfully fabricated. Also, the effects of counterpressure on drawability and dimensional ...


Development Of A Novel Variable Stiffness And Damping Magnetorheological Fluid Damper, Shuaishuai Sun, Jian Yang, Weihua Li, Huaxia Deng, Haiping Du, Gursel Alici Jan 2015

Development Of A Novel Variable Stiffness And Damping Magnetorheological Fluid Damper, Shuaishuai Sun, Jian Yang, Weihua Li, Huaxia Deng, Haiping Du, Gursel Alici

Faculty of Engineering and Information Sciences - Papers: Part A

This paper reports a novel magnetorheological fluid (MRF)-based damper, which synergizes the attributes of variable stiffness and damping through the compact assembly of two MRF damping units and a spring. The magnetic field densities of the two damping units were analyzed. After the prototype of the new MRF damper, a hydraulically actuated MTS machine was used to test the damper's performance, including stiffness variability and damping variability, amplitudedependent responses and frequency-dependent responses. A new mathematical model was developed to describe the variable stiffness and damping MRF damper. The successful development, experimental testing and modeling of this innovative variable ...


Development And Optimization Of An Innovative Hvac System With Integrated Pvt And Pcm Thermal Storage For A Net-Zero Energy Retrofitted House, Massimo Fiorentini, Paul Cooper, Zhenjun Ma Jan 2015

Development And Optimization Of An Innovative Hvac System With Integrated Pvt And Pcm Thermal Storage For A Net-Zero Energy Retrofitted House, Massimo Fiorentini, Paul Cooper, Zhenjun Ma

Faculty of Engineering and Information Sciences - Papers: Part A

This paper describes a novel solar-assisted HVAC system developed for the Team UOW 'Illawarra Flame' Solar Decathlon house, the winner of the Solar Decathlon China 2013 competition. This HVAC system consists of an air-based photovoltaic-thermal (PVT) collector and a phase change material (PCM) thermal storage unit integrated with a reverse cycle heat pump, in a ducted system. The system was designed for operation during both winter and summer using daytime solar radiation and night-time sky radiative cooling, respectively. The PVT collector heats or cools fresh air from ambient and thereby provides heating or cooling either directly to the indoor space ...


Development Of An Mre Adaptive Tuned Vibration Absorber With Self-Sensing Capability, Shuaishuai Sun, Jian Yang, Weihua Li, Huaxia Deng, Haiping Du, Gursel Alici Jan 2015

Development Of An Mre Adaptive Tuned Vibration Absorber With Self-Sensing Capability, Shuaishuai Sun, Jian Yang, Weihua Li, Huaxia Deng, Haiping Du, Gursel Alici

Faculty of Engineering and Information Sciences - Papers: Part A

In this paper, self-sensing technology was introduced into an adaptive tuned vibration absorber, incorporating a laminated magnetorheological elastomer (MRE) structure, a hybrid magnetic system and a self-sensing component. The adoption of the laminated MRE structure and the hybrid magnetic system enables the absorber to have higher lateral flexibility and a wider effective frequency range. The integration of the self-sensing capability allows the absorber to operate without sensors and, at the same time, greatly reduces costs, required space and maintenance. A series of experiments were conducted to measure the frequency shift property, to verify the self-sensing capability and to evaluate its ...


Development Of A Linear Damper Working With Magnetorheological Shear Thickening Fluids, Jian Yang, Shuaishuai Sun, Weihua Li, Haiping Du, Gursel Alici, Masami Nakano Jan 2015

Development Of A Linear Damper Working With Magnetorheological Shear Thickening Fluids, Jian Yang, Shuaishuai Sun, Weihua Li, Haiping Du, Gursel Alici, Masami Nakano

Faculty of Engineering and Information Sciences - Papers: Part A

Magnetorheological shear thickening fluid is a smart material that exhibits both magnetorheological and shear thickening effects. This study focuses on the design and development of a novel magnetorheological shear thickening fluid-based linear damper. First, micron-sized carbonyl iron particles, at a 20% and 80% weight fraction, were immersed among the shear thickening fluid base and thoroughly mixed under a high shear condition to produce the magnetorheological shear thickening fluid. Then, a monotube damper with a bypass was designed and fabricated. The testing results using an MTS machine show that the influence of incorporating shear thickening fluid allows the 20% magnetorheological shear ...


