Physics Commons^™

Modelling Hoe Performance With An Extended Source; Experimental Investigation Using Misaligned Point Sources, Jorge Lasarte, Kevin Murphy, Izabela Naydenova, Maria Victoria Collados, Jesús Atencia, Suzanne Martin

Articles

Holographic optical elements (HOEs) have the potential to enable more compact, versatile, and lightweight optical designs, but many challenges remain. Volume HOEs have the advantage of high diffraction efficiency, but they present both chromatic selectivity and chromatic dispersion, which impact their use with wide spectrum light sources. Single-color light emitting diode (LED) sources have a narrow spectrum that reduces these issues and this makes them better suited for use with volume HOEs. However, the LED source size must be taken into consideration for compact volume HOE-LED systems. To investigate the design limits for compact HOE-LED systems, a theoretical and experimental …

Development Of An Optical Test Bed For The Fabrication And Characterisation Of An Analog Holographic Wavefront Sensor, Emma Branigan, Andreas Zepp, Suzanne Martin, Matthew Sheehan, Szymon Gladysz, Kevin Murphy

Conference Papers

A new holographic recording setup has been developed for the fabrication of single- and multi-mode photopolymer-based analog holographic wavefront sensors. A second setup has been built and used to characterise the sensor at several wavelengths.

Optical Characterisation Of Holographic Diffusers And Bangerter Foils For Treatment Of Amblyopia, Matthew Hellis, Suzanne Martin, Matthew Sheehan, Kevin Murphy

Articles

Amblyopia is a significant issue for children worldwide, and current treatment methods have drawbacks that can hinder treatment effectiveness and/or patient experience. This study proposes a new treatment method using holographic diffusers while also comparing their optical characteristics to a current treatment method (Bangerter foils). Holographic diffusers were developed by optically patterning thin polymer layers on a micron scale. Two compositions of photopolymer (acrylamide and diacetone acrylamide based) are analysed herein. Characterisation shows that holographic diffusers of either composition can achieve a wide range of on-axis intensity reductions, allowing for precise and customisable treatment levels by altering recording exposure time …

Modelling Hoe Performance With An Extended Source; Experimental Investigation Using Misaligned Point Sources, Jorge Lasarte, Kevin Murphy, Izabela Naydenova, Jesús Atencia, Mª Victoria Collados, Suzanne Martin

Conference Papers

Holographic Optical Elements (HOEs) have the potential to enable more compact, versatile and lightweight optical designs, but many challenges remain. Volume HOE’s have the advantage of high diffraction efficiency but they present both chromatic selectivity and chromatic dispersion which impact on their use with wide spectrum light sources. Single-colour LED sources have a narrow spectrum that reduces these issues and this makes them better suited for use with volume HOEs. However, the LED source size must be taken into consideration for compact volume HOE-LED systems. To investigate the design limits for compact HOE-LED systems, a theoretical and experimental study was …

Fabrication And Characterisation Of Large Area, Uniform And Controllable Surface Relief Patterns In Photopolymer Material, Owen Kearney, Izabela Naydenova

Conference Papers

As the risk of antibiotic resistant pathogens increases, development of convenient point of care devices is essential. Such devices would help avoid infection – ensure cleanliness of environments and assist in bacteria analysis. The ultimate aim of the research presented here is to develop a compact, cost effective, easy to use optical device which is capable of detecting and quantifying bacteria in an aqueous sample. The surface relief patterns have a dual role, they provide a diffracted light signal, and control the adhesion of the bacteria to the surface. The strength of the diffracted signal is expected to provide a …

Color-Changing Reflection Hologram For Quality Assurance Of Therapeutic Ultrasound Systems, Tatsiana Mikulchyk, John Walsh, Jacinta Browne, Izabela Naydenova, Dervil Cody

Articles

The acoustic output of clinical therapeutic ultrasound equipment requires regular quality assurance (QA) testing to ensure the safety and efficacy of the treatment and that any potentially harmful deviations from the expected output power density are detected as soon as possible. A hologram, consisting of a reflection grating fabricated in an acrylate photopolymer film, has been developed to produce an immediate, visible, and permanent change in the color of the reconstructed hologram from red to green in response to incident ultrasound energy. The influence of the therapeutic ultrasound insonation parameters (exposure time, ultrasound power density, and proximity to the point …

