Physics Commons^™

Passive Ranging Using A Dispersive Spectrometer And Optical Filters, Jacob A. Martin

Theses and Dissertations

Monocular passive ranging using atmospheric oxygen absorption has been demonstrated in the past using an FTS. These instruments are very sensitive to vibration making them di cult to use on an airborne platform. This work focuses on whether passive ranging can be done with instruments that are easier to deploy. Two potential instruments are tested and compared: a diffraction grating spectrometer and optical filters. A grating spectrometer was able to estimate range to within 5% for a static solid rocket motor ring at a distance of 910 m using the NIR absorption band of oxygen. Testing at shorter ranges produced …

Epr And Endor Studies Of Point Defects In Lithium Tetraborate Crystals, Douglas A. Buchanan

Theses and Dissertations

Lithium tetraborate (Li2B4O7 or LTB) is a promising material for both radiation dosimetry and neutron detection applications. LTB crystals can be grown pure or doped with different impurities including transition-metal and rare-earth ions. Research in this dissertation focuses on undoped LTB crystals and LTB crystals doped with copper and silver. Electron paramagnetic resonance (EPR) and electron-nuclear double resonance (ENDOR) are used to characterize point defects in the lithium tetraborate crystals. Thermoluminescence (TL), photoluminescence (PL), photoluminescence excitation (PLE), and optical absorption (OA) are also used. An intrinsic hole trap associated with lithium vacancies is characterized with EPR and ENDOR and its …

Investigation Of Low-Stress Silicon Nitride As A Replacement Material For Beryllium X-Ray Windows, David B. Brough

Theses and Dissertations

The material properties of low stress silicon nitride make it a possible replacement material for beryllium in X-ray windows. In this study, X-ray windows made of LPCVD deposited low stress silicon nitride are fabricated and characterized. The Young's modulus of the LPCVD low stress silicon nitride are characterized and found to be 226±23 GPa. The residual stress is characterized using two different methods and is found to be 127±25 MPa and 141±0.28 MPa. Two support structure geometries for the low stress silicon nitride X-ray windows are used. X-ray windows with thicknesses of 100 nm and 200 nm are suspended on …

Thin Films Of Carbon Nanotubes And Nanotube/Polymer Composites, Anthony D. Willey

Theses and Dissertations

A method is described for ultrasonically spraying thin films of carbon nanotubes that have been suspended in organic solvents. Nanotubes were sonicated in N-Methyl-2-pyrrolidone or N-Cyclohexyl-2-pyrrolidone and then sprayed onto a heated substrate using an ultrasonic spray nozzle. The solvent quickly evaporated, leaving a thin film of randomly oriented nanotubes. Film thickness was controlled by the spray time and ranged between 200-500 nm, with RMS roughness of about 40 nm. Also described is a method for creating thin (300 nm) conductive freestanding nanotube/polymer composite films by infiltrating sprayed nanotube films with polyimide.

Comparing Theory And Experiment For Analyte Transport In The First Vacuum Stage Of The Inductively Coupled Plasma Mass Spectrometer, Matthew R. Zachreson

Theses and Dissertations

The Direct Simulation Monte Carlo algorithm as coded in FENIX is used to model the transport of trace ions in the first vacuum stage of the inductively coupled plasma mass spectrometer. Haibin Ma of the Farnsworth group at Brigham Young University measured two radial trace density profiles: one 0.7 mm upstream of the sampling cone and the other 10 mm downstream. We compare simulation results from FENIX with the experimental results. We find that gas dynamic convection and diffusion are unable to account for the experimentally-measured profile changes from upstream to downstream. Including discharge quenching and ambipolar electric fields, however, …

Modeling Radial Bernstein Modes In A Finite-Length Axisymmetric Non-Neutral Plasma, Mark Andrew Hutchison

