Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Publication Year
Articles 1 - 30 of 48
Full-Text Articles in Physical Sciences and Mathematics
Enhanced Magnetism In Field-Cooled [Ni80fe20/Mn]3 Multilayers Studied Using Polarized Neutron Reflectometry, W Uilhoorn, S J. Callori, David L. Cortie, Hui-Chia Su, Y Khaydukov, Ko-Wei Lin, Frank Klose
Enhanced Magnetism In Field-Cooled [Ni80fe20/Mn]3 Multilayers Studied Using Polarized Neutron Reflectometry, W Uilhoorn, S J. Callori, David L. Cortie, Hui-Chia Su, Y Khaydukov, Ko-Wei Lin, Frank Klose
Australian Institute for Innovative Materials - Papers
Here, the interfacial magnetic coupling in an exchange biased [Ni80Fe20/Mn]3 multilayer system has been studied using polarized neutron re ectometry. Previous results on this system indicate the importance of the coupling between the Fe-Mn and Ni-Mn orbitals at the layer interfaces. Magnetic depth profiles of the multilayer were measured at low temperatures under field-cooled and zero-field-cooled conditions. While no definitive interfacial state was found, a magnetic moment enhancement of roughly 20-30% in the applied field direction was observed throughout the bulk of the NiFe layers in the field-cooled state as compared to the zero-field-cooled measurements. The origin of this enhancement …
Ferroelectric And Magnetic Properties Of Aurivillius Bim+1ti3fem−3o3m+3 Thin Films, Tingting Jia, Hideo Kimura, Zhenxiang Cheng, Hongyang Zhao
Ferroelectric And Magnetic Properties Of Aurivillius Bim+1ti3fem−3o3m+3 Thin Films, Tingting Jia, Hideo Kimura, Zhenxiang Cheng, Hongyang Zhao
Australian Institute for Innovative Materials - Papers
Aurivillius Bim+1Ti3Fem−3O3m+3 (m = 4, 5, 6) thin films have been deposited by a pulsed laser deposition system. The x-ray diffraction patterns indicate the formation of orthorhombic phase. The remanent polarization (2Pr) of Bim+1Ti3Fem−3O3m+3 thin films is decreased with the m-number. Positive-up-negative-down measurements indicate the presence of ferroelectric (FE) polarization in as-obtained thin films. Piezoresponse force microscopy investigations confirm the existence of FE domains and the switchable polarization. Weak magnetic moment is detected in the Aurivillius films at room temperature. The present work …
Delocalized Surface State In Epitaxial Si(111) Film With Spontaneous √3 X √3 Superstructure, Jian Chen, Yi Du, Zhi Li, Wenbin Li, Baojie Feng, Jinlan Qiu, Peng Cheng, S X. Dou, Lan Chen, Ke-Hui Wu
Delocalized Surface State In Epitaxial Si(111) Film With Spontaneous √3 X √3 Superstructure, Jian Chen, Yi Du, Zhi Li, Wenbin Li, Baojie Feng, Jinlan Qiu, Peng Cheng, S X. Dou, Lan Chen, Ke-Hui Wu
Australian Institute for Innovative Materials - Papers
The " multilayer silicene" films were grown on Ag(111), with increasing thickness above 30 monolayers (ML). Scanning tunneling microscopy (STM) observations suggest that the " multilayer silicene" is indeed a bulk-like Si(111) film with a (√ 3 x √ 3)R30° honeycomb superstructure on surface. The possibility for formation of Si(111)(√ 3 x √ 3)R30°-Ag reconstruction on the surface can be distinctively ruled out by peeling off the surface layer with the STM tip. On this surface, delocalized surface state as well as linear energy-momentum dispersion was observed from quasiparticle interference patterns. Our results indicate that a bulklike silicon film with …
3d Fe2(Moo4)3 Microspheres With Nanosheet Constituents As High-Capacity Anode Materials For Lithium-Ion Batteries, Hao Zheng, Shiqiang Wang, Jiazhao Wang, Jun Wang, Lin Li, Yun Yang, Chuanqi Feng, Ziqi Sun
3d Fe2(Moo4)3 Microspheres With Nanosheet Constituents As High-Capacity Anode Materials For Lithium-Ion Batteries, Hao Zheng, Shiqiang Wang, Jiazhao Wang, Jun Wang, Lin Li, Yun Yang, Chuanqi Feng, Ziqi Sun
Australian Institute for Innovative Materials - Papers
Three-dimensional (3D) Fe2(MoO4)3 microspheres with ultrathin nanosheet constituents are first synthesized as anode materials for the lithium-ion battery. It is interesting that the single-crystalline nanosheets allow rapid electron/ion transport on the inside, and the high porosity ensures fast diffusion of liquid electrolyte in energy storage applications. The electrochemical properties of Fe2(MoO4)3 as anode demonstrates that 3D Fe2(MoO4)3 microspheres deliver an initial capacity of 1855 mAh/g at a current density of 100 mA/g. Particularly, when the current density is increased to 800 mA/g, the reversible capacity of Fe2(MoO4)3 anode still arrived at 456 mAh/g over 50 cycles. The large and reversible …
