Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 20 of 20
Full-Text Articles in Physical Sciences and Mathematics
Polypyrrole Doped With Redox-Active Poly(2-Methoxyaniline-5-Sulfonic Acid) For Lithium Secondary Batteries, Yang Yang, Caiyun Wang, Syed A. Ashraf, Gordon G. Wallace
Polypyrrole Doped With Redox-Active Poly(2-Methoxyaniline-5-Sulfonic Acid) For Lithium Secondary Batteries, Yang Yang, Caiyun Wang, Syed A. Ashraf, Gordon G. Wallace
Gordon Wallace
Polypyrrole is a promising electrode material for flexible/bendable energy storage devices due to its inherent fast redox switching, mechanical flexibility, easy processability and being environmentally benign. However, its low attainable capacity limits its practical applications. Here, we synthesise a polypyrrole/poly(2-methoxyaniline-5-sulfonic acid) (PPy/PMAS) composite by incorporating redox-active PMAS into a PPy matrix via an electropolymerization method. For comparison, polypyrrole containing the electrochemically inert dopant p-toluenesulfonate (PPy-pTS) was prepared under the same conditions. The resultant PPy/PMAS film shows greatly improved electrochemical properties by harnessing the contribution from PMAS, i.e. higher specific capacity, better rate capability and improved cycling stability when used as …
Quantifying Fibronectin Adhesion With Nanoscale Spatial Resolution On Glycosaminoglycan Doped Polypyrrole Using Atomic Force Microscopy, Amy Gelmi, Michael J. Higgins, Gordon G. Wallace
Quantifying Fibronectin Adhesion With Nanoscale Spatial Resolution On Glycosaminoglycan Doped Polypyrrole Using Atomic Force Microscopy, Amy Gelmi, Michael J. Higgins, Gordon G. Wallace
Gordon Wallace
The interaction of ECM proteins is critical in determining the performance of materials used in biomedical applications such as tissue regeneration, implantable bionics and biosensing. Methods: To improve our understanding of ECM protein–conducting polymer interactions, we have used Atomic Force Microscopy (AFM) to elucidate the interactions of fibronectin (FN) on polypyrrole (PPy) doped with different glycosaminoglycans. Results: We were able to classify four main types of FN interactions, including those related to 1) non-specific adhesion, 2) protein unfolding and subsequent unbinding from the surface, 3) desorption and 4) interactions with no adhesion. FN adhesion on PPy/hyaluronic acid showed a significantly …
Surface Properties And Interaction Forces Of Biopolymer-Doped Conductive Polypyrrole Surfaces By Atomic Force Microscopy, Jani M. Pelto, Suvi P. Haimi, Aliisa S. Siljander, Susanna S. Miettinen, Kirsi M. Tappura, Michael J. Higgins, Gordon G. Wallace
Surface Properties And Interaction Forces Of Biopolymer-Doped Conductive Polypyrrole Surfaces By Atomic Force Microscopy, Jani M. Pelto, Suvi P. Haimi, Aliisa S. Siljander, Susanna S. Miettinen, Kirsi M. Tappura, Michael J. Higgins, Gordon G. Wallace
Gordon Wallace
Surface properties and electrical charges are critical factors elucidating cell interactions on biomaterial surfaces. The surface potential distribution and the nanoscopic and microscopic surface elasticity of organic polypyrrole-hyaluronic acid (PPy-HA) were studied by atomic force microscopy (AFM) in a fluid environment in order to explain the observed enhancement in the attachment of human adipose stem cells on positively charged PPy-HA films. The electrostatic force between the AFM tip and a charged PPy-HA surface, the tip-sample adhesion force, and elastic moduli were estimated from the AFM force curves, and the data were fitted to electrostatic double-layer and elastic contact models. The …