Dependence Of Texture Development On The Grain Size Of Tertiary Oxide Scales Formed On A Microalloyed Steel, Xianglong Yu, Zhengyi Jiang, Jingwei Zhao, Dongbin Wei, Ji Zhou, Cunlong Zhou, Qingxue Huang Jan 2015

Dependence Of Texture Development On The Grain Size Of Tertiary Oxide Scales Formed On A Microalloyed Steel, Xianglong Yu, Zhengyi Jiang, Jingwei Zhao, Dongbin Wei, Ji Zhou, Cunlong Zhou, Qingxue Huang

Faculty of Engineering and Information Sciences - Papers: Part A

Both orientational and geometrical characteristics of grains in tertiary oxide scales have been quantitatively investigated using the electron backscatter diffraction (EBSD) technique. Phase and orientation mappings demonstrate that the {001} planes of magnetite and the {0001} planes of hematite are parallel to the direction of oxide growth. Pole figures (PFs) as scattering plots clearly display the direct correlation between the orientations and microstructure sites of magnetite grains. Magnetite grains develop a strong rotated cube texture component that shifts to the {100} component, whereas those with the grain size of 1-5. μm develop the {001} cube texture component. The refined magnetite ...


Aligning Ontology-Based Development With Service Oriented Systems, Jun Shen, Ghassan Beydoun, Graham Low, Lijuan Wang Jan 2014

Aligning Ontology-Based Development With Service Oriented Systems, Jun Shen, Ghassan Beydoun, Graham Low, Lijuan Wang

Faculty of Engineering and Information Sciences - Papers: Part A

This paper argues for placing ontologies at the centre of the software development life cycle for distributed component-based systems and, in particular, for service-oriented systems. It presents an ontology-based development process which relies on three levels of abstraction using ontologies: architecture layer, application layer and domain layer. The paper discusses the key roles of ontologies with respect to the various abstraction layers and their corresponding impact on the concomitant workproducts. In addition, a peer-to-peer-based service selecting and composing tool is suggested as a way of supporting the process. The paper presents the architecture of the proposed tool and illustrates the ...


Development Of Databases For Facilitating Green Roof Energy Simulation Assessments, Aloysius Decruz, Georgios Kokogiannakis, Jo Darkwa, Kate Yuan, Paul Strachan Jan 2014

Development Of Databases For Facilitating Green Roof Energy Simulation Assessments, Aloysius Decruz, Georgios Kokogiannakis, Jo Darkwa, Kate Yuan, Paul Strachan

Faculty of Engineering and Information Sciences - Papers: Part A

Assessments of the energy performance of green roofs have traditionally been performed with experimental and modelling procedures. Experimental green roof energy studies have significant disadvantages (expensive, time-consuming, cannot be generalised, etc.). On the other hand, modelling studies are often done with over-simplified models (for example, by ignoring the effect of moisture flows in the green roof layers) or with detailed models that require inputs which are often difficult to be obtained in practice and may involve a certain degree of uncertainty. This paper describes the methodologies for the development of databases that include data inputs that could be used within ...


Shuttle Car Network For Roadway Development, Dalin Cai, Ernest Baafi, Ian Porter Jan 2014

Shuttle Car Network For Roadway Development, Dalin Cai, Ernest Baafi, Ian Porter

Faculty of Engineering and Information Sciences - Papers: Part A

Australian underground coal mines predominately use the longwill method for coal extraction. In longwall mining at least two parallel roadways known as gateroads are mined to delineate the sides of the longwall block, a longwall installation face is then driven connecting the gatheroads to enable the longwall mining equipment to be installed. Roadway development should ideally be ahead of the longwall so that the longwall equipment can be installed into the newly developed panel with minimal delay to coal production. A discrete event mode of roadway development can help asses how a particular configuration may perform with high levels of ...


Development And Validation Of A Disaster Management Metamodel (Dmm), Siti Hajar Othman, Ghassan Beydoun, Vijayan Sugumaran Jan 2014

Development And Validation Of A Disaster Management Metamodel (Dmm), Siti Hajar Othman, Ghassan Beydoun, Vijayan Sugumaran

Faculty of Engineering and Information Sciences - Papers: Part A

Disaster Management (DM) is a diffused area of knowledge. It has many complex features interconnecting the physical and the social views of the world. Many international and national bodies create knowledge models to allow knowledge sharing and effective DM activities. But these are often narrow in focus and deal with specified disaster types. We analyze thirty such models to uncover that many DM activities are actually common even when the events vary. We then create a unified view of DM in the form of a metamodel. We apply a metamodelling process to ensure that this metamodel is complete and consistent ...


