Medicine and Health Sciences Commons^™

Analyzing The Influence Of Design And Operating Conditions On Combustion And Emissions In Premixed Turbulent Flames: A Comprehensive Review, Medhat Elkelawy Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Hagar Alm-Eldin Bastawissi, Ibrahim Ali Mousa Eng., Mohamed M. Abdel-Raouf Ibrahim Dr. Eng.

Journal of Engineering Research

Recently, premixed combustion has dominated the field of combustion research worldwide. The current work is a review that addresses the effects of design and operating regimes on the combustion and emission characteristics of premixed turbulent flames. The study accounts for recent developments aimed at overcoming combustor operability issues that influence emissions and flame stability. Various experimental setups have been utilized in investigations, with results pertaining to performance and emissions concerning premixed turbulent flames. Thus, the objective of this paper is to provide a comprehensive review of the effects of swirl vane angles and equivalence fuel-air ratios for tests conducted both …

Building For Safety: Design Considerations For Refuge Areas In Tall Buildings From Quality Management Perspective, Enass. A. Salama, Heba. M. Gaber, Ahmed. M. Selim

Journal of Engineering Research

New El Alamein City is one of the largest urban projects in Egypt, and the largest project on the north coast. Tall buildings (super high-rise buildings) are considered the prevailing trend by architectural designers to obtain the maximum view of the Mediterranean Sea. The provision of safety evacuation in emergencies for these buildings’ occupants is a crucial challenge from the Quality management point of view. In contrast, there are no sufficient architectural design guidelines for the tall buildings provided by the Egyptian code for protecting buildings from fire, especially the design of the refuge areas. This study aims to investigate …

Effect Of Organic Compounds Additives For Biodiesel Fuel Blends On Diesel Engine Vibrations And Noise Characteristics, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Mahmoud Soliman Eng.

Journal of Engineering Research

The extensive consumption of petroleum fuel directly correlates with both hazardous exhaust emissions affecting human health and contributing to global warming. Initially, biodiesel fuels were proposed as a viable alternative to address these issues. This perspective finds support in numerous published studies that highlight how the significant catalytic effect of nanoparticles allows for their integration into biodiesel blends, resulting in improved combustion characteristics, reduced exhaust emissions, and enhanced performance. This study investigates the impact of additives on biodiesel fuel properties and its effects on engine performance metrics such as brake power, brake thermal efficiency, exhaust gas concentration, engine vibration, and …

Investigation Into The Impact Of Ammonia Hydroxide On Performance And Emissions In Compression Ignition Engines Utilizing Diesel/Biodiesel Blends, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Mohammed Osama Elsamadony Dr. Eng., Abdallah Salem Abdalhadi

Journal of Engineering Research

In recent times, there has been a surge in scientific endeavors aimed at combating global warming. Various methods have been employed to address this issue, including the substitution of fossil fuels with more environmentally sustainable alternatives and the combination of different fuel types. This can be achieved through the integration of innovative injection systems and the simultaneous combustion of alternative fuels alongside fossil fuels, or by modifying fuel injection systems such as in the PCCI, RCCI, or HCCI systems. In a particular research investigation, a blend of ammonia hydroxide and diesel, with volume percentages of 7.5% and 92.5% respectively, was …

Enhancing Diesel Engine Performance By Directly Injecting Blends Of Ammonium Hydroxide And Including Liquid Petroleum Gas As A Partially Premixed Charge, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Mohammed Osama Elsamadony Dr. Eng., Abdallah Salem Abdalhadi

Journal of Engineering Research

Recently, scientists have made significant strides in addressing or mitigating environmental issues. Researchers have adopted various approaches to tackle these issues, such as replacing fossil fuels with more environmentally friendly alternatives or blending multiple fuel types. This can be achieved by either integrating these two trends through the use of new injection systems and simultaneous combustion of alternative fuels with fossil fuels or by modifying fuel injection systems, exemplified by the PCCI, RCCI, or HCCI systems. Consequently, these methods have proven effective in reducing environmental pollutants, enhancing thermal efficiency, and decreasing specific fuel consumption. In this study, ammonia hydroxide and …

Experimental Investigation On Combustion And Emission Characteristics Of Co-Combustion Of Pulverized Biomass With Diesel Fuel In An Industrial Burner, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Ahmed Abou El-Yazied Prof. Dr., Saad El-Malla Dr. Eng.

