Systems Engineering Commons^™

Task Optimization Utilizing Digital Transformation Concepts - Automation Project Execution Via Agile Methodology, Anthony Steven Maiello

Theses and Dissertations

Task Optimization via the use of automated process improvements is becoming more widespread as more industries lean into the concepts surrounding digital transformation. This shift also necessitates a complementary adaptation in project management methodologies to support the rapid and ever-changing environment, requirements, and innovations. This thesis examines the effectiveness of Agile methodology in managing digital automation projects, with a specific focus placed on process improvements with systems engineering. It accomplished this by contrasting the original model, designed and derived utilizing traditional project management techniques, with the proposed model which is a direct result of the application of Agile project practices. …

High-Level Requirements For Conceptual Design Of Bridge Deflection Measurement System Using Model-Based Systems Engineering, Mariana Villalabeitia Arenas

Theses and Dissertations

Bridges are essential in the infrastructure transportation system. Repairs and maintenance are the key activities to keep them safe for use. Over the years, the evolution of technology has been applied to improve the way bridges are designed, built, monitored, inspected, and repaired. Nevertheless, there is still a gap between the research efforts and the application of this knowledge in the practical field of bridge inspections. Model-based Systems Engineering is a formalized methodology in the system design that is centered around the model throughout all the life cycle stages of a system, supporting the requirements, design, analysis, verification, and validation …

Modeling The Impact Of Scheduling Risks On Multi-Team Agile Projects, Bria Marie Booth

Theses and Dissertations

Agile project management allows for a quick response to a changing project environment. This opens possible avenues for new opportunities, but also may expose ongoing projects to previously unknown or unexpected threats. Risks must be continuously monitored as a product is worked on to avoid lost potential. This paper will propose a discrete event simulation model that multi-team projects may use to predict the impact to the project’s schedule. Using discrete event simulation early in the project’s planning cycle offers a greater understanding of the possible or probable impact of risks on the schedule. This would help to prepare project …

Geometric Inference In Machine Learning: Applications Of Fisher Information For Model Selection And Other Statistical Applications, Trevor Herntier

Theses and Dissertations

We consider the problem of model selection using the Minimum Description Length (MDL) criterion for distributions with parameters on the hypersphere. Model selection algorithms aim to find a compromise between goodness of fit and model complexity. Variables often considered for complexity penalties involve number of parameters, sample size and shape of the parameter space, with the penalty term often referred to as stochastic complexity. Because Laplace approximation techniques yield inaccurate results for curved spaces, existing criteria incorrectly penalize complexity. We demonstrate how the use of a constrained Laplace approximation on the hypersphere yields a novel complexity measure that more accurately …

Causal Modeling Framework For Nuclear Power Plant Licensing Process, Lauren Kimberly Kiser

Theses and Dissertations

Interests in clean energy revived the nuclear power industry. For the first time in decades, innovative technologies and plant designs are being considered by regulatory agencies. This dissertation explores a Bayesian Network and AHP approach to causal modeling of the Combined License review process for new nuclear power plants (NPP). Historically lengthy and expensive, NPP licensing is critical to ensuring safe operation of the plants. With this comes a high standard for applicants to reach that can result in multiple revision cycles and long review times. New plant designs and fluctuating public support lead to a complex and dynamic series …

Model Based Systems Engineering Approaches To Chemicals And Materials Manufacturing, Quang Le

Theses and Dissertations

Model-based systems engineering (MBSE) is part of a long-term trend toward model-centric approaches adopted by many engineering disciplines. This work establishes the need for an MBSE approach by reviewing the importance, complexity, and vulnerability of the U.S. chemical supply chains. The origins, work processes, modeling approaches, and supporting tools of the systems engineering discipline (SE) are discussed, along with the limitations of the current Process Systems Engineering (PSE) framework. The case is made for MBSE as a more generalizable and robust approach. Systems modeling strategies for MBSE are introduced, as well as a novel MBSE method that supports the automation …

Practical Requirements Elicitation In Modern Product Development: A Multi-Case Study In Discontinuous Innovation, Michael King

