Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Cavity (53)
- Electron (31)
- SRF (27)
- Niobium (22)
- HOM (19)
-
- Gun (14)
- Luminosity (14)
- Simulation (14)
- Particle accelerators (13)
- Cathode (11)
- Damping (11)
- Experiment (11)
- Laser (11)
- Dipole (10)
- Superconducting cavities (10)
- Emittance (9)
- Cavities (8)
- Geometry (8)
- Solenoid (8)
- Superconducting RF (8)
- Superconductivity (8)
- Accelerators (7)
- Impedance (7)
- Cavity design (6)
- Collider (6)
- Magnetic fields (6)
- Multipacting (6)
- Beam dynamics (5)
- Crabbing (5)
- Cryogenics (5)
Articles 1 - 30 of 210
Full-Text Articles in Physics
Magneto-Thermal Limitations In Superconducting Cavities At High Radio-Frequency Fields, I. Parajuli, G. Ciovati, A. Gurevich
Magneto-Thermal Limitations In Superconducting Cavities At High Radio-Frequency Fields, I. Parajuli, G. Ciovati, A. Gurevich
Physics Faculty Publications
The performance of superconducting radio-frequency Nb cavities at high radio-frequency (rf) fields in the absence of field emission can be limited by either a sharp decrease of the quality factor Q0(Bp) above peak surface magnetic fields Bp ∼100 mT or by a quench. We have measured Q0(Bp) at 2 K of several 1.3 GHz single-cell Nb cavities with different grain sizes, and with different ambient magnetic fields and cooldown rates below the critical temperature. Temperature mapping and a novel magnetic field mapping systems were used to find the location of “hot-spots” …
Generation And Characterization Of Magnetized Electron Beam From A Dc High Voltage Photogun For Electron Beam Cooling Application, S.A.K. Wijethunga, M. A. Mamun, R. Suleiman, P. Adderley, B. Bullard, J. Benesch, Jean R. Delayen, J. Grames, C. Hernandez-Garcia, F. Hannon, Geoffrey A. Krafft, G. Palacios-Serrano, M. Poelker, M. Stefani, Y. Wang, S. Zhang
Generation And Characterization Of Magnetized Electron Beam From A Dc High Voltage Photogun For Electron Beam Cooling Application, S.A.K. Wijethunga, M. A. Mamun, R. Suleiman, P. Adderley, B. Bullard, J. Benesch, Jean R. Delayen, J. Grames, C. Hernandez-Garcia, F. Hannon, Geoffrey A. Krafft, G. Palacios-Serrano, M. Poelker, M. Stefani, Y. Wang, S. Zhang
Physics Faculty Publications
One of the most challenging requirements for the proposed Electron–Ion Collider is the strong cooling of the proton beam, which is key to achieving the collider’s desired luminosity of order 1033–1034cm−2s−1. Magnetized bunched-beam electron cooling could be a means to achieve the required high luminosity, where strong cooling is accomplished inside a cooling solenoid where the ions co-propagate with an electron beam generated from a source immersed in a magnetic field. To increase the cooling efficiency, a bunched electron beam with high bunch charge and high repetition rate is required. This work …
Characterization Of Dissipative Regions Of A N-Doped Superconducting Radio-Frequency Cavity, Eric M. Lechner, Basu Dev Oli, Junki Makita, Gianluigi Ciovati, Alex Gurevich, Maria Lavarone
Characterization Of Dissipative Regions Of A N-Doped Superconducting Radio-Frequency Cavity, Eric M. Lechner, Basu Dev Oli, Junki Makita, Gianluigi Ciovati, Alex Gurevich, Maria Lavarone
Physics Faculty Publications
We report radio-frequency measurements of quality factors and temperature mapping of a nitrogen doped Nb superconducting RF cavity. Cavity cutouts of hot and cold spots were studied with low temperature scanning tunneling microscopy and spectroscopy, X-ray photoelectron spectroscopy and secondary electron microscopy. Temperature mapping revealed a substantial reduction of the residual resistance upon cooling the cavity with a greater temperature gradient and hysteretic losses at the quench location, pointing to trapped vortices as the dominant source of residual surface resistance.Analysis of the tunneling spectra in the framework of a proximity effect theory shows that hot spots have a reduced pair …
Temperature, Rf Field, And Frequency Dependence Performance Evaluation Of Superconducting Niobium Half-Wave Coaxial Cavity, N. K. Raut, G. Ciovati, S. U. De Silva, J. R. Delayen, P. Dhakal, B. D. Khanal, J. K. Tiskumara