An Investigation Of The Nanomechanical Properties Of 0.5ba(Ti0.8zr0.2)O3-0.5(Ba0.7ca0.3)Tio3 Thin Films, Zhong-Lan Cai, Zeng-Mei Wang, Huan-Huan Wang, Zhenxiang Cheng, Baowen Li, Xin-Li Guo, Hideo Kimura, Akira Kasahara
An Investigation Of The Nanomechanical Properties Of 0.5ba(Ti0.8zr0.2)O3-0.5(Ba0.7ca0.3)Tio3 Thin Films, Zhong-Lan Cai, Zeng-Mei Wang, Huan-Huan Wang, Zhenxiang Cheng, Baowen Li, Xin-Li Guo, Hideo Kimura, Akira Kasahara
Australian Institute for Innovative Materials - Papers
For practical application, the functional piezoelectric film in microelectromechanical systems should meet the requirement of physical properties, as well as the mechanical properties. In this article, 0.5Ba(Ti0.8Zr0.2)O3-0.5(Ba0.7Ca0.3)TiO3 (0.5BZT-0.5BCT) thin films with varied properties were prepared on (100) Si substrates via a sol-gel technique at different annealing temperatures. The effects of the annealing temperature on the morphology, piezoelectricity, hardness, and elastic modulus were studied. Particular attention was paid to the surface frictional behavior of films, and the changes in the friction force can be radically explained in terms of differences in the hardness/elastic modulus ratio and the residual stress of films. …
Poly(3,4-Ethylenedioxythiophene): Dextran Sulfate (Pedot: Ds) - A Highly Processable Conductive Organic Biopolymer, David Harman, Robert Gorkin Iii, Leo Stevens, Brianna Thompson, Klaudia Wagner, Bo Weng, Johnson Chung, Marc In Het Panhuis, Gordon G. Wallace
Poly(3,4-Ethylenedioxythiophene): Dextran Sulfate (Pedot: Ds) - A Highly Processable Conductive Organic Biopolymer, David Harman, Robert Gorkin Iii, Leo Stevens, Brianna Thompson, Klaudia Wagner, Bo Weng, Johnson Chung, Marc In Het Panhuis, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
A novel water-dispersible conducting polymer analogous to poly(3,4-dioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been chemically synthesized in a single reaction in high yield. PEDOT:DS, a new member of the polythiophene family, is composed of a complex between PEDOT and the sulfonated polysaccharide polyanion dextran sulfate. Drop-cast films of aqueous suspensions of the material display a native conductivity of up to 7 ± 1 S cm-1, increasing to 20 ± 2 S cm-1 after treatment with ethylene glycol and thermal annealing. Mass ratios of the precursors NaDS and EDOT were varied from 5:1 to 2:1 and a decrease in the …
A Class Of Rare Antiferromagnetic Metallic Oxides: Double Perovskite Amn(3)V(4)O(12) (A = Na+, Ca2+, And La3+) And The Site-Selective Doping Effect, Guangbiao Zhang, Yuan Xu Wang, Zhenxiang Cheng, Yuli Yan, Chengxiao Peng, Chao Wang, Shuai Dong
A Class Of Rare Antiferromagnetic Metallic Oxides: Double Perovskite Amn(3)V(4)O(12) (A = Na+, Ca2+, And La3+) And The Site-Selective Doping Effect, Guangbiao Zhang, Yuan Xu Wang, Zhenxiang Cheng, Yuli Yan, Chengxiao Peng, Chao Wang, Shuai Dong
Australian Institute for Innovative Materials - Papers
We have investigated the structural, electronic, and magnetic properties of A-site-ordered double-perovskitestructured oxides, AA'3B4O12 (A = Na, Ca, and La) with Mn and V at A' and B sites, respectively, using firstprinciple calculations based on the density functional theory. Our calculation results show that the antiferromagnetic phase is the ground state for all the compounds. By changing the A-site ions from Na+ to Ca2+ and then to La3+, the transfer of charge between Mn and O ions was changed from 1.56 to 1.55 and then to 1.50, and that between the …
Terahertz Probes Of Magnetic Field Induced Spin Reorientation In Yfeo 3 Single Crystal, Xian Lin, Junjie Jiang, Zuanming Jin, Dongyang Wang, Zhen Tian, Jiaguang Han, Zhenxiang Cheng, Guohong Ma
Terahertz Probes Of Magnetic Field Induced Spin Reorientation In Yfeo 3 Single Crystal, Xian Lin, Junjie Jiang, Zuanming Jin, Dongyang Wang, Zhen Tian, Jiaguang Han, Zhenxiang Cheng, Guohong Ma
Australian Institute for Innovative Materials - Papers
Using the terahertz time-domain spectroscopy, we demonstrate the spin reorientation of a canted antiferromagnetic YFeO3 single crystal, by evaluating the temperature and magnetic field dependence of resonant frequency and amplitude for the quasi-ferromagnetic (FM) and quasi-antiferromagnetic modes (AFM), a deeper insight into the dynamics of spin reorientation in rare-earth orthoferrites is established. Due to the absence of 4f-electrons in Y ion, the spin reorientation of Fe sublattices can only be induced by the applied magnetic field, rather than temperature. In agreement with the theoretical predication, the frequency of FM mode decreases with magnetic field. In addition, an …
