Physical Sciences and Mathematics Commons^™

Autotab - Automatic Guitar Tablature Generation, Shaun Boley, Anthony Cisneros, Eric Kauzlarich

Computer Engineering

Our project consists of two different parts:

The first part contains an analysis of various pitch estimation algorithms. A number of different open-source pitch estimation libraries were tested using guitar recordings in order to gauge how accurately and consistently they outputted the correct frequencies. The results showed that the algorithms did not perform up to expectations, especially when testing with guitars with wound strings and within certain frequency ranges.

The second part details the creation of a tablature generator. It reads in a note sequence as an input, then generates tablature in the form of ASCII text. A modified greedy …

Spirit: A Home Automation System, Andrew Choi

Computer Engineering

Spirit is a multi device home automation system. Designed and implemented for California Polytechnic State University’s Senior Project program, this project was worked on during the duration of two school quarters from January 7, 2014 to June 13, 2014. The system consists of monitor/controllers designed to carry out everyday tasks in the average American household and an accompanying mobile application designed to receive information and control the devices. The monitor/controllers, or “Spirits”, are primarily developed using Arduino development tools and Arduino microcontroller boards. The spirits include a thermostat, named Tempus, an electrical outlet, Electrus, and a wall light switch, Luxos.

Numerical Investigation Of Pyrolysis Gas Blowing Pattern And Thermal Response Using Orthotropic Charring Ablative Material, Haoyue Weng, Alexandre Martin

Mechanical Engineering Faculty Publications

An orthotropic material model is implemented in a three-dimensional material response code, and numerically studied for charring ablative material. Model comparison is performed using an iso-Q sample geometry. The comparison is presented using pyrolysis gas streamlines and time series of temperature at selected virtual thermocouples. Results show that orthotropic permeability affects both pyrolysis gas flow and thermal response, but orthotropic thermal conductivity essentially changes the thermal performance of the material. The effect of orthotropic properties may have practical use such that the material performance can be manipulated by altering the angle of orthotropic orientation.

Numerical Study Of Spallation Phenomenon In An Arc-Jet Environment, Raghava Davuluri, Alexandre Martin

Mechanical Engineering Faculty Publications

The spallation phenomenon might affect the aerodynamic heating rates of re-entry vehicles. To investigate spallation effects, a code is developed to compute the dynamics of spalled particles. The code uses a finite-rate chemistry model to study the chemical interactions of the particles with the flow field. The spallation code is one-way coupled to a CFD solver that models the hypersonic flow field around an ablative sample. Spalled particles behavior is numerically studied for argon and air flow field. The chemistry model is compared with that of Park's model which complies with oxidation and sublimation and shows disagreement for nitridation.

Rubidium-Based Atomic Clock, Kate Miles

Physics

In this paper we will explore the process of building an atomic clock from a function generator, go into an in-depth introductory discussion of the Datum LPRO, and examine how rubidium function generators work.

Lightweight Uav Launcher, Ben Miller, Christian Valoria, Corinne Warnock, Jake Coutlee

Mechanical Engineering

This report discusses the design, construction, and testing of a lightweight, portable UAV launcher. There is a current need for a small team of soldiers to launch a US Marine Tier II UAV in a remote location without transport. Research was conducted into existing UAV launcher designs and the pros and cons of each were recorded. This research served as a basis for concept generation during the initial design development stage. It was required that the design weigh less than 110 lbs, occupy a smaller volume than 48" x 24" 18" in its collapsed state, be portable by a single …

Emisja Dioksyn I Furanów Z Procesu Współspalania Paliw Alternatywnych W Piecach Cementowych, Magdalena Kasietczuk, Robert Oleniacz, Marian Mazur

Robert Oleniacz

The chapter discusses the problem of air emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs) from the process of cement clinker production. In the analyzed cement kilns significant amount of fossil fuels is replaced with alternative fuels, mainly waste-derived fuels. Thus, particular attention has been paid to the potential impact on the level of the emissions such factors as type and quantity of used wastes and their ways of introducing into the kiln during co-combustion. The analysis include the results of measurements of PCDD/PCDF concentrations in the flue gases of selected cement kilns and differences in used raw materials, methods of …