Temperature, Rf Field, And Frequency Dependence Performance Evaluation Of Superconducting Niobium Half-Wave Coaxial Cavity, N. K. Raut, G. Ciovati, S. U. De Silva, J. R. Delayen, P. Dhakal, B. D. Khanal, J. K. Tiskumara
Physics Faculty Publications
Recent advancement in superconducting radio frequency cavity processing techniques, with diffusion of impurities within the RF penetration depth, resulted in high quality factor with increase in quality factor with increasing accelerating gradient. The increase in quality factor is the result of a decrease in the surface resistance as a result of nonmagnetic impurities doping and change in electronic density of states. The fundamental understanding of the dependence of surface resistance on frequency and surface preparation is still an active area of research. Here, we present the result of RF measurements of the TEM modes in a coaxial half-wave niobium cavity …
Crab Cavities For Ilc, P. A. Mcintosh, S. A. Belomestnykh, G. Burt, R. Calaga, S. U. De Silva, J. R. Delayen, I. V. Gonin, T. N. Khabiboulline, A. Lunin, T. Okugi, Y. M. Orlov, S. Verdú-Andrés, B. P. Xiao, V. P. Yakovlev, A. Yamamoto
Crab Cavities For Ilc, P. A. Mcintosh, S. A. Belomestnykh, G. Burt, R. Calaga, S. U. De Silva, J. R. Delayen, I. V. Gonin, T. N. Khabiboulline, A. Lunin, T. Okugi, Y. M. Orlov, S. Verdú-Andrés, B. P. Xiao, V. P. Yakovlev, A. Yamamoto
Physics Faculty Publications
For the 14 mrad crossing angle proposed, crab cavity systems are fundamentally anticipated for the viable operation of the International Linear Collider (ILC), in order to maximise its luminosity performance. Since 2021, a specialist development team have been defining optimum crab cavity technologies which can fulfil the operational requirements for ILC, both for its baseline centre-of-mass energy of 250 GeV, but also extending those requirements out to higher beam collision intensities. Five design teams have established crab cavity technology solutions, which have the capability to also operate up to 1 TeV centre-of-mass. This presentation showcases the key performance capabilities of …
Scattered Spectra From Inverse Compton Sources Operating At High Laser Fields And High Electron Energies, Geoffrey A. Krafft, Balša Terzić, Erik Johnson, G. Wilson
Scattered Spectra From Inverse Compton Sources Operating At High Laser Fields And High Electron Energies, Geoffrey A. Krafft, Balša Terzić, Erik Johnson, G. Wilson
Physics Faculty Publications
As Compton x-ray and gamma-ray sources become more prevalent, to understand their performance in a precise way, it becomes important to be able to compute the distribution of scattered photons precisely. For example, codes have been developed at Old Dominion University which were used to understand the performance of the Dresden Compton Source in detail. An ideal model would (i) include the full Compton effect frequency relations between incident and scattered photons, (ii) allow the field strength to be large enough that nonlinear effects are captured, and (iii) allow the effects of electron beam emittance to be introduced and studied. …
Cavity And Cryomodule Developments For Eic, R. A. Rimmer, E. Daly, J. Guo, J. Henry, J. Matalevich, H. Wang, S. Wang, D. Holmes, K. Smith, W. Xu, A. Zaltsman, B. Xiao, Subashini De Silva, Jean R. Delayen
Cavity And Cryomodule Developments For Eic, R. A. Rimmer, E. Daly, J. Guo, J. Henry, J. Matalevich, H. Wang, S. Wang, D. Holmes, K. Smith, W. Xu, A. Zaltsman, B. Xiao, Subashini De Silva, Jean R. Delayen
Physics Faculty Publications
The EIC is a major new project under construction at BNL in partnership with JLab. It relies upon a number of new SRF cavities at 197 MHz, 394 MHz, 591 MHz and 1773 MHz to pre-bunch, accelerate, cool and crab the stored beams. R&D is focusing on the 591 MHz elliptical cavity and 197 MHz crab cavity first as these are the most challenging. Preliminary designs of these cavities are presented along with an R&D status report. To avoid developing multiple different cryostats a modular approach is adopted using a high degree of commonality of parts and systems. This approach …