Journal of Engineering Research

This study presents the combustion and emission results obtained from a laboratory furnace equipped with a 35 kW industrial burner that utilizes co-combustion of pulverized biomass and diesel fuel. The experiment compared the co-combustion of pulverized biomass and diesel fuel with diesel fuel alone. Three different loading ratios of pulverized biomass from residual beet samples were used. Temperatures were measured at various positions inside the furnace to analyze combustion performance. It was observed that increasing the biomass loading ratios led to higher flame temperatures and improved combustion compared to diesel fuel alone. The concentrations of pollutants such as Co, HC, …

Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr

Journal of Engineering Research

Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …

تقنيات الاضاءة الصناعية وتأثيرها فى الفراغ السكنى على السلوك الانسانى, Samah Kamal Elfeky, Walaa Ahmad Nour, Lobna Abdelfatah Agha

Journal of Engineering Research

* Lighting is considered of main items in daily life begining from natural Lighting to industrial lighting. with all of it's different shapes . it is considerdone of the most important data that point Blank spaces and works to show architectural spaces, aesthetic values through being sharp and weak, ensure borders show texture or hide Features, suggest wideness, narrowness of space as the most beautiful design don't see beautiful without good lighting which designed carefully.Due to diversity of human activities, architictums spaces and it is wideness. Increased dependence on industrial Lighting to strengthen Job of performance, beauty of internal, external …

How Can Generative Ai (Genai) Enhance Or Hinder Qualitative Studies? A Critical Appraisal From South Asia, Nepal, Niroj Dahal

The Qualitative Report

Qualitative researchers can benefit from using generative artificial intelligence (GenAI), such as different versions of ChatGPT—GPT-3.5 or GPT-4, Google Bard—now renamed as a Gemini, and Bing Chat—now renamed as a Copilot, in their studies. The scientific community has used artificial intelligence (AI) tools in various ways. However, using GenAI has generated concerns regarding potential research unreliability, bias, and unethical outcomes in GenAI-generated research results. Considering these concerns, the purpose of this commentary is to review the current use of GenAI in qualitative research, including its strengths, limitations, and ethical dilemmas from the perspective of critical appraisal from South Asia, Nepal. …

History Of Clover Leaf Syndrome, Isabella Perez

Mako: NSU Undergraduate Student Journal

The purpose of this paper is to summarize the history of clover leaf syndrome and describe the newest advancements made to treat it. Clover leaf syndrome is more formally referred to as Kleeblattschadel syndrome. Information was gathered from several scholarly, peer-reviewed articles, and was condensed down into the key takeaways. This syndrome impacts the formation of the skull due to premature fusion of its sutures, creating a tri-lobar skull that resembles a clover leaf. This premature fusion is referred to as a type of craniosynostosis and has been linked to causing several other health complications ranging in severity. This is …

Love Machina, John C. Lyden

Journal of Religion & Film

This is a film review of Love Machina (2024), directed by Peter Sillen.

The Influence Of Green Building Design On Tourists' Intention To Stay In Eco-Friendly Hotels: A Study On Perceptions And Preferences, Enas Al Sayed Salama Dr., Gehad Nasr Abdelsalam Dr.

Journal of Engineering Research

Green building design involves integrating sustainable and environmentally friendly practices into the construction and operation of buildings, including hotels, with the goal of minimizing the adverse impact on the environment. This paper delves into the pivotal role of green building design and eco-service provision within the context of green hotels. The aim is to investigate the interconnections among tourists' environmental concerns, their perceived significance of green building design, and their intention to choose green hotels.

