Industrial Technology Commons^™

Airport Security Investment Model, Joshua Daniel Bolton

Graduate Theses and Dissertations

In an increasingly mobile and diverse world, it is difficult to quantify the risk, or danger, associated with traveling. Airports have suffered greatly for being unable to define potential risks and protect against them. Intelligent adversary risk is a complicated high-level issue for many airports. Airports are targeted because of the large amount of people in a confined space and the social, economic, and psychological impact of terrorist attacks on the American people. In the months following September 11th, 2001, the airline industry in the United States lost $1.1 billion in revenue. The American people stayed grounded, for fear of …

Strain Path Effect On Austenite Transformation And Ductility In Q&P 1180 Steel, Jeffrey Grant Cramer

Theses and Dissertations

The ductility of Q&P 1180 steel was studied with regard to retained austenite transformation under different strain paths. Specimens were tested in uniaxial tension in a standard test frame as well as in situ in the scanning electron microscope (SEM). Then digital image correlation (DIC) was used to compute the effective strain at the level of the individual phases in the microstructure. Stretching experiments were also performed using limiting dome height (LDH) tooling, where specimens were strained in both biaxial and plane strain tension. The experiments were done incrementally, for each strain path, and the retained austenite at each level …

Quantitative Analysis Of Regenerative Energy In Electric Rail Traction Systems, Mahmoud Saleh, Oindrilla Dutta, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper aims at determining the influential factors affecting regenerative braking energy in DC rail transit systems. This has been achieved by quantitatively evaluating the dependence of regenerative energy on various parameters, such as vehicle dynamics, train scheduling, ground inclination and efficiency of the electrical devices. The recuperated power and energy have been presented by a mathematical model, comprising of a set of empirical forms, which allows for thorough analysis. A detailed simulation model of a typical DC-traction system has been developed to validate the developed empirical forms. The results verified the validity of the proposed mathematical model, and demonstrated …

Surface Topography Formation And Thermographic Analysis In Laser Polishing Of H13 Tool Steel, Joshua D. Miller

Electronic Thesis and Dissertation Repository

Laser polishing, in its simplest form, is the melting of a small layer of material via laser radiation. This creates a small molten pool which is re-distrusted across the surface, resulting in a much smoother finished surface. Although this process has been around for decades now, there has been a recent insurgence into industrial applications. Despite this, the phenomena that occur during the process are still not fully understood. Therefore, increasing the knowledge surrounding the process would be ideal.

To accomplish this, various input parameters of the process are altered to analyze the effect on the finished polished surface. Through …

Effect Of Fused Filament Fabrication Process Parameters On The Mechanical Properties Of Carbon Fiber Reinforced Polymers, Abdulrahman S. Alwabel

Theses and Dissertations

Carbon fiber reinforced polymer manufactured using additive manufacturing process is relatively a new process. The ability to predict the mechanical properties of these parts with high confidence will spread the use of these high-strength materials in more applications. The purpose of this research was to determine the effect of the build time between successive layers, arrangement of fiber and nylon layers, fiber start location, and the use of support material on the mechanical properties CFRP produced by additive manufacturing process using the MarkForged (MarkOne) 3D printer. A design of experiment (DOE) we preformed to develop a mathematical model describing the …

Sustainability Analysis For New Technologies Of Biofuels And Additive Manufacturing, Nelson A. Granda Marulanda

Doctoral Dissertations

This work is a compendium of different sustainability analysis on new technologies. The first chapter performed a Life Cycle Analysis of a biofuel process where pine woodchips are used to create SynGas. The study was done using a 10 tons gasifier, the mass balance of the reaction and an input/output analysis. All the data obtained was input into a freeware LCA software and the results were compared to the use of regular produced natural gas. The second chapter creates a benchmark of energy intensity and presents a case using binder jetting technology. Different Additive Manufacturing technologies energy intensity was reported, …

Simulation Modeling Approach For Evaluating A Solution Designed To Alleviate The Congestion Of Passenger Flow At The Composure Area Of Security Checkpoints, Maria Luisa Janer Rubio

Graduate Theses and Dissertations

In a previous study, we found that replacing the exit roller of a security checkpoint lane for a continuously circulating conveyor could potentially increase the throughput of passengers by over 28% while maintaining the TSA security-waiting time limit (Janer and Rossetti 2016). This study intends to expand this previous effort by investigating the impact of this circulating conveyor on the secondary screening related processes. Leone and Liu (2011) found that imposing a limit on the x-ray screening time, and diverting any item exceeding this limit to secondary screening, could decrease the waiting time by 43%. Our objective is to verify …

Continuous Permeability Measurement During Unidirectional Vacuum Infusion Processing, David Wayne Hoagland

Theses and Dissertations

Composite materials have traditionally been used in high-end aerospace parts and low-end consumer parts. The reason for this separation in markets is the wide gap in technology between pre-preg materials processed in an autoclave and chop strand fiberglass blown into an open mold. Liquid composite molding has emerged as a bridge between inexpensive tooling and large, technical parts. Processes such as vacuum infusion have made it possible to utilize complex layups of reinforcement materials in an open mold style set-up, creating optimal conditions for composites to penetrate many new markets with rapid innovation. Flow simulation for liquid composite molding is …

Pedagogical Resources For Industrial Control Systems Security: Design, Implementation, Conveyance, And Evaluation, Guillermo A. Francia Iii, Greg Randall, Jay Snellen

Journal of Cybersecurity Education, Research and Practice

Industrial Control Systems (ICS), which are pervasive in our nation’s critical infrastructures, are becoming increasingly at risk and vulnerable to internal and external threats. It is imperative that the future workforce be educated and trained on the security of such systems. However, it is equally important that careful and deliberate considerations must be exercised in designing and implementing the educational and training activities that pertain to ICS. To that end, we designed and implemented pedagogical materials and tools to facilitate the teaching and learning processes in the area of ICS security. In this paper, we describe those resources, the professional …