Quantum Efficiency Enhancement In Simulated Nanostructured Negative Electron Affinity Gaas Photocathodes, Md Aziz Ar Rahman, Shukui Zhang, Hani E. Elsayed-Ali
Quantum Efficiency Enhancement In Simulated Nanostructured Negative Electron Affinity Gaas Photocathodes, Md Aziz Ar Rahman, Shukui Zhang, Hani E. Elsayed-Ali
Physics Faculty Publications
Nanostructured negative electron affinity GaAs photocathodes for a polarized electron source are studied using finite difference time domain optical simulation. The structures studied are nanosquare columns, truncated nanocones, and truncated nanopyramids. Mie-type resonances in the 700–800 nm waveband, suitable for generation of polarized electrons, are identified. At resonance wavelengths, the nanostructures can absorb up to 99% of the incident light. For nanosquare columns and truncated nanocones, the maximum quantum efficiency (QE) at 780 nm obtained from simulation is 27%, whereas for simulated nanopyramids, the QE is ∼21%. The high photocathode quantum efficiency is due to the shift of Mie resonance …
Development Of A Prototype Superconducting Radio-Frequency Cavity For Conduction Cooled Accelerators, Gianluigi Ciovati, J. Anderson, S. Balachandran, G. Cheng, B. Coritron, E. Daly, P. Dhakal, Alex Gurevich, F. Hannon, K. Harding, L. Holland, F. Marhauser, K. Mclaughlin, D. Packard, T. Powers, U. Pudasaini, J. Rathke, R. Rimmer, T. Schultheiss, H. Vennekate, D. Vollmer
Development Of A Prototype Superconducting Radio-Frequency Cavity For Conduction Cooled Accelerators, Gianluigi Ciovati, J. Anderson, S. Balachandran, G. Cheng, B. Coritron, E. Daly, P. Dhakal, Alex Gurevich, F. Hannon, K. Harding, L. Holland, F. Marhauser, K. Mclaughlin, D. Packard, T. Powers, U. Pudasaini, J. Rathke, R. Rimmer, T. Schultheiss, H. Vennekate, D. Vollmer
Physics Faculty Publications
The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal -conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb3Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of 1-10 MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such …
Surface Properties And Rf Performance Of Vapor Diffused Nb₃Sn On Nb After Sequential Anneals Below 1000 °C, Jayendrika K. Tiskumara, Jean R. Delayen, U. Pudasaini, G. Eremeev
Surface Properties And Rf Performance Of Vapor Diffused Nb₃Sn On Nb After Sequential Anneals Below 1000 °C, Jayendrika K. Tiskumara, Jean R. Delayen, U. Pudasaini, G. Eremeev
Physics Faculty Publications
Nb₃Sn is a next-generation superconducting material that can be used for future superconducting radiofrequency (SRF) accelerator cavities, promising better performance, cost reduction, and higher operating temperature than Nb. The Sn vapor diffusion method is currently the most preferred and successful technique to coat niobium cavities with Nb₃Sn. Among post-coating treatments to optimize the coating quality, higher temperature annealing without Sn is known to degrade Nb₃Sn because of Sn loss. We have investigated Nb₃Sn/Nb samples briefly annealed at 800-1000 °C, for 10 and 20 minutes to potentially improve the surface to enhance the performance of Nb₃Sn-coated cavities. Following the sample studies, …
Investigation Of The Multilayer Shielding Effect Through Nbtin-Ain Coated Bulk Niobium, Iresha Harshani Senevirathne, D. R. Beverstock, A-M Valente-Feliciano, Alex Gurevich, Jean R. Delayen
Investigation Of The Multilayer Shielding Effect Through Nbtin-Ain Coated Bulk Niobium, Iresha Harshani Senevirathne, D. R. Beverstock, A-M Valente-Feliciano, Alex Gurevich, Jean R. Delayen
Physics Faculty Publications
We report measurements of the dc field onset Bp of magnetic flux penetration through NbTiN-AlN coating on bulk niobium using the Hall probe experimental setup. The measurements of Bp reveal the multilayer shielding effect on bulk niobium under high magnetic fields at cryogenic temperatures. We observed a significant enhancement in Bp for the NbTiN-AlN coated Nb samples as compared to bare Nb samples. The observed dependence of Bp on the coating thickness is consistent with theoretical predictions.