Theses and Dissertations

Practical modern product development, specifically rapid, lean efforts to create new disrupting or specialized products, face constraints that require modified requirements elicitation (RE) techniques. Requirements elicitation conventions have not been updated to address the challenges of these approaches, and industry practitioners lack the tools to select the most efficient techniques. This study examines the RE approaches performed by three resource-limited teams conducting discontinuous new product development through a multi-case study to identify gaps between the literature and practice, with suggestions to fill them. Our findings suggest modern RE practices and challenges closely reflect those found by studies on RE in …

Towards Structured Planning And Learning At The State Fisheries Agency Scale, Caleb A. Aldridge

Theses and Dissertations

Inland recreational fisheries has grown philosophically and scientifically to consider economic and sociopolitical aspects (non-biological) in addition to the biological. However, integrating biological and non-biological aspects of inland fisheries has been challenging. Thus, an opportunity exists to develop approaches and tools which operationalize planning and decision-making processes which include biological and non-biological aspects of a fishery. This dissertation expands the idea that a core set of goals and objectives is shared among and within inland fisheries agencies; that many routine operations of inland fisheries managers can be regimented or standardized; and the novel concept that current information and operations can …

Developing An Early Life Cycle Manufacturability Assessment For Conceptual Designs, Tonya Gamblin Mccall

Theses and Dissertations

Studies have shown that 70 – 80% of a product's life cycle costs are committed by the end of the product design phase (Anderson, 2014; National Research Council, 1991; Swift, 1987). This supports the general claim that decision making in the conceptual stage drives the cost throughout the life cycle. The use of concurrent engineering has been viewed as the answer to this problem, offering the Design for Excellence (DFX) as one approach for evaluating product designs across specific disciplines. This research focuses on a subset of DFX referred to as Design for Manufacturability to develop a means to assess …

A Methodological Framework For Parametric Combat Analysis, Dustin L. Hayhurst Sr.

Theses and Dissertations

This work presents a taxonomic structure for understanding the tension between certain factors of stability for game-theoretic outcomes such as Nash optimality, Pareto optimality, and balance optimality and then applies such game-theoretic concepts to the advancement of strategic thought on spacepower. This work successfully adapts and applies combat modeling theory to the evaluation of cislunar space conflict. This work provides evidence that the reliability characteristics of small spacecraft share similarities to the reliability characteristics of large spacecraft. Using these novel foundational concepts, this dissertation develops and presents a parametric methodological framework capable of analyzing the efficacy of heterogeneous force compositions …

Value Focused Thinking Analysis Of C-Band Australia Radar Operations, Samuel Ray Grothman

Theses and Dissertations

The radars used for Space Domain Awareness (SDA) are inherently all-weather, day/night sensors capable of around the clock operations. Despite this fact, some radars are operated for fewer than their maximum operating capabilities. The decision-making process for selecting the operating hours of a sensor has historically been based on only a few factors or just one. This research uses the techniques in Value Focused Thinking to develop an evaluation process to score possible alternatives and find the alternative with the most value for the decision maker. By investigating the value that is added by operating an SDA radar, it is …

Assessing Readiness For Implementation Of Prognostics And Health Management In Small And Medium Enterprises, Sara C. Fuller

Theses and Dissertations

Prognostics and Health Management (PHM) refers to using robust sensing, monitoring, and control to detect, assess, and track system health degradation and failure modes, allowing for enhanced management and operational decisions. The need for PHM within a manufacturing facility has increased due to a variety of reasons, such as the increasing complexity of manufacturing equipment.