Na3v2(Po4)3 Particles Partly Embedded In Carbon Nanofibers With Superb Kinetics For Ultra-High Power Sodium Ion Batteries, Junghoon Yang, Dongwook Han, Mi Ru Jo, Kyeongse Song, Yongil Kim, Shulei Chou, Hua-Kun Liu, Yong-Mook Kang
Na3v2(Po4)3 Particles Partly Embedded In Carbon Nanofibers With Superb Kinetics For Ultra-High Power Sodium Ion Batteries, Junghoon Yang, Dongwook Han, Mi Ru Jo, Kyeongse Song, Yongil Kim, Shulei Chou, Hua-Kun Liu, Yong-Mook Kang
Australian Institute for Innovative Materials - Papers
We here describe the extraordinary performance of NASICON Na3V2(PO4)3-carbon nanofiber (NVP-CNF) composites with ultra-high power and excellent cycling performance. NVP-CNFs are composed of CNFs at the center part and partly embedded NVP nanoparticles in the shell. We first report this unique morphology of NVP-CNFs for the electrode material of secondary batteries as well as for general energy conversion materials. Our NVP-CNFs show not only a high discharge capacity of approx. 88.9 mA h g-1 even at a high current density of 50 C but also approx. 93% cyclic retention property after …
Large Scale Production Of Novel G-C3n4 Micro Strings With High Surface Area And Versatile Photodegradation Ability, Muhammad Nawaz Tahir, Chuanbao Cao, Faheem K. Butt, Sajid Butt, Faryal Idrees, Zulfiqar Ali, Imran Aslam, M Tanveer, Asif Mahmood, Nasir Mahmood
Large Scale Production Of Novel G-C3n4 Micro Strings With High Surface Area And Versatile Photodegradation Ability, Muhammad Nawaz Tahir, Chuanbao Cao, Faheem K. Butt, Sajid Butt, Faryal Idrees, Zulfiqar Ali, Imran Aslam, M Tanveer, Asif Mahmood, Nasir Mahmood
Australian Institute for Innovative Materials - Papers
An easy, scalable and environmentally benign chemical method has been developed to synthesize micro strings of graphitic-C3N4 (msg-C3N4) through pre-treatment of melamine with HNO 3 in alkaline solvent at low temperature. This methodology results in a unique string type morphology of msg-C3N4 with higher surface area. These msg-C3N4 micro strings were used as a photocatalyst under visible light for photodegradation of rhodamine B, methyl blue and methyl orange. The msg-C3N4 shows enhanced photodegradation efficiency due to its high surface area and favourable bandgap. The first order rate constant for msg-C3N4 was measured which confirms the higher performance of msg-C3N4 in …
Hydrostatic Piezoelectric Properties Of [011] Poled Pb(Mg 1/3nb2/3)O3-Pbtio3 Single Crystals And 2-2 Lamellar Composites, Lili Li, Shujun Zhang, Zhuo Xu, Xuecang Geng, Fei Wen, Jun Luo, Thomas R. Shrout
Hydrostatic Piezoelectric Properties Of [011] Poled Pb(Mg 1/3nb2/3)O3-Pbtio3 Single Crystals And 2-2 Lamellar Composites, Lili Li, Shujun Zhang, Zhuo Xu, Xuecang Geng, Fei Wen, Jun Luo, Thomas R. Shrout
Australian Institute for Innovative Materials - Papers
The hydrostatic piezoelectric properties of [011] poled Pb(Mg 1/3Nb2/3)O3-PbTiO3 (PMN-PT) crystals and corresponding 2-2 crystal/epoxy composites were investigated. The crystal volume ratio and compositional dependencies of the hydrostatic charge and voltage coefficients (dh and gh) and hydrostatic figure of merit (FOM) dh x gh were determined, where large FOM value of 3.2 pm2/N with high stability as a function of hydrostatic pressure was achieved for rhombohedral crystal composites. In addition, the stress amplification effects of the face-plate and different epoxy matrixes were investigated, with maximum FOM value being on the order of 92 pm2/N, indicating that 2-2 crystal/epoxy composites are …
Three-Dimensional-Network Li3v2(Po4) 3/C Composite As High Rate Lithium Ion Battery Cathode Material And Its Compatibility With Ionic Liquid Electrolytes, Jiantie Xu, Shulei Chou, Cuifeng Zhou, Qinfen Gu, Hua-Kun Liu, S X. Dou
Three-Dimensional-Network Li3v2(Po4) 3/C Composite As High Rate Lithium Ion Battery Cathode Material And Its Compatibility With Ionic Liquid Electrolytes, Jiantie Xu, Shulei Chou, Cuifeng Zhou, Qinfen Gu, Hua-Kun Liu, S X. Dou
Australian Institute for Innovative Materials - Papers
A high performance Li3V2(PO4)3 cathode material for lithium ion batteries was synthesized by the microwave-assisted hydrothermal method followed by a post annealing process. The synchrotron X-ray diffraction analysis results confirmed that single-phase Li3V2(PO4)3 with monoclinic structure was obtained. Scanning electron microscope and transmission electron microscope images revealed that the as-prepared Li3V 2(PO4)3 was composed of nanowires and microsized particles. Electrochemical results demonstrated that the Li 3V2(PO4)3 electrode measured at 10 C after 500 cycles can deliver discharge capacities of 85.4 mAh g-1 and 103.4 mAh g-1, with a capacity retention of 99.3% and 95.9%, in the voltage ranges of 3.0-4.3 …