Design And Fabrication Of Volume Holographic Optical Couplers For A Range Of Non-Normal Incidence Angles, Dipanjan Chakraborty, Rosen Georgiev, Sinead Aspell, Izabela Naydenova, Suzanne Martin

Conference Papers

A theoretical model has previously been developed to calculate the holographic recording beam angles required in air (at any recording wavelength) to produce a Volume Holographic Optical Element (VHOE) for operation as a coupler for different input and output angles. In this paper, the experimental study is extended to further validate the VHOE coupler design and fabrication approach for additional incident beam angles, comparing -40° -45° and -50° (in air). The output angle for each VHOE is +45° within the medium and the coupler operational wavelength is 633nm. Holographic recording in Bayfol HX 200 photopolymer at 532nm is used to …

Oil Particle Analysis Using Machine Learning And Holography Imaging, Daniel Cruz

Open Access Theses & Dissertations

Holographic cameras show potential as a sensor to monitor oil spills. Holographic cameras record the light interference from particles in a volume of space, producing an image called a hologram. Processing these holograms is known as hologram reconstruction. It produces a representation of particles located in three-dimensional space. These cameras can record precise shapes and sizes of particles in a volume of water. However, it is very time-consuming and resource-intensive to process the images. Most algorithms that perform particle analysis require the hologram reconstruction step. The well-documented hybrid method is one such algorithm. Machine learning is one possible technique that …

Modelling Spherical Aberration Detection In An Analog Holographic Wavefront Sensor, Emma Branigan, Suzanne Martin, Matthew Sheehan, Kevin Murphy

Conference Papers

The analog holographic wavefront sensor (AHWFS) is a simple and robust solution to wavefront sensing in turbulent environments. Here, the ability of a photopolymer based AHWFS to detect refractively generated spherical aberration is modelled and verified.

Dynamic Holography In Resonant Nonlinear Media: Theory And Application, Jonathan E. Slagle

Theses and Dissertations

Two beam coupling (TBC) is a coherent interaction in which energy is transferred from one laser beam to another and has promising applications in real-time holography and coherent beam combing. We have recently shown efficient degenerate frequency TBC for counter-propagation geometries in isotropic two-photon absorbing media pumped with a nanosecond pulsed laser. When an interference pattern is generated in this media, single and two photon absorption initiates a population redistribution resulting in a holographic grating with the same modulation period and phase initially. However, due to temporal convolution of self- and cross-phase modulation, the grating will begin to shift in …

Direct Multiplexing Of Low Order Aberration Modes In A Photopolymerbased Holographic Element For Analog Holographic Wavefront Sensing, Emma Branigan, Suzanne Martin, Matthew Sheehan, Kevin Murphy

Conference Papers

The fabrication of an analog holographic wavefront sensor, capable of detecting the low order defocus aberration, was achieved in an acrylamide-based photopolymer. While other implementations of holographic wavefront sensors have been carried out digitally, this process utilises a recording setup consisting only of conventional refractive elements so the cost and complexity of holographic optical element (HOE) production could be much reduced. A pair of diffraction spots, corresponding to a maximum and minimum amount of defocus, were spatially separated in the detector plane by multiplexing two HOEs with different carrier spatial frequencies. For each wavefront with a known aberration that was …

Characterization Of A Digital Holography Diagnostic For In Situ Erosion Measurement Of Plasma-Facing Components In Fusion Devices, Cary Dean Smith

Doctoral Dissertations

Fusion energy devices, particularly tokamaks, face the challenge of interior surface damage occurring over time from the heat flux of the high-energy plasma they generate. The ability to monitor the rate of surface modification is therefore imperative, but to date no proven technique exists for real-time erosion measurement of planar regions of interest on plasma-facing components in fusion devices. In order to fill this diagnostic gap, a digital holography system has been established at ORNL [Oak Ridge National Laboratory] for the purpose of measuring the erosion effects of plasma-material interaction in situ.