A lack of readiness for digital implementations is linked to failure. The literature highlights certain barriers and enablers that can signal whether a technology implementation will be successful, such as management and maintenance employees’ desire to change the existing process, an understanding and willingness to …

A Model-Based Approach To Cubesat Propulsion And Payload Analysis, Madeline H. Johnson

Theses and Dissertations

Currently, there are only limited ways to increase mission success of CubeSats in terms of component and mission compatibility. The Payload Analysis Tool (PAT), developed by Air Force Institute of Technology (AFIT) students, combines the power of multiple tools to analyze payload compatibility on a single CubeSat bus. The PAT simulates a CubeSat mission with a variety of payloads to better understand how the payloads interact with the bus in terms of power, data rate, and memory, but it lacks a propulsion system. This thesis research advances the PAT by including a propulsion system which allows for increased mission time …

Development Of Simulation Framework For Impact Analysis Of Launch Delays On Lunar Base Station, Giulio Cristello

Theses and Dissertations

Humans have not ventured beyond Earth since the days of the Apollo missions. NASA astronauts were the first and last to set foot on the lunar surface, and it is again thanks to NASA that the initiative to go back to the Moon is moving forward. The Artemis missions will land men and women on the lunar surface with the purpose of establishing a long-term presence on the Moon. The current Artemis Plan includes the Artemis Base Camp, a lunar base stationed on the lunar South Pole. The maintenance of the base will require frequent missions to be performed in …

Complexity Analysis And Parallel Implementation Of The Well Optimized Linear Finder (Wolf) Atmospheric Turbulence Compensation (Atc) Algorithm On Gpu Technology With Comparative Analysis Of Traditional Phase Diverse Atc Methods, Yang Xin

Theses and Dissertations

A new high-speed, high-accuracy general transfer function estimation method for diversitybased problems, known as the Well Optimized Linear Finder Algorithm (WOLF Algorithm), has been developed [1]. Compared to the traditional phase diversity ATC methods, the WOLF Algorithm has less computational complexity and better approximation of the Optical Transfer Function (OTF) and consequently the entrance pupil phases. We compare the time complexity between the traditional Phase Diversity atmospheric turbulence compensation approach and the WOLF Algorithm. The results show that the WOLF Algorithm is dramatically faster than traditional phase diversity methods theoretically. We also implement the time complexity results of the WOLF …

Computational Speed Improvement Of The Well Optimized Linear Finder (Wolf) Transfer Function Estimation Methodology For Phase-Diverse Atmospheric Turbulence Compensation (Atc) Applications Using Pre-Calculated, Parallel Complex Exponential Phase Difference Chains, Erlin He

Theses and Dissertations

The Well-Optimized Linear Finder (WOLF) high-speed, phase-dominant, transfer function estimation method was developed by Professor William W. Arrasmith at Florida Institute of Technology. The novel, high-speed, transfer function estimation method is robust and can be applied to atmospheric turbulence compensation (ATC)/blind deconvolution optical imaging problems. The WOLF methodology uses a diversitybased approach with an adapted error metric to quickly remove effects of atmospheric turbulence and system noise effects present in an incoherent, optical imaging system. In this research, we improve performance of the WOLF algorithm by investigating the impact of applying parallel processing technology to pre-calculate an expanding set of …

Model-Based Operational Performance Evaluation Of Augmented Reality Applications In Supported Employment Training, Ruo Lun Pan

Theses and Dissertations

Supported employment is a service provided by social enterprises to help persons with disabilities (PWD) to assimilate into their work environment and maintain their jobs for as long as possible. Social enterprises that provide such services are able to receive incentives from the government but they still rely on a limited funding. Augmented reality (AR) has been tested in various fields such as remote support and training employees, including PWDs. This thesis aims to evaluate the operational performance of augmented reality in supported employment using a model-based systems engineering approach paired with a simulation model. The simulation model evaluates three …

Developing A Model-Based Approach To Forecast A Competitor's System, Christopher A. Del Vecchio

Theses and Dissertations

The purpose of this research is to develop a model-based approach to intelligence forecasting of a competitor’s system. This analysis currently uses a document-based practice to capture all knowledge of the forecast and its development. A framework of antithesis processes, or Anti-Processes, were derived from the systems engineering technical processes. This was then combined with analytical tradecraft from the field of competitive technical intelligence to build a SysML reference model, which was then applied to a small case study to enhance and refine the model. The Anti-Process framework and SysML reference model provide a rigorous, model-based approach to intelligence forecasts …