Theses and Dissertations

Axisymmetric radial Bernstein modes are known to exist in non-neutral plasmas and have been studied theoretically and computationally in 1D, but detection of these modes has still proven to be difficult due to self-shielding. To help advance the work on this front we created a 2D particle-in-cell (PIC) code that simulates a non-neutral plasma in a Malmberg-Penning trap. A detailed description of the PIC code itself has been included that highlights the benefits of using an $r^2$--$z$ grid and how it can be tested. The focus of the PIC simulation was to discover how best to drive and detect these …

Advanced Numerical Methods In General Relativistic Magnetohydrodynamics, Michael J. Besselman

Theses and Dissertations

We show our work to refine the process of evolutions in general relativistic magnetohydrodynamics. We investigate several areas in order to improve the overall accuracy of our results. We test several versions of conversion methodologies between different sets of variables. We compare both single equation and two equations solvers to do the conversion. We find no significant improvement for multiple equation conversion solvers when compared to single equation solvers. We also investigate the construction of initial data and the conversion of coordinate systems between initial data code and evolution code. In addition to the conversion work, we have improved some …

Researching Effective Methods For Teaching The Phases Of The Moon, Heather Patti Jones

Theses and Dissertations

This study investigated the effectiveness of commonly used instructional methods for teaching the phases of the Moon to fifth and sixth grade students. The instructional methods investigated were the use of diagrams, animations, and models. The effectiveness of each method was tested by measuring students' understanding of Moon phases with a pre and post-assessment after receiving instruction with a specific method or combination of methods. These methods were then evaluated for their ability to help students learn essential concepts, reinforce relevant vocabulary and discourage misconceptions. Results showed that students had better scores with less prevalence of misconception when they were …

Investigation Of The Quaternary Structure Of An Abc Transporter In Living Cells Using Spectrally Resolved Resonance Energy Transfer, Deo R. Singh

Theses and Dissertations

Förster resonance energy transfer (FRET) has become an important tool to study proteins inside living cells. It has been used to explore membrane protein folding and dynamics, determine stoichiometry and geometry of protein complexes, and measure the distance between two molecules. In this dissertation, we use a method based on FRET and optical micro-spectroscopy (OptiMiS) technology, developed in our lab, to probe the structure of dynamic (as opposed to static) protein complexes in living cells. We use this method to determine the association stoichiometry and quaternary structure of an ABC transporter in living cells. Specifically, the transporter we investigate originates …

Structure And Chemistry Of Model Catalysts In Ultrahigh Vacuum, Joshua D. Walker

Theses and Dissertations

The study of catalysis is a key area of focus not only in the industrial sector but also in the nature and biological systems. The market for catalysis is a multi-billion dollar industry. Many of the materials and products we use on a daily basis are formed through a catalytic process. The quest to understanding and improving catalytic mechanisms is ongoing. Many model catalysts use transition metals as a support for chemical reactions to take place due to their selectivity and activity. Palladium, gold, and copper metals are studied in this work and show the ability to be catalytically reactive. …

Mapping Nuclear Fallout Using The Weather Research & Forecasting (Wrf) Model, Joseph C. Schofield

Theses and Dissertations

There are many models that attempt to predict transport & dispersion (T&D) of particulate matter in the sensible atmosphere. The majority of these existing models are unable to incorporate atmospheric processes such wet deposition through scavenging and cloud condensation nuclei (CCN) formation. To this end, the numerical weather prediction (NWP) model known as the Weather Research & Forecasting with Chemistry (WRF/Chem) Model is studied to determine its suitability as a potential tool for predicting particulate T&D following an atmospheric nuclear detonation. This is done by modifying relevant modules, originally designed to predict the settling of volcanic ash, such that a …

Nanoscale Surface Patterning And Applications: Using Top-Down Patterning Methods To Aid Bottom-Up Fabrication, Anthony Craig Pearson

Theses and Dissertations

Bottom-up self-assembly can be used to create structures with sub-20 nm feature sizes or materials with advanced electrical properties. Here I demonstrate processes to enable such self-assembling systems including block copolymers and DNA origami, to be integrated into nanoelectronic devices. Additionally, I present a method which utilizes the high stability and electrical conductivity of graphene, which is a material formed using a bottom-up growth process, to create archival data storage devices. Specifically, I show a technique using block copolymer micelle lithography to fabricate arrays of 5 nm gold nanoparticles, which are chemically modified with a single-stranded DNA molecule and used …