To enhance the understanding of tourist behavior and its implications for tourism in Egypt, a questionnaire was administered in Sharm El Sheikh, a prominent Egyptian …

Experimental Study Of Bent Glass Curtain Walls., Sarah Said Abd El Kariem, Moustafa El Shami, Mahmoud El Nagar

Journal of Engineering Research

A Bent Laminated Glass is commonly used in the residential and commercial structures, its methodology is not present in the curves and tables at the ASTM E1300. Therefore, it has become a need for architects to use basis for this type of glass. To the best of authors ‘knowledge, no one study the bent laminated glass in details. A variety of safety glass that has lately gained popularity in the construction sector is modern laminated glass. Given that it offers a safe failover capability, it is perfect for the automotive industry. Double-lite glass is produced using two or more …

Market Analysis And Bidding Strategy Of Hybrid Renewable Energy Systems Considering Emissions, Fatma Elzahraa, Mohamed Elnemr, Samir Dawoud

Journal of Engineering Research

The competition in the electricity markets makes it difficult to choose a suitable strategy for maximizing profit while reducing harmful emissions. To have an adequate energy price for consumers while minimizing the harmful emissions to the atmosphere and maximizing profits of all participants in the electricity market needs an aggressive bidding strategy. Developing these bidding strategies with the integration of renewable energy (RE) in the electricity market became important. This research studies various bidding strategies for maximizing profits in the deregulated energy market since participants are keen on developing bidding strategies considering emissions. These bidding strategies will consider the integration …

Effects Of Fuel Equivalence Ratio And Swirl Vane Angles On Premixed Burner Turbulent Flame Combustion Characteristics, Medhat Elkelawy Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., Ibrahim Ali Mousa Eng., Mohamed M. Abdel-Raouf Ibrahim Dr. Eng.

Journal of Engineering Research

A turbulent flow field has a major effect on the premixed flame structure and temperature distribution that specifically determines the effectiveness of the burned fuel and the amounts of produced emissions. However, the premixed flame tangential and axial velocity distribution through the flame length help to predict the combustion and emissions attributes of the burned fuel. In this regard, an experimental and analytical investigation on premixed turbulent burners at different equivalence fuel-air ratios with different swirl vane angles has been achieved in the present work to assess the combustion performance and emissions characteristics. A theoretical methodology was carried out to …

Enhancing The Performance Of Conventional Solar Still Using The Nano-Doped Paint (Ndp) Coating, Hagar Alm-Eldin Bastawissi Prof.Dr, Nermin Elgendy Engineer, Ayman R. El-Tohamy

Journal of Engineering Research

Nations are throughout the entire globe continuously confronting the problem of potable water shortage. Recently, it has been thought that using solar energy to desalinate brackish water offers a practical answer to the world's water crises. The output of these stills, is meager, and academics haven't done much to boost it in any way. Solar distillers have been proposed as an efficient method to produce potable water. In recent years, saltwater has produced drinking water by various ways. The efficiency of a solar distiller is significantly influenced by various factors, most important factor of them is the absorber surface. In …

Engine Performance And Emissions Improvement Study On Direct Injection Of Diesel/Ammonia Dual Fuel By Adding Cng As Partially Premixed Charge, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi Prof. Dr., Mohammed Osama Elsamadony Dr. Eng., Abdallah Salem Abdalhadi Eng.

Journal of Engineering Research

Researchers have recently moved on in their studies to find a solution to prevent or reduce this problem. There have been directions taken by researchers to solve the problem, including, replacing fossil fuels with environmentally friendly types or by combining two or more types of fuel. This is by modifying fuel injection systems as appears in the PCCI, RCCI, or HCCI systems, or working to integrate the two trends by using new injection systems and burning alternative fuels with fossil fuels. Therefore, the trend has good results on the specific consumption of fuel, raising thermal efficiency, and working to reduce …

Experimental Study On The Impact Of Secondary Air Injection And Different Swirl Van Angles On Premixed Turbulent Flame Propagation And Emission Behaviors, Medhat Elkelawy Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., Ibrahim Ali Mousa Eng., Mohamed M. Abdel-Raouf Ibrahim Dr. Eng.

