Inorganic Chemistry Commons^™

Metal-Organic Frameworks Based On Pyridyl-Tetrazole Ligands Containing Ester Or Carboxylate Pendant Arms, Ursula Sheridan, John Gallagher, Morten Bjerrum, Adrienne Fleming, Fintan Kelleher, John Mcginley

Articles

The coordination of pyridyl-tetrazole derivatives containing ester substituents, at either the N-1 or N-2 position of the tetrazole ring, with copper(II) chloride results in the formation of either 1:1 or 1:2 copper to ligand complexes, depending on the ligand. However, when the ester functionality is changed to a carboxylate group, the resulting complexation reactions yield metal-organic frameworks. The resulting structures vary dramatically in pore size, depending on both reaction solvents and position of carboxylate group on the tetrazole ring. Despite the presence of sodium cations in the reaction mixtures, no sodium incorporation was ever observed in any of the complexes. …

Novel Microwave Assisted Synthesis Of Zns Nanomaterials, Suresh Pillai, Michael Seery, Damian Synnott, John Colreavy, Stephen Hinder

Articles

A novel ambient pressure microwave-assisted technique is developed in which silver and indium modified ZnS is synthesised. The as prepared ZnS is characterised by X-ray diffraction, UV-Vis spectroscopy, X-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle sizes below 10 nm. The synthesis technique leads to defects in the crystal which induce mid energy levels in the band gap and lead to indoor light photocatalytic activity. Increasing the amount of silver causes a phase transition from cubic blende to hexagonal phase ZnS. In a comparative study, when the ZnS cubic blende is heated in a conventional …

A Highly Efficient Tio2-Xcx Nano-Heterojunction Photocatalyst For Visible-Light Induced Antibacterial Applications, Vinodkumar Etacheri, Michael Seery, Stephen Hinder, Georg Michlits, Suresh Pillai

Articles

Visible-light-induced antibacterial activity of carbon-doped anatase-brookite titania nano-heterojunction photocatalysts are reported for the first time. These heterostructures were prepared using a novel low temperature (100 °C) non-hydrothermal low power microwave (300 W) assisted method. Formation of interband C 2p states was found to be responsible for the band gap narrowing of the carbon doped heterojunctions. The most active photocatalyst obtained after 60 minutes of microwave irradiation exhibits a 2-fold higher visible-light induced photocatalytic activity in contrast to the standard commercial photocatalyst Evonik-Degussa P-25. Staphylococcus aureus inactivation rate constant for carbon-doped nano-heterojunctions and the standard photocatalyst was 0.0023 and -0.0081 min …

Nitrogen And Copper Doped Solar Light Active Tio2 Photocatalysts For Water Decontamination, Mike Fisher, Donal Keane, Pilar Fernandez-Ibanez, John Colreavy, Stephen Hinder, Kevin Mcguigan, Suresh Pillai

Articles

A novel class of photocatalytic coating capable of degrading bacterial and chemical contaminants in the presence of visible sunlight wavelengths was produced by depositing a stable photocatalytic TiO

2 film on the internal lumen of glass bottles via a sol–gel method. This coating was prepared in either undoped form or doped with nitrogen and/or copper to produce visible light-active TiO2 films which were annealed at 600 ◦C and were characterized by Raman and X-ray photoelectron spectroscopy. The presence of doped and undoped TiO2 films was found to accelerate the degradation of methylene blue in the presence of natural sunlight, while …

Functionalized Ruthenatricarbadecaborane Via Selective Cage Iodination And Sonogashira Coupling Reactions, Ariane Perez-Gavilan, Larry Sneddon, Patrick J. Carroll

Articles

Selective iodination of the cyclopentadienylruthenium tricarbadecaboranyl complexes 1-(η5-C5H5)–2-Ph–closo-1,2,3,4-RuC3B7H9 (1) and 1-(η5-C5(CH3)5)–2-Ph–closo-1,2,3,4-RuC3B7H8 (2) to form their mono-iodo derivatives, 1-(η5-C5H5)–2-Ph–6-I–closo-1,2,3,4-RuC3B7H9 (3) and 1-(η5-C5(CH3)5)–2-Ph–6-I–closo-1,2,3,4-RuC3B7H8(4), was achieved in 90% yields by their reactions with ICl in CH2Cl2 solutions. Also isolated in trace amounts from the reaction with 2 was the di-iodo 1-(η5-C5(CH3)5)–2-Ph–6,11-I2–closo-1,2,3,4-RuC3B7H7, (5) complex. The sonication-promoted Sonogashira coupling reaction of 3 with terminal acetylenes catalyzed by Pd(dppf)Cl2/CuI yielded the functionalized ruthenatricarbadecaboranyl complexes 1-(η5-C5H5)–2-Ph–6-(Ph-C≡C)–closo-1,2,3,4-RuC3B7H8 (6), 1-(η5-C5H5)–2-Ph–6-[CH3CH2C(O)OCH2-C≡C]–closo-1,2,3,4-RuC3B7H8 (7), …

Application Of Niobium Enriched Ormosils As Thermally Stable Coatings For Aerospace Aluminium Coatings, P.C. Rajath Varma, Mohamed Oubaha, Pradeepan Periyat, Colette Mcdonagh, Brendan Duffy

