Other Operations Research, Systems Engineering and Industrial Engineering Commons^™

Simulation Model To Investigate Flexible Workload Management For Healthcare And Servicescape Environment, Michael Thorwarth, Paul Harper, Amr Arisha

Conference papers

High demand and poor staffing conditions cause avoidable pressure and stress among healthcare personnel which results in burnout symptoms and unplanned absenteeism which are hidden cost drivers. The work environment within an emergency department is commonly arranged in a flexible workload which is highly dynamic and complex for the outside observer. Using detailed simulation modeling within structured modeling methods, a comprehensive model to characterize the nurses' time utilization in such flexible dynamic workload environment was investigated. The results have been used to derive a generalized analytic expression that describes certain settings that lead to an instable queuing system with serious …

Analysis And Selection Of New Rental Paintball Masks For Gladiator Paintball Park, Geoff Wakefield

Industrial and Manufacturing Engineering

This project is designed to select new rental paintball masks for Gladiator Paintball Park. The currently used rental masks are worn down and need replacement. Criteria for new rental masks are examined and include customer preferences, owner's constraints, and time studies. Candidate masks were found by asking customers what they like in rental masks, interviewing other paintball field owners, and referring to the online paintball community. Three candidate masks were found, the V-Force Vantage, JT Alpha, and Kingman java paintball masks. These masks were compared to the currently used rental masks, the V-Force Armor. Customers were surveyed to find out …

Acs Custom Creation's New Business And Assembly Operations, Kent Christensen

Industrial and Manufacturing Engineering

ACS Custom Creations had assembly and business operations that wasted time and wasted money. The objective of the project is to improve and implement ACS Custom Creations business and manufacturing operations. The proposed assembly process involves the rearranging of the bottlenecked steps to eliminate constraints. The assembly workstations were also redesigned to reduce cycle time. With the improvement of the new assembly and business operations, ACS is poised to grow into a bigger company. Financial Statements were created to improve visibility of the company’s historical data. These financial statements include an income statement, balance sheet, and a cash flow statement. …

Solder Qwik Pentm, Katherine E. Robbins

Industrial and Manufacturing Engineering

Electronics soldering is a technique used frequently in the manufacturing of Printed

Circuit Boards (PCB) to attach small electronic parts or wires together. Often times

the need to remove a solder joint arises; this is known as desoldering. Solder wick,

fine braided copper wire infused with rosin, is one of the most effective ways to

desolder because it results in the cleanest joints. Currently using solder wick

involves several time consuming and somewhat awkward steps. This report will

cover the process behind designing, manufacturing, and testing a new ergonomic,

dispenser for solder wick that can be used with one hand. …

The Root Causes Of Errant Ordered Radiology Exams, Benjamin Duman

Boise State University Theses and Dissertations

The purpose of this research was to determine why there was a high number of errant radiology orders from requesting physicians at ATA Hospital. As the researcher, I wanted to clearly define errant orders, determine the root causes of errant orders, and further, make recommendations that would help diminish current as well as future order errors. This study answers three research questions: RQ1. Exactly what are the performance problems associated with errant orders within ATA Hospital’s radiology department that warrant further research? RQ2. What causes the increase in errant radiological orders at ATA Hospital? And, RQ3. What types of performance …

Can We Make Accounting Relevant Again? Non-Traditional Accounting Systems Can Drive Productivity And Future Prosperity, Mark Doggett

Mark Doggett

No abstract provided.

Course Portfolio - Discrete Event Simulation, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This course portfolio, written by Dr. Paul Savory, provides an overview of his Discrete Event Simulation course at the University of Nebraska-Lincoln. It offers an overview of the course goals, a summary of the classroom activities for achieving them, and a detailed assessment of student learning. He highlights his introduction of the simul8 programming environment to his students. In addition to exploring his students’ learning, Dr. Savory also explores different approaches for documenting his teaching by including multimedia clips (video and audio), uses graphs, uses color, and incorporates images. The resulting portfolio is one that can be reviewed, shared, and …

Enabling Rfid Technology In Irish Hospitals, Khaled Ismail, Amr Arisha

Conference papers

Hospitals represent a significant part of healthcare systems and account for no less than 60% of the entire healthcare service in most of developed countries. Therefore, improving service in hospitals is an important element to the process of healthcare reform. Better use of resources, more consistent quality, and a higher service level are the keys to rationalise the huge expenditure in healthcare systems due to higher growth in demand. Even though massive spending has been directed towards hospital improvement in Ireland, services provided in Irish hospitals are ranked relatively low comparing to the other European countries. Growth of population, aging, …

Risk Assessment Model For Emergency Departments In Dublin Hospitals, Michael Thorwarth, Amr Arisha

Conference papers

The internal dynamics of emergency departments (ED) in Irish hospitals represent complex non-linear stochastic systems with an environment of uncertainty, variability and limited resources. Planning and managing such systems pose overwhelming demands. To improve operations, patient service, resource planning, and real-time reaction to unexpected events, sophisticated tools to efficiently achieve these goals must be applied.