Electrically Conductive Coatings Of Nickel And Polypyrrole/Poly(2- Methoxyaniline-5-Sulfonic Acid) On Nylon Lycra® Textiles, B C. Kim, P C. Innis, Gordon G. Wallace, C T.J Low, F C. Walsh, W J. Cho, K H. Yu
Electrically Conductive Coatings Of Nickel And Polypyrrole/Poly(2- Methoxyaniline-5-Sulfonic Acid) On Nylon Lycra® Textiles, B C. Kim, P C. Innis, Gordon G. Wallace, C T.J Low, F C. Walsh, W J. Cho, K H. Yu
Gordon Wallace
Woven nylon Lycra® has been coated with finely-divided electroless nickel-phosphorus, polypyrrole and electroless nickel/polypyrrole to produce flexible and electrically conductive textiles. The coated textiles were tested for their electrochemical activity, electrical resistivity and resistivity in response to mechanical strain. Pre-dyeing the textile with poly(2-methoxyaniline-5-sulfonic acid) (PMAS) prior to electroless metallization by electroless nickel and via chemical polymerization of polypyrrole was found to be beneficial in enhancing the resultant coating as well as stabilizing surface resistance responses when exposed to a wide range of strain. The mass gain due to the nickel coating was found to increase linearly with deposition time. …
Flexible Cellulose Based Polypyrrole-Multiwalled Carbon Nanotube Films For Bio-Compatible Zinc Batteries Activated By Simulated Body Fluids, Sha Li, Zai Ping Guo, Cai Yun Wang, Gordon G. Wallace, Hua-Kun Liu
Flexible Cellulose Based Polypyrrole-Multiwalled Carbon Nanotube Films For Bio-Compatible Zinc Batteries Activated By Simulated Body Fluids, Sha Li, Zai Ping Guo, Cai Yun Wang, Gordon G. Wallace, Hua-Kun Liu
Gordon Wallace
This work aims to develop biocompatible non-toxic materials for implantable bio-electronic cells. Polypyrrole (PPy)–carbon nanotube (CNT) composites with varied ratios of PPy to CNTs were chemically synthesized and used as cathodes with the support of cellulose paper. Zinc foil was used as the anode material due to its non-toxicity and moderate dissolution rate in aqueous solutions. Simulated body fluids (SBFs) with various protein concentrations were applied as electrolytes in this battery system. The PPy–CNT|Zn cell is capable of being discharged up to 24.5 hours at a current density of 60 μA cm−2 in a protein free SBF. The batteries have …
Surface Modification Of Polypyrrole/Biopolymer Composites For Controlled Protein And Cellular Adhesion, Paul J. Molino, Binbin Zhang, Gordon G. Wallace, Timothy Hanks
Surface Modification Of Polypyrrole/Biopolymer Composites For Controlled Protein And Cellular Adhesion, Paul J. Molino, Binbin Zhang, Gordon G. Wallace, Timothy Hanks
Gordon Wallace
The ability to control the interaction between proteins and cells with biomaterials is critical for the effective application of materials for a variety of biomedical applications. Herein, the surface modification of the biological dopant dextran sulphate-doped polypyrrole (PPy-DS) with poly(ethylene glycol) to generate a biomaterial interface that is highly resistant to protein and cellular adhesion is described. Thiolated poly(ethylene glycol) (PEG-thiol) was covalently bound to PPy-DS backbone via a thiol-ene reaction. The surface resistance to an extracellular matrix protein fibronectin increased with increasing molecular weight and concentration of PEG-thiol, and was further optimised via increasing the reaction temperature and the …
Intrinsically Stretchable Supercapacitors Composed Of Polypyrrole Electrodes And Highly Stretchable Gel Electrolyte, Chen Zhao, Caiyun Wang, Zhilian Yue, Kewei Shu, Gordon G. Wallace