The diagnostic has been designed with the …

Structuring Light For Investigating Optical Vortices, Andrew Voitiv, Mark Siemens

DU Undergraduate Research Journal Archive

Vortices are well known in our world: tornadoes, hurricanes, and quickly stirred iced tea all demonstrate the vortex phenomenon. In addition to these classical fluids, vortices exist in laser light. While classical fluid vortex dynamics is one of the oldest studied physics problems, the study of optical vortices is only a few decades old. Paralleling the community’s curiosity of quantized vortices in quantum fluids, such as super fluid helium and Bose-Einstein condensate, there is immense interest in the study of optical vortices. In this article, we cover the basic theory of structuring light to generate optical vortices and then discuss …

Holographic Security, Vincent Toal

Books/Book Chapters

This chapter is concerned with the security applications of holographic techniques. Holograms are used in product authentication, product branding and brand protection, and personal and other documents. Serialization to ensure the uniqueness of each hologram for added security is briefly discussed. The theory of optical character recognition and joint transform correlation methods is outlined. Holographic recording using encrypted reference waves enables secure storage of information. Several methods are considered for encrypting optical data as well as holographic recording of encrypted images and their reconstruction and decryption. Millimeter and microwave holographic imaging techniques for the detection of hidden contraband, narcotics, firearms, …

Optimisation Of The Performance Of Holographic Beam-Shaping Diffractive Diffusers Through Refinement Of The Recording Process, Cara Jones, Suzanne Martin, Sanjay Keshri, Dervil Cody, Kevin Murphy

Conference Papers

Optical diffusers have uses in laser applications and machine vision. Typical fabrication at a commercial level requires master production and the stamping/copying of individual elements at scale. This expensive, indirect process inhibits custom diffusers at reasonable cost. Previously the authors published a novel, direct, single beam method of recording customizable and controllable volume holographic diffusers by manipulating laser speckle and recording the pattern in photopolymer. This method allows for beam-shaping to produce diffusion patterns of various sizes and shapes. In this work, the direct method of recording controllable holographic diffusers is refined to improve diffuser performance (i.e., a decrease in …

An Echo Of Light, Anaka Marie Wetch

Senior Projects Spring 2020

My senior project film an Echo of Light is an experimental 16mm film exploring light as both a metaphysical and physical process. I became interested in light during my studies in holography, which is a medium revolving around the interference of light. I studied holography independently and with the guidance of professionals in the field. My holographic work is oriented around the natural world and its micro-constituents. I examined and photographed substances, such as salt, pyrite, and quartz with the scanning electron microscope at Bard. These materials have striking crystalline geometry which I intend to explore through the light dependent …

Measuring And Utilizing High-Dimensional Information Of Optical Fields, Ziyi Zhu

USF Tampa Graduate Theses and Dissertations

Currently, many areas of optical techniques including imaging, inspection and communication emphasize the utilization of the high-dimensional information encoded in optical fields. There is also a requirement for novel measurement techniques to extract this high-dimensional information with high-speed and accuracy. We firstly introduce a scan-free direct measurement technique that is capable of simultaneously characterizing the amplitude and phase of a coherent scalar optical field. Our direct measurement approach is constituted of a weak polarization perturbation which is followed by the recording of a polarization-resolving imaging process. The weak perturbation rotates the linear polarization on the spatial frequency domain of the …

Development Of Photopolymer Material With Improved Dynamic Range And Sensitivity, Brian Rogers, Izabela Naydenova, Suzanne Martin

Conference Papers

In this study the effect of the concentration of acrylamide and the influence of different initiators in a photopolymer composition for holographic recording of diffraction gratings is investigated. Light manipulating Holographic Optical Elements (HOEs) have a number of characteristics which can be optimised for different roles. However, at the core of these devices is the refractive index modulation that has been created in the material during recording. Typically higher refractive index modulation will enable greater diffraction efficiency. Solar concentrating HOEs can particularly benefit from material that experiences higher refractive index modulation. For a solar concentrator to have a high acceptance …

Study Of The Effect Of Magnetic Nanoparticles On The Hologram Recording Capability Of Photopolymer Nanocomposite For Development Of Holographic Sensor/Actuator, Muhammad Irfan, Suzanne Martin, Izabela Naydenova

