Physics Commons^™

C.V. - Wojciech Budzianowski, Wojciech M. Budzianowski

Wojciech Budzianowski

-

Renewable Energy And Sustainable Development (Resd) Group, Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Procesy Cieplne I Aparaty (Lab), Wojciech M. Budzianowski

Wojciech Budzianowski

-

Inżynieria Chemiczna Lab., Wojciech M. Budzianowski

Wojciech Budzianowski

-

Inżynieria Chemiczna Ćw., Wojciech M. Budzianowski

Wojciech Budzianowski

-

Tematyka Prac Doktorskich, Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Rheological Studies Of Pmma–Pvc Based Polymer Blend, Ramesh T Subramaniam

Ramesh T Subramaniam

In this research, two systems are studied. In the first system, the ratio of poly (methyl methacrylate) (PMMA) and poly (vinyl chloride) (PVC) is varied, whereas in the second system, the composition of PMMA–PVC polymer blends is varied with dopant salt, lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) with a fixed ratio of 70 wt% of PMMA to 30 wt% of PVC. Oscillation tests such as amplitude sweep and frequency sweep are discussed in order to study the viscoelastic properties of samples. Elastic properties are much higher than viscous properties within the range in the amplitude sweep and oscillatory shear sweep studies. …

Termodynamika Procesowa I Techniczna Lab., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Tematyka Prac Dyplomowych Dla Studentów Wydziału Mechaniczno-Energetycznego Pwr., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Tematyka Prac Dyplomowych Dla Studentów Wydziału Chemicznego Pwr., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Mechanika Płynów Lab., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Impact Of Alkaline Doping And Reducing Conditions On Lafeo3, Geoffrey L. Beausoleil Ii

Geoffrey L Beausoleil II

Efficient and reliable materials for gas separation, syngas production, and hybrid nuclear power plants must be capable of reliably operating at a high-temperature range of 700-1000°C and under exposure to highly oxidizing and reducing conditions. Candidate materials for these applications include alkaline metal doped lanthanum ferrite.

In the first study, the impact of A site substitution by different alkaline metals on lanthanum ferrite (LMF, M=Ca, Sr, and Ba) was investigated. The study focused on thermal expansion near the Néel transition temperature and a magneto-elastic contribution to thermal expansion was identified for each sample. Iron oxidation, Fe3+ to Fe4+, was identified …

Bulk Heterojunction Photodiode: To Detect The Whole Visible Spectrum, Shahino Mah Abdullah

Shahino Mah Abdullah

In this paper, we report an organic bulk heterojunction photo-sensor that has been fabricated by using a composite of a polymer material poly(3-hexylthiophene-2,5-diyl) (P3HT) and a dye material vanadyl-phthalocyanine (VOPcPhO). The UV–Vis spectrum shows that this composite exhibits a broad absorption over the whole visible range. The photoluminescence (PL) spectra of P3HT and VOPcPhO blend have been studied to optimize the ratio of P3HT and VOPcPhO. The photo-sensitivity has been investigated under different applied voltages in reverse direction. The photoconductivity sensitivity value has been calculated as 5.65 × 102 Sm/W. The photo-responsivity of the sensor has been investigated under 100 …

The International Trafficking In Arms Regulations: Precluding Innovation In Academic Spacecraft Engineering — Or Are They?, Jeremy Straub, Joe Vacek

Jeremy Straub

Government regulations and uncertainty about their enforcement can be a significant barrier to innovation. In business, it is undesirable to consume time and other resources developing a product that cannot be sold or which requires navigating significant bureaucracy for each sale. In academ-ia, where limited funding is available prior to the submission of a grant pro-posal and receipt of an award, proposal-stage compliance costs can derail a project long before it begins. This paper reviews the International Traffick-ing in Arms Regulations (ITAR) and their impact on spacecraft research in academia, private research labs and industry. It reviews the exemptions available, …

Organic Semiconductors: Applications In Solar Photovoltaic And Sensor Devices, Shahino Mah Abdullah

Shahino Mah Abdullah

Organic semiconductor-based solar photovoltaic cells and sensors are scalable, printable, solution processable, bendable and light-weight. Furthermore, organic semiconductors require low energy fabrication process, hence can be fabricated at low cost as light-weight solar cells and sensors, coupled with the ease of processing, as well as compatibility, with flexible substrates. Organic semiconductors have been identified as a fascinating class of novel semiconductors that have the electrical and optical properties of metals and semiconductors. The continuous demand to improve the properties of organic semiconductors raises the quest for a deep understanding of fundamental issues and relevant electronic processes. Organic semiconductor thin film …

Determining Planck's Constant Using Leds, Zechariah Thurman

Zechariah Thurman

In this paper a value for Planck's constant is measured. The value found with this experiment is within two sigma of the accepted value, this constitutes reasonable agreement with theory for the purposes of this experiment.

