Life Sciences Commons^™

Biomass Estimation Of Marine Biofilms On Plastic Surfaces, Kian Banihashemi, Fernando Javier Gil

Biological Sciences

Plastics have become a major source of marine pollution, which threatens food safety and quality, human health, and marine ecosystems. Due to the drastic negative effects of plastics in a marine environment, alternative biodegradable plastics are being generated that are more eco-friendly and have less environmental impact. Though some of these plastics are known to biodegrade, the process of degradation for bioplastics has not been heavily studied in a marine environment. This pilot project sought to both quantify the process of biodegradation and compare across different methods for effectiveness of biomass estimation, which serves as an indicator of biodegradation. Plastics …

Eelgrass (Zostera Marina) Population Decline In Morro Bay, Ca: A Meta-Analysis Of Herbicide Application In San Luis Obispo County And Morro Bay Watershed, Tyler King Sinnott

Master's Theses

The endemic eelgrass (Zostera marina) community of Morro Bay Estuary, located on the central coast of California, has experienced an estimated decline of 95% in occupied area (reduction of 344 acres to 20 acres) from 2008 to 2017 for reasons that are not yet definitively clear. One possible driver of degradation that has yet to be investigated is the role of herbicides from agricultural fields in the watershed that feeds into the estuary. Thus, the primary research goal of this project was to better understand temporal and spatial trends of herbicide use within the context of San Luis …

Pressure Driven Desalination Utilizing Nanomaterials, Fangyou Xie

Master's Theses

Nanomaterials such as graphene oxide and carbon nanotubes, have demonstrated excellent properties for membrane desalination, including decrease of maintenance, increase of flux rate, simple solution casting, and impressive chemical inertness. Here, two projects are studied to investigate nanocarbon based membrane desalination. The first project is to prepare hybrid membranes with amyloid fibrils intercalated with graphene oxide sheets. The addition of protein amyloid fibrils expands the interlayer spacing between graphene oxide nanosheets and introduces additional functional groups in the diffusion pathways, resulting in increase of flux rate and rejection rate for the organic dyes. Amyloid fibrils also provide structural assistance to …

Valorization Of Carrot Processing Waste, Alexandra M. Duval

Master's Theses

Commercial carrot processors produce up to 175,000 tons of carrot waste annually. Carrot Mash (CM) is the term referring to the waste by-product of peeled baby carrot processing. Transportation of carrot processing waste is expensive due to its high- water content (approx. 83-95%). High in bioactive compounds (carotenoids) and dietary fibers, it is expected that its conversion into a value-added by-product is of interest to the carrot processing industry. Hemicellulose-rich plant materials have proven to be a source of oligosaccharides, which are known for their beneficial prebiotic activity. The objectives of this research were to: 1) determine the effect of …

Fabrication Of Miniaturized Paper-Based Microfluidic Devices (Micropads), E. Brandon Strong, Spencer A. Schultz, Andres Martinez, Nathaniel W. Martinez

Chemistry and Biochemistry

Microfluidic paper-based analytical devices (microPADs) are emerging as cost-effective and portable platforms for point-of-care assays. A fundamental limitation of microPAD fabrication is the imprecise nature of most methods for patterning paper. The present work demonstrates that paper patterned via wax printing can be miniaturized by treating it with periodate to produce higher-resolution, high-fidelity microPADs. The optimal miniaturization parameters were determined by immersing microPADs in various concentrations of aqueous sodium periodate (NaIO₄) for varying lengths of time. This treatment miniaturized microPADs by up to 80% in surface area, depending on the concentration of periodate and length of the reaction …

Adapting Cell-Free Protein Synthesis As A Platform Technology For Education, Grace W. Chu, Max Z. Levine, Nicole E. Gregorio, Javin P. Oza

STAR Program Research Presentations

Cell-free protein synthesis (CFPS) has emerged as an enabling biotechnology for research and biomanufacturing as it allows for the production of protein without the need for a living cell. Applications of CFPS include the construction of libraries for functional genomics and structural biology, the production of personalized medicine, and the expression of virus-like particles. The absence of a cell wall provides an open platform for direct manipulation of the reaction conditions and biological machinery. This project focuses on adapting the CFPS biotechnology to the classroom, making a hands-on bioengineering approach to learning protein synthesis accessible to students grades K-16 through …

Tof-Sims Analysis Of Plant Seed Interactions With Plant Growth-Promoting Bacteria, Tammy Pheuphong, Rachel Komorek, Xiao-Ying Yu

