Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Biofuel Supply Chain Equilibrium Analysis With Subsidy Consideration, Amirsaman Hamzeh Bajgiran

Theses and Dissertations

Growing environmental concerns in the last few decades along with the energy security issues have led governments to take actions to reduce their dependence on fossil fuels and enhance renewable energy usage, including biofuels. Enforcement of federal or state mandates and regulations that obligate a certain amount of biofuel production are one of the main levers that governments use to achieve their goals. In the U.S. as an example, Renewable Fuel Standard (RFS) requires the production of 36 billion gallons of ethanol by 2022, 21 billion gallons of which should be advanced biofuels derived from biostocks other than corn starch. …

A Microscopic Simulation Laboratory For Evaluation Of Off-Street Parking Systems, Yun Yuan

Theses and Dissertations

The parking industry produces an enormous amount of data every day that, properly analyzed, will change the way the industry operates. The collected data form patterns that, in most cases, would allow parking operators and property owners to better understand how to maximize revenue and decrease operating expenses and support the decisions such as how to set specific parking policies (e.g. electrical charging only parking space) to achieve the sustainable and eco-friendly parking.

However, there lacks an intelligent tool to assess the layout design and operational performance of parking lots to reduce the externalities and increase the revenue. To address …

Global Renewable And Nonrenewable Energy Use Impact Assessment Of U.S. Manufacturing: An Integrated Cradle-To-Gate Lca And Dea Approach, Bahadir Ezici

Master's Theses

In this thesis, U.S. manufacturing industries` global supply chain-linked energy use and economic output are investigated considering a total of 16 renewable and nonrenewable energy carriers. A multiregion input output (MRIO) framework is employed to conduct the global supply chain-linked energy use impact assessment. The study period was between 1995 and 2014 based on data availability. Thus, 20 MRIO models were developed. Each MRIO model consists of the 40 largest economies of the world and the rest of the world (ROW) as the 41st country. Each country’s economy was structured into 35 manufacturing and service industries based on the Worth …

Discrete Event Simulation And Cost Model For Optimization Of Manufacturing Resource Usages Associated With Implementation Of A Redesigned Product, Alexander Eierle

Theses and Dissertations

This paper demonstrates an approach to evaluating production factors related to schedule and resources based on changes to the production process. A discrete event simulation model was developed to evaluate different production factors, such as arrival times, number of entities, resource availabilities, and work in process (WIP) times, compared to the total yield at a production facility. This model helped to develop relationships between the required asset resource usages and the overall production resource allocation with the related effects to process wait times and production outputs. A comparative analysis with cost was performed to determine the effect that varied resources …

Budget-Constrained Regression Model Selection Using Mixed Integer Nonlinear Programming, Jingying Zhang

Graduate Theses and Dissertations

Regression analysis fits predictive models to data on a response variable and corresponding values for a set of explanatory variables. Often data on the explanatory variables come at a cost from commercial databases, so the available budget may limit which ones are used in the final model.

In this dissertation, two budget-constrained regression models are proposed for continuous and categorical variables respectively using Mixed Integer Nonlinear Programming (MINLP) to choose the explanatory variables to be included in solutions. First, we propose a budget-constrained linear regression model for continuous response variables. Properties such as solvability and global optimality of the proposed …

Classifying Interdependencies In The Food And Agriculture Critical Infrastructure Sector, John Doerpinghaus

Graduate Theses and Dissertations

This work classifies examples of infrastructure interdependencies found in the food and agriculture critical infrastructure sector. Interdependencies are identified through an examination of rice and poultry agriculture throughout the state of Arkansas. The subtleties of interdependence examples in the food and agriculture sector are inadequately captured by the well-studied interdependence classification taxonomies. Through 39 interviews, we develop an understanding of the subtle temporal, geographic, and productivity scales of interdependence in over 100 examples and present five new, distinct classifications of interdependence: (1) dynamic physical, (2) dynamic geographic, (3) deadline, (4) delay, and (5) human, economic, and natural resource interdependencies. An …

Midpoint And Endpoint Sustainability Assessment Of U.S. And China Manufacturing: A Comparative Mrio+Recipe Analysis, Mustafa Saber

Master's Theses

Manufacturing is among the most important industries for an economy, which creates value-added, fosters innovation, stimulates employment and economic growth. Therefore, manufacturing industries are crucial for a country’s sustainable development not only for economic reasons but also for social (.e.g. employment, tax, etc.) and environmental ones. Thus, manufacturing activities’ contribution to the economy is critically related with environmental and social impacts. Sustainable economic growth is essential and necessary for a country to provide all necessary goods and services to its growing population.