Conference Papers

Photopolymer nanocomposite materials utilising nanoparticles of varied refractive index are one of the most attractive materials for holography due to their tuneable properties. The preparation of the photopolymer nanocomposites can involve mixing a stable colloidal suspension in the photopolymer solution or printing of the nanoparticle colloidal suspension on top of a dried photopolymer layer. By following the first approach in this study a novel photopolymer nanocomposite material is prepared for holographic recording. It consists of N-isopropylacrylamide (NIPA)-based photopolymer as a host and iron oxide magnetic nanoparticles as nanodopant. The methodology of the photopolymer nanocomposite material preparation is explained in detail. …

Developing Wavefront Shaping Techniques For Focusing Through Highly Dynamic Scattering Media, Ashton Hemphill

McKelvey School of Engineering Theses & Dissertations

One of the prime limiting factors of optical imaging in biological applications is the diffusion of light by tissue, which prevents focusing at depths greater than the optical diffusion limit of ~1 mm in soft tissue. This greatly restricts the utility of optical diagnostic and therapeutic techniques, such as optogenetics, microsurgery, optical tweezing, and phototherapy of deep tissue, which require focused light in order to function. Wavefront shaping extends the depth at which optical focusing may be achieved by compensating for phase distortions induced by scattering, allowing for focusing through constructive interference.

However, due to physiological motion, scattering of light …

Holographic Beam-Shaping Diffractive Diffusers Fabricated By Using Controlled Laser Speckle, Kevin Murphy, Vincent Toal, Izabela Naydenova, Suzanne Martin

Articles

A method for fabricating diffractive holographic optical diffusers is reported, allowing a high degree of control of the resulting diffuser characteristics. The method consists of recording a laser speckle pattern using a single carrier beam, with controlled speckle size and shape, in an acrylamide-based volume photopolymer. The multiple interferences that create the speckle pattern form the hologram. Results are presented verifying the diffusers are volume holographic in nature and the speckle pattern is recorded accurately in the photopolymer. Diffusers recorded by this method are analysed to characterise the optical performance of the diffusers and to illustrate their beam-shaping capabilities, particularly …

N-Isopropylacrylamide-Based Photopolymer For Holographic Recording Of Thermosensitive Transmission And Reflection Grating, Tatsiana Mikulchyk, Suzanne Martin, Izabela Naydenova

Articles

In recent years, functionalized photopolymer systems capable of holographic recording are in great demand due to their potential use in the development of holographic sensors. This work presents a newly developed Nisopropylacrylamide(NIPA)-based photopolymer for holographic recording in reflection and transmission modes. The optimized composition of the material is found to reach refractive index modulation of up to 5  10-3 and 1.6  10-3 after recording in transmission and reflection mode, respectively. In addition to fulfilling the requirements for holographic recording materials, the NIPA-based photopolymer is sensitive to temperature and has lower toxicity than acrylamide-based photopolymers. Possible application of the …

Effect Of Monomer Diffusion On Photoinduced Shrinkage In Photopolymer Layers Determined By Electronic Speckle Pattern Interferometry, Mohesh Moothanchery, Manojit Pramanik, Vincent Toal, Izabela Naydenova

Conference Papers

The aim of this study is to determine the effect of monomer diffusion on the photoinduced shrinkage profile in acrylamide based photopolymer layers during holographic recording. Using phase shifting electronic speckle pattern interferometry the displacement at each pixel in the image of the layer is measured. The complete displacement profile of the layer was obtained using phase shifting technique. We observed a reduction in shrinkage as a result of monomer diffusion from unexposed regions of holographic exposure. As a result of diffusion the maximum shrinkage was reduced by 26 % from 7.18μm to 5.28μm in a photopolymer layer of thickness160 …

Quantitative Measurement Of Displacement In Photopolymer Layers During Holographic Recording Using Phase Shifting Electronic Speckle Pattern Interferometry, Mohesh Moothanchery, Viswanath Bavigadda, Paul Kumar Upputturi, Manojit Pramanik, Vincent Toal, Izabela Naydenova

Conference Papers

The aim of this study is to determine the displacement profile due to shrinkage in acrylamide-based photopolymer layer during holographic recording. Using phase shifting electronic speckle pattern interferometry the displacement at each pixel in the image of the object is measured by phase shifting technique so that a complete displacement profile of the object can be obtained. It was observed that the displacement profile is Gaussian and resembles to the profile of the recording beam. We observed an increase in shrinkage from 2 μm at 20 seconds of recording to 7.5 μm after 120 seconds of recording. The technique allows …

Real-Time Optical Holography Using A Spatial Light Modulator, Ting-Chung Poon, Bradley Duncan, Ming Hsien Wu, K. Shinoda, Y. Suzuki

Bradley D. Duncan

Paper proposes a real-time technique for recording and reconstructing optical holograms. Holographic recording is accomplished by scanning an object with two superposed light beams of different temporal frequencies. For reconstruction, the scanned information is transferred to an electron beam addressed spatial light modulator for coherent processing and optically read out to reconstruct an image of the scanned object.