3-Dimensional (3d) Fabricated Polymer Based Drug Delivery Systems, Simon Moulton, Gordon G. Wallace
3-Dimensional (3d) Fabricated Polymer Based Drug Delivery Systems, Simon Moulton, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Drug delivery from 3-dimensional (3D) structures is a rapidly growing area of research. It is essential to achieve structures wherein drug stability is ensured, the drug loading capacity is appropriate and the desired controlled release profile can be attained. Attention must also be paid to the development of appropriate fabrication machinery that allows 3D drug delivery systems (DDS) to be produced in a simple, reliable and reproducible manner. The range of fabrication methods currently being used to form 3D DDSs include electrospinning (solution and melt), wet-spinning and printing (3-dimensional). The use of these techniques enables production of DDSs from the …
Synthesis Of Potential Theranostic System Consisting Of Methotrexate-Immobilized (3-Aminopropyl)Trimethoxysilane Coated Α-Bi2o3 Nanoparticles For Cancer Treatment, Kathrin Bogusz, Moeava Tehei, Callum Stewart, Marjorie Mcdonald, Dean Cardillo, Michael Lerch, Stephanie Corde, Anatoly Rosenfeld, Hua-Kun Liu, Konstantin Konstantinov
Synthesis Of Potential Theranostic System Consisting Of Methotrexate-Immobilized (3-Aminopropyl)Trimethoxysilane Coated Α-Bi2o3 Nanoparticles For Cancer Treatment, Kathrin Bogusz, Moeava Tehei, Callum Stewart, Marjorie Mcdonald, Dean Cardillo, Michael Lerch, Stephanie Corde, Anatoly Rosenfeld, Hua-Kun Liu, Konstantin Konstantinov
Australian Institute for Innovative Materials - Papers
In this study we present the synthesis of a new theranostic system consisting of a core-shell structured nanoceramic-drug conjugate that can potentially combine chemotherapeutic, targeting, diagnostic and radio dose enhancing features in cancer treatment. The conjugate is made of α-Bi2O3 nanoparticles (NPs) which were first coated with (3-aminopropyl)trimethoxysilane (APTMS) to form a core-shell structure and then attached with methotrexate (MTX) through amidation between the amine moieties on the shell and the carboxylic acid groups on MTX. While α-Bi2O3 NPs with high effective atomic number can serve as both contrast agent and radiosensitiser in dose enhancement radiation therapy, MTX as an …
Polarization Alignment, Phase Transition, And Piezoelectricity Development In Polycrystalline 0.5ba(Zr0.2 Ti0.8)O3-0.5(Ba0.7 Ca0.3)Tio3, Hanzheng Guo, Brian K. Voas, Shujun Zhang, Chao Zhou, Xiaobing Ren, Scott P. Beckman, Xiaoli Tan
Polarization Alignment, Phase Transition, And Piezoelectricity Development In Polycrystalline 0.5ba(Zr0.2 Ti0.8)O3-0.5(Ba0.7 Ca0.3)Tio3, Hanzheng Guo, Brian K. Voas, Shujun Zhang, Chao Zhou, Xiaobing Ren, Scott P. Beckman, Xiaoli Tan
Australian Institute for Innovative Materials - Papers
The microstructural origin of the exceptionally high piezoelectric response of polycrystalline 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 is investigated using in situ transmission electron microscopy, in addition to a wide variety of bulk measurements and first-principles calculations. A direct correlation is established relating a domain wall-free state to the ultrahigh piezoelectric d33 coefficient in this BaTiO3-based composition. The results suggest that the unique single-domain state formed during electrical poling is a result of a structural transition from coexistent rhombohedral and tetragonal phases to an orthorhombic phase that has an anomalously low elastic modulus. First-principles calculations indicate that incorporating Ca2+ and Zr4+ into BaTiO3 reduces the …
2-(10′,10′-Dimethyl-3′-Sulfanylidene-4′- Azatricyclo[5.2.1.01,5]Decan-2′-Yl)-10,10-Dimethyl-4- Azatricyclo[5.2.1.01,5]Decane-3-Thione, Ashley Walker, Craig M. Forsyth, Patrick Perlmutter
2-(10′,10′-Dimethyl-3′-Sulfanylidene-4′- Azatricyclo[5.2.1.01,5]Decan-2′-Yl)-10,10-Dimethyl-4- Azatricyclo[5.2.1.01,5]Decane-3-Thione, Ashley Walker, Craig M. Forsyth, Patrick Perlmutter
Australian Institute for Innovative Materials - Papers
The title compound, C28H40N2O2S2, was obtained as a minor product from an anti-aldol reaction between the corresponding N-propionylthiolactam and benzaldehyde. The asymmetric unit contains one half-molecule, which is completed by inversion symmetry. The molecule displays a nearly eclipsed conformation along the central C-C bond with a C-C-C-C- torsion angle of 20.4 (3)°.