Journal of Engineering Research

The objective of the present paper is to investigate experimentally the flame characteristics utilizing different secondary air inlet direction for different primary air swirl numbers and equivalence fuel-air ratios. In this study, an experimental test rig was carried out to investigate the flame temperature and emission behavior with flame length at the equivalence fuel-air ratios taken0.96, 0.80, 0.70, and 0.60, and swirl vane angles were varied as 20, 30, 45, and 60° to generate different swirl numbers of 0.26, 0.416, 0.71 and 1.23, respectively. In addition to the introduction of secondary air in test combustor, whereas the primary air and …

The Effect Of An Existing Tunnel And A Newly Excavated Tunnel On Ground Loss Beneath Sand Slope-3d Numerical Study, Ashraf Nazir, Ahmed Nasr, Asmaa Saeed

Journal of Engineering Research

Abstract- Most researchers perform their numerical models for tunnels by modeling perfectly horizontal ground surfaces above the tunnels. The prediction of surface settlement of a sandy slope due to the interaction mechanism between the slope and the tunnels is one of the critical problems in urban areas. As a result, in this work, a numerical analysis using PLAXIS 3D TUNNEL has been performed to investigate the effect of tunnel excavation on the deformation of a shallow sandy slope, and empirically by the Herzog method. The study also assesses the influence of parameters on slope deformation that have not been …

A Case Study Assessing The Integration Of Nuclear Safety And Security In Facilities Using A Monte Carlo Simulation Aided Analytical Hierarchy Process, Theodore A. Thomas, Shraddha Rane, Jason Timothy Harris

International Journal of Nuclear Security

Nuclear safety and security are essential in all operations using nuclear and radioactive materials. Even though both elements are important, the evolution of these programs has not developed at the same rate. As such, their integration has been met with challenges. This study analyzed the potential for synergy across different criteria and settings when integrating nuclear safety and security. The criteria included eight points where overlap could be identified between nuclear safety and security. Three work settings—industrial, medical, and research—were evaluated. Responses were collected from nine individuals who worked with nuclear materials in various capacities and different nuclear work settings. …

A Pilot Sexual Device Adaptation Project For Occupational Therapy Students: A Skills-Based Approach To Teaching Sexual Activity As An Adl Through Assistive Technology, Benjamin E. Canter, Zoe M. Loitz, Victoria E. Richardson, Tatiana B. Pontes, Leanna Katz, Kevin Berner, Pedro Htq Almeida

Journal of Occupational Therapy Education

Despite being categorized as an activity of daily living since the first edition of the Occupational Therapy Practice Framework, no Accreditation Council for Occupational Therapy Education (ACOTE) standards exist to provide guidance on teaching occupational therapy students about sexual activity as an activity of daily living (ADL). When discussed, sexual activity is usually taught via didactic lecture, but is a subject that would benefit from a skills-based approach to teaching. This pilot pedagogical exercise in a two-credit assistive technology class taught occupational therapy students to address the ADL of sexual activity with clients by having students adapt a sexual toy …

Diagnostic Accuracy Of Cbct In The Differential Diagnosis Of Apical Cysts And Granulomas Using Histopathological Findings As A Reference Standard: A Systematic Revew, Fatima Zohra Rouggani, Chaimaa Kabil, Rachida Mayou, Sidi Mohamed . Bouzoubaa

Health Sciences

Introduction

The periapical lesions represent a complex group. Granulomas and cysts represent the two most frequent forms in routine clinical practice.

Aim: Highlight the diagnostic accuracy of CBCT imaging in the differential diagnosis between a cyst and a granuloma compared to histopathological examination as a reference technique.

Materials and Methods:

Our literature search involved articles published in the following databases: PubMed, Cochrane, science direct and Google scholar.

Our intention was to review recent articles from the last 5 years and to select studies conducted in significantly changed socio-medical contexts that could have a positive impact on the validity of our …

Inclusive Integration Of Refugees And Migrants In Djibouti's National Healthcare System: Current Situation And Prospects For Improvement, Farhan Houssein Ali, Njah Mansour, Kenza Hassouni

Health Sciences

Cet examen narratif vise à décrire et synthétiser les données actuelles sur la situation des migrants et des réfugiés à Djibouti, ainsi que les progrès de la stratégie d'intégration inclusive mise en œuvre par le gouvernement djiboutien. Il s'appuie sur diverses sources, notamment la littérature grise et les publications scientifiques. Les résultats indiquent que le nombre de migrants et de réfugiés est en augmentation constante depuis 2019, avec un état de santé vulnérable et des risques sanitaires alarmants. Il est urgent d'accélérer la mise en œuvre de la stratégie tout en l'adaptant aux données actuelles et d'établir un système fiable …

Satisfaction And Absenteeism To Lectures:Cross-Sectionnel Study Of Dental Students, Manal El Hijazi, Soundouss Soulami, Ihsane Benyahya

Health Sciences

Introduction: Lectures are still the main pedagogical tool in universities. The aim of this study was to evaluate student satisfaction with lectures and to analyze the factors behind student absenteeism.