Curious Growth Of A Buried Sio2 Layer, Thomas O. Mcconkie

Theses and Dissertations

Initial investigation of Moxtek wire grid polarizers composed of Al and coated with SiO2 - SiX - SiO2 (where SiX is used to indicate a Si rich layer whose complete composition is not to be disclosed for proprietary reasons) showed a growth of 3x in the inner (closest to Al) SiO2 layer after baking. Upon removing the X and varying rib composition and layering composition and geometries in 12 sets of before and after samples, no obvious growth was observed. Even baking the original unbaked sample yielded no growth. Our data suggest that the initial conclusion of buried oxide growth …

Quantum Dynamics Using Lie Algebras, With Explorations In The Chaotic Behavior Of Oscillators, Ryan Thomas Sayer

Theses and Dissertations

We study the time evolution of driven quantum systems using analytic, algebraic, and numerical methods. First, we obtain analytic solutions for driven free and oscillator systems by shifting the coordinate and phase of the undriven wave function. We also factorize the quantum evolution operator using the generators of the Lie algebra comprising the Hamiltonian. We obtain coupled ODE's for the time evolution of the Lie algebra parameters. These parameters allow us to find physical properties of oscillator dynamics. In particular we find phase-space trajectories and transition probabilities. We then search for chaotic behavior in the Lie algebra parameters as a …

Optical Cryoimaging Of Celular Redox In Kidneys From Diabetic Mice, Sepideh Maleki

Theses and Dissertations

Diabetic Nephropathy (DN) is the major single cause of end stage renal diseases (ESRD) in the United States. Diabetes is the third leading fatal disorder after cancer and heart disease. It is affecting 8.3% of the residents of the United States, with a total healthcare cost of $174 billion/yr by 2010.

There currently exists a need for a sensitive and specific diagnosis for temporal detection of oxidative stress (OS) in cellular metabolic levels, which plays an early role in the development of DN. The objective of this research is to use a fluorescence optical imaging technique in order to delineate …

The Neutron-Star Equation Of State And Gravitational Waves From Compact Binaries, Benjamin David Lackey

Theses and Dissertations

The equation of state (EOS) of matter above nuclear density is currently uncertain by almost an order of magnitude. Fortunately, neutron stars (NS) provide an ideal laboratory for studying high density matter. In order to systematize the study of the EOS from NS observations, we introduce a parametrized high-density EOS that accurately fits theoretical candidate EOSs. We then determine the ability of several recent and near-future electromagnetic observations to constrain the parameter space of our EOS. Recent observations include measurements of masses, gravitational redshift, and spin period, and we find that high mass observations are the most useful at constraining …

Array-Based Characterization Of Military Jet Aircraft Noise, David William Krueger

Theses and Dissertations

Since the 1950s the jet aeroacoustics community has been involved in predicting and measuring the noise distribution in jets. In this work, cylindrical and planar Fourier near-field acoustical holography are used to investigate radiation from a full-scale, installed jet engine. Practical problems involving measurement aperture and the highly directional nature of the source are addressed. Insights from numerical simulations reveal usable reconstruction regions. A comparison of cylindrical and planar NAH for the respective measurement apertures shows cylindrical NAH outperforms planar NAH on reconstructions both towards and away from the source.