Magnetic Field Mapping Of A Large-Grain 1.3 Ghz Single-Cell Cavity, Ishwari Prasad Parajuli, Jean R. Delayen, Alex V. Gurevich, Gianluigi Ciovati
Magnetic Field Mapping Of A Large-Grain 1.3 Ghz Single-Cell Cavity, Ishwari Prasad Parajuli, Jean R. Delayen, Alex V. Gurevich, Gianluigi Ciovati
Physics Faculty Publications
A new magnetic field mapping system for 1.3 GHz single-cell cavities was developed in order to reveal the impact of ambient magnetic field and temperature gradients during cool-down on the flux trapping phenomenon. Measurements were done at 2 K for different cool-down conditions of a large-grain cavity before and after 120 °C bake. The fraction of applied magnetic field trapped in the cavity walls was ~ 50% after slow cool-down and ~ 20% after fast cool-down. The results showed a weak correlation between between trapped flux locations and hot-spots causing the high-field Q-slope. The results also showed an increase of …
Development And Performance Of Rfd Crab Cavity Prototypes For Hl-Lhc Aup, L. Listori, P. Berrutti, M. Narduzzi, A. Castilla, S. U. De Silva, J. R. Delayen, N. A. Huque, Z. Li, A. Ratti
Development And Performance Of Rfd Crab Cavity Prototypes For Hl-Lhc Aup, L. Listori, P. Berrutti, M. Narduzzi, A. Castilla, S. U. De Silva, J. R. Delayen, N. A. Huque, Z. Li, A. Ratti
Physics Faculty Publications
The US will be contributing to the HL-LHC upgrade at CERN with the fabrication and qualification of RFD crabbing cavities in the framework of the HL-LHC Accelerator Upgrade Project (AUP) managed by Fermilab. AUP received Critical Decision 3 (CD-3) approval by DOE in December 2020 launching the project into the production phase. The electro-magnetic design of the cavity was inherited from the LHC Accelerator Research Program (LARP) but needed to be revised to meet new project requirements and to prevent issues encountered during beam tests performed at CERN in the R&D phase. Two prototype cavities were manufactured in industry and …
Fabrication And Testing Of A Prototype Rf-Dipole Crabbing Cavity, S. U. De Silva, J. R. Delayen, H. Park
Fabrication And Testing Of A Prototype Rf-Dipole Crabbing Cavity, S. U. De Silva, J. R. Delayen, H. Park
Physics Faculty Publications
Crabbing cavities are essential in particle colliders to compensate the luminosity degradation due to beam collision at a crossing angle. The 952.6 MHz 2-cell rf-dipole crabbing cavity system was proposed for the Jefferson Lab Electron-Ion Collider to restore the head-on collisions of electron and proton bunches at the interaction point. A prototype cavity was designed and developed to demonstrate the performance of multi-cell rf-dipole structures. This paper presents the fabrication process and cold test results of the first 2-cell rf-dipole prototype cavity.