In Situ Characterization Of Voids During Liquid Composite Molding, Brock Don Zobell

Theses and Dissertations

Global competition is pushing the composites industry to advance and become more cost effective. Liquid Composite Molding or LCM is a family of processes that has shown significant promise in its potential to reduce process times and cost while maintaining high levels of part quality. However, the majority of research and information on composite processes have been related to prepreg-autoclave processing which is significantly different than LCM. In order for LCM processes to gain large scale implementation, significant research is required in order to model and simulate the unique nature of the resin infusion process. The purpose of this research …

Developing A Greenometer For Green Manufacturing Assessment, Ahmed H. Salem, Ahmed M. Deif

Industrial Technology and Packaging

In this paper a toolbox (Greenometer) to assess the greenness level of manufacturing companies is proposed. The assessment approach is based on capturing the relative greenness position of any company among other industries from different sectors as well as within the same sector. The assessment was based on selected greenness attributes and their composing indicators at each of the two levels of the developed Greenometer. Geometric Mean Method (GMM) was adopted to be the generic assessment technique for cross industries greenness evaluation, while Data Envelopment Analysis (DEA) was employed to assess the greenness level of intra-industries layer. Three different industrial …

Multi-Plc Exercise Environments For Training Ics First Responders, Joseph K. Daoud

Theses and Dissertations

When systems are targeted by cyber attacks, cyber first responders must be able to react effectively, especially when dealing with critical infrastructure. Training for cyber first responders is lacking and most existing exercise platforms are expensive, inaccessible or ineffective. This paper presents a mobile training platform which incorporates a variety of programmable logic controllers into a single system which facilitates the development of the unique skills required of cyber first responders operating in the realm of industrial control systems. The platform is modeled after a jail in the northeastern United States and was developed to maximize realism. Example training scenarios …

Advances In Composite Manufacturing Of Helicopter Parts, Tobias A. Weber, Hans-Joachim K. Ruff-Stahl

International Journal of Aviation, Aeronautics, and Aerospace

This study investigates and compares different methods for improving standard autoclave composite manufacturing in order to find suitable approaches to a more efficient composite production. The goal is not only a reduction in manufacturing times and costs but also quality enhancement. Improved part quality while decreasing costs enables a manufacturer of composite parts to expand its market share, especially in the helicopter market, which has been constantly shrinking over the last two years. Various approaches such as improved tooling technology, the use of automated systems for lamination as well as outsourcing are examined to provide an overview of possible advancements …

Effect Of Liquid Contamination On Hermeticity And Seal Strength Of Flexible Pouches With Lldpe, Francesca Delle Cese, Koushik Saha, S. Roy, Jay Singh

Journal of Applied Packaging Research

Flexible packaging is a growing successful market and the majority of flexible package applications are for the food industry. The demand for process optimization and reduced production costs, has led to an increase in flexible packaging. However, fast production lines can result in contamination in the seal area. For flexible food packaging, contamination is considered any food particle or substance trapped in the seal area. Current quality control processes can detect contamination in the seal area, but it is not determined if seal contamination affects seal quality. Oil-based and sodium based snack foods are two common categories that can be …

Condition Assessment Of End-Of-Use Products For Remanufacturing, Jovan Morgan

Research Opportunities for Engineering Undergraduates (ROEU) Program 2016-17

The goal of the project is to use the automated 3-D laser scanner using a Capnut as a test object to detect surface defects, corrosion and calculation error through offline quality inspection. potentially reducing labor time and cost for both consumers and manufacturers.

Insights On Lean Gamifications For Higher Education, Ahmed Deif

Industrial Technology and Packaging

Purpose

There is no argument that using games (gamification) is an efficient way of learning in higher education. The questions, though, are which gamification approach is most suitable at that level and how to assess its suitability? This paper aims to attempt to partially answer these two questions, in the context of lean thinking education.

Design/methodology/approach

The paper offers an assessment criteria to investigate the impact of lean gamification based on the evaluation of motivational, cognitive and social processing during games. In addition, a study is conducted among selected games using these assessment criteria. The study included statistical as well …

Evaluation Of Career Readiness At An Industrial Technology Program Using A Fuzzy Approach, Ahmed Deif, Cameron Stark, Kathryn Butler, Eric Olsen

Industrial Technology and Packaging

In this research, a quantitative model to measure the “career readiness” performance level of the current curriculum of the Industrial Technology and Packaging program at California Polytechnic State University is proposed. Career readiness is first defined through performance attributes and these attributes are further classified into specific categories and metrics. Using a fuzzy logic computational approach, “career readiness” measures are developed and a “career readiness” score referred to as (CRS) is calculated. The model is designed to be flexible, dynamic and easy to use. It should enable a systematic measurement of career readiness by producing a final integrated unit-less score. …

Chocolate Bar Wrapping Machine, Austin M. Hoff, Daniel R. Trepke, Caleb B. Krichbuam

Williams Honors College, Honors Research Projects

Gilbert Chocolates has proposed to manufacture a machine to wrap chocolate bars. This machine is intended to replace two people wrapping the chocolate bars by hand, which is a time consuming method. This is especially apparent between October and January when the workers are working long hours in preparation for the Christmas rush of customers. Currently wrapping a bar takes about a minute and Gilbert Chocolates wants this time reduced down to 20-30 seconds. The budget for this project is set at $1000, and is being funded by the company. This machine needs to fit in a cubic foot of …

Irresistible Bargains: Navigating The Surveillance Society, Robert M. Pallitto

Robert M Pallitto