And, this is highly linke with the creation of new jobs and in this context, manufacturing jobs have …

System Engineering Analysis Of Terraforming Mars With An Emphasis On Resource Importation Technology, Brandon Wong

LMU/LLS Theses and Dissertations

This project uses System Engineering principles to delve into the viability of different methods for Terraforming Mars, with a comparison between Paraterraforming, Terraforming and Bioforming. It will then examine one subsystem that will be integral to the terraforming process, which is the space infrastructure necessary to import enough gases to recreate Earth’s atmosphere on Mars. It will analyze the viability of Chemical Rockets, Nuclear Rockets, Space Elevators, Skyhooks, Rotovators, Mass Drivers, Launch Loops and Orbital Rings for this subsystem and provide recommendations for an implementation plan.

Real-Time Heuristics And Metaheuristics For Static And Dynamic Weapon Target Assignments, Alexander G. Kline

Theses and Dissertations

The problem of targeting and engaging individual missiles (targets) with an arsenal of interceptors (weapons) is known as the weapon target assignment problem. This problem has been well-researched since the seminal work in 1958. There are two distinct categories of the weapon target assignment problem: static and dynamic. The static weapon target assignment problem considers a single instance in which a known number of incoming missiles is to be engaged with a finite number of interceptors. By contrast, the dynamic weapon target assignment problem considers either follow on engagement(s) should the first engagement(s) fail, a subsequent salvo of incoming missiles, …

Heuristic Algorithm To Minimize Total Weighted Tardiness On The Unrelated Parallel Machine With Sequence Dependent Setup And Future Ready Time, Tzu Yi Li

Theses and Dissertations

This study presents a heuristic algorithm to minimize total weighted tardiness on unrelated parallel machines with sequence-dependent setup time and future ready time. We propose a new rule based on Apparent Tardiness Cost (ATC). The performance of the rule is evaluated on unrelated parallel machines. In order to solve a problem, we use a look-ahead method and a job-swap method. When a machine becomes idle, the heuristic compares the jobs on the machine and selects the one with the smallest total tardiness value to carry out a process.

The propose heuristic is divided into three stages: The first stage employs …

In Silico Analysis Of Advanced Processing Methods For Light-Weight Alloys Powders, Marjan Nezafati

Theses and Dissertations

Light-weight Al and Mg-based metal-matrix nanocomposites (MMNCs) are lauded as one of the most promising structural materials for vehicle, military, and construction applications. These MMNCs are often synthesized using the powder metallurgy (PM) process under liquid nitrogen cryogenic environments to control the grain sizes. It is believed that proper incorporation of the nitrogen species into the bulk lattice during processing could strongly enhance the mechanical properties of MMNCs by forming N-rich dispersoids. In this work, using the density-functional theory (DFT), the adsorption, absorption and diffusion behavior of nitrogen molecule/atoms have been studied and related to t Al and Mg MMNC …

Characterizing Interfacial Bonds In Hybrid Metal Am Structures, John Ross Linn

Theses and Dissertations

The capabilities of various metal Additive Manufacturing (AM) processes, such as Powder Bed Fusion – Laser (PBF-L) and Direct Energy Deposition (DED) are increasing such that it is becoming ever more common to use them in industrial applications. The ability to print atop a substrate broadens that scope of applications. There is ongoing research regarding the mechanical properties of additively processed materials, but little regarding the interaction between additive material and its substrate. An understanding of the mechanical and performance properties of the AM/substrate interface is imperative. This paper describes a study of the strength properties of AM/substrate interfaces, with …