Analog Feedback Control Of Broadband Fan Noise, Cole Victor Duke

Theses and Dissertations

Active noise control (ANC) has been implemented using analog filters to reduce broadband noise from a small axial cooling fan. Previous work successfully attenuated narrow-band, tonal portions of the noise using a digital controller. The practical performance limits of this system were reached and it was desirable to attenuate the noise further. Additional research, therefore, sought to attenuate broadband noise from the fan using a digital controller, but performance was limited by the group delay inherent in the digital signal processor (DSP). Current research attempts to further attenuate broadband noise and improve performance of the system by combining the tonal …

Cross Hallway Detection And Indoor Localization Using Flash Laser Detection And Ranging, Istvan M. Prileszky

Theses and Dissertations

A flash LADAR is investigated as a source of navigation information to support cross-hallway detection and relative localization. To accomplish this, a dynamic, flexible simulation was developed that simulated the LADAR and the noise of a LADAR system. Using simulated LADAR data, algorithms were developed that were shown to be effective at detecting cross hallways in simulated ideal environments and in simulated environments with noise. Relative position was determined in the same situations. A SwissRanger SR4000 flash LADAR was then used to collect real data and to verify algorithm performance in real environments. Hallway detection was shown to be possible …

Implementation Of Branch-Point-Tolerant Wavefront Reconstructor For Strong Turbulence Compensation, Michael J. Steinbock

Theses and Dissertations

Branch points arise in optical transmissions due to strong atmospheric turbulence, long propagation paths, or a combination of both. Unfortunately, these conditions are very often present in desired operational scenarios for laser weapon systems, optical communication, and covert imaging, which suffer greatly when traditional adaptive optics systems either cannot sense branch points or implement non-optimal methods for sensing and correcting branch points. Previous research by Pellizzari presented a thorough analysis of various novel branch point tolerant reconstructors in the absence of noise. In this research a realistic model of the Air Force Institute of Technology's adaptive optics system is developed …

Calibration Of A Silver Detector Using A Pube Source, Melanie E. Mace

Theses and Dissertations

During the initial design of the Field Reversed Compression and Heating Experiment (FRCHX), magnetohydrodynamic simulations performed by Los Alamos National Laboratory using MACH2 predicted a neutron yield on the order of 10¹² neutrons. However, Air Force Research Laboratory (AFRL) measurements indicate a total of 10⁷-10⁸ neutrons are generated from the FRCHX. A PuBe source was used to create a burst of neutrons to calibrate an AFRL silver detector based on distance to determine if the four order of magnitude discrepancy was cause by an improperly calibrated detector. It was determined that the calibration equation in use …

Application Of An Imaging Fourier-Transform Spectrometer For The Means Of Combustion Diagnostics, Michael R. Rhoby

Theses and Dissertations

A passive remote sensing technique for accurately monitoring the combustion efficiency of petrochemical flares is greatly desired. A Phase II DOE-funded SBIR lead by Spectral Sciences, Inc. is underway to develop such a method. This paper presents an overview of the progress of AFIT's contribution. A Telops Hyper-Cam Mid-wave infrared imaging Fourier-transform spectrometer is used to examine a flame produced by a Hencken burner. Ethylene fuel was burned at four different equivalency ratios φ = 0:80; 0:91; 1:0 and 1:25. Presented is qualitative spectrally-resolved visualization of a Hencken burner flame and the spatial distribution of combustion by-products. The flame spectra …

Active Noise Control Of A Centrifugal Fan Mounted In A Mock Laptop Enclosure, John J. Esplin

Theses and Dissertations

Noise from information technology (IT) equipment is a significant problem in today's modern society. Active Noise Control (ANC) has shown promise in reducing the effect of IT fan noise on users. Though ANC has been applied to axial fans (such as those found in desktop computers), it has not been applied to centrifugal fans, such as those found in laptop computers. This work applies an ANC method to a centrifugal fan mounted in a mock laptop enclosure. This method is applied in four steps. First, secondary sources are placed in the vicinity of the fan. Second, an accurate model of …

Photoluminescence From Bulk Gan Substrates, Marrwa Alrrshedan

Theses and Dissertations

Photoluminescence (PL) has been studied from different types of bulk GaN samples grown by hydride vapor phase epitaxy technique at Kyma Technologies. Point defects in bulk and at the surface affect the electrical and optical properties of GaN and could be analyzed by PL. The surface of the samples was polished with different techniques: one is chemical mechanical polish (CMP) and another is mechanical polish (MP). PL data from MP and CMP surfaces show that PL intensity from the CMP-treated surface is much higher than that from the MP-treated surface. This can be explained by defects formed during the process …