Networked Cooperative Autonomous Munitions Digital Twin Modeling Utilizing Model Based Systems Engineering, Christopher R. Reed

Theses and Dissertations

An example of a high-complexity system is a swarm of Networked Cooperative Autonomous Munitions (NCAM) that prioritize wide area search and multiple view target confirmation. First, this research discusses methods toward building behavioral models within a Model-Based Systems Engineering (MBSE) tool. Then, this research presents the parallel modeling effort of NCAM in two environments: the MBSE model in Cameo Systems Modeler, and a physics-based model in the Advanced Framework for Simulation, Integration, and Modeling (AFSIM). Each digital model in its environment provides distinct benefits to the stakeholders of the design process, so the models must present consistent and parallel information. …

Geometric Generation Through The Merging Of Sysml, And Engineering Sketch Pad, Alexander J. Miesle

Theses and Dissertations

The United Stated Department of Defense (DoD) and Air Force (USAF) have placed increased emphasis on the utilization of modern systems engineering (SE) practices within the current and future acquisitions lifecycle. This call is driven by the current rate at which near-peer adversaries such as Russia and China are increasing their defense system capabilities and catching up or surpassing the Unites States in certain operational regions. To aid in the transition to a Digital Engineering and Digital Twin dominated acquisitions process, this thesis presents a method with which SysML and geometric tools can be linked within both new and existing …

Development And Assessment Of A Model-Based Framework On User Toolkits, Brandon J. Koury

Theses and Dissertations

The Department of Defense (DoD) has a limited number of resources to accomplish a variety of missions which involve deploying personnel to support and maintain aircraft operating throughout the world. The DoDs maintenance structure codes maintainers to perform maintenance on specific airframes. This structure limits the flexibility of maintainers and leads to deploying resources in a reactionary manner to address capability gaps in deployed environments. The Just-In-Time Multi-Mission Airman (JIT MMA) concept aims to resolve these issues. Currently, the necessary technologies are unknown, but user toolkits are a concept to consider. A user toolkit is a concept that allows users …

Improving Task-Operator Analysis For Training Through The Integration Of Human Learning Taxonomies And Systems Engineering Models, James M. Earley

Theses and Dissertations

Training is a critical part of force sustainment, but the life-cycle cost of recurring training can be quite high. Further, the promotion of the Multi-Capable Airman (MCA) concept leads to questions on how best to train airmen on tasks outside of their core career field. The MCA concept, coupled with continued increase of technology effectiveness, incentivize the replacement of formerly in-residence-only training with distance training that enables Just-in-Time (JIT) learning. However, effective implementation of the MCA concept may also require adaptive training which considers the knowledge, skills, and attitudes (KSAs) developed by a trainee within their core career field when …

Quantifying Project Complexity To Resource Project Managers, Jereme R. Henrard

Theses and Dissertations

This research develops a multi-criteria decision analysis model to quantify project complexity and inform decision-makers in resource-constrained organizations with the Tyndall Program Management Office (PMO) as a case study. The complexity score is used as a risk metric to determine the appropriate number of skilled or novice project managers to effectively manage the PMO portfolio to mitigate cost and schedule overruns. The research provides an innovative approach to consider manning levels at the PMO and other project management-focused organizations/sections.

Characterizing Complex-Valued Neural Network Model Approximations Of 4-Input 4-Output Complex-Valued Reference Block Models, Larry C. Llewellyn Ii

Theses and Dissertations

System simulation models are often decomposed and abstracted as a collection of interconnected subsystem block models to facilitate system understanding, design, and analysis. Each subsystem block model contains mathematical functions that receive, process, and transmit signals that are modeled as real numbers, complex numbers, and/or logic values. This dissertation evaluates the use of a single two-layer complex-valued neural network model to approximate 4-input, 4-output subsystem reference block models in terms of accuracy, performance, and error. The research is novel in that it uses a neural network for continuous function approximation instead of data categorization; it uses a neural network designed …