Advanced solution techniques (e.g. simulation and optimisation) have been successfully applied in manufacturing operations to improve the delivery, cost-effectiveness and service quality. Yet, random arrival of patients, limited resources and multitasking are challenges in EDs that add more complexity to this critical area. This study …

Optimisation Methods In Supply Chain Applications: A Review, Amr Arisha, Waleed Abo Hamad

Conference papers

The competitiveness and dynamic nature of today’s marketplace is due to rapid advances in information technology, short product life cycles and the continuing trend in global outsourcing. Managing the resulting supply chain networks effectively is a complex and challenging task which is imputable to high level of uncertainty in supply-demand, conflict objectives, vagueness of information, numerous decision variables and constraints. With such level of complexity in the environment, supply chain optimisation has a potential to make a significant contribution to resolve the challenges. In this paper, a literature review – based on more than one hundred peer-reviewed articles – of …

Synthesis, Interdiction, And Protection Of Layered Networks, Kevin T. Kennedy

Theses and Dissertations

This research developed the foundation, theory, and framework for a set of analysis techniques to assist decision makers in analyzing questions regarding the synthesis, interdiction, and protection of infrastructure networks. This includes extension of traditional network interdiction to directly model nodal interdiction; new techniques to identify potential targets in social networks based on extensions of shortest path network interdiction; extension of traditional network interdiction to include layered network formulations; and develops models/techniques to design robust layered networks while considering trade-offs with cost. These approaches identify the maximum protection/disruption possible across layered networks with limited resources, find the most robust layered …

Developing A Tool For The Location Optimization Of The Alert Aircraft With Changing Threat Anticipation, Okan Arslan

Theses and Dissertations

The threat to the airspace is posed by the outside world in conventional terms as well as hostilities from within the airspace such as hijacked aircraft. Alert aircraft are located with the sole responsibility of responding to any incident. Different regions of the airspace may have different alert states depending on current intelligence input. Due to non-constant states of threat level, the Turkish Air Force must deploy aircraft to cover the more sensitive regions with a greater number of aircraft with a relatively short response time. This research deals with the problem by developing a tool for the location optimization …

Using Multiple Robust Parameter Design Techniques To Improve Hyperspectral Anomaly Detection Algorithm Performance, Matthew T. Davis

Theses and Dissertations

Detecting and identifying objects of interest is the goal of all remote sensing. New advances, specifically in hyperspectral imaging technology have provided the analyst with immense amounts of data requiring evaluation. Several filtering techniques or anomaly detection algorithms have been proposed. However, most new algorithms are insufficiently verified to be robust to the broad range of hyperspectral data being made available. One such algorithm, AutoGAD, is tested here via two separate robust parameter design techniques to determine optimal parameters for consistent performance on a range of data with large attribute variances. Additionally, the results of the two techniques are compared …

A Hybrid Templated-Based Composite Classification System, Michael A. Turnbaugh

Theses and Dissertations

An automatic target classification system contains a classifier which reads a feature as an input and outputs a class label. Typically, the feature is a vector of real numbers. Other features can be non-numeric, such as a string of symbols or alphabets. One method of improving the performance of an automatic classification system is through combining two or more independent classifiers that are complementary in nature. Complementary classifiers are observed by finding an optimal method for partitioning the problem space. For example, the individual classifiers may operate to identify specific objects. Another method may be to use classifiers that operate …

A Decision Support System For Capacity Management, Anton Slobodnik

Industrial and Manufacturing Engineering

Every manufacturer faces the challenge of managing production capacity. How effectively a company meets required capacity as compared to competitors will be a determinant of profitability and success.

This paper details the creation of a best of breed software that can act as a decision support system and help planners reschedule work, add shifts and make sure that the master production schedule is feasible before putting it into an MRP system.

As a part of my senior project I’ve created a Rough-Cut Capacity Tool that takes lead time into account and performs basic what if analysis on level loading a …

Optimization Of Lifeguard Towers, Equipment, And Sign Placement With Human Factors Considerations For The Cal Poly Recreation Center Expansion, Brian J. Henrikson

Industrial and Manufacturing Engineering

Cal Poly’s Recreation Center serves many faculty, students and alumni by providing them with a safe and fun environment to work out and swim. An overwhelming majority of students voted for a Recreation Center expansion to handle the increased usage of the Center over the past few years. The focus of this report is the safe and effective operations of the pool deck and the lifeguard staff. Three surveys were created to see what the lifeguard staff, as well as pool users, thought about the current pool deck and what they would like to see in the new pool deck …

Design Of An 8-Channel Data Acquisition System For Measuring Diode Junction Temperature, Jason Maynard

Industrial and Manufacturing Engineering

The solid state lighting industry is striving to expand the use of light emitting diodes (LEDs) in more applications, particularly in high brightness applications. As the power of LEDs increase, heat removal becomes a critical issue. To improve device lifetime, quantum efficiency, and LED colour, the diode p-n junction temperature (Tj) must be kept to a minimum. Measuring this key parameter is difficult or impossible with direct methods, such as thermocouples and infrared cameras, due to the small size of LEDs. Fortunately, junction temperature can be measured indirectly by using a relationship between the diode forward voltage (Vf) and junction …

A New Multiobjective Modeling In Distribution Center Location Problem, Mehdi Jafarian, Azizolah Jafari, Mehdi Sharif-Yazdi, Seyed Javad Hosseininejad

Mehdi Jafarian

As has been mentioned in the literature, distribution centers location problem (DCLP) is a multiobjective problem. Cost (or distance) minimization is the primary objective in this area. While significance of each relation between a distribution center (DC) and a customer/retailer is different, it has not been considered seriously. By adapting available facility and new facility concepts of the multifacility location problem with costumer/retailer and a DC respectively, a utility function as the second objective based on the importance has been used. These importances are in decision maker (DM) s’ mind which should be quantified to be of use for modeling …

Rubric For Project Self-Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow each member of a project team to offer a self-assessment of their own performance on the projects. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Project Report Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to formalize the evaluation or assessment of a project report. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Presentation Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow classmates and myself to offer an evaluation or assessment of a student classroom presentation. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Ruberic For Project Team Member Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow team members for course projects to offer an evaluation or assessment of the fellow members of their team. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.