Preferentially Orienting Ag Nanoparticles Using Caf2 Nanorods, Mathias Auer

Theses and Dissertations

A study was done to examine the effect of surface orientation as well as heterogeneous epitaxy at an interface between two materials with a large lattice mismatch. Silver nanoparticles of different diameters were grown in an effort to study methods of preferentially orienting the geometry of metal nanoparticles. Arrays of calcium fluoride nanorods were grown on silicon substrates using oblique angle thermal vapor deposition. The chamber operated at an ultra high vacuum pressure of 10^-10 Torr during the deposition of the rods and an oblique angle of 75° was kept between the silicon substrate normal and the direction of incident …

Finite-Difference Time-Domain Modeling Of Nickel Nanorods, Joseph Steele Parris

Theses and Dissertations

Theoretical and experimental plasmonics is a growing field as a method to create near fields at sub-wavelength distances. In this thesis, a finite-difference time-domain method is used to simulate electromagnetic waves onto a thin film that present of nickel nanorods with sharp apexes. The absorbed, transmitted, and reflected fields were shown to depend linearly on silver film thickness and nanotip length. The electric field is visualized along the tip to show strong charge density along the base of the tip’s apex and how that density changes for wavelength, metal, and source tilt. Lastly, the study shows gold film on the …

Mechanical Characterization Of Patterned Silver Columnar Nanorods With The Atomic Force Microscope., Sean Kenny

Theses and Dissertations

Patterned silver (Ag) columnar nanorods were prepared by the glancing angle physical vapor deposition method. The Ag columnar nanorods were grown on a Si (100) substrate patterned with posts in a square “lattice” of length 1 μm. An electron beam source was used as the evaporation method, creating the deposition flux which was oriented 85˚ from the substrate normal. A Dimension Icon with NanoScope V controller atomic force microscope was used to measure the spring constant in 10 nm increments along the long axis of five 670 nm long Ag nanorod specimens. The simple beam bending model was used to …

Fabrication Of Anisotropic Sol-Gel Materials By Photo-Crosslinking, Charles Wingfield

Theses and Dissertations

This is a report on the fabrication and characterization of anisotropic, porous materials: functionally graded cellular and compositionally anisotropic aerogels. This new class of materials was fabricated by photopolymerization of selected regions of a homogeneous monolith using visible light. Visible light is not significantly absorbed and not significantly scattered by organic molecules and oxide nanoparticles in wet gels and it allows fabrication of deeply penetrating, well-resolved patterns. Simple variations of the exposure geometry allowed fabrication of a wide variety of anisotropic materials without requiring layers or bonding.

Thermal Quenching Of Photoluminescence From Gan, Anita Olsen

Theses and Dissertations

GaN is a III-V semiconductor that is a promising material used in production of light emitting devices and high power/high frequency electronics. The electronic and optical properties of GaN are subdued by defects that occur during the growth processes of this material. The emitted photoluminescence (PL) from optically excited GaN gives insight into the origins and effects of point defects within the crystal lattice structure of GaN. In this study, PL spectroscopy is used to examine and analyze the point defects that occur in Zn-doped GaN. The blue luminescence band seen in undoped and Zn-doped GaN have identical fine structure …

Comparative Statistical Analysis Of Auroral Models, Cory T. Lane

Theses and Dissertations

The location of the equatorward boundary of the auroral oval provides an appropriate means to measure the accuracy of auroral models. In this study, the equatorward boundary is represented by the location at which the energy flux data measured by DMSP satellites exceeds 0.4 erg/cm²/s. The MLAT coordinates obtained from more than 4,000 orbits through the polar region of the Northern Hemisphere comprise the data set used to compare to the outputs of five auroral models. These models are: the original Hardy auroral model of 1985 (OH), the OVATION Prime model (OP), the 2008 adaptation to the Hardy …