Intrinsically Stretchable Supercapacitors Composed Of Polypyrrole Electrodes And Highly Stretchable Gel Electrolyte, Chen Zhao, Caiyun Wang, Zhilian Yue, Kewei Shu, Gordon G. Wallace
Gordon Wallace
There has been an emerging interest in stretchable power sources compatible with flexible/wearable electronics. Such power sources must be able to withstand large mechanical strains and still maintain function. Here we report a highly stretchable H3PO4-poly(vinyl alcohol) (PVA) polymer electrolyte obtained by optimizing the polymer molecular weight and its weight ratio to H3PO4 in terms of conductivity and mechanical properties. The electrolyte demonstrates a high conductivity of 3.4 x 10-3 S cm-1, and a high fracture strain at 410% elongation. It is mechanically robust with a tensile strength of 2 MPa and a Young's modulus of 1 MPa, and displays …
Evaluation Of Encapsulating Coatings On The Performance Of Polypyrrole Actuators, Sina Naficy, Nicholas Stoboi, Philip G. Whitten, Geoffrey M. Spinks, Gordon G. Wallace
Evaluation Of Encapsulating Coatings On The Performance Of Polypyrrole Actuators, Sina Naficy, Nicholas Stoboi, Philip G. Whitten, Geoffrey M. Spinks, Gordon G. Wallace
Gordon Wallace
Conjugated polymer actuators are electroactive materials capable of generating force and movement in response to an applied external voltage. Many potential biomedical and industrial applications require these actuators to operate in a liquid environment. However, immersion of uncoated conducting polymer actuators in non-electrolyte liquids greatly reduces their operating lifetime. Here, we demonstrate the use of spray coating as an effective and simple method to encapsulate polypyrrole (PPy) tri-layer bending actuators. Poly(styrene-b-isobutylene-b-styrene) (SIBS) was used as an encapsulating, compliant spray coating on PPy actuators. A significant enhancement in actuator lifetime in both air and water was observed by encapsulating the actuators. …
Electrochemically Synthesized Stretchable Polypyrrole/Fabric Electrodes For Supercapacitor, Binbin Yue, Caiyun Wang, Xin Ding, Gordon G. Wallace
Electrochemically Synthesized Stretchable Polypyrrole/Fabric Electrodes For Supercapacitor, Binbin Yue, Caiyun Wang, Xin Ding, Gordon G. Wallace
Gordon Wallace
Wearable electronics offer the combined advantages of both electronics and fabrics. Being an indispensable part of these electronics, lightweight, stretchable and wearable power sources are strongly demanded. Here we describe a daily-used cotton fabric coated with polypyrrole as electrode for stretchable supercapacitors. Polypyrrole was synthesized on the Au coated fabric via an electrochemical polymerization process with p-toluenesulfonic acid (p-TS) as dopant from acetonitrile solution. This material was characterized with FESEM, tensile stress, and studied as a supercapacitor electrode in 1.0 M NaCl. This conductive textile electrode can sustain up to 140% strain without electric failure. It delivers a high specific …
A Battery Composed Of A Polypyrrole Cathode And A Magnesium Alloy Anode-Toward A Bioelectric Battery, Yong Kong, Caiyun Wang, Yang Yang, Chee O. Too, Gordon G. Wallace
A Battery Composed Of A Polypyrrole Cathode And A Magnesium Alloy Anode-Toward A Bioelectric Battery, Yong Kong, Caiyun Wang, Yang Yang, Chee O. Too, Gordon G. Wallace
Gordon Wallace