Ocena Wpływu Nowo Budowanej Spalarni Odpadów Komunalnych W Krakowie Na Jakość Powietrza Z Wykorzystaniem Modelu Calmet/Calpuff, Mateusz Rzeszutek, Robert Oleniacz

Robert Oleniacz

The chapter presents the results of the evaluation the impact on air quality for the newly built Municipal Solid Waste Thermal Treatment Plant in Krakow (Poland) whose construction started in autumn 2013. Air pollution impact assessment was performed for air emissions adopted at the levels of emission limit values applicable for waste incineration. Modeling of air pollutant dispersion was carried out using the system of CALMET/CALPUFF models. For this purpose, the terrain elevation data from Shuttle Radar Topography Mission (SRTM3) and data of land use from Corine Land Cover 2006 (CLC 2006) were adopted with a resolution of about 100 …

Niekontrolowane Spalanie Odpadów I Pozostałości Roślinnych Na Terenach Wiejskich – Przykład Inwentaryzacji Źródeł Emisji I Oceny Wpływu Na Jakość Powietrza, Robert Oleniacz, Barbara Bacik, Marcelina Spiszak

Robert Oleniacz

The most troublesome air pollutant emissions that occur in rural areas are associated with the operation of domestic furnaces (mainly during the heating season) and the processes of open burning of plant residues (mainly outside the heating season). The paper presents an example of emission inventory for this type of sources in two submontane villages of Małopolska Voivodeship (Poland) based on the results of the questionnaire survey and an attempt to assess the impact on air quality of these sources, including the potential uncontrolled burning of waste.The conducted questionnaire survey showed the use to home heating mainly solid fuels (first …

The Differences Are Not So Great: High Altitude Balloon And Small Spacecraft Software Development, Jeremy Straub, Ronald Marsh

Jeremy Straub

Previous work discussed critical differences in planning, developing hardware for and executing a high altitude balloon (HAB) mission. One area where this difference is less pronounced is in software development, allowing HABs to be utilized as a ‘software testbed’ for many orbital missions. This paper provides an overview of the software development process for both orbital and HAB craft, highlighting differences between the two processes and the numerous similarities. It concludes by presenting a framework for analyzing the suitability of HAB testing for small satellite software.

Modeled Impacts Of Cover Crops And Vegetative Barriers On Corn Stover Availability And Soil Quality, Ian J. Bonner, David J. Muth Jr., Joshua B. Koch, Douglas L. Karlen

David J. Muth

Environmentally benign, economically viable, and socially acceptable agronomic strategies are needed to launch a sustainable lignocellulosic biofuel industry. Our objective was to demonstrate a landscape planning process that can ensure adequate supplies of corn (Zea mays L.) stover feedstock while protecting and improving soil quality. The Landscape Environmental Assessment Framework (LEAF) was used to develop land use strategies that were then scaled up for five U.S. Corn Belt states (Nebraska, Iowa, Illinois, Indiana, and Minnesota) to illustrate the impact that could be achieved. Our results show an annual sustainable stover supply of 194 million Mg without exceeding soil erosion T …

Influence Of Environment On The Measurement Of Rates Of Charge Transport Across Agts/Sam//Ga2o3/Egain Junctions, Jabulani R. Barber, Hyo Jae Yoon, Carleen M. Bowers, Martin M. Thuo, Benjamin Breiten, Diana M. Gooding, George M. Whitesides

Martin M. Thuo

This paper investigates the influence of the atmosphere used in the fabrication of top electrodes from the liquid eutectic of gallium and indium (EGaIn) (the so-called “EGaIn” electrodes), and in measurements of current density, J(V) (A/cm2), across self-assembled monolayers (SAMs) incorporated into Ag/SR//Ga2O3/EGaIn junctions, on values of J(V) obtained using these electrodes. A gas-tight measurement chamber was used to control the atmosphere in which the electrodes were formed, and also to control the environment in which the electrodes were used to measure current densities across SAM-based junctions. Seven different atmospheres—air, oxygen, nitrogen, argon, and ammonia, as well as air containing …