Statistical Monitoring Of Queuing Networks, Yaren Bilge Kaya

USF Tampa Graduate Theses and Dissertations

Queuing systems are important parts of our daily lives and to keep their operations at an efficient level they need to be monitored by using queuing Performance Metrics, such as average queue lengths and average waiting times. On the other hand queue lengths and waiting times are generally random variables and their distributions depend on different properties like arrival rates, service times, number of servers. We focused on detecting the change in service rates in this report. Therefore, we monitored queues by using Cumulative Sum(CUSUM) charts based on likelihood ratios and compared the Average Run Length values of different service …

Evaluation And Validation Of Distraction Detection Algorithms On Multiple Data Sources, Shashank Mehrotra

Masters Theses

This study aims to evaluate algorithms designed to detect distracted driving. This includes the comparison of how efficiently they detect the state of distraction and likelihood of a crash. Four algorithms that utilize measures of cumulative glance, past glance behavior, and glance eccentricity were used to understand the distracted state of the driver and were validated on two separate data sources (i.e., simulator and naturalistic data). Additionally, an independent method for distraction detection was designed using data mining methods. This approach utilized measures like steering degree, lane offset, lateral and longitudinal velocity, and acceleration. The results showed a higher likelihood …

Identifying Key Factors Associated With High Risk Asthma Patients To Reduce The Cost Of Health Resources Utilization, Amani Ahmad

LSU Master's Theses

Asthma is associated with frequent use of primary health services and places a burden on the United States economy. Identifying key factors associated with increased cost of asthma is an essential step to improve practices of asthma management.

The aim of this study was to identify factors associated with over utilization of primary health services and increased cost via claims data and to explore the effectiveness of case management program in reducing overall asthma related cost.

Claims data analysis for Medicaid insured asthma patients in Louisiana was conducted. Asthma patients were identified using their ICD-9 and ICD-10 codes, forward variable …

Network Design For In-Motion Wireless Charging Of Electric Vehicles: Models And Algorithms, Mamdouh Mubarak

Operations Research and Engineering Management Theses and Dissertations

The aim of this research is to study the optimal deployment of wireless charging stations (WCS) in urban transportation networks. It is widely acknowledged that the relatively short driving range of EV and the long battery charging times collectively lead to a phenomenon known as "range anxiety" of EV drivers. This phenomenon remains to be the major factor that hampers EV adoption. Thus, in this dissertation, we study a cost-effective deployment plan of WCSs that facilitates EV adoption by alleviating the two major causes of the “range anxiety” phenomenon.

In the first part of this dissertation, we propose a deployment …

Maximizing Financial Benefit Of Lean Six Sigma Projects Through Optimized Selection Criteria, Colin Wasiloff

Operations Research and Engineering Management Theses and Dissertations

As evolving threats across the globe keep pace with increasing budget constraints, the US Army’s major subordinate commands and their sub-organizations are constantly challenged to do more with less. Resources such as human capital, information technology, facilities, and budgeted funding are stretched as thin as ever, while requirements to serve the Warfighter remain paramount. Each dollar of financial benefit gained through cost reduction efforts at the US Army can affect the Warfighter directly. Budgeted money saved or avoided is reprogrammed both locally and atop the hierarchy at the Department of Treasury to serve the Warfighter better.

Ordinal Logistic Regression was …

Satellite Constellation Architecture And Design To Take Advantage Of On-Orbit Servicing And Repair, Douglas Sciortino

LMU/LLS Theses and Dissertations

Access to space is becoming less expensive, which is allowing smaller companies with big ideas, such as on-orbit servicing and repair, to enter into the space industry. On-orbit servicing and repair provides capabilities, such as towing, refueling, inspections, and physical repair, to add additional life to on-orbit satellites by resolving life-limiting issues. On-orbit servicing and repair is technically possible, but there is still one major issue that continues to stifle the on-orbit servicing and repair market -- “satellites are not built with servicing in mind” (Parker, 2015).