Microfabricated Nanotopological Surfaces For Study Of Adhesion-Dependent Cell Mechanosensitivity, Weiqiang Chen, Yubing Sun, Jianping Fu

Weiqiang Chen

Cells exhibit high sensitivity and diverse responses to the intrinsic nanotopography of the extracellular matrix through their nanoscale cellular sensing machinery. A simple microfabrication method for precise control and spatial patterning of the local nanoroughness on glass surfaces by using photolithography and reactive ion etching is reported. It is demonstrated that local nanoroughness as a biophysical cue could regulate a diverse array of NIH/3T3 fi broblast behaviors, including cell morphology, adhesion, proliferation, migration, and cytoskeleton contractility. The capability to control and further predict cellular responses to nanoroughness might suggest novel methods for developing biomaterials mimicking nanotopographic structures in vivo for …

Surface-Micromachined Microfiltration Membranes For Efficient Isolation And Functional Immunophenotyping Of Subpopulations Of Immune Cells, Weiqiang Chen, Nien-Tsu Huang, Boram Oh, Raymond H. W. Lam, Rong Fan, Timothy T. Cornell, Thomas P. Shanley, Katsuo Kurabayashi, Jianping Fu

Weiqiang Chen

An accurate measurement of the immune status in patients with immune system disorders is critical in evaluating the stage of diseases and tailoring drug treatments. The functional cellular immunity test is a promising method to establish the diagnosis of immune dysfunctions. The conventional functional cellular immunity test involves measurements of the capacity of peripheral blood mononuclear cells to produce pro-inflammatory cytokines when stimulated ex vivo. However, this “bulk” assay measures the overall reactivity of a population of lymphocytes and monocytes, making it difficult to pinpoint the phenotype or real identity of the reactive immune cells involved. In this research, we …

Mechaniczny Rozdział Faz Proj., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Challenges And Prospects Of Processes Utilising Carbonic Anhydrase For Co2 Separation, Patrycja Szeligiewicz, Wojciech M. Budzianowski

Wojciech Budzianowski

This article provides an analysis of processes for separation CO2 by using carbonic anhydrase enzyme with particular emphasis on reactive-membrane solutions. Three available processes are characterised. Main challenges and prospects are given. It is found that in view of numerous challenges practical applications of these processes will be difficult in near future. Further research is therefore needed for improving existing processes through finding methods for eliminating their main drawbacks such as short lifetime of carbonic anhydrase or low resistance of reactive membrane systems to impurities contained in flue gases from power plants.

Correct Spectral Conversion Between Surface‐Enhanced Raman And Plasmon Resonance Scattering From Nanoparticle Dimers For Single‐Molecule Detection, Kyuwan Lee

Kyuwan Lee

Simultaneous measurement of surface-enhanced Raman scattering (SERS) and localized surface plasmon resonance (LSPR) in nanoparticle dimers presents outstanding opportunities in molecular identification and in the elucidation of physical properties, such as the size, distance, and deformation of target species. SERS–LSPR instrumentation exists and has been used under limited conditions, but the extraction of SERS and LSPR readouts from a single measurement is still a challenge. Herein, the extraction of LSPR spectra from SERS signals is reported and a tool for measuring the interparticle distance from Raman enhancement data by the standardization of the SERS signal is proposed. The SERS nanoruler …

Modelling Three-Phase Flow In Metallurgical Processes, Christoph Goniva, Gijsbert Wierink, Kari Heiskanen, Stefan Pirker, Christoph Kloss

Gijsbert Wierink

The interaction between gasses, liquids, and solids plays a critical role in many processes, such as coating, granulation and the blast furnace process. In this paper we present a comprehensive numerical model for three phase flow including droplets, particles and gas. By means of a coupled Computational Fluid Dynamics (CFD) - Discrete Element Method (DEM) approach the physical core phenomena are pictured at a detailed level. Sub-models for droplet deformation, breakup and coalescence as well as droplet-particle and wet particle-particle interaction are applied. The feasibility of this model approach is demonstrated by its application to a rotating drum coater. The …

Nanoroughened Surfaces For Efficient Capture Of Circulating Tumor Cells Without Using Capture Antibodies, Weiqiang Chen, Shinuo Weng, Feng Zhang, Steven Allen, Xiang Li, Liwei Bao, Raymond H. W. Lam, Jill A. Macoska, Sofia D. Merajver, Jianping Fu

Weiqiang Chen

Circulating tumor cells (CTCs) detached from both primary and metastatic lesions represent a potential alternative to invasive biopsies as a source of tumor tissue for the detection, characterization and monitoring of cancers. Here we report a simple yet effective strategy for capturing CTCs without using capture antibodies. Our method uniquely utilized the differential adhesion preference of cancer cells to nanorough surfaces when compared to normal blood cells and thus did not depend on their physical size or surface protein expression, a significant advantage as compared to other existing CTC capture techniques.