Direct Observation Of Domain Wall Motion And Novel Dielectric Loss In 0.23pb(In1/2nb1/2)O3-0.42pb(Mg1/3 Nb2/3)O3-0.35pbtio3 Crystals, Dabin Lin, Zhenrong Li, Fei Li, Shujun Zhang
Direct Observation Of Domain Wall Motion And Novel Dielectric Loss In 0.23pb(In1/2nb1/2)O3-0.42pb(Mg1/3 Nb2/3)O3-0.35pbtio3 Crystals, Dabin Lin, Zhenrong Li, Fei Li, Shujun Zhang
Australian Institute for Innovative Materials - Papers
Domain wall motion was directly observed at temperatures near to the monoclinic-to-tetragonal phase transition temperature (TM-T) in [001]-oriented 0.23Pb(In1/2Nb1/2)O3-0. 42Pb(Mg1/3Nb2/3)O3-0.35PbTiO3 (0.23PIN-0.42PMN-0.35PT) single crystals using a polarizing light microscope, and evident 90°and 180°domain switches were observed near the Curie temperature (TC). Two dielectric loss anomalies were observed at temperatures near TM-T in the [001]-oriented PIN-PMN-PT single crystals, while an additional dielectric loss peak was found at temperatures a few degrees below TC, which was associated with domain wall motion. Based on the domain structure observations, a domain switching mechanism was proposed to explain the novel dielectric loss peak at several degrees …
1-3 Piezoelectric Composites For High-Temperature Transducer Applications, Lili Li, Shujun Zhang, Zhuo Xu, Fei Wen, Xuecang Geng, Hyeong Jae Lee, Thomas R. Shrout
1-3 Piezoelectric Composites For High-Temperature Transducer Applications, Lili Li, Shujun Zhang, Zhuo Xu, Fei Wen, Xuecang Geng, Hyeong Jae Lee, Thomas R. Shrout
Australian Institute for Innovative Materials - Papers
High-temperature Pb(Zr,Ti)O3/epoxy 1-3 composites were fabricated using the dice and fill method. The epoxy filler was modified with glass spheres in order to improve the thermal reliability of the composites at elevated temperatures. Temperature-dependent dielectric and electromechanical properties of the composites were measured after ageing at 250 °C with different dwelling times. Obvious cracks were observed and the electrodes were damaged in the composite with unmodified epoxy after 200 h, leading to the failure of the composite. In contrast, composites with >12 vol% glass sphere loaded epoxies were found to exhibit minimal electrical property variation after ageing for 500 h, …
Comparative Displacement Study Of Bilayer Actuators Comprising Of Conducting Polymers, Fabricated From Polypyrrole, Poly(3,4- Ethylenedioxythiophene) Or Poly(3,4-Propylenedioxythiophene), Babita Gaihre, Syed Ashraf, Geoffrey M. Spinks, Peter C. Innis, Gordon G. Wallace
Comparative Displacement Study Of Bilayer Actuators Comprising Of Conducting Polymers, Fabricated From Polypyrrole, Poly(3,4- Ethylenedioxythiophene) Or Poly(3,4-Propylenedioxythiophene), Babita Gaihre, Syed Ashraf, Geoffrey M. Spinks, Peter C. Innis, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
The stress gradient generated due to electrochemical oxidation/reduction of a conducting polymer in a bilayer actuator causes a bending movement. Here we report a comparative study of the displacement of bilayer actuators prepared using different conducting polymers. The effects of conducting polymers obtained from electrochemical or chemical synthesis route: different polymers (polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) PEDOT and poly(3,3-dihexyl-3-4-dihydro-2H-thieno[3,4b][1,4]-dioxepine [PProDOT(Hx) 2]); and different electrolytes (0.1 M lithium trifluromethanesulfonate/propylenecarbonate (LiTFSI/PC) and 1-ethyl-3-methyl imidazolium trifluromethanesulfonate (EMITFSI)) on the displacement amplitude and displacement patterns of these actuators were investigated and compared. The results indicate that the bilayer actuator consisting of an electrochemically synthesized conducting polymer …
In-Situ Observation Of Nanomechanical Behavior Arising From Critical-Temperature-Induced Phase Transformation In Ba(Zr0.2ti 0.8)O3-0.5(Ba0.7ca0.3)Tio 3 Thin Film, Z M. Wang, Zh L. Cai, K Zhao, X L. Guo, J Chen, W Sun, Zh X. Cheng, H Kimura, B Li, G L. Yuan, J Yin, Zh G. Liu
