Dental Materials Commons^™

Mathematical Modeling For Dental Decay Prevention In Children And Adolescents, Mahdiyeh Soltaninejad

Dissertations

The high prevalence of dental caries among children and adolescents, especially those from lower socio-economic backgrounds, is a significant nationwide health concern. Early prevention, such as dental sealants and fluoride varnish (FV), is essential, but access to this care remains limited and disparate. In this research, a national dataset is utilized to assess sealants' reach and effectiveness in preventing tooth decay, particularly focusing on 2nd molars that emerge during early adolescence, a current gap in the knowledge base. FV is recommended to be delivered during medical well-child visits to children who are not seeing a dentist. Challenges and facilitators in …

Clinical, Radiographic And Biochemical Evaluation Of One-Piece Vs Two-Piece Single Implants After 5 Years Of Functional Loading, Ippolito Caputo

Annual Research Symposium

The aim of this study was to compare the clinical and radiographic conditions and the expression of proinflammatory cytokines in peri-implant crevicular fluid (PICF) of two-piece/bone level (TP/BL) versus one-piece/tissue level (OP/TL) single implants with a laser-microgrooved collar after at least 5 years of functional loading.

Anti-Erosion Potential Of Fluoride Solutions Associated With Aminomethacrylate Copolymer: In Situ Randomized Crossover Study, Taiana Paola Prado, Karine Carvalho Dos Santos, Carlos Rocha Gomes Torres, Tais Scaramucci, Idalina Vieira Aoki, Alessandra Buhler Borges

Annual Research Symposium

The anti-erosion potential of fluoride solutions associated with aminomethacrylate (AMC) was evaluated in the presence of acquired pellicle on enamel and dentin. It is concluded that AMC was able to increase the anti-erosion potential of fluoride solutions in the presence of acquired pellicle.

Clinical Success Of Restorations With Bioactive And Non-Bioactive Materials: Systematic Review And Network Meta-Analysis, Juliana Benace Fernandes, Sheila Mondragón Contreras, Eduardo Bresciani, Taciana Marco Ferraz Caneppele

Annual Research Symposium

The oral cavity is a complex and dynamic environment with frequent pH and temperature changes that can affect the longevity of dental restorations. Consequently, bioactive restorative materials, capable of advantageous interactions with the oral environment and dental tissues, are promising alternatives. However, there is limited scientific evidence of their clinical performance. Therefore, we conducted this systematic review and network meta-analysis of clinical studies to address the research question: Does the clinical evaluation of restorations on permanent teeth with bioactive materials show greater success rates than those with non-bioactive materials?

An Emg Study To Evaluate Chewing Efficiency And Maximum Voluntary Clenching (Mvc) For Different Malocclusion Groups Before And During Orthodontic Treatment, Vivek Reddy

Annual Research Symposium

The purpose of this study was to investigate the efficacy of chewing and maximum voluntary clenching (MVC) of patients with different malocclusion types by measuring the EMG activity in the masseter and temporalis muscles before and during orthodontic treatment.

Corrosion Of Implant Materials In The Human Body, Maedeh Barzmehri

Corrosion Research

This paper extensively examines the complex problem of implant corrosion occurring within the human body. The corrosion of implants gives rise to substantial challenges, encompassing compromised implant durability, patient safety concerns, and potential adverse impacts on the long-term functionality of the medical device. The study's primary objectives include offering a concise overview of the various corrosion mechanisms that impact a range of implant materials and outlining health complications linked to the byproducts of implant corrosion. Furthermore, it delves into a cost analysis specific to hip or knee revision arthroplasty, which has become a prevalent scenario in implant failure cases on …

Emergence Of Dental Nanomaterials: “Their Role In Performing Endodontic Therapy”, Chandrika Nama, John Wisniewski Dr.

Annual Research Symposium

No abstract provided.

Comparing The Efficacy Of Sodium Fluoride And Silver Diamine Fluoride In Arresting Caries Through Statistical Analysis, Elana Ferris

Annual Research Symposium

No abstract provided.

An Investigation Into The History, Science, And Future Of Dental Filling Materials, Natalia Kaczor

Honors Theses

No abstract provided.