Methods: A descriptive cross-sectional study was carried out among dental student by a voluntary, anonymous self-administered questionnaire with open and closed question. Statistical analysis was performed by SPSS version 25 and the Chi2 test was used to compare percentages, with a significance level of p

Volar V-Y Advancement Flaps In Reconstructing Fingertip Injuries, Sawsan Abiad

BAU Journal - Science and Technology

Fingertip injuries with exposed bones and joints require immediate or early closure for the preservation of function and avoidance of complications. The ideal procedure should maintain the length of the finger and cover the defect with non-tender, well-padded skin with normal sensation. The aim of this study was to evaluate the role of the different types of volar V-Y advancement flaps in reconstructing and resurfacing injuries of the fingertips at different levels and angles. Thirty patients (N=30) sustaining fingertip injuries of variable etiology and lost components, type III & IV according to Allen’s classification were divided into two groups (n=15) …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Foreword From Editor - 14th Edition, Yandi Andri Yatmo

ASEAN Journal of Community Engagement

This edition of AJCE brings together discussions on the various roles and effectiveness of research and community engagement programs in strengthening local identity, developing skills, and enhancing quality of life towards a resilient society. Expanding such roles, this issue consists of four research articles, one review article, and three case-based articles. The authors of this edition emerge from the background of language, engineering, economy, policy, education, and health, providing different outlooks and methods in overseeing the processes of community-related programs.

Combined Risk Based Inspection And Fault Tree Analysis For Repetitive 3-Phase Line Piping Leakage At West Java Offshore Topside Facility, Dona Yuliati, Akhmad Herman Yuwono, Datu Rizal Asral, Donanta Dhaneswara

Journal of Materials Exploration and Findings (JMEF)

Hydrocarbon releases might result in serious consequences in various aspects. In addition to the contribution to environmental pollution, repetitive leakages need high repair costs. This study aim is to minimize potential repetitive leakage for other typical 3-phase piping systems. We conducted the risk assessment by adopting Risk Based Inspection (RBI) API 581 to identify risk level, calculating piping lifetime, recommended inspection plan and mitigations. The most relevant root causes can be obtained through quantitative Fault Tree Analysis (FTA). Observation and investigation was taken from eight 3-phase piping systems that experienced repetitive leakages. It has been found that the risk level …

Nitrogen Gas Quenching Pressure Effect On Bs S155 Alloy Steel In Vacuum Furnace, Agus Mulyadi Hasanudin, Eddy Sumarno Siradj

Journal of Materials Exploration and Findings (JMEF)

The production of metal and alloy products requires the use of heat treatment, when during the heat treatment process, quenching is a crucial step. The quenching medium can be anything from water, a salt bath, oil, air and gas. In a vacuum furnace, pressurized gas, most frequently nitrogen (N₂) gas, serves as one of the quenching mediums. One of the drawbacks of the quenching process is the distortion and dimensional change of the parts. This paper aims to investigate the influence of nitrogen gas quenching pressure on the distortion and dimensional change of aerospace actuator gear planet parts …

Getting Off On The Right Foot: Addressing Severe Lymphedema Through A Novel Shoe Design, Carl R. Russell Iii, Anjollie M. Ramakrishna, Christopher H. Johns Iii, Alana V. Van Wijnen

Purdue Journal of Service-Learning and International Engagement

Engineering Projects in Community Service (EPICS) is a service-learning design program run by the College of Engineering at Purdue University. EPICS teaches students design skills by providing solutions for individuals, communities, and organizations in the surrounding area while mirroring engineering industry standards. Biomedical Engineering is a team within EPICS that strives to serve community partners through biomedical applications. HR is a patient who suffers from severe lymphedema. This condition results in her foot swelling three times its original size and requires her to utilize weekly leg compression therapy. Prescription shoes are slightly adequate. However, they lead to sores and pain …