STAR Program Research Presentations

The use of time-of-flight secondary ion mass spectrometry (ToF-SIMS) in plant biology is a relatively unexplored and quickly developing field. The majority of research in plant SIMS involves the application of ToF-SIMS to study dried wood tissues, and only a handful of studies apply SIMS on plant stems, roots, and/or seeds. Our project provides a brief description and review of previous work using SIMS on plant stems, roots, and/or seeds, along with an emphasis on the sample preparation in each study. Additionally, the use of Brachypodium distachyon (Brachypodium) as a model system for research on grasses has also become more …

Characterization Of Reagent Pencils For Deposition Of Reagents Onto Paper-Based Microfluidic Devices, Cheyenne H. Liu, Isabelle C. Noxon, Leah E. Cuellar, Amanda L. Thraen, Chad Immoos, Andres W. Martinez, Philip J. Costanzo

Chemistry and Biochemistry

Reagent pencils allow for solvent-free deposition of reagents onto paper-based microfluidic devices. The pencils are portable, easy to use, extend the shelf-life of reagents, and offer a platform for customizing diagnostic devices at the point of care. In this work, reagent pencils were characterized by measuring the wear resistance of pencil cores made from polyethylene glycols (PEGs) with different molecular weights and incorporating various concentrations of three different reagents using a standard pin abrasion test, as well as by measuring the efficiency of reagent delivery from the pencils to the test zones of paper-based microfluidic devices using absorption spectroscopy and …

Paper Microzone Plates As Analytical Tools For Studying Enzyme Stability: A Case Study On The Stabilization Of Horseradish Peroxidase Using Trehalose And Su-8 Epoxy Novolac Resin, Kirsten A. Ganaja, Cory Chaplan, Jingyi Zhang, Nathaniel W. Martinez, Andres W. Martinez

Chemistry and Biochemistry

Paper microzone plates in combination with a noncontact liquid handling robot were demonstrated as tools for studying the stability of enzymes stored on paper. The effect of trehalose and SU-8 epoxy novolac resin (SU-8) on the stability of horseradish peroxidase (HRP) was studied in both a short-term experiment, where the activity of various concentrations of HRP dried on paper were measured after 1 h, and a long-term experiment, where the activity of a single concentration of HRP dried and stored on paper was monitored for 61 days. SU-8 was found to stabilize HRP up to 35 times more than trehalose …

Paper-Based Diagnostic Devices, Spencer A. Schultz, Isabelle C. Noxon, Tyler A. Sisley, Andres W. Martinez

Chemistry and Biochemistry

This chapter will provide an overview of existing diagnostic devices made primarily out of paper and then focus on paper-based microfluidic devices, the next generation of paper-based diagnostic devices that promises to extend the use of paper as a material for fabricating diagnostic devices well into the future.

Chapter Contents:

• 2.1 Introduction
• 2.2 Current paper-based diagnostic devices
• 2.2.1 Dipstick devices
• 2.2.2 Lateral-flow devices
• 2.2.2.1 Vertical-flow devices
• 2.2.3 Paper-based arrays
• 2.3 Paper-based microfluidic devices
• 2.3.1 Fabrication of paper-based microfluidic devices
• 2.3.2 Applications of paper-based microfluidic devices
• 2.4 Conclusions
• References

Phthalate Plasticizers Covalently Linked To Pvc Via Copper-Free Or Copper Catalyzed Axide-Alkyne Cycloadditions, Aruna Earla, Li Longbo, Philip Costanzo, Rebecca Braslau

Chemistry and Biochemistry

Plasticization of PVC was carried out by covalently linking phthalate derivatives via copper-free (thermal) or copper catalyzed azide-alkyne cycloadditions. Di(2-ethylhexyl) phthalate derivatives (DEHP-ether and DEHP-ester) were synthesized and appended to PVC at two different densities. The glass transition temperatures of the modified PVC decreased with increasing content of plasticizer. PVC-DEHP-ether gave lower glass transition temperatures than PVC-DEHP-ester, reflecting the enhanced flexibility of the ether versus ester linker.