Diffractive Optical Elements With A Large Angle Of Operation Recorded In Acrylamide Based Photopolymer On Flexible Substrates, Hoda Akbari, Izabela Naydenova, Lina Persechini, Sean Garner, Pat Cimo, Suzanne Martin

Articles

A holographic device characterised by a large angular range of operation is under development. The aim of this study is to increase the angular working range of the diffractive lens by stacking three layers of high efficiency optical elements on top of each other so that light is collected (and focussed) from a broader range of angles. The angular range of each individual lens element is important, and work has already been done in an acrylamide-based photosensitive polymer to broaden the angular range of individual elements using holographic recording at a low spatial frequency.This paper reports new results on the …

Using Acrylamide Based Photopolymers For Fabrication Of Holographic Optical Elements In Solar Energy Applications, Hoda Akbari, Izabela Naydenova, Suzanne Martin

Articles

A holographic device is under development that aims to improve light collection in solar cells. The aim is to explore the potential of using photopolymer Holographic Optical Elements (HOE) to collect light from a moving source, such as the sun, and re-direct it for concentration by a holographic lens.. A working range of 45 degrees is targeted for such a device to be useful in solar applications without tracking. A photopolymer HOE is capable of efficiently re-directing light, but the angular selectivity of a single grating is usually of the order of one degree at the thicknesses required for high …

Holographic Recording And Applications Of Multiplexed Volume Bragg Gratings In Photo-Thermo-Refractive Glass, Daniel Ott

Electronic Theses and Dissertations

Recent developments in holographic recording of volume Bragg gratings (VBGs) in photo-thermo-refractive (PTR) glass have demonstrated their utility as components in high power laser systems for spectral narrowing, transverse mode control, beam combining, and pulse stretching/compression. VBG structures are capable of diffracting incident light into a single diffraction order with high efficiency given the Bragg condition is met. The Bragg condition depends on both the wavelength and angle of the incident light making VBGs useful for filtering and manipulating both the wavelength and angular spectrum of a source. This dissertation expands upon previous research in PTR VBGs by investigating multiplexed …

Holographic Sensors: Three-Dimensional Analyte-Sensitive Nanostructures And Their Applications, Ali K. Yetisen, Izabela Naydenova, Fernando Da Cruz Vasconcellos, Jeffrey Blyth, Christopher R. R. Lowe

Articles

Holographic sensors are analytical devices that systematically diffract narrow-band light in the ultraviolet to near-infrared range for application in the detection and quantification of analytes and/or physical parameters. They can be functionalized with analyte-responsive materials to construct highly sensitive optical sensors for use in testing, where a visual readout, fast turnaround time, and reversibility are needed. Holography allows fabrication of disposable sensors that are lightweight for miniaturization and multiplexing purposes.3 Holographic sensors offer three capabilities on a single analytical device: (i) label-free analyte-responsive polymer, (ii) real-time, reversible quantification of the external stimuli, and (iii) three-dimensional visual image display.

Design And Study Of Acrylamide-Based Photopolymer Holographic Optical Elements For Solar Application, Hoda Akbari, Izabela Naydenova, Manus Kennedy, John Doran, Suzanne Martin

Conference Papers

Abstract: Solar concentrators can be used to reduce the cost of photovoltaic electrical power generation by collecting incident solar radiation from a given aperture area and transmitting the energy to a reduced area. In doing so, the overall cost of power (Wp) can be reduced as less area of photovoltaic is required. This paper will discuss Holographic Solar Concentrators fabricated in an acrylamide photopolymer , describing the optical recording process and showing how the fabricated HOE’s can be used in solar concentrator devices. Preliminary lifetime studies are also discussed.