In-Situ Observation Of Nanomechanical Behavior Arising From Critical-Temperature-Induced Phase Transformation In Ba(Zr0.2ti 0.8)O3-0.5(Ba0.7ca0.3)Tio 3 Thin Film, Z M. Wang, Zh L. Cai, K Zhao, X L. Guo, J Chen, W Sun, Zh X. Cheng, H Kimura, B Li, G L. Yuan, J Yin, Zh G. Liu
Australian Institute for Innovative Materials - Papers
In this Letter, we use the nanoindentation technique and vary the testing temperature to above and below critical values to study the nanomechanical features of a strong Pb-free piezoelectric Ba(Zr0.2Ti 0.8)O3-0.5(Ba0.7Ca0.3)TiO 3 (BZT-0.5BCT) thin film across its piezoelectric-optimal morphotropic phase boundary. The mechanisms responsible for the Young's modulus and hardness evolution are then discussed. An X-ray diffraction method that can detect the d(110) variation associated with the change in the inclination angle ψ of the (110) plane was developed to quantify the residual stress in the BZT-0.5BCT films.
Crystallization, Phase Evolution And Ferroelectric Properties Of Sol-Gel-Synthesized Ba(Ti0.8zr0.2)O3- X(Ba0.7ca0.3)Tio3 Thin Films, Zeng-Mei Wang, Kuan Zhao, Xin-Li Guo, Wei Sun, Hua-Long Jiang, Xue-Qin Han, Xu-Tang Tao, Zhen-Xiang Cheng, Hong-Yang Zhao, Hideo Kimura, Guo-Liang Yuan, Jiang Yin, Zhi-Guo Liu
Crystallization, Phase Evolution And Ferroelectric Properties Of Sol-Gel-Synthesized Ba(Ti0.8zr0.2)O3- X(Ba0.7ca0.3)Tio3 Thin Films, Zeng-Mei Wang, Kuan Zhao, Xin-Li Guo, Wei Sun, Hua-Long Jiang, Xue-Qin Han, Xu-Tang Tao, Zhen-Xiang Cheng, Hong-Yang Zhao, Hideo Kimura, Guo-Liang Yuan, Jiang Yin, Zhi-Guo Liu
Australian Institute for Innovative Materials - Papers
A lead-free piezoelectric material with ultra-high properties, Ba(Ti0.8Zr0.2)O3-x(Ba0.7Ca0.3)TiO3(BZT-xBCT) nanocrystals was synthesized via a sol-gel method, and the corresponding thin films were also deposited on Pt/Ti/SiO2/Si substrates by a spin-coating approach. The BZT-xBCT thin film exhibited a high remnant polarization of 22.15 mC cm2 with a large coercive field of 68.06 kV cm1. The resultant gel is calcined at various elevated temperatures and studied with FTIR/XRD/Raman/DSC-TGA/AFM/SEM techniques for gel composition, crystallization, phase transition, thermochemistry and the morphology of the film. Although the room temperature crystal structure of the BZT-xBCT nanocrystals appears to be a standard perovskite structure by conventional X-ray diffraction …
Spin Switching And Magnetization Reversal In Single-Crystal Ndfeo3, S J. Yuan, W Ren, F Hong, Y B. Wang, J C. Zhang, L Bellaiche, S X. Cao, G Cao
Spin Switching And Magnetization Reversal In Single-Crystal Ndfeo3, S J. Yuan, W Ren, F Hong, Y B. Wang, J C. Zhang, L Bellaiche, S X. Cao, G Cao
Australian Institute for Innovative Materials - Papers
We report an experimental and computational study of single-crystal NdFeO3, which features two inequivalent magnetic sublattices, namely, Fe and Nd sublattices that are coupled in an antiparallel fashion. This paper reveals that a strong interaction between 3d and 4f electrons of the two sublattices along with a spin-lattice coupling drives an extremely interesting magnetic state that is highly sensitive to the orientation and history of weak magnetic field. The following phenomena are particularly remarkable: (1) sharply contrasting magnetization M(T) along the a and c axes; (2) a first-order spin switching along the a axis below 29 K when the system …
Tubular Graphitic-C 3 N 4 : A Prospective Material For Energy Storage And Green Photocatalysis, Muhammad Nawaz Tahir, Chuanbao Cao, Faheem K. Butt, Faryal Idrees, Nasir Mahmood, Zulfiqar Ali, Imran Aslam, M Tanveer, Muhammad Rizwan, Tariq Mahmood
Tubular Graphitic-C 3 N 4 : A Prospective Material For Energy Storage And Green Photocatalysis, Muhammad Nawaz Tahir, Chuanbao Cao, Faheem K. Butt, Faryal Idrees, Nasir Mahmood, Zulfiqar Ali, Imran Aslam, M Tanveer, Muhammad Rizwan, Tariq Mahmood
Australian Institute for Innovative Materials - Papers