Articles

The aim of this experimental research is to study the ability of niobium rich sol-gel coatings to withstand thermal stress, while remaining impermeable to corrosive agents for the protection of aerospace alloys. The coating material is developed via polymeric sol-gel synthesis employing 3-(trimethoxysilyl)propylmethacrylate (MAPTMS) and niobium ethoxide precursors as a source of silicon and niobium, respectively. The beneficial effect of niobium inclusion within coating was characterised spectroscopically, calorimetrically and electrochemically. The thermal cycling effects of the coating were studied using microscopic and accelerated test methods. Electrochemical tests showed that corrosion current of the material was 2 orders lower in magnitude …

Crystallisation And Phase Transition Characteristics Of Sol-Gel-Synthesized Zinc Titanates, Suresh Pillai, Michael Seery, Nicholas Nolan

Articles

No abstract provided.

Silver Doped Perfluoropolyether-Urethane Coatings: Antibacterial Activity And Surface Analysis, Niall Stobie, Brendan Duffy, Steven Hinder, Patrick Mchale, Declan Mccormack

Articles

The colonisation of clinical and industrial surfaces with pathogenic microorganisms has prompted increased research into the development of effective antibacterial and antifouling coatings. There is evidence that implanted biomedical surfaces coated with metallic silver can be inactivated by hysiological fluids, thus reducing the bioactivity of the coating. In this work, we report the biofilm inhibition of Staphylococcus epidermidis using a roomtemperatureprocessedsilver dopedperfluoropolyether-urethane coating. The release of silver ions from these fluoropolymers over a six-day period inhibited bacterial encrustation – as observed by scanning electron microscopy (SEM). X-ray photoelectron spectroscopy (XPS) analysis indicated differences in carbon, fluorine and sodium surface composition …

One-Pot Synthesis Of Anionic (Nitrogen) And Cationic (Sulfur) Codoped High-Temperature Stable, Visible Light Active, Anatase Photocatalysts, Suresh Pillai, Declan Mccormack, Steven Hinder, Pradeepan Periyat

Articles

No abstract provided.

One-Pot Synthesis Of Anionic (Nitrogen) And Cationic (Sulfur) Codoped High-Temperature Stable, Visible Light Active, Anatase Photocatalysts, Suresh Pillai, Declan Mccormack, Steven Hinder, Pradeepan Periyat

Articles

No abstract provided.

Effect Of Organic Chelates On The Performance Of Hybrid Sol–Gel Coated Aa2024-T3 Aluminium Alloys, Rajath Varma, John Colreavy, John Cassidy, Mohamed Oubaha, Colette Mcdonagh, Brendan Duffy

Articles

Sol–gels are organic–inorganic polymers formed by hydrolysis/condensation reactions of alkoxide precursors, primarily silanes, which have found applications as electronic, optical and protective coatings. These coatings possess important characteristics such as chemical stability, physical strength and scratch resistance. Further performance improvement is achieved through the incorporation of zirconium and titanium based nanoparticles, also formed through the sol–gel process. However due to the inherent difference in the reactivity of the precursors, the hydrolysis of each precursor must be carried out separately before being combined for final condensation. Zirconium precursors are commonly chelated using acetic acids, prior to hydrolysis, to lower the hydrolysis …

Influence Of Magnesium Nitrate On The Corrosion Performance Of Sol-Gel Coated Aa2024-T3 Aluminium Alloy, Rajath Varma, Brendan Duffy, John Cassidy

Articles

Traditional anti-corrosion technology has relied heavily on using reducible metal species, predominantly hexavalent chromium (Cr(VI)), for protecting reactive metal alloys such as aluminium which is extensively used in the aerospace sector. However, the impending changes in the use of Cr(VI) in Europe and the United States have forced aerospace manufacturers to examine alternative materials for protecting aluminium. One of the most promising alternatives being investigated are organosilane based sol-gels containing anticorrosion additives. In this work the anti-corrosion properties of magnesium (II) nitrate (Mg(NO3)2) as a inhibitor was investigated at different concentrations (0.1% - 1.0 wt %) in a methyltriethoxysilane (MTEOS) …

Improved High-Temperature Stability And Sun-Light-Driven Photocatalytic Activity Of Sulfur-Doped Anatase Tio2, Suresh Pillai, Declan Mccormack, Pradeepan Periyat, John Colreavy, Steve Hinder

Articles

No abstract provided.

Silver Doped Titanium Dioxide Nanomaterials For Enhanced Visible Light Photocatalysis, Michael Seery, Reena George, Suresh Pillai, Patrick Floris

Articles

This paper presents a systematic study on two different preparation methods for titanium dioxide with silver. The silver can be incorporated by irradiating the reaction mixture during preparation to reduce silver ion to silver metal or by direct calcination of the sol–gel material to decompose silver nitrate to silver. Of the two methods, we found the latter produces a more effective photocatalytic material (6–50% improvement in catalytic efficiency), which is attributed to the fact that the silver is homogeneously dispersed throughout the material. The efficiency of the materials were examined using a Q-Sun solar simulator (visible light) and in Dublin …