An Examination Of Student Outcomes In Studio Chemistry, Alan L. Kiste, Gregory E. Scott, Jesse Paul Bukenberger, Miles Markmann, Jennifer Moore

Chemistry and Biochemistry

Twenty years ago, a major curriculum revision at a large, comprehensive university in the Western United States led to the implementation of an integrated lecture/laboratory (studio) experience for our engineering students taking general chemistry. Based on these twenty years of experience, construction of four purpose-built studio classrooms to house the majority of the remaining general chemistry courses was completed in 2013. A detailed study of the effects of the entire ecology of the studio experience on student success was initiated at that time. Data from content knowledge pre- and post-tests, learning attitudes surveys, and student course evaluations show positive effects …

Atomic Tiles: Manipulative Resources For Exploring Bonding And Molecular Structure, Alan L. Kiste, Rebecca G. Hooper, Gregory E. Scott, Seth Bush

Chemistry and Biochemistry

A simple manipulative resource, Atomic Tiles, is described for scaffolding the learning of Lewis structures without using algorithmic, rule-based methods of drawing. Students use Atomic Tiles to (1) create models of bonding that lead to drawing Lewis structures, (2) use the structures they create to infer patterns required for rational structures and common organic functional groups, (3) translate between Lewis structures and molecular models, and (4) use molecular models to identify isomers.

Gc Verification Of The Spacecraft Atmosphere Monitor, Jessica S. Castro, Richard D. Kidd, Jeffrey D. Hein

STAR Program Research Presentations

International Space Station crew members face the unique challenge of maintaining air quality due to the volatile organic compounds (VOCs) that have the potential to accumulate at unsafe levels. The Spacecraft Atmosphere Monitor (SAM) is a miniature gas chromatograph/mass spectrometer (GCMS) designed to measure major constituents (such as N₂, O₂ and CO₂) and trace VOCs within the cabin of the spacecraft. The gas chromatograph is responsible for separating the sample into its components in order to be characterized. The oven of the gas chromatograph must reach a temperature of 150°C in order to heat constituents …

Comparative Analysis Of In Situ Fibronectin Using Tof-Sims, Spi-Ms, And Dropdesi-Ms In A Microfluidic Reactor, Shannon Fasing, Xiao-Ying Yu, Juan Yao, Jiachao Yu

STAR Program Research Presentations

Fibronectin is an important biomolecule due to its role in cell differentiation, growth, kinesis, and adhesion. Such biological responses are mediated through membrane recognition and signaling; where fibronectin is found. Studying the outer molecular surface of fibronectin allows deeper insight into the microbiological reactions that occur during these processes. In situ mass spectrometry analysis in aqueous solution accurately represents fibronectin’s chemical components, made possible by a vacuum compatible microfluidic reactor, SALVI (System for Analysis at the Liquid Vacuum Interface). SALVI was paired with the analytical tools: time-of-flight secondary ion mass spectrometer (ToF-SIMS), single photon ionization mass spectrometer (SPI-MS) and drop …

Production And Harvest Of Microalgae In Wastewater Raceways With Resource Recycling, Alexander Colin Roberts

Master's Theses

Microalgae can be grown on municipal wastewater media to both treat the wastewater and produce feedstock for algae biofuel production. However the reliability of treatment must be demonstrated, as well as high areal algae productivity on recycled wastewater media and efficient sedimentation harvesting. This processes was studied at pilot scale in the present research.

A pilot facility was operated with nine CO₂-supplemented raceway ponds, each with a 33-m² surface area and a 0.3-m depth, continuously from March 6, 2013 through September 24, 2014. The ponds were operated as three sets of triplicates with two sets continuously fed …

Two-Ply Channels For Faster Wicking In Paper-Based Microfluidic Devices, Conor K. Camplisson, Kevin M. Schilling, William L. Pedrotti, Howard A. Stone, Andres W. Martinez

Chemistry and Biochemistry

This article describes the development of porous two-ply channels for paper-based microfluidic devices that wick fluids significantly faster than conventional, porous, single-ply channels. The two-ply channels were made by stacking two single-ply channels on top of each other and were fabricated entirely out of paper, wax and toner using two commercially available printers, a convection oven and a thermal laminator. The wicking in paper-based channels was studied and modeled using a modified Lucas–Washburn equation to account for the effect of evaporation, and a paper-based titration device incorporating two-ply channels was demonstrated.

Poly(N-Isopropylacrylamide) Hydrogels For Storage And Delivery Of Reagents To Paper-Based Analytical Devices, Haydn T. Mitchell, Spencer Schultz, Philip Costanzo, Andres W. Martinez

Chemistry and Biochemistry

The thermally responsive hydrogel N,N'-methylenebisacrylamide-cross-linked poly(N-isopropylacrylamide) (PNIPAM) was developed and evaluated as a reagent storage and delivery system for microfluidic paper-based analytical devices (microPADs). PNIPAM was shown to successfully deliver multiple solutions to microPADs in specific sequences or simultaneously in laminar-flow configuration and was found to be suitable for delivering four classes of reagents to the devices: Small molecules, enzymes, antibodies and DNA. PNIPAM was also able to successfully deliver a series of standard glucose solutions to microPADs equipped to perform a colorimetric glucose assay. The results of these tests were used to produce an external calibration …