We have established a facile and scaleable approach to fabricate tubular graphitic-C3N4 using melamine. The construction of the unique tubular morphology is a result of the pre-treatment of melamine with HNO3. Herein, for the first time, we have explored the electrochemical properties of g-C3N4 as an electrode material for supercapacitors. Tubular g-C3N4 has significant advantages due to its distinctive morphology, high surface area (182.61 m2 g-1) and combination of carbon with nitrogen. Therefore, tubular g-C3N4 demonstrated a good specific capacitance of 233 F g-1 at a current density of 0.2 A g-1 in 6 M …
Crystal Growth, Structure And Thermal Properties Of Noncentrosymmetric Single Crystals Prca4o(Bo3)3+, Fapeng Yu, Shujun Zhang, Xiufeng Cheng, Xiulan Duan, Tingfeng Ma, Xian Zhao
Crystal Growth, Structure And Thermal Properties Of Noncentrosymmetric Single Crystals Prca4o(Bo3)3+, Fapeng Yu, Shujun Zhang, Xiufeng Cheng, Xiulan Duan, Tingfeng Ma, Xian Zhao
Australian Institute for Innovative Materials - Papers
Noncentrosymmetric praseodymium calcium oxyborate single crystals, PrCa4O(BO3)3 (PrCOB), were grown by the Czochralski technique. The monoclinic unit cell parameters were found to be a = 8.177 Å, b = 16.157 Å, c = 3.629 Å and Z = 2 with space group Cm. Crystal density was measured using the Archimedes method, being on the order of 3.47 g cm-3. Thermal properties of PrCOB were investigated, where the specific heat was found to be 0.63 J g-1 °C-1 at room temperature, increasing to 0.85 J g-1°C-1 at 700°C. The thermal expansion coefficients were measured to be α11 = 7.99, α22 = …
Gating The Charge State Of Single Fe Dopants In The Topological Insulator Bi 2 Se 3 With A Scanning Tunneling Microscope, Canli Song, Yeping Jiang, Yi-Lin Wang, Zhi Li, Lili Wang, Ke He, Xi Chen, Xu-Cun Ma, Qi-Kun Xue
Gating The Charge State Of Single Fe Dopants In The Topological Insulator Bi 2 Se 3 With A Scanning Tunneling Microscope, Canli Song, Yeping Jiang, Yi-Lin Wang, Zhi Li, Lili Wang, Ke He, Xi Chen, Xu-Cun Ma, Qi-Kun Xue
Australian Institute for Innovative Materials - Papers
Low-temperature scanning tunneling microscope (STM) is exploited to study directly the atomic and electronic structures of single Fe dopants in topological insulator Bi2Se3 thin films. Fe atoms predominantly and isovalently substitute for two distinct Bi sites at the subsurface with charge neutrality. In the vicinity of Fe substitutions, circular depressions in STM topography and sharp rings in spatially resolved conductance map, whose diameters apparently depend on the tunneling conditions, are observed. We show that the phenomena correlate well with the switching between Fe3+ and Fe2+ charge states due to the gate effect of the tunneling tip, as further evidenced by …
Synthesis And Anti-Leukaemic Activity Of Pyrrolo[3,2,1-Hi]Indole-1,2- Diones, Pyrrolo[3,2,1-Ij]Quinoline-1,2-Diones And Other Polycyclic Isatin Derivatives, Lidia Matesic, Julie M. Locke, Kara Vine, Marie Ranson, John B. Bremner, Danielle Skropeta
Synthesis And Anti-Leukaemic Activity Of Pyrrolo[3,2,1-Hi]Indole-1,2- Diones, Pyrrolo[3,2,1-Ij]Quinoline-1,2-Diones And Other Polycyclic Isatin Derivatives, Lidia Matesic, Julie M. Locke, Kara Vine, Marie Ranson, John B. Bremner, Danielle Skropeta
Faculty of Science - Papers (Archive)
To further expand the structure–cytotoxic activity relationships of isatin derivatives and to reduce flexibility in substituent groups at nitrogen, 20 analogues incorporating a ring system between the N1 and C7 atoms of isatin were prepared using a variety of synthetic strategies. This yielded pyrroloindole-, pyrroloquinoline-, pyrroloacridine-, pyrrolophenanthridine- and benzopyrrolophenanthridine-based systems with embedded isatin moieties, the latter possessing a novel carbon skeleton. These compounds were subsequently assessed for their in vitro cytotoxicity against human U937 lymphoma cells, with the brominated pyrroloacridine dione 27 showing the most promising activity (IC50 3.01 μM) after 24 h.