Design And Development Of A Novel Displacement Differential Self-Induced Magnetorheological Damper, Guoliang Hu, Yi Ru, Weihua Li Jan 2014

Design And Development Of A Novel Displacement Differential Self-Induced Magnetorheological Damper, Guoliang Hu, Yi Ru, Weihua Li

Faculty of Engineering and Information Sciences - Papers: Part A

This article presents the development of a novel magnetorheological damper which has a self-sensing ability. In this study, a linear variable differential sensor, which was based on the electromagnetic induction mechanism, was integrated with a conventional magnetorheological damper. The working principle, configuration, and prototype of the displacement differential self-induced magnetorheological damper based on the integrated linear variable differential sensor technology were presented. A mathematical model of the proposed displacement differential self-induced magnetorheological damper was established. The finite element model was built with two-dimensional Maxwell software and the magnetic simulations were presented. With this approach, the influence of the flux leakage ...


Development Of High Melting Temperature Microencapsulated Phase Change Material For Compacted Thermal Energy Storage Bed, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis Jan 2014

Development Of High Melting Temperature Microencapsulated Phase Change Material For Compacted Thermal Energy Storage Bed, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis

Faculty of Engineering and Information Sciences - Papers: Part A

In this paper a novel high temperature microencapsulated phase change material (MEPCM) based on paraffin as the core material and MF resin as the shell material has been developed with the in-situ polymerization method for solar hot water storage application. The results showed that the type of emulsifier could influence core material content, the encapsulation efficiency as well as the latent heat capacity. Based on the results and analysis the study has shown that energy storage density could be increased by as much as 59% if 60wt% of MEPCM 1 was to be used in the proposed compacted MEPCM-water bed ...


Meta-Development Of Resources And Learning Designs: Providing Ict-Based Tools For Use By Mathematics Teachers, Maman Fathurrohman, Anne Porter, Annette Worthy Jan 2013

Meta-Development Of Resources And Learning Designs: Providing Ict-Based Tools For Use By Mathematics Teachers, Maman Fathurrohman, Anne Porter, Annette Worthy

Faculty of Engineering and Information Sciences - Papers: Part A

This paper is a report of a meta-development research project of mathematical learning resources and learning designs. The process of meta-development was conducted through mapping of mathematical learning resources and learning designs based on an observation of 119 participating teachers in Bojonegara Sub District, Indonesia. The outcomes of the meta-development include two prototypes that are similar in concept, yet different in function: the first prototypes can be use for mapping mathematical learning resources in the Internet, while the second prototype can be use for documenting and sharing mathematics teaching and learning experiences. The prototypes were evaluated based on trial with ...


Coastal Reservoirs Strategy For Water Resource Development-A Review Of Future Trend, Jianli Liu, Shu-Qing Yang, Changbo Jiang Jan 2013

Coastal Reservoirs Strategy For Water Resource Development-A Review Of Future Trend, Jianli Liu, Shu-Qing Yang, Changbo Jiang

Faculty of Engineering and Information Sciences - Papers: Part A

Water use and access become a more and more important determinant of environmental equity and human development according to the view held by the UN [1]. Water scarcity is one of the major crises which has overarching implications for other world problems especially poverty, hunger, ecosystem degradation, desertification, climate change, threatening world peace and security [2]. In the decades to come, freshwater consumed by human will get to a tipping point. Many projects and concepts have been proposed and implemented for several years to improve the effectiveness of us-ing water. These research activities can be grouped as: desalination plants; water ...


Development Of The Quality Of Australian Nursing Documentation In Aged Care (Qandac) Instrument To Measure Paper-Based And Electronic Resident Records, Ning Wang, Catrin Bjorvell, Ping Yu Jan 2013

Development Of The Quality Of Australian Nursing Documentation In Aged Care (Qandac) Instrument To Measure Paper-Based And Electronic Resident Records, Ning Wang, Catrin Bjorvell, Ping Yu

Faculty of Engineering and Information Sciences - Papers: Part A

Aim: To develop an Australian nursing documentation in aged care (Quality of Australian Nursing Documentation in Aged Care (QANDAC)) instrument to measure the quality of paper-based and electronic resident records. Methods: The instrument was based on the nursing process model and on three attributes of documentation quality identified in a systematic review. The development process involved five phases following approaches to designing criterion-referenced measures. The face and content validities and the inter-rater reliability of the instrument were estimated using a focus group approach and consensus model. Results: The instrument contains 34 questions in three sections: completion of nursing history and ...