A bioelectric battery can be implanted into the human body and relies on oxygen in the internal body fluid to produce electrical energy. In this work, a battery that uses polypyrrole doped with a biological polyelectrolyte (dextran sulfate, an anti-coagulant) as the cathode and bioresorbable Mg alloy (AZ61) as the anode was developed. This battery exhibited a discharge capacity of 565 mA h g-1 in phosphate buffered saline (PBS, pH = 7.4), a commonly used electrolyte in biological research; offering a specific energy density of similar to 790W h kg-1. The electrochemical properties of the cathode, anode and battery itself …
The Mechanical And The Electrical Properties Of Conducting Polypyrrole Fibers, Javad Foroughi, Shaban R. Ghorbani, Germanas Peleckis, Geoffrey M. Spinks, Gordon G. Wallace, Xiaolin Wang, S X. Dou
The Mechanical And The Electrical Properties Of Conducting Polypyrrole Fibers, Javad Foroughi, Shaban R. Ghorbani, Germanas Peleckis, Geoffrey M. Spinks, Gordon G. Wallace, Xiaolin Wang, S X. Dou
Gordon Wallace
The mechanical and the electrical properties of polypyrrole (PPy) fibers and electrochemically deposited PPy films were studied. It was found that the PPy fibers showed a significantly higher strength than the PPy films due to better orientation of the molecular structure. The electrochemically prepared PPy films had a higher electrical conductivity than that of the fibers at high temperature. At low temperature, the PPy fibers showed the higher conductivity. The conductivity results were analyzed in the frame of the three-dimensional variable range hopping model. The results showed that at room temperature the average hopping distance for the fibers was about …
Polypyrrole Coated Nylon Lycra Fabric As Stretchable Electrode For Supercapacitor Applications, Binbin Yue, Caiyun Wang, Xin Ding, Gordon G. Wallace
Polypyrrole Coated Nylon Lycra Fabric As Stretchable Electrode For Supercapacitor Applications, Binbin Yue, Caiyun Wang, Xin Ding, Gordon G. Wallace
Gordon Wallace
Wearable electronics offer the combined advantages of both electronics and fabrics. Being an indispensable part of these electronics, lightweight, stretchable and wearable power sources are strongly demanded. Here we describe a daily-used nylon lycra fabric coated with polypyrrole as electrode for stretchable supercapacitors. Polypyrrole was synthesized on the fabric via a simple chemical polymerization process with ammonium persulfate (APS) as an oxidant and naphthalene-2,6-disulfonic acid disodium salt (Na2NDS) as a dopant. This material was characterized with FESEM, FTIR, tensile stress, and studied as a supercapacitor electrode in 1.0 M NaCl. This conductive textile could endure 1000 stretching cycles with 100% …
Electrocatalytic Reduction Of Carbon Dioxide By Cobalt-Phthalocyanine-Incorporated Polypyrrole, Jun Chen, Gordon G. Wallace, Jiaxing Lu, Aijian Zhang, Weimin Zhang
Electrocatalytic Reduction Of Carbon Dioxide By Cobalt-Phthalocyanine-Incorporated Polypyrrole, Jun Chen, Gordon G. Wallace, Jiaxing Lu, Aijian Zhang, Weimin Zhang
Gordon Wallace
In the quest for catalysts for the electrocatalytic reduction of , a cobalt phthalocyanine/polypyrrole (CoPc/PPy) composite electrode has been developed. The electrode is prepared by drop casting CoPc onto the PPy film from the CoPc/tetrahydrofuran solution (1 mg/mL). The onset potential for reduction occurred at potentials 160 mV more positive than observed with a simple PPy electrode. Furthermore, in the potentiostatic electrolysis, the catalytic current for reduction at CoPc/PPy was very stable, with a higher current density and current efficiency when compared to the PPy electrode.