The Magnetic Structure Of An Epitaxial Bimn 0.5fe 0.5o 3 Thin Film On Srtio 3 (001) Studied With Neutron Diffraction, David Laurence Cortie, A Pj Stampfl, F Klose, Y Du, Xiaolin Wang, H Zhao, H Kimura, Z Cheng
The Magnetic Structure Of An Epitaxial Bimn 0.5fe 0.5o 3 Thin Film On Srtio 3 (001) Studied With Neutron Diffraction, David Laurence Cortie, A Pj Stampfl, F Klose, Y Du, Xiaolin Wang, H Zhao, H Kimura, Z Cheng
Australian Institute for Innovative Materials - Papers
High-angle neutron diffraction was used to directly reveal the atomic-scale magnetic structure of a single-crystalline BiMn 0.5 Fe 0.5 O 3 thin film deposited on a SrTiO 3 (001) substrate. The BiMn 0.5 Fe 0.5 O 3 phase exhibits distinctive magnetic properties that differentiate it from both parent compounds: BiFeO 3 and BiMnO 3. A transition to long-range G-type antiferromagnetism was observed below 120 K with a (1 2 1 2 1 2) propagation vector. A weak ferromagnetic behavior was measured at low temperature by superconducting quantum interference device (SQUID) magnetometry. There is no indication of the spin cycloid, known …
Pricing Of Volatility Derivatives Using 3/2-Stochastic Models, Joanna Goard
Pricing Of Volatility Derivatives Using 3/2-Stochastic Models, Joanna Goard
Faculty of Informatics - Papers (Archive)
Analytic solutions are found for prices of both variance and volatility swaps and VIX options under new 3/2- stochastic models for the dynamics of the underlying assets. The main features of the new stochastic differential equations are an empirically validated cv3/2 diffusion term, a nonlinear drift providing a balancing effect of a stronger mean reversion with high volatility, and for the case of the variance and volatility swaps, a free function of time as a moving target in the reversion term, allowing additional flexibility for model calibration against market data.
Bazr(0.8)Y(0.2)O(3-Delta)-Nio Composite Anodic Powders For Proton-Conducting Sofcs Prepared By A Combustion Method, Lei Bi, Emiliana Fabbri, Ziqi Sun, Enrico Traversa
Bazr(0.8)Y(0.2)O(3-Delta)-Nio Composite Anodic Powders For Proton-Conducting Sofcs Prepared By A Combustion Method, Lei Bi, Emiliana Fabbri, Ziqi Sun, Enrico Traversa
Australian Institute for Innovative Materials - Papers
BaZr0.8Y0.2O3-∂ (BZY)-NiO composite powders with different BZY-NiO weight ratios were prepared by a combustion method as anodes for proton-conducting solid oxide fuel cells (SOFCs). After heating to 1100°C for 6 h, the composite powders were made of a well-dispersed mixture of two phases, BZY and NiO. Chemical stability tests showed that the BZY-NiO anodic powders had good stability against CO2, whereas comparative tests under the same conditions showed degradation for BaCe0.7Zr0.1Y0.2O3-∂- NiO, which is at present the most used anode material for proton-conducting …
Inkjet And Extrusion Printing Of Conducting Poly(3,4-Ethylenedioxythiophene) Tracks On And Embedded In Biopolymer Materials, Charles A. Mire, Animesh Agrawal, Gordon G. Wallace, Paul Calvert, Marc In Het Panhuis
Inkjet And Extrusion Printing Of Conducting Poly(3,4-Ethylenedioxythiophene) Tracks On And Embedded In Biopolymer Materials, Charles A. Mire, Animesh Agrawal, Gordon G. Wallace, Paul Calvert, Marc In Het Panhuis
Faculty of Science - Papers (Archive)
Two printing methods, extrusion and inkjet, are used to deposit tracks of PEDOT/PSS conducting polymer onto biopolymer films with a view to prepare implantable tissue mimics containing electronic devices. Extruded tracks offer lower printing resolution, but better electrical characteristics compared to inkjet printed tracks. The biopolymer–ink interaction results in narrower printed tracks compared to those on glass. This affects the final conductivity, which is lower for printed tracks on biopolymer than for lines printed on glass, due to the part of the track lying below the surface. Extrusion printing is used to embed tracks into a biopolymer matrix, resulting in …