Evaluation Of The Biocompatibility And Micromechanical Properties Of Experimental Dental Adhesives, Hoda Moussa

Forensic Science Theses

The purpose of this study was to investigate the biocompatibility and micromechanical properties of newly synthesized antibacterial monomer and cross-linker functional surfactants into a commercially available dental adhesive (Single Bond, 3M ESPE, Saint Paul, MN, USA) at three concentrations (0.05, 0.1, 0.25 mg/mg). All groups were analyzed by evaluation of micro-tensile bond strength, ultimate tensile strength, cell viability, antibacterial properties, and surface micro-hardness. Scanning electron microscopy (SEM) was used for interfacial characterization.

Human extracted molars were used as a substrate for bonding adhesives for the micro-tensile bond strength (MTBS) and scanning electron microscopy (SEM) studies. Twenty resin-dentin beams (0.9 ± …

Biodegradable Nano-Hybrid Polymer Composite Networks For Regulating Cellular Behavior, Charles Henley Sprague

Masters Theses

Photo-crosslinkable polymeric biomaterials have emerged in the field of biomedical research to promote tissue regeneration. For example, scaffolds that can be crosslinked and hardened in situ have been known to make suitable implant alternatives. Since injectable and photo-crosslinkable biomaterials offer the advantage of being minimally invasive, they have emerged to compete with autografts, a current highly invasive method to repair diseased tissue. A series of novel photo-crosslinkable, injectable, and biodegradable nano-hybrid polymers consisting of poly(ε-caprolactone fumarate) (PCLF) and polyhedral oligomeric silsesquioxane (POSS) has been synthesized in our laboratory via polycondensation. To engineer the material properties of the nano-hybrid networks, varied …

Exploration Of Materials Used In 3-Dimensional Printing For The Dental Industry, Holly Chang Hayden

Scripps Senior Theses

A limiting factor in the digitization of dental devices is the availability of materials suitable for use in both dentistry and the new digital technologies. As a rapidly growing industry, three-dimensional printing (3DP) has the potential to disrupt traditional manufacturing and prototyping methods. A review of both restorative materials and the current 3DP materials has lead to a focus on fiber- reinforced composites in the exploration for a new 3DP material. In addition, another area worth exploring and investing in would be 3D bioprinting as it opens up the possibility of regenerative dentistry.

Immediate Loading Of Unsplinted Implants In The Anterior Mandible For Overdentures, Phillip Roe

Loma Linda University Electronic Theses, Dissertations & Projects

In this one-year prospective study, eight completely edentulous patients were selected from the Loma Linda University School of Dentistry (LLUSD) patient population to participate. There were five male and three female patients, between the ages of 58 and 82 (mean age of 69.1 years). All participants received new maxillary and mandibular complete dentures prior to implant placement. Two 4.0 mm x 13 mm threaded implants with a fluoride-modified, micro-roughened, titanium surface were placed mesial to each mandibular canine position. Locator abutments were connected and torqued to 25 Ncm and primary closure was achieved with a nonresorbable suture material. The Locator …

Comparison Of Microleakage In Three Sealant Placement Protocols Vs. The Enamel Loc System, Audrey T. Sheu

Loma Linda University Electronic Theses, Dissertations & Projects

PURPOSE: To evaluate sealant microleakage using four different application techniques.

METHODS: The four application techniques evaluated were acid etch only, Adper L-Pop bonding, Optibond bonding, and Enamel Loc One-Step Sealant. Sixty-four extracted third molar teeth were assigned on one of four application techniques (n=16) and Clinpro sealants applied according to the manufacturer's instructions. The teeth were thermocycled for 500 cycles, dyed, and embedded in resin. The samples were then sectioned and evaluated for microleakage on the buccal and lingual surfaces. Statistical methods employed to analyze the data were the Kruskal-Willis rank test and the Mann-Whitney U test.