Polypyrrole Stretchable Actuators, Wen Zheng, Gursel Alici, Phillip R. Clingan, Bridget Munro, Geoffrey M. Spinks, Julie R. Steele, Gordon G. Wallace
Polypyrrole Stretchable Actuators, Wen Zheng, Gursel Alici, Phillip R. Clingan, Bridget Munro, Geoffrey M. Spinks, Julie R. Steele, Gordon G. Wallace
Gordon Wallace
Here, we report a simple way to prepare stretchable polypyrrole (PPy)-based actuator materials that can be operated over a wide dynamic strain range and generate useable actuation displacements and pressures. The stretchable actuators were prepared as a laminated composite of PPy and a gold-coated roughened rubber sheet. By manipulating the corrugated surface of the rubber substrate, the stretchability of PPy was greatly improved. Gold-coated rubbers could be stretched to 30 percent without significant change in electrical resistance. The corrugated PPy/gold/rubber laminates successfully showed - 1 percents of actuation strain even when prestretched to 24 percent. The actuation strains were smaller …
Gellan Gum Doped Polypyrrole Neural Prosthetic Electrode Coatings, Thomas M. Higgins, Simon E. Moulton, Kerry J. Gilmore, Gordon G. Wallace, Marc In Het Panhuis
Gellan Gum Doped Polypyrrole Neural Prosthetic Electrode Coatings, Thomas M. Higgins, Simon E. Moulton, Kerry J. Gilmore, Gordon G. Wallace, Marc In Het Panhuis
Gordon Wallace
Surface modification of neural prosthetic electrodes with polymeric materials, in particular, conducting polymers and hydrogels, has the potential to circumvent many problems associated with currently used electrode platforms. These problems include the disparity in mechanical properties between implanted electrodes and host neural tissue and the lack of biofunctionality at the electrode surface, both of which dissuade favourable reception of the implanted device. We have developed conducting polymer electrode coatings doped with the polysaccharide gellan gum, as a platform for improved functionality of neural prosthetic electrodes. Our electrode coatings, prepared by galvanostatic electropolymerisation, significantly reduced the impedance magnitude at frequencies relevant …
6 Ghz Microstrip Patch Antennas With Pedot And Polypyrrole Conducting Polymers, Akhilesh Verma, Bo Weng, Roderick L. Shepherd, Christophe Fumeaux, Van Tan Truong, Gordon G. Wallace, Bevan D. Bates
6 Ghz Microstrip Patch Antennas With Pedot And Polypyrrole Conducting Polymers, Akhilesh Verma, Bo Weng, Roderick L. Shepherd, Christophe Fumeaux, Van Tan Truong, Gordon G. Wallace, Bevan D. Bates
Gordon Wallace
Two 6 GHz microstrip patch antennas made from conducting polymers with relatively low DC conductivity such as PEDOT (10000 S/m) and PPy (2000 S/m) are presented. The performance of these patch antennas is compared with a similar copper patch antenna. The results indicate that it is possible to obtain reasonable performance albeit with modest radiation efficiencies. The PEDOT antenna achieved a maximum gain of 2.2 dB, while the PPy antenna reached a gain of 3.8 dB, as against 6.0 dB for a corresponding Cu patch antenna The results confirm the potential of polymer materials for microwave antennas and suggest that …
All-Polymer Battery System Based On Polypyrrole (Ppy)/Para (Toluene Sulfonic Acid) (Pts) And Polypyrrole (Ppy)/Indigo Carmine (Ic) Free Standing Films, Irin Sultana, Md. Mokhlesur Rahman, Jiazhao Wang, Caiyun Wang, Gordon G. Wallace, Hua-Kun Liu
All-Polymer Battery System Based On Polypyrrole (Ppy)/Para (Toluene Sulfonic Acid) (Pts) And Polypyrrole (Ppy)/Indigo Carmine (Ic) Free Standing Films, Irin Sultana, Md. Mokhlesur Rahman, Jiazhao Wang, Caiyun Wang, Gordon G. Wallace, Hua-Kun Liu
Gordon Wallace
In this study, we introduce a novel all-polymer battery system based on conducting polymer (polypyrrole, PPy) doped with dopants of para (toluene sulfonic acid) (pTS) and indigo carmine (IC), respectively. The performance of the systems consisting of polypyrrole-para (toluene sulfonic acid) (PPy-pTS) as cathode and polypyrrole-indigo carmine (PPy-IC) as anode in conjunction with either a polymer based electrolyte or a commercial organic electrolyte of 1M LiPF6 in a 50:50 (v/v) mixture of ethylene carbonate (EC) and dimethyl carbonate (DMC) was evaluated. In the system, all the free-standing PPy-pTS and PPy-IC films were directly used without needing any metal substrate support …