Hordó Kollektor 3.0, Pal R. Molnar

Pal R. Molnar

Napjainkban egyre többen telepítenek napkollektorokat, a használati melegvíz ellátására, illetve fűtés rásegítésre. Ezen kollektorok hatásfoka széles határok között váltakozik.

Formalizing Mission Analysis And Design Techniques For High Altitude Ballooning, Jeremy Straub, Ronald Fevig

Jeremy Straub

High altitude balloon (HAB) missions can be and are used to teach concepts related to spacecraft and satellite design. A HAB mission, however, presents unique characteristics, which must be understood and respected to produce a desirable outcome. Because of this, flying an unaltered satellite design as a HAB payload would be as undesirable as utilizing an unaltered HAB design as a satellite. A well-defined process for HAB mission design is thus needed. The process presented mirrors commonly used space mission design processes to facilitate easy transition between the two. It is also comparatively simple, due to the smaller scale of …

Nanotopography Influences Adhesion, Spreading, And Self-Renewal Of Human Embryonic Stem Cells, Weiqiang Chen, Luis G. Villa-Diaz, Yubing Sun, Shinuo Weng, Jin Koo Kim, Raymond H. W. Lam, Lin Han, Rong Fan, Paul H. Krebsbach, Jianping Fu

Weiqiang Chen

Human embryonic stem cells (hESCs) have great potentials for future cell-based therapeutics. However, their mechanosensitivity to biophysical signals from the cellular microenvironment is not well characterized. Here we introduced an effective microfabrication strategy for accurate control and patterning of nanoroughness on glass surfaces. Our results demonstrated that nanotopography could provide a potent regulatory signal over different hESC behaviors, including cell morphology, adhesion, proliferation, clonal expansion, and self-renewal. Our results indicated that topological sensing of hESCs might include feedback regulation involving mechanosensory integrin-mediated cell matrix adhesion, myosin II, and E-cadherin. Our results also demonstrated that cellular responses to nanotopography were cell-type …

Insights Into The Power Law Relationships That Describe Mass Deposition Rates During Electrospinning, Jonathan J. Stanger, Nick Tucker, Simon Fullick, Mathieu Sellier, Mark P. Staiger

Jonathan J Stanger

This work explores how in electrospinning, mass deposition rate and electric current relate to applied voltage and electrode separation, factors give a range of applied electric fields. Mass deposition rate was measured by quantifying the rate of dry fibre deposited over time. Electric current was measured using a current feedback from the high voltage supply. The deposition of fibre was observed to occur at a constant rate for deposition times of up to 30 min. Both the mass deposition rate and electric current were found to vary with the applied voltage according to a power law. The relationship between the …

Manipulation Of Electrospun Fibres In Flight: The Principle Of Superposition Of Electric Fields As A Control Method, Nurfaizey A. Hamid, Jonathan J. Stanger, Nick Tucker, Andrew Wallace, Mark P. Staiger

Jonathan J Stanger

This study investigates the magnitude of movement of the area of deposition of electrospun fibres in response to an applied auxiliary electric field. The auxiliary field is generated by two pairs of rod electrodes positioned adjacent and parallel to the line of flight of the spun fibre. The changes in shape of the deposition area and the degree of movement of the deposition area are quantified by optical scanning and image analysis. A linear response was observed between the magnitude of movement of the deposition area and voltage difference between the auxiliary and deposition electrodes. A squeezing effect which changed …

Local Non-Equilibrium Diffusion Model For Solute Trapping During Rapid Solidification, Sergey Sobolev

Sergey Sobolev

A local non-equilibrium diffusion model (LNDM) for rapid solidification of binary alloys has been briefly reviewed and used to modify a number of solute trapping models with different solid–liquid interface kinetics. The LNDM takes into account deviation from local equilibrium of a solute diffusion field in bulk liquid on the basis that the exact solutions to hyperbolic diffusion equations govern the solute concentration and solute flux in bulk liquid under local non-equilibrium conditions. The LNDM leads to a velocity-dependent effective diffusion coefficient in bulk liquid ahead of the solid–liquid interface, which goes to zero when the interface velocity goes to …

Rapid Colloidal Solidifications Under Local Nonequilibrium Diffusion Conditions, Sergey Sobolev

Sergey Sobolev

Partition coefficient for rapid solidification of colloidal suspensions has been calculated under local nonequilibrium diffusion conditions typically used when processing advanced materials. It has been demonstrated that the local nonequilibrium diffusion effects stabilize the planar solid liquid interface and lead to an abrupt transition to diffusionless solidification with complete particle trapping. The effective diffusion coefficient, which depends on interface velocity and particle size, has been introduced. It explains the strong dependences of the partition coefficient and the velocity leading to absolute stability of a planar solid–liquid interface on particle size.