Eic 197 Mhz Crab Cavity Rf Optimization, Zenghai Li, Subashini U. De Silva, Jean R. Delayen, Robert A. Rimmer, Qiong Wu, Binping Xiao, Wencan Xu
Eic 197 Mhz Crab Cavity Rf Optimization, Zenghai Li, Subashini U. De Silva, Jean R. Delayen, Robert A. Rimmer, Qiong Wu, Binping Xiao, Wencan Xu
Physics Faculty Publications
Crab cavities, operating at 197 MHz and 394 MHz respectively, will be used to compensate the loss of luminosity due to a 25 mrad crossing angle at the interaction point in the Electron Ion Collider (EIC). Both crab cavities are of the RF Dipole (RFD) shape. To meet the machine design requirements, there are a few important cavity design considerations that need to be addressed. First, to achieve stable cavity operation at the design voltages, cavity geometry details must be optimized to suppress potential multipacting. Incorporating strong HOM damping in the cavity design is required for the beam stability and …
First Use Of A Longitudinally Polarized Target With Clas12, C. D. Keith, J. Brock, C. Carlin, T. Kageya, V. Lagerquist, J. Maxwell, P. Pandey
First Use Of A Longitudinally Polarized Target With Clas12, C. D. Keith, J. Brock, C. Carlin, T. Kageya, V. Lagerquist, J. Maxwell, P. Pandey
Physics Faculty Publications
Run Group C comprises eight experiments utilizing the CLAS12 detector system in Hall B at Jefferson Lab to study the multidimensional partonic structure of nucleons. The experiments scatter electrons from polarized protons and neutrons in samples of solid NH3 and ND3, dynamically polarized at a temperature of 1 K in a 5 T magnetic field. After a brief description of the target system, the current status of the target and preliminary results of its performance in the experiment are presented.
Status And Future Plans For C³ R&D, Emilio A. Nanni, Martin Breidenbach, Zenghai Li, Caterina Vernieri, Faya Wang, Glen White, Mei Bai, Sergey Belomestnykh, Pushpalatha Bhat, Tim Barklow, William J. Berg, Valery Borzenets, John Byrd, Ankur Dhar, Ram C. Dhuley, Chris Doss, Joseph Duris, Auralee Edelen, Claudio Emma, Joseph Frisch, Annika Gabriel, Spenser Gessner, Carsten Hast, Chunguang Jing, Arkadiy Klebaner, Dongsung Kim, Anatoly Krasnykh, John Lewellen, Matthias Liepe, Michael Litos, Xueying Lu, Jared Maxon, David Montanari, Pietro Musumeci, Sergei Nagaitsev, Alireza Nassiri, Cho-Kuen Ng, David A. K. Othman, Marco Oriunno, Dennis Palmer, J. Ritchie Patterson, Michael E. Peskin, Thomas J. Peterson, John Power, Ji Qiang, James Rosenzweig, Vladimir Shiltsev, Muhammad Shumail, Evgenya Simakov, Emma Snively, Bruno Spataro, Sami Tantawi, Harry Van Der Graaf, Brandon Weatherford, Juhao Wu, Kent P. Wootton
Status And Future Plans For C³ R&D, Emilio A. Nanni, Martin Breidenbach, Zenghai Li, Caterina Vernieri, Faya Wang, Glen White, Mei Bai, Sergey Belomestnykh, Pushpalatha Bhat, Tim Barklow, William J. Berg, Valery Borzenets, John Byrd, Ankur Dhar, Ram C. Dhuley, Chris Doss, Joseph Duris, Auralee Edelen, Claudio Emma, Joseph Frisch, Annika Gabriel, Spenser Gessner, Carsten Hast, Chunguang Jing, Arkadiy Klebaner, Dongsung Kim, Anatoly Krasnykh, John Lewellen, Matthias Liepe, Michael Litos, Xueying Lu, Jared Maxon, David Montanari, Pietro Musumeci, Sergei Nagaitsev, Alireza Nassiri, Cho-Kuen Ng, David A. K. Othman, Marco Oriunno, Dennis Palmer, J. Ritchie Patterson, Michael E. Peskin, Thomas J. Peterson, John Power, Ji Qiang, James Rosenzweig, Vladimir Shiltsev, Muhammad Shumail, Evgenya Simakov, Emma Snively, Bruno Spataro, Sami Tantawi, Harry Van Der Graaf, Brandon Weatherford, Juhao Wu, Kent P. Wootton
Physics Faculty Publications
C3 is an opportunity to realize an e+e- collider for the study of the Higgs boson at √s = 250 GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint [2,3]. C3 is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C3 is the main linac. This paper presents the staged approach towards a …
Superconducting Non-Elliptical Cavities (Tem Cavity Designs), Subashini De Silva
Superconducting Non-Elliptical Cavities (Tem Cavity Designs), Subashini De Silva
Physics Faculty Publications
This lecture will present fundamental of RF to accelerate or reflect beams. The lecture will cover the electrical design method of the SRF high/medium/low beta cavities. The difference in the cavity design between TM mode and TE will be emphasized.