The Role Of Unbound Oligomers In The Nucleation And Growth Of Electrodeposited Polypyrrole And Method For Preparing High Strength, High Conductivity Films, Wen Zheng, Joselito M. Razal, Geoffrey M. Spinks, Van-Tan Truong, Philip G. Whitten, Gordon G. Wallace
The Role Of Unbound Oligomers In The Nucleation And Growth Of Electrodeposited Polypyrrole And Method For Preparing High Strength, High Conductivity Films, Wen Zheng, Joselito M. Razal, Geoffrey M. Spinks, Van-Tan Truong, Philip G. Whitten, Gordon G. Wallace
Gordon Wallace
Polypyrrole is a material with immensely useful properties suitable for a wide range of electrochemical applications, but its development has been hindered by cumbersome manufacturing processes. Here we show that a simple modification to the standard electrochemical polymerization method produces polypyrrole films of equivalently high conductivity and superior mechanical properties in one-tenth of the polymerization time. Preparing the film as a series of electrodeposited layers with thorough solvent washing between layering was found to produce excellent quality films even when layer deposition was accelerated by high current. The washing step between the sequentially polymerized layers altered the deposition mechanism, eliminating …
Sensor Response Of Polypyrrole Trilayer Benders As A Function Of Geometry, Stephen John, Gursel Alici, Geoffrey M. Spinks, John D. W. Madden, Gordon G. Wallace
Sensor Response Of Polypyrrole Trilayer Benders As A Function Of Geometry, Stephen John, Gursel Alici, Geoffrey M. Spinks, John D. W. Madden, Gordon G. Wallace
Gordon Wallace
Trilayer polypyrrole benders are capable of generating voltages and currents when applied with an external force or displacement, demonstrating potential as mechanical sensors. Previous work has identified the effects of dopant and electrolyte on the sensor output, and a 'deformation induced ion flux' model was proposed. The current work aims to identify the change in sensor response with input amplitude and bender geometry as a function of frequency. The current and charge output from the trilayer benders were found to increase proportionally with input displacement and bender strain for multiple input frequencies, indicating linearity. Sensitivities of the current and charge …
Comparative Displacement Study Of Bilayer Actuators Comprising Of Conducting Polymers, Fabricated From Polypyrrole, Poly(3,4- Ethylenedioxythiophene) Or Poly(3,4-Propylenedioxythiophene), Babita Gaihre, Syed Ashraf, Geoffrey M. Spinks, Peter C. Innis, Gordon G. Wallace
Comparative Displacement Study Of Bilayer Actuators Comprising Of Conducting Polymers, Fabricated From Polypyrrole, Poly(3,4- Ethylenedioxythiophene) Or Poly(3,4-Propylenedioxythiophene), Babita Gaihre, Syed Ashraf, Geoffrey M. Spinks, Peter C. Innis, Gordon G. Wallace
Gordon Wallace
The stress gradient generated due to electrochemical oxidation/reduction of a conducting polymer in a bilayer actuator causes a bending movement. Here we report a comparative study of the displacement of bilayer actuators prepared using different conducting polymers. The effects of conducting polymers obtained from electrochemical or chemical synthesis route: different polymers (polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) PEDOT and poly(3,3-dihexyl-3-4-dihydro-2H-thieno[3,4b][1,4]-dioxepine [PProDOT(Hx) 2]); and different electrolytes (0.1 M lithium trifluromethanesulfonate/propylenecarbonate (LiTFSI/PC) and 1-ethyl-3-methyl imidazolium trifluromethanesulfonate (EMITFSI)) on the displacement amplitude and displacement patterns of these actuators were investigated and compared. The results indicate that the bilayer actuator consisting of an electrochemically synthesized conducting polymer …