Reagent Pencils: A New Technique For Solvent-Free Deposition Of Reagents Onto Paper-Based Microfluidic Devices, Haydn T. Mitchell, Isabelle C. Noxon, Cory A. Chaplan, Samantha J. Carlton, Cheyenne H. Liu, Kirsten A. Ganaja, Nathaniel W. Martinez, Chad Immoos, Philip Costanzo, Andres W. Martinez

Chemistry and Biochemistry

Custom-made pencils containing reagents dispersed in a solid matrix were developed to enable rapid and solvent-free deposition of reagents onto membrane-based fluidic devices. The technique is as simple as drawing with the reagent pencils on a device. When aqueous samples are added to the device, the reagents dissolve from the pencil matrix and become available to react with analytes in the sample. Colorimetric glucose assays conducted on devices prepared using reagent pencils had comparable accuracy and precision to assays conducted on conventional devices prepared with reagents deposited from solution. Most importantly, sensitive reagents, such as enzymes, are stable in the …

Paper-Based Standard Addition Assays, Cory A. Chaplan, Haydn T. Mitchell, Andres W. Martinez

Chemistry and Biochemistry

Standard addition assays conducted on paper-based microfluidic devices are introduced as an alternative to external standards for calibrating quantitative tests. To demonstrate this technique, a colorimetric, paper-based, standard addition assay was optimized for the determination of glucose concentrations in the range of 0 to 5 mM. Comparable results were obtained from the assay via digital image colorimetry under three different lighting conditions.

The Influence Of Hydrogeomorphology, Soil Redox Conditions, And Salinity On The Spatial Zoning Of Saltgrass, Salt Rush, And Cattails In Scotts Creek Marsh, Swanton Pacific Ranch, Ca, Mark D. Gormley

Master's Theses

Scotts Creek Marsh (SCM) is a small coastal wetland ecosystem in Davenport, CA. The vegetation of SCM is dominated by three halophytic zones comprised of saltgrass, salt rush, cattails. The objectives of the study were (i) to investigate the variables that influence the zoning of the three dominant halophyte communities in SCM and (ii) to the test the effectiveness of Indicator of Reduction in Soil (IRIS) tubes to indicate the reduction of S. The study examined the following parameters from April 6 to July 21, 2013: (i) the HGM of Scotts Creek Marsh, (ii) soil oxidation and reduction (redox) conditions, …

Lipid Production By Microalgae Treating Municipal Wastewater, James Edward Kelley

Master's Theses

Microalgae hold much promise as a feedstock in liquid biofuel production. Lipid content of microalgae cells range from 30-80% dry weight of biomass. It is projected that microalgae can produce between 1,000-6,500 gallons/acre/year of oil. Currently, production of industrial algae operates in open raceway ponds that use minimal capital and energy inputs to culture algae. Raceway ponds can also be used to grow microalgae from municipal waste streams. Although high biomass productivity can be achieved in these systems, there remains a large production gap between large volumes of biomass cultivation and high lipid content from microalgae cells. Low lipid content …

Synthesis And Evaluation Of Thermally-Responsive Coatings Based Upon Diels–Alder Chemistry And Renewable Materials, Dahlia N. Amato, Gregory A. Strange, John P. Swanson, Anton D. Chavez, Suzanne E. Roy, Kim L. Varney, Craig A. Machado, Douglas V. Amato, Philip Costanzo

Chemistry and Biochemistry

A soybean based coating with thermally responsive Diels–Alder linkages has been prepared following an automotive 2-component formulation. The resulting coatings displayed the capability to be healed following physical deformation by a thermal stimulus, and such a material has significant potential for end users. Various curing agents were employed, and resulted in variation of scratch resistance and re-healablity. Different thermally responsive soybean resins were synthesized to have varying amounts reversible and nonreversible linkages when incorporated into the coating. Additionally, different isocyanates were added at differing ratios of NCO:OH in search of the optimum coating. It was found through the analysis of …

Effects Of Composition And Separation Techniques On The Structure Of Aggregates In The Milk Fat Globular Membrane, Tristan Dilbeck, Jose Ibarra, Rafael Jimenez-Flores, Tracey Nguyen