Modeling A Nb3Sn Cryounit In Gpt At Uitf, Sunil Pokharel, A. S. Hofler, Geoffrey A. Krafft
Modeling A Nb3Sn Cryounit In Gpt At Uitf, Sunil Pokharel, A. S. Hofler, Geoffrey A. Krafft
Physics Faculty Publications
Nb3Sn is a prospective material for future superconducting radio frequency (SRF) accelerator cavities. Compared to conventional niobium, the material can achieve higher quality factors, higher temperature operation, and potentially higher accelerating gradients (Eacc ≈ 96 MV/m). In this work, we performed modeling of the Upgraded Injector Test Facility (UITF) at Jefferson Lab utilizing newly constructed Nb3Sn cavities. We studied the effects of the buncher cavity and varied the gun voltage from 200-500 keV. We have calibrated and optimized the SRF cavity gradients and phases for the Nb3Sn five-cell cavities' energy gains with the …
Tuning Microwave Losses In Superconducting Resonators, Alex Gurevich
Tuning Microwave Losses In Superconducting Resonators, Alex Gurevich
Physics Faculty Publications
Performance of superconducting resonators, particularly cavities for particle accelerators and micro cavities and thin film resonators for quantum computations and photon detectors has been improved substantially by recent materials treatments and technological advances. As a result, the niobium cavities have reached the quality factors Q ~ 1011 at 1-2 GHz and 1.5 K and the breakdown radio-frequency (rf) fields H close to the dc superheating eld of the Meissner state. These advances raise the question whether the state-of-the-art cavities are close to the fundamental limits, what these limits actually are, and to what extent the Q and H limits …
Superheating Field In Superconductors With Nanostructured Surfaces, W. P. M. R. Pathirana, A. Gurevich
Superheating Field In Superconductors With Nanostructured Surfaces, W. P. M. R. Pathirana, A. Gurevich
Physics Faculty Publications
We report calculations of a dc superheating field Hsh in superconductors with nanostructured surfaces. Numerical simulations of the Ginzburg-Landau (GL) equations were performed for a superconductor with an inhomogeneous impurity concentration, a thin superconducting layer on top of another superconductor, and superconductor-insulator-superconductor (S-I-S) multilayers.The superheating field was calculated taking into account the instability of the Meissner state with a nonzero wavelength along the surface, which is essential for realistic values of the GL parameter κ. Simulations were done for the materials parameters of Nb and Nb3Sn at different values of κ and the mean free paths. We …
Nonlinear Meissner Effect In Nb3Sn Coplanar Resonators, Junki Makita, C. Sundahl, Gianluigi Ciovati, C. B. Eom, Alex Gurevich
Nonlinear Meissner Effect In Nb3Sn Coplanar Resonators, Junki Makita, C. Sundahl, Gianluigi Ciovati, C. B. Eom, Alex Gurevich
Physics Faculty Publications
We investigated the nonlinear Meissner effect (NLME) in Nb3Sn thin-film coplanar resonators by measuring the resonance frequency as a function of a parallel magnetic field at different temperatures. We used low rf power probing in films thinner than the London penetration depth λ(B) to significantly increase the field onset of vortex penetration and measure the NLME under equilibrium conditions. Contrary to the conventional quadratic increase of λ(B) with B expected in s-wave superconductors, we observed a nearly linear increase of the penetration depth with B. We concluded that this behavior of λ(B) is due to weak linked grain …
Samples For 3rd Harmonic Magnetometry Assessment Of Nbtin-Based Sis Structures, D.R. Beverstock, C.Z. Antoine, Jean R. Delayen, D. Manos, Iresha Harshani Senevirathne, J. K. Spradlin, A-M. Valente-Feliciano