Fabrication Of Low-Cost Paper-Based Microfluidic Devices By Embossing Or Cut-And-Stack Methods, Martin M. Thuo, Ramses V. Martinez, Wen-Jie Lan, Xinyu Liu, Jabulani Barber, Manza B. Atkinson, Dineth Bandarage, Jean-Francis Bloch, George M. Whitesides

Martin M. Thuo

This article describes the use of embossing and “cut-and-stack” methods of assembly, to generate microfluidic devices from omniphobic paper and demonstrates that fluid flowing through these devices behaves similarly to fluid in an open-channel microfluidic device. The porosity of the paper to gases allows processes not possible in devices made using PDMS or other nonporous materials. Droplet generators and phase separators, for example, could be made by embossing “T”-shaped channels on paper. Vertical stacking of embossed or cut layers of omniphobic paper generated three-dimensional systems of microchannels. The gas permeability of the paper allowed fluid in the microchannel to contact …

Observable Causality Implies Lorentz Group: Alexandrov-Zeeman-Type Theorem For Space-Time Regions, Olga Kosheleva, Vladik Kreinovich

Departmental Technical Reports (CS)

The famous Alexandrov-Zeeman theorem proves that causality implies Lorentz group. The physical meaning of this result is that once we observe which event can causally affect which other events, then, using only this information, we can reconstruct the linear structure of the Minkowski space-time. The original Alexandrov-Zeeman theorem is based on the causality relation between events represented by points in space-time. Knowing such a point means that we know the exact moment of time and the exact location of the corresponding event - and that this event actually occurred at a single moment of time and at a single spatial …

Self-Organizing Neural Networks Integrating Domain Knowledge And Reinforcement Learning, Teck-Hou Teng, Ah-Hwee Tan, Jacek M. Zurada

Research Collection School Of Computing and Information Systems

The use of domain knowledge in learning systems is expected to improve learning efficiency and reduce model complexity. However, due to the incompatibility with knowledge structure of the learning systems and real-time exploratory nature of reinforcement learning (RL), domain knowledge cannot be inserted directly. In this paper, we show how self-organizing neural networks designed for online and incremental adaptation can integrate domain knowledge and RL. Specifically, symbol-based domain knowledge is translated into numeric patterns before inserting into the self-organizing neural networks. To ensure effective use of domain knowledge, we present an analysis of how the inserted knowledge is used by …

Toward Automating Web Protocol Configuration For A Programmable Logic Controller Emulator, Deanna R. Fink

Theses and Dissertations

Industrial Control Systems (ICS) remain vulnerable through attack vectors that exist within programmable logic controllers (PLC). PLC emulators used as honeypots can provide insight into these vulnerabilities. Honeypots can sometimes deter attackers from real devices and log activity. A variety of PLC emulators exist, but require manual figuration to change their PLC pro le. This limits their flexibility for deployment. An automated process for configuring PLC emulators can open the door for emulation of many types of PLCs. This study investigates the feasibility of creating such a process. The research creates an automated process for figuring the web protocols of …

Copper Doping Of Zno Crystals By Transmutation Of 64Zn To 65Cu: An Electron Paramagnetic Resonance And Gamma Spectroscopy Study, Matthew C. Recker, John W. Mcclory, Maurio S. Holston, Eric M. Golden, Nancy C. Giles, Larry E. Halliburton

Faculty Publications

Transmutation of ⁶⁴Zn to ⁶⁵Cu has been observed in a ZnO crystal irradiated with neutrons. The crystal was characterized with electron paramagnetic resonance (EPR) before and after the irradiation and with gamma spectroscopy after the irradiation. Major features in the gamma spectrum of the neutron-irradiated crystal included the primary 1115.5 keV gamma ray from the ⁶⁵Zn decay and the positron annihilation peak at 511 keV. Their presence confirmed the successful transmutation of ⁶⁴Zn nuclei to ⁶⁵Cu. Additional direct evidence for transmutation was obtained from the EPR of Cu²⁺ ions (where ⁶³Cu and ^{65 …}

Regen: Optimizing Genetic Selection Algorithms For Heterogeneous Computing, Scott Kenneth Swinkleb Winkleblack

Master's Theses

GenSel is a genetic selection analysis tool used to determine which genetic markers are informational for a given trait. Performing genetic selection related analyses is a time consuming and computationally expensive task. Due to an expected increase in the number of genotyped individuals, analysis times will increase dramatically. Therefore, optimization efforts must be made to keep analysis times reasonable.