Development Of Adaptive Seismic Isolators For Ultimate Seismic Protection Of Civil Structures, Jianchun Li, Yan-Cheng Li, Weihua Li, Bijan Samali Jan 2013

Development Of Adaptive Seismic Isolators For Ultimate Seismic Protection Of Civil Structures, Jianchun Li, Yan-Cheng Li, Weihua Li, Bijan Samali

Faculty of Engineering and Information Sciences - Papers: Part A

Base isolation is the most popular seismic protection technique for civil engineering structures. However, research has revealed that the traditional base isolation system due to its passive nature is vulnerable to two kinds of earthquakes, i.e. the near-fault and far-fault earthquakes. A great deal of effort has been dedicated to improve the performance of the traditional base isolation system for these two types of earthquakes. This paper presents a recent research breakthrough on the development of a novel adaptive seismic isolation system as the quest for ultimate protection for civil structures, utilizing the field-dependent property of the magnetorheological elastomer ...


Development Of Safe Optimized Welding Procedures For High Strength Q&T Steel Welded With Austenitic Consumables, Lenka Kuzmikova, Huijun Li, John Norrish, Zengxi Stephen Pan, Nathan Larkin Jan 2013

Development Of Safe Optimized Welding Procedures For High Strength Q&T Steel Welded With Austenitic Consumables, Lenka Kuzmikova, Huijun Li, John Norrish, Zengxi Stephen Pan, Nathan Larkin

Faculty of Engineering and Information Sciences - Papers: Part A

High strength quenched and tempered (Q&T) steels offer obvious economic benefits originating from their advantageous strength to price and weight ratios. These steels are usually welded using ferritic consumables and for this combination the risk of hydrogen assisted cold cracking (HACC) is high. The use of austenitic stainless steel (ASS) consumables has great potential to significantly improve this issue. Yet, there are no guidelines for determination of safe level of preheat for welding ferritic steels with ASS consumables. For this reason manufacturers adopt this parameter from procedures developed for conventional ferritic consumables thus significantly limiting the benefits ASS consumables ...


Radiation Damage Of Biomolecules (Radam) Database Development: Current Status, S Denifl, Gustavo Garcia, B A. Huber, B P. Marinkovic, N Mason, J Postler, H Rabus, G Rixon, A V. Solov'yov, E Suraud, A V. Yakubovich Jan 2013

Radiation Damage Of Biomolecules (Radam) Database Development: Current Status, S Denifl, Gustavo Garcia, B A. Huber, B P. Marinkovic, N Mason, J Postler, H Rabus, G Rixon, A V. Solov'yov, E Suraud, A V. Yakubovich

Faculty of Engineering and Information Sciences - Papers: Part A

Ion beam therapy offers the possibility of excellent dose localization for treatment of malignant tumours, minimizing radiation damage in normal tissue, while maximizing cell killing within the tumour. However, as the underlying dependent physical, chemical and biological processes are too complex to treat them on a purely analytical level, most of our current and future understanding will rely on computer simulations, based on mathematical equations, algorithms and last, but not least, on the available atomic and molecular data. The viability of the simulated output and the success of any computer simulation will be determined by these data, which are treated ...


Inter-Organisational Knowledge Sharing In Regional Sustainable Development Communities, Rosemary Van Der Meer, Luba Torlina, Jamie Mustard Jan 2013

Inter-Organisational Knowledge Sharing In Regional Sustainable Development Communities, Rosemary Van Der Meer, Luba Torlina, Jamie Mustard

Faculty of Engineering and Information Sciences - Papers: Part A

There has been an increasing interest in the use of inter-organisational groups to address regional implications in sustainable development. These groups bring together local knowledge and expertise and span boundaries between government and industry organisations. Our focus is in understanding how knowledge is shared in such inter-organisational groups. Utilising interviews, observations and social network analysis, we examine the knowledge sharing implications derived from the mixed membership, multilevel interaction, and the need to span boundaries with external organisations in these collaborations.


Teaching Monte Carlo Codes At University: Development Of A Geant4 Course For Students Of Schools Of Physics, Susanna Guatelli, Dean Cutajar, Anatoly B. Rosenfeld, Catherine Layton Jan 2012

Teaching Monte Carlo Codes At University: Development Of A Geant4 Course For Students Of Schools Of Physics, Susanna Guatelli, Dean Cutajar, Anatoly B. Rosenfeld, Catherine Layton

Faculty of Engineering and Information Sciences - Papers: Part A

Nowadays, it is important that students of Schools of Physics include the study of Monte Carlo codes in their curriculum as these codes are widely used in research. At the School of Engineering Physics of the University of Wollongong, we designed and set in place a Geant4 course addressed to the Medical Physics domain. In this paper, we illustrate the main features of the course and its development since 2010. The design of this course maybe adopted to teach Geant4 or any other Monte Carlo code, and in general to teach complex software tools to students with limited computing background ...