Samples For 3rd Harmonic Magnetometry Assessment Of Nbtin-Based Sis Structures, D.R. Beverstock, C.Z. Antoine, Jean R. Delayen, D. Manos, Iresha Harshani Senevirathne, J. K. Spradlin, A-M. Valente-Feliciano
Physics Faculty Publications
In the quest for alternative superconducting materials to bring accelerator cavity performance beyond the bulk niobium (Nb) intrinsic limits, a promising concept uses superconductor-insulator-superconductor (SIS) thin film structures that allows magnetic flux shielding in accelerator cavities to higher fields [1]. Candidate materials for such structures are NbTiN as the superconductor and AlN as the insulator. We have demonstrated high quality NbTiN and AlN deposited by reactive DC magnetron sputtering (DCMS), both for individual layers and multilayers. Interface quality has been assessed for bilayer stacks with 250 nm NbTiN layers and AlN thicknesses from 30 nm down to1 nm. These SIS …
High Resolution Diagnostic Tools For Superconducting Radio Frequency Cavities, I. Parajuli, G. Ciovati, J. R. Delayen
High Resolution Diagnostic Tools For Superconducting Radio Frequency Cavities, I. Parajuli, G. Ciovati, J. R. Delayen
Physics Faculty Publications
Superconducting radio-frequency (SRF) cavities are one of the fundamental building blocks of modern particle accelerators. To achieve the highest quality factors (1010–1011), SRF cavities are operated at liquid helium temperatures. Magnetic flux trapped on the surface of SRF cavities during cool-down below the critical temperature is one of the leading sources of residual RF losses. Instruments capable of detecting the distribution of trapped flux on the cavity surface are in high demand in order to better understand its relation to the cavity material, surface treatments and environmental conditions. We have designed, developed, and commissioned two high-resolution …
Bunch Length Measurements At The Cebaf Injector At 130 Kv, Sunil Pokharel, M. W. Bruker, J. M. Grames, A. S. Hofler, R. Kazimi, Geoffrey A. Krafft, S. Zhang
Bunch Length Measurements At The Cebaf Injector At 130 Kv, Sunil Pokharel, M. W. Bruker, J. M. Grames, A. S. Hofler, R. Kazimi, Geoffrey A. Krafft, S. Zhang
Physics Faculty Publications
In this work, we investigated the evolution in bunch length of beams through the CEBAF injector for low to high charge per bunch. Using the General Particle Tracer (GPT), we have simulated the beams through the beamline of the CEBAF injector and analyzed the beam to get the bunch lengths at the location of chopper. We performed these simulations with the existing injector using a 130 kV gun voltage. Finally, we describe measurements to validate these simulations. The measurements have been done using chopper scanning technique for two injector laser drive frequency modes: one with 500 MHz, and another with …
Athena Detector Proposal — A Totally Hermetic Electron Nucleus Apparatus Proposed For Ip6 At The Electron-Ion Collider, J. Adam, L. Adamczyk, N. Agrawal, C. Aidala, W. Akers, M. Alekseev, M.M. Allen, F. Ameli, A. Angerami, P. Antonioli, N. J. Apadula, A. Aprahamian, W. Armstrong, M. Arratia, J. R. Arrington, A. Asaturyan, E. C. Aschenauer, K. Augsten, S. Aune, M. Żurek, Et Al.
Athena Detector Proposal — A Totally Hermetic Electron Nucleus Apparatus Proposed For Ip6 At The Electron-Ion Collider, J. Adam, L. Adamczyk, N. Agrawal, C. Aidala, W. Akers, M. Alekseev, M.M. Allen, F. Ameli, A. Angerami, P. Antonioli, N. J. Apadula, A. Aprahamian, W. Armstrong, M. Arratia, J. R. Arrington, A. Asaturyan, E. C. Aschenauer, K. Augsten, S. Aune, M. Żurek, Et Al.
Physics Faculty Publications
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges.