STAR Program Research Presentations

The milk fat globular membrane (MFGM) is a complex structure composed mainly of phospholipids, sphingolipids, and membrane specific proteins. The composition and size of the MFGM differs based on the isolation, purification, and techniques used in analysis of the membrane as well as physiological, chemical, and mechanical factors present during its creation. The purpose of this experiment is to analyze the effects of separation techniques and composition of lipids and proteins on the structure of aggregates in the MFGM. The aggregates found in whey protein isolate (95% pure whey protein), whey buttermilk (whey protein and phospholipids), and sweet buttermilk (whey …

Paper And Toner Three-Dimensional Fluidic Devices: Programming Fluid Flow To Improve Point-Of-Care Diagnostics, Kevin M. Schilling, Daisy Jauregui, Andres W. Martinez

Chemistry and Biochemistry

We present a new method for fabricating three-dimensional paper-based fluidic devices that uses toner as a thermal adhesive to bond multiple layers of patterned paper together. The fabrication process is rapid, involves minimal equipment (a laser printer and a laminator) and produces complex channel networks with dimensions down to 1 mm. The devices can run multiple diagnostic assays on one or more samples simultaneously, can incorporate positive and negative controls and can be programmed to display the results of the assays in a variety of patterns. The patterns of the results can encode information, which could be used to identify …

Optimizing Electrode Design For Microbial Fuel Cells Used For Wastewater Treatment, Lindsay Nichols, John A. Hogan

STAR Program Research Presentations

Microbial fuel cells (MFC) utilize bacteria to generate an electrical current that can be used in the decomposition of sludge and human urine. In a MFC there is an anode (for oxidation of organic compounds), cathode (reduction of oxygen or carbon dioxide), and a proton exchange membrane (PEM, allows protons to migrate); reduction-oxidation reactions between the anode and cathode produce a measurable current. Bacteria that are found in sludge can be used to produce electrons in a voltaic cell, but optimizing conditions for harnessing the energy is crucial to making a MFC efficient. Research has shown that the ratios of …

Using Stable Isotope Analysis Of Zooplankton To Document Trophic And Biogeochemical Changes In The San Francisco Estuary, Steven C. Westbrook, Julien Moderan

STAR Program Research Presentations

Zooplankton represent a vital link between phytoplankton and fish, like the endangered Delta Smelt. Human interferences (nitrates from waste water, flow alteration, invasive species introduction…) have altered the structure of the San Francisco Estuary (SFE) ecosystem. We use stable isotope analysis to improve our knowledge of the planktonic food web in the SFE and gain insights into its evolution over the past decades. We use the ratios of certain isotopes (Nitrogen, Carbon, Sulfur, etc.) in different species of zooplankton to tell us what it is feeding on as well as the trophic level it feeds in. My research focused on …

Quantification And In Vitro Analysis Of Nanolipoproteins (Nlps) Containing Adjuvants, Purna Venkataraman, Craig Blanchette, Nicholas O. Fischer

STAR Program Research Presentations

Nanolipoprotein particles (NLPs) self-assemble into nanoscale structures that can be used as vaccines or drug delivery agents. Due to the nature of the NLPs, a variety of immune stimulating compounds or adjuvants can be readily incorporated into NLPs: a characteristic difficult to engineer into most other nanoscale platforms. In light of this, a method for quantifying the amount adjuvant actually incorporated into NLPs is a question of high importance. Through the use of reverse phase High-Performance Liquid Chromatography (HPLC) and an Evaporative Light Scattering Detector (ELSD), standard curves can be constructed by analyzing mixtures of NLP components of known concentration, …

Strawberry Growth, Yield, Fruit Nutrition, And Control Of Verticillium Wilt With Pre-Plant Soil Fumigants, Ozone, And Biological Control, Justin J. Scurich

Master's Theses

Verticillium wilt is a widespread soilborne disease of strawberry historically controlled by soil fumigation with methyl bromide (MB). MB was banned by the United Nations in 1995 and will be completely phased out by 2015. Research has concentrated on alternative methods of disease control without finding a single alternative able to replace MB in widespread disease control and yield increase. For the current study, strawberries were greenhouse grown in container pots filled with soil from both infested and non-infested areas of a commercial strawberry field in Watsonville, CA. Treatments included pre-plant soil fumigation with commercially available formulations of methyl bromide, …

Correction To Fully Enclosed Microfluidic Paper-Based Analytical Devices, Kevin M. Schilling, Anna L. Lepore, Jason A. Kurian, Andres W. Martinez

Chemistry and Biochemistry

There is an error in the units of the concentrations of potassium iodide and trehalose described in the experimental details on page 1581. The correct concentrations are 0.6 M potassium iodide and 0.3 M trehalose.