This thesis focuses on optimizing one of GenSel’s underlying algorithms for heterogeneous computing. The resulting algorithm exposes task-level parallelism and data-level parallelism present but inaccessible in the original algorithm. The heterogeneous computing solution, ReGen, outperforms the optimized CPU implementation achieving a …

Migrating To Ipv6 - The Role Of Basic Coordination, Mehdi Nikkhah, Roch Guerin

All Computer Science and Engineering Research

The need for a larger Internet address space was acknowledged early on, and a solution (IPv6) standardized years ago. Its adoption has, however, been anything but easy and still faces significant challenges. The situation begs the questions of "why has it been so difficult?" and "what could have been (or still be) done to facilitate this migration?" There has been significant recent interest in those questions, and the paper builds on a line of work based on technology adoption models to explore them. The results confirm the impact of several known factors, but also provide new insight. In particular, they …

Application Of A High-Performance Optically Enhanced Solar Thermal Collector System, Timothy H. Cameron

Honors Theses

In an effort to make Union College a more environmentally friendly campus, this research project focuses on the application of Union’s liquid-based solar thermal collector system. The motivation for this research project is due to the increasing demand for renewable energy sources in order to decrease our society’s dependence on fossil fuels. The system features nine, 16-tube, evacuated tube solar modules which absorb radiant solar energy from the sun. Through a two loop system, thermal energy is stored in water within two-80 gallon storage tanks. This research project involves the design, construction, and analysis of two applications in order to …

Evolving Soft Robots With Vibration Based Movement, Andrew Danise

Honors Theses

Creating effective designs for soft robots is extremely difficult due to the large number of different possibilities for shape, material properties, and movement mechanisms. Due to the lack of methods to design soft robots, previous research has used evolutionary algorithms to tackle this problem of overwhelming options. A popular technique is to use generative encodings to create designs using evolutionary algorithms because of their modularity and ability to induce large scale coordinated change. The main drawback of generative encodings is that it is difficult to know where along the ontogenic trajectory resides the phenotype with the highest fitness. The two …

Looking For Small Changes In Heat Capacity Using A Differential Scanning Calorimeter, Will Linthicum

Honors Theses

One of the major difficulties in development of renewable energy is the lack of an adequate and economical means of energy storage. In the case of concentrated solar power a large mass of thermal fluid is required to store a reasonable amount of energy. This is primarily because the fluids tend to have a low specific heat capacity. Formulating composites of these fluids can enhance their specific heat capacity and avails opportunities to make concentrated solar power more attractive. In most cases, the specific heat capacity of composite materials is a weighted average of the individual component heat capacities. This, …

An Eigenvector-Based Test For Local Stationarity Applied To Array Processing, Jorge Quijano, Lisa M. Zurk

Electrical and Computer Engineering Faculty Publications and Presentations

In sonar array processing, a challenging problem is the estimation of the data covariance matrix in the presence of moving targets in the water column, since the time interval of data local stationarity is limited. This work describes an eigenvector-based method for proper data segmentation into intervals that exhibit local stationarity, providing data-driven higher bounds for the number of snapshots available for computation of time-varying sample covariance matrices. Application of the test is illustrated with simulated data in a horizontal array for the detection of a quiet source in the presence of a loud interferer.

Placing Videos On A Semantic Hierarchy For Search Result Navigation, Song Tan, Yu-Gang Jiang, Chong-Wah Ngo

Research Collection School Of Computing and Information Systems

Organizing video search results in a list view is widely adopted by current commercial search engines, which cannot support efficient browsing for complex search topics that have multiple semantic facets. In this article, we propose to organize video search results in a highly structured way. Specifically, videos are placed on a semantic hierarchy that accurately organizes various facets of a given search topic. To pick the most suitable videos for each node of the hierarchy, we define and utilize three important criteria: relevance, uniqueness, and diversity. Extensive evaluations on a large YouTube video dataset demonstrate the effectiveness of our approach.