RESULTS: No significant …

Effect Of Gutta Percha On The Retention Of A Post Using Different Cements, Saeda H. Basta

Loma Linda University Electronic Theses, Dissertations & Projects

This study evaluated the effect of residual gutta percha on the retention strength of prefabricated post cemented with four different cements. Forty intact mandibular single canal canines or premolars were selected for standardized size and quality, endodontically treated, and decoronated to the cementoenamel junction. A post space was prepared to accommodate Para post XP size 4 (Coltene, Whaledent Inc., Cuy Falls, Ohio) to a depth of 8 mm. The Obtura heated gutta percha system was used to inject a very thin line of gutta percha along one lateral wall to the depth of the future post. Forty obturated teeth were …

Comparison Of Laser And Phosphoric Acid Etching On Sealant Shear Bond Strength, Seth David Latimer

Loma Linda University Electronic Theses, Dissertations & Projects

PURPOSE: To compare the effect of traditional phosphoric acid etching with Er,Cr:YSGG laser enamel etching on the shear bond strength of sealant material.

METHODS: Extracted healthy third molars were mounted in acrylic exposing the flattest surface available. Three groups of twenty teeth were used to evaluate traditional acid etching with 37% phosphoric acid as a control group as well as two different laser settings. The sealant material was attached using specialized jigs and then subjected to shear bond strength testing utilizing the ultradent method (MTS machine). Statistical methods employed were the Kruskal-Wallis rank test and the Mann-Whitney U test.

RESULTS: …

The Effect Of Calcium Hydroxide Pastes On Root Dentin Fracture Resistance, Kurt W. Sturz

Loma Linda University Electronic Theses, Dissertations & Projects

Calcium hydroxide is a common intracanal medicament used in the treatment of immature teeth that have been subjected to trauma or decay prior to root canal therapy. The effect of calcium hydroxide on immature root dentin is important. One area of concern is the effect that calcium hydroxide has on the fracture resistance of an immature tooth. It is the aim of this study to compare the effect of four different commercially available calcium hydroxide pastes on the fracture resistance of bovine teeth. Seventy-five freshly extracted, intact bovine incisors were prepared according to a modified Haapasalo and Orstavik technique. Each …

The Outcome Of Mta As A Root End Filling Material: A Long Term Evaluation, Christopher M. Sechrist

Loma Linda University Electronic Theses, Dissertations & Projects

Periradicular surgery is a viable option to save natural teeth when non-surgical treatment fails or when endodontic retreatment is not feasible or contraindicated. Laboratory and animal studies have demonstrated that MTA is biocompatible, provides an excellent seal against penetrating bacteria, and promotes hard tissue healing. The purpose of this study was to provide long term (>3 years) clinical evidence for its use as a root-end filling material in endodontics. The clinical records of 294 patients who had MTA used during endodontic treatment from 1996 to 2001 were reviewed. From these, 75 patients whose root end cavities had been filled …

The Effect Of Naocl, Ca(Oh)2, Mta And Mtad On Root Dentin Fracture Resistance, Sunil Ilapogu

Loma Linda University Electronic Theses, Dissertations & Projects

Various materials are used for the treatment of immature teeth that have been subjected to trauma or decay. It is not well established what effect these materials may have on the immature root dentin. A concern would be the resistance to fracture of the remaining root dentin. The purpose of this study was to compare the resistance of fracture of bovine teeth treated with sodium hypochlorite, calcium hydroxide, gray MTA and gray MTA in conjunction with MTAD after certain periods of time. One hundred and ninety five freshly extracted, intact bovine incisors were prepared using a modified Haapasalo and Orstavik …

Comparison Of Bracket Bond Strength By Total, Self-Etch And Laser Treatment, Kyo Sung Shawn Kim

Loma Linda University Electronic Theses, Dissertations & Projects

Laser etching of enamel surfaces alters the physical and chemical characteristics of the enamel. These changes in characteristics enhance the bonding to enamel. The purpose of this study was to compare the shear and tensile bond strength of Er,Cr:YSGG hydrokinetic laser system (Biolase) with 37% phosphoric acid and self etching primer 30 minutes and 72 hours after bonding. Four different laser power output setting was observed: 1.5W, 2.0W, 2.5W, and 3.0W. Two hundred forty bovine teeth free of defect, caries, and dentin exposure were mounted in acrylic resin and divided into 24 groups of 10 teeth. Sixteen groups of 10 …

A Bond Strength Comparison Of Led And Halogen Light Curing Units, John Richard Kavanagh

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this research was to compare the tensile bond strength of orthodontic flat based buttons bonded to bovine teeth with four commercial light-emitting diode (LED) curing lights and one conventional quartz tungsten halogen (QTH) curing light.