A Decadal Analysis Of Shifts In Engineering Manufacturing Development Factors For Dod Assets, Michael J. Smith

Theses and Dissertations

This research involves the analysis of standard parametric factors by decade within the development stage of acquisitions. Analysts use factors to develop budgets, create a baseline for measuring project progress, or as a crosscheck to the other estimating techniques. This research analyzed data from 408 1921s across seven decades and eight work breakdown structure (WBS) elements. It further analyzed these decades by commodity type, contract and contractor type, and service branch. The statistical tests used in this research determined which decades within our categories were dissimilar and drew conclusions about the impact of those differences. These tests determined that factors …

A Thematic And Reference Analysis Of Touchless Technologies, Eric R. Curia

Theses and Dissertations

The purpose of this research is to explore the utility and current state of touchless technologies. Five categories of technologies are identified as a result of collecting and reviewing literature: facial/biometric recognition, gesture recognition, touchless sensing, personal devices, and voice recognition. A thematic analysis was conducted to evaluate the advantages and disadvantages of the five categories. A reference analysis was also conducted to determine the similarities between articles in each category. Touchless sensing showed to have the most advantages and least similar references. Gesture recognition was the opposite. Comparing analyses shows more reliable technology types are more beneficial and diverse.

Accelerating Transition To Production By Manufacturing Readiness Focus During Development, William K. Duncan

Theses and Dissertations

The Department of Defense has adopted management tools, such as Manufacturing Readiness Levels (MRLs), which seek to address issues that have delayed the transition to production and delivery of deployment-ready systems. The MRL scale and assessment process institutes periodic reviews of products during the acquisition process. Specifically, MRLs provide a scale to measure, and importantly communicate, progress by evaluating and summarizing multiple aspects of product maturity. Unfortunately, issues are often identified during the periodic assessments which, if addressed earlier, would have further streamlined product delivery. The current research applies Model Based System Engineering tools to analyze and refine organizational structures …

Exploring The Value Of Training System Alternatives Through Methods Technologies, And Relevant Attributes, Brian R. Novitsky

Theses and Dissertations

Skilled maintainers are being lost at a higher rate than average of all enlisted career fields within the Air Force. Although incentive programs can provide some retention, attrition rates may continue to vary, placing the readiness of the warfighter in jeopardy. Additionally, the technologies used to train maintainers have evolved substantially, including augmented reality (AR) and virtual reality (VR) solutions, among others. These technologies have recently gained notoriety as novel ways to increase training effectiveness, providing avenues for maintainers to achieve greater skill levels at a faster rate than traditional platforms. Through semi-structured subject matter expert (SME) interviews, this qualitative …

Testing Of Methods For Reducing Motivational Bias In Multi - Criteria Decision Analysis Problems, Chadwick Samuel Kerr

Theses and Dissertations

The idea of multi-criteria decision making has been around for quite a while. All judgement tasks are potential points of bias introduction. Each judgement task was assessed to identify common biases introduced through an extensive literature review for each task and bias. In several other studies, the distinction is made between cognitive and motivational biases. Cognitive biases are widely studied and well known with mitigations that have been validated. Motivational biases are judgements influenced by the decision maker’s desire for a specific outcome, also referred to as intentional bias, that are hard to correct and received very little testing and …

Deep Multi-Modal U-Net Fusion Methodology Of Infrared And Ultrasonic Images For Porosity Detection In Additive Manufacturing, Christian E. Zamiela

Theses and Dissertations

We developed a deep fusion methodology of non-destructive (NDT) in-situ infrared and ex- situ ultrasonic images for localization of porosity detection without compromising the integrity of printed components that aims to improve the Laser-based additive manufacturing (LBAM) process. A core challenge with LBAM is that lack of fusion between successive layers of printed metal can lead to porosity and abnormalities in the printed component. We developed a sensor fusion U-Net methodology that fills the gap in fusing in-situ thermal images with ex-situ ultrasonic images by employing a U-Net Convolutional Neural Network (CNN) for feature extraction and two-dimensional object localization. We …