Open Access. Powered by Scholars. Published by Universities.®

Operations Research, Systems Engineering and Industrial Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 12 of 12

Full-Text Articles in Operations Research, Systems Engineering and Industrial Engineering

Identifying Key Factors Associated With High Risk Asthma Patients To Reduce The Cost Of Health Resources Utilization, Amani Ahmad Oct 2018

Identifying Key Factors Associated With High Risk Asthma Patients To Reduce The Cost Of Health Resources Utilization, Amani Ahmad

LSU Master's Theses

Asthma is associated with frequent use of primary health services and places a burden on the United States economy. Identifying key factors associated with increased cost of asthma is an essential step to improve practices of asthma management.

The aim of this study was to identify factors associated with over utilization of primary health services and increased cost via claims data and to explore the effectiveness of case management program in reducing overall asthma related cost.

Claims data analysis for Medicaid insured asthma patients in Louisiana was conducted. Asthma patients were identified using their ICD-9 and ICD-10 codes, forward variable ...


Solar Irradiance Forecasting Using Deep Neural Networks, Ahmad Alzahrani, Pourya Shamsi, Cihan H. Dagli, Mehdi Ferdowsi Nov 2017

Solar Irradiance Forecasting Using Deep Neural Networks, Ahmad Alzahrani, Pourya Shamsi, Cihan H. Dagli, Mehdi Ferdowsi

Electrical and Computer Engineering Faculty Research & Creative Works

Predicting solar irradiance has been an important topic in renewable energy generation. Prediction improves the planning and operation of photovoltaic systems and yields many economic advantages for electric utilities. The irradiance can be predicted using statistical methods such as artificial neural networks (ANN), support vector machines (SVM), or autoregressive moving average (ARMA). However, they either lack accuracy because they cannot capture long-term dependency or cannot be used with big data because of the scalability. This paper presents a method to predict the solar irradiance using deep neural networks. Deep recurrent neural networks (DRNNs) add complexity to the model without specifying ...


Modeling And Simulation Of Microgrid, Ahmad Alzahrani, Mehdi Ferdowsi, Pourya Shamsi, Cihan H. Dagli Nov 2017

Modeling And Simulation Of Microgrid, Ahmad Alzahrani, Mehdi Ferdowsi, Pourya Shamsi, Cihan H. Dagli

Electrical and Computer Engineering Faculty Research & Creative Works

Complex computer systems and electric power grids share many properties of how they behave and how they are structured. A microgrid is a smaller electric grid that contains several homes, energy storage units, and distributed generators. The main idea behind microgrids is the ability to work even if the main grid is not supplying power. That is, the energy storage unit and distributed generation will supply power in that case, and if there is excess in power production from renewable energy sources, it will go to the energy storage unit. Therefore, the electric grid becomes decentralized in terms of control ...


Two Neural Network Based Decentralized Controller Designs For Large Scale Power Systems, Wenxin Liu, Jagannathan Sarangapani, Ganesh K. Venayagamoorthy, Donald C. Wunsch, Mariesa Crow, David A. Cartes Jan 2007

Two Neural Network Based Decentralized Controller Designs For Large Scale Power Systems, Wenxin Liu, Jagannathan Sarangapani, Ganesh K. Venayagamoorthy, Donald C. Wunsch, Mariesa Crow, David A. Cartes

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents two neural network (NN) based decentralized controller designs for large scale power systems' generators, one is for the excitation control and the other is for the steam valve control. Though the control signals are calculated using local signals only, the transient and overall system stabilities can be guaranteed. NNs are used to approximate the unknown and/or imprecise dynamics of the local power system and the interconnection terms, thus the requirements for exact system parameters are released. Simulation studies with a three machine power system demonstrate the effectiveness of the proposed controller designs.


Adaptive Critic Neural Network Force Controller For Atomic Force Microscope-Based Nanomanipulation, Qinmin Yang, Jagannathan Sarangapani Oct 2006

Adaptive Critic Neural Network Force Controller For Atomic Force Microscope-Based Nanomanipulation, Qinmin Yang, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

Automating the task of nanomanipulation is extremely important since it is tedious for humans. This paper proposes an atomic force microscope (AFM) based force controller to push nano particles on the substrates. A block phase correlation-based algorithm is embedded into the controller for the compensation of the thermal drift which is considered as the main external uncertainty during nanomanipulation. Then, the interactive forces and dynamics between the tip and the particle, particle and the substrate are modeled and analyzed. Further, an adaptive critic NN controller based on adaptive dynamic programming algorithm is designed and the task of pushing nano particles ...