Coffee: Context Observer For Fast Enthralling Entertainment, Anthony M. Lenz

Master's Theses

Desktops, laptops, smartphones, tablets, and the Kinect, oh my! With so many devices available to the average consumer, the limitations and pitfalls of each interface are becoming more apparent. Swimming in devices, users often have to stop and think about how to interact with each device to accomplish the current tasks at hand. The goal of this thesis is to minimize user cognitive effort in handling multiple devices by creating a context aware hybrid interface. The context aware system will be explored through the hybridization of gesture and touch interfaces using a multi-touch coffee table and the next-generation Microsoft Kinect. …

Virtual Reality Engine Development, Varun Varahamurthy

Master's Theses

With the advent of modern graphics and computing hardware and cheaper sensor and display technologies, virtual reality is becoming increasingly popular in the fields of gaming, therapy, training and visualization. Earlier attempts at popularizing VR technology were plagued by issues of cost, portability and marketability to the general public. Modern screen technologies make it possible to produce cheap, light head-mounted displays (HMDs) like the Oculus Rift, and modern GPUs make it possible to create and deliver a seamless real-time 3D experience to the user. 3D sensing has found an application in virtual and augmented reality as well, allowing for a …

A Comparison Of Image Processing Techniques For Bird Detection, Elsa Reyes

Master's Theses

Orchard fruits and vegetable crops are vulnerable to wild birds and animals. These wild birds and animals can cause critical damage to the produce. Traditional methods of scaring away birds such as scarecrows are not long-term solutions but short-term solutions. This is a huge problem especially near areas like San Luis Obispo where there are vineyards. Bird damage can be as high as 50% for grapes being grown in vineyards. The total estimated revenue lost annually in the 10 counties in California due to bird and rodent damage to 22 selected crops ranged from $168 million to $504 million (in …

Revisiting Risk-Sensitive Mdps: New Algorithms And Results, Ping Hou, William Yeoh, Pradeep Reddy Varakantham

Research Collection School Of Computing and Information Systems

While Markov Decision Processes (MDPs) have been shown to be effective models for planning under uncertainty, theobjective to minimize the expected cumulative cost is inappropriate for high-stake planning problems. As such, Yu, Lin, and Yan (1998) introduced the Risk-Sensitive MDP (RSMDP) model, where the objective is to find a policy that maximizes the probability that the cumulative cost is within some user-defined cost threshold. In this paper, we revisit this problem and introduce new algorithms that are based on classical techniques, such as depth-first search and dynamic programming, and a recently introduced technique called Topological Value Iteration (TVI). We demonstrate …

An Integral Framework For Sustainable Building Design, Bushra Asfari

Masters Theses

Selection of materials for building design is a delicate process hinged of a number of factors which can be cost or environmental related, depending on the objectives of the design. This process becomes more difficult when designers are faced with several material options for each building component. This thesis presents the design and development of a framework that enables designers understand the trade-off between cost and environmental related factors when selecting materials for building design. The framework is based on the integration of Autodesk Revit, Microsoft access, and modeling modified Harmony search multi-objective optimization tool adapted to account for material …

Opportunistic Service Differentiation And Cloud Resource Management In Support Of Enhanced Vehicular Applications, Mohammad Ali Salahuddin

Dissertations

An integral part of Intelligent Transportation Systems (ITS) are Vehicular Ad hoc Networks (VANETs), which consist of vehicles with on-board units (OBUs) and fixed road-side units (RSUs). Wireless Access in Vehicular Environment (WAVE) offers QoS via service differentiation by using application defined priorities. However, WAVE has unbounded delay and is oblivious to network load and severity of vehicles with respect to their environment. Our context severity metric innovatively enhances WAVE to be sensitive to vehicle and environment interactions. Our novel Opportunistic Service Differentiation (OSD) technique, dynamically readjusts the WAVE packet priorities to improve utilization of lower latency queues, prioritizing packets …