Improving The Electrostatic Design Of The Jefferson Lab 300 Kv Dc Photogun, S.A.K. Wijethunga, M. A. Mamun, R. Suleiman, C. Hernandez-Garcia, B. Bullard, J. R. Delayen, J. Grames, G. A. Krafft, G. Palacios-Serrano, M. Poelker
Improving The Electrostatic Design Of The Jefferson Lab 300 Kv Dc Photogun, S.A.K. Wijethunga, M. A. Mamun, R. Suleiman, C. Hernandez-Garcia, B. Bullard, J. R. Delayen, J. Grames, G. A. Krafft, G. Palacios-Serrano, M. Poelker
Physics Faculty Publications
The 300 kV DC high voltage photogun at Jefferson Lab was redesigned to deliver electron beams with a much higher bunch charge and improved beam properties. The original design provided only a modest longitudinal electric field (Ez) at the photocathode, which limited the achievable extracted bunch charge. To reach the bunch charge goal of approximately few nC with 75 ps full-width at half-maximum Gaussian laser pulse width, the existing DC high voltage photogun electrodes and anode–cathode gap were modified to increase Ez at the photocathode. In addition, the anode aperture was spatially shifted with respect to the beamline longitudinal axis …
Magnetic Field Penetration Technique To Study Field Shielding Of Multilayered Superconductors, Iresha Harshani Senevirathne, Alex Gurevich, Jean R. Delayen, A-M Valente-Feliciano
Magnetic Field Penetration Technique To Study Field Shielding Of Multilayered Superconductors, Iresha Harshani Senevirathne, Alex Gurevich, Jean R. Delayen, A-M Valente-Feliciano
Physics Faculty Publications
The SIS structure which consists of alternative thin layers of superconductors and insulators on a bulk niobium has been proposed to shield niobium cavity surface from high magnetic field and hence increase the accelerating gradient. The study of the behavior of multilayer superconductors in an external magnetic field is essential to optimize their SRF performance. In this work we report the development of a simple and efficient technique to measure penetration of magnetic field into bulk, thin film and multilayer superconductors. Experimental setup contains a small superconducting solenoid which can produce a parallel surface magnetic field up to 0.5 T …
Magnetic Field Mapping Of 1.3 Ghz Superconducting Radio Frequency Niobium Cavities, Ishwari P. Parajuli, Gianluigi Ciovati, Jean R. Delayen, Alex V. Gurevich
Magnetic Field Mapping Of 1.3 Ghz Superconducting Radio Frequency Niobium Cavities, Ishwari P. Parajuli, Gianluigi Ciovati, Jean R. Delayen, Alex V. Gurevich
Physics Faculty Publications
Niobium is the material of choice to build superconducting radio frequency (SRF) cavities, which are fundamental building blocks of modern particle accelerators. These cavities require a cryogenic cool-down to ~2 - 4 K for optimum performance minimizing RF losses on the inner cavity surface. However, temperature-independent residual losses in SRF cavities cannot be prevented entirely. One of the significant contributor to residual losses is trapped magnetic flux. The flux trapping mechanism depends on different factors, such as surface preparations and cool-down conditions. We have developed a diagnostic magnetic field scanning system (MFSS) using Hall probes and anisotropic magneto-resistance sensors to …
Preliminary Results Of Magnetic And Temperature Map System For 3 Ghz Superconducting Radio Frequency Cavities, Ishwari Parajuli, Bashu Khanal, Gianluigi Ciovati, Jean Delayen, Alex Gurevich
Preliminary Results Of Magnetic And Temperature Map System For 3 Ghz Superconducting Radio Frequency Cavities, Ishwari Parajuli, Bashu Khanal, Gianluigi Ciovati, Jean Delayen, Alex Gurevich
Physics Faculty Publications
Superconducting radio frequency (SRF) cavities are fundamental building blocks of modern particle accelerators. When we cool these cavities at cryogenic temperature ~2 – 4 K, we can get optimum performance by minimizing RF losses on the inner cavity surface. However, temperature-independent residual losses in SRF cavities cannot be prevented entirely. One of the leading sources of residual losses in SRF cavities is trapped magnetic flux. The flux trapping mechanism depends on different surface preparations and cool-down conditions. We have designed, developed, and commissioned a combined magnetic (B) and temperature (T) mapping system using anisotropic magneto-resistance (AMR) sensors and carbon resistors …