Neural Network Based Decentralized Excitation Control Of Large Scale Power Systems, Wenxin Liu, Ganesh K. Venayagamoorthy, Donald C. Wunsch, David A. Cartes, Jagannathan Sarangapani Jul 2006

Neural Network Based Decentralized Excitation Control Of Large Scale Power Systems, Wenxin Liu, Ganesh K. Venayagamoorthy, Donald C. Wunsch, David A. Cartes, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a neural network (NN) based decentralized excitation controller design for large scale power systems. The proposed controller design considers not only the dynamics of generators but also the algebraic constraints of the power flow equations. The control signals are calculated using only local signals. The transient stability and the coordination of the subsystem controllers can be guaranteed. NNs are used to approximate the unknown/imprecise dynamics of the local power system and the interconnections. All signals in the closed loop system are guaranteed to be uniformly ultimately bounded (UUB). Simulation results with a 3-machine power system demonstrate ...


Forecasting Series-Based Stock Price Data Using Direct Reinforcement Learning, H. Li, Cihan H. Dagli, David Lee Enke Jan 2004

Forecasting Series-Based Stock Price Data Using Direct Reinforcement Learning, H. Li, Cihan H. Dagli, David Lee Enke

Engineering Management and Systems Engineering Faculty Research & Creative Works

A significant amount of work has been done in the area of price series forecasting using soft computing techniques, most of which are based upon supervised learning. Unfortunately, there has been evidence that such models suffer from fundamental drawbacks. Given that the short-term performance of the financial forecasting architecture can be immediately measured, it is possible to integrate reinforcement learning into such applications. In this paper, we present the novel hybrid view for a financial series and critic adaptation stock price forecasting architecture using direct reinforcement. A new utility function called policies-matching ratio is also proposed. The need for the ...


Decentralized Neural Network Control Of A Class Of Large-Scale Systems With Unknown Interconnection, Wenxin Liu, Jagannathan Sarangapani, Donald C. Wunsch, Mariesa Crow Jan 2004

Decentralized Neural Network Control Of A Class Of Large-Scale Systems With Unknown Interconnection, Wenxin Liu, Jagannathan Sarangapani, Donald C. Wunsch, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

A novel decentralized neural network (DNN) controller is proposed for a class of large-scale nonlinear systems with unknown interconnections. The objective is to design a DNN for a class of large-scale systems which do not satisfy the matching condition requirement. The NNs are used to approximate the unknown subsystem dynamics and the interconnections. The DNN is designed using the back stepping methodology with only local signals for feedback. All of the signals in the closed loop (system states and weights estimation errors) are guaranteed to be uniformly ultimately bounded and eventually converge to a compact set.


Moving Object Recognition And Guidance Of Robots Using Neural Networks, Abhijit Neogy, S. N. Balakrishnan, Cihan H. Dagli Jan 1992

Moving Object Recognition And Guidance Of Robots Using Neural Networks, Abhijit Neogy, S. N. Balakrishnan, Cihan H. Dagli

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The design of a robust guidance system for a robot is discussed. The two major tasks for this guidance system are the online recognition of a moving object invariant to rotation and translation, and tracking the moving object using a neural-network-driven vision system. This system included computer software ported to the IBM PC and interfaced with an IBM 7535 robot. The operation of this guidance system involved recognition of a moving object and the ability to track it till the robot and effector was in close proximity of the object. It was found that the robot was able to track ...


An Empirical Analysis Of Backpropagation Error Surface Initiation For Injection Molding Process Control, Alice E. Smith, Elaine R. Raterman, Cihan H. Dagli Jan 1991

An Empirical Analysis Of Backpropagation Error Surface Initiation For Injection Molding Process Control, Alice E. Smith, Elaine R. Raterman, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

Backpropagation neural networks are trained by adjusting initially random interconnecting weights according to the steepest local error surface gradient. The authors examine the practical implications of the arbitrary starting point on the error landscape of the ensuing trained network. The effects on network convergence and performance are tested empirically, varying parameters such as network size, training rate, transfer function and data representation. The data used are live process control data from an injection molding plant


Neural Networks In Manufacturing: Possible Impacts On Cutting Stock Problems, Cihan H. Dagli Jan 1990

Neural Networks In Manufacturing: Possible Impacts On Cutting Stock Problems, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

The potential of neural networks is examined, and the effect of parallel processing on the solution of the stock-cutting problem is assessed. The conceptual model proposed integrates a feature-recognition network and a simulated annealing approach. The model uses a neocognitron neural network paradigm to generate data for assessing the degree of match between two irregular patterns. The information generated through the feature recognition network is passed to an energy function, and the optimal configuration of patterns is computed using a simulated annealing algorithm. Basics of the approach are demonstrated with an example.


Possible Applications Of Neural Networks In Manufacturing, S. Lammers, Cihan H. Dagli Jan 1989

Possible Applications Of Neural Networks In Manufacturing, S. Lammers, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

Summary form only given. An examination is made of the potential of neural networks and the impact of parallel processing in the design and operations of manufacturing systems. After an initial discussion on possible areas of application, an approach that integrates artificial intelligence, operations research, and neural networks for the solution of a scheduling problem is examined