The dental market has recently been introduced to a number of commercially available light-emitting diode (LED) curing lights. Tensile bond strength was evaluated for LED curing lights (Rembrandt® Allegro^TM, Den-Mat Corp, Santa Maria, CA), (LEDemetron, Kerr/Demetron Corp, Danbury, Conn), (Ortholux LED, 3M^TMESPE^TM, St. Paul, MN),and (FLASH-lite 1001, Discus Dental, Culver City, CA) are compared with one …

The Radiopacity Of 29 Resin Restorative Materials Compared To Enamel, Peter Lubisich Iv

Loma Linda University Electronic Theses, Dissertations & Projects

The radiodensity of a composite resin can greatly influence a clinician's ability to analyze a restoration for failure. The purpose of this study was to determine the relative radiopacities of 29 resin restorative materials compared to enamel, and to verify the comparable radiopacity between shades of 23 of the restorative composite resin materials. Composite resin discs measuring >5mm in diameter and 2 mm in thickness were made and polymerized. Radiographs were taken of the composite resin discs, which included an aluminum step wedge for calibration and a densitometer was used to measure the radiodensity of the composite resin samples. The …

A Pilot Study Testing A Proprietary Sealant For Plaque Reduction, Jennifer Rowland

Loma Linda University Electronic Theses, Dissertations & Projects

Enamel demineralization due to increased plaque accumulation is a well-recognized problem associated with fixed orthodontic appliances. The purpose of this study was to evaluate the efficacy of a proprietary product to be marketed by 3M Unitek for the reduction of plaque accumulation and thereby reduce enamel demineralization.

Sixty four bovine teeth were divided equally into an untreated control group and a group treated with the proprietary sealant product. Both groups were subsequently immersed in a Streptococcus mutans culture. Plaque deposits from each group were removed, suspended in trypticase soy broth, serially diluted, and plated on trypticase soy agar at 1, …

The Fracture Strength Of Ceramic Brackets : An Update And Comparison, Christian P. Manley

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this study was to compare the fracture strength of ceramic brackets which are currently on the market with ceramic brackets tested in a previous study at Loma Linda. Fracture strengths of standard edgewise ceramic brackets vs. pre-torqued ceramic brackets and bicuspid ceramic brackets vs. central incisor ceramic brackets were also compared.

A total of 160 Polycrystalline brackets, 8 categories in groups if 20, were tested for fracture strength. Each bracket was tested using the same testing model that was used in the previous study at Loma Linda. The brackets were tested by torquing a wire within the …

Methodology In Measurement Of Load Loss Or Gain In Orthodontic Wires : A Pilot Study, Merton S. Lacy

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this investigation was to develop methods and equipment to measure and record over any desired length of time the loss or gain in force of any material used in orthodontics that can produce a force upon an object. The material and the object being acted upon should not be disturbed while measuring that force.

Holding devices were designed and constructed in two basic forms. For intrusive and extrusive type forces, a load cell was fixed horizontally in such a position that an adjustable tube with a set screw to hold the wire could be rotated to cause …

Fatigue Properties Of Orthodontic Wire, Kirkland B. Reuer

Loma Linda University Electronic Theses, Dissertations & Projects

Fracture of orthodontic appliances can be a problem because of the time involved to replace and repair them. It has been shown that most failures have been a result of fatigue fracture, i.e., failure resulting from cyclic loading.

The purpose of this study was to determine what effect variation of the type of orthodontic wire and heat treatment had on fatigue resistance. A device was constructed to put a cyclic load on a piece of wire until fracture. Two types of cobalt-chromium alloy wire (Blue and Green Elgiloy from Rocky Mountain Orthodontics) and three types of stain less steel wire …

The Theoretical Distribution Of Forces In The Rigid Component Of The Buccal Arch Positioner, Dennis H. Teruya

Loma Linda University Electronic Theses, Dissertations & Projects

The distribution of an applied force to the rigid component of the Buccal Arch Positioner was determined with a theoretically formulated model. The rigid component was assumed to be a free body without the semi-rigid attachments and was evaluated at four points for the force distribution. The summation of the forces and the moments were equated to zero and were utilized to derive equations to solve for the unknown forces. The unknown forces at each point of the rigid component were solved for in terms of the given force applications.

A laterally directed force application at one of the posterior …