The on-orbit servicing and repair industry is stagnate due to a challenging conundrum. …

Operational Squadron Scheduling, Khaled A. Almannaei

Theses and Dissertations

The 28th Operational Weather Squadron (28th OWS) is responsible for producing and disseminating mission planning and execution weather analyses and forecasts. The squadron must prepare schedules that meet the needs of their mission while dealing with real-world constraints such as time windows, task priorities, and intermittent recurring missions. The 28th OWS's manning consists of active duty, deployed in-place, reserve, civilian and contract personnel. In this research, a scheduling model and algorithm are provided as an approach to crew scheduling for the 28th Operational Weather Squadron. Scheduling in the 28th OWS is complex and can be time consuming. This model will …

Generating Strong Diversity Of Opinions: Agent Models Of Continuous Opinion Dynamics, Christopher W. Weimer

Theses and Dissertations

Opinion dynamics is the study of how opinions in a group of individuals change over time. A goal of opinion dynamics modelers has long been to find a social science-based model that generates strong diversity -- smooth, stable, possibly multi-modal distributions of opinions. This research lays the foundations for and develops such a model. First, a taxonomy is developed to precisely describe agent schedules in an opinion dynamics model. The importance of scheduling is shown with applications to generalized forms of two models. Next, the meta-contrast influence field (MIF) model is defined. It is rooted in self-categorization theory and improves …

Methods To Support The Project Selection Problem With Non-Linear Portfolio Objectives, Time Sensitive Objectives, Time Sensitive Resource Constraints, And Modeling Inadequacies, Neil C. Ranly

Theses and Dissertations

The United States Air Force relies upon information production activities to gain insight regarding uncertainties affecting important system configuration and in-mission task execution decisions. Constrained resources that prevent the fulfillment of every information production request, multiple information requestors holding different temporal-sensitive objectives, non-constant marginal value preferences, and information-product aging factors that affect the value-of-information complicate the management of these activities. This dissertation reviews project selection research related to these issues and presents novel methods to address these complications. Quantitative experimentation results demonstrate these methods’ significance.

The Military Inventory Routing Problem: Utilizing Heuristics Within A Least Squares Temporal Differences Algorithm To Solve A Multiclass Stochastic Inventory Routing Problem With Vehicle Loss, Ethan L. Salgado

Theses and Dissertations

Military commanders currently resupply forward operating bases (FOBs) from a central location within an area of operations mainly via convoy operations in a way that closely resembles vendor managed inventory practices. Commanders must decide when and how much inventory to distribute throughout their area of operations while minimizing soldier risk. Technology currently exists that makes utilizing unmanned cargo aerial vehicles (CUAVs) for resupply an attractive alternative due to the dangers of utilizing convoy operations. Enemy actions in wartime environments pose a significant risk to a CUAV's ability to safely deliver supplies to a FOB. We develop a Markov decision process …

Multi-Level Multi-Objective Programming And Optimization For Integrated Air Defense System Disruption, Aaron M. Lessin

Theses and Dissertations

The U.S. military's ability to project military force is being challenged. This research develops and demonstrates the application of three respective sensor location, relocation, and network intrusion models to provide the mathematical basis for the strategic engagement of emerging technologically advanced, highly-mobile, Integrated Air Defense Systems. First, we propose a bilevel mathematical programming model for locating a heterogeneous set of sensors to maximize the minimum exposure of an intruder's penetration path through a defended region. Next, we formulate a multi-objective, bilevel optimization model to relocate surviving sensors to maximize an intruder's minimal expected exposure to traverse a defended border region, …

Identifying Criteria To Predict Army Rifle Marksmanship Proficiency, Katlin Makina Anglin

Doctoral Dissertations and Master's Theses

The United States Army requires each Soldier to develop marksmanship proficiency in an effort to achieve combat readiness. Soldiers currently develop marksmanship proficiency through Basic Rifle Marksmanship (BRM) training, but significant skill deficiencies are apparent at the end of training. These skill deficiencies remain throughout training because instructors rarely assess Soldiers objectively before the final qualification, reducing the opportunity for instructors to diagnose skill deficiencies until it is too late. Therefore, the goal of the current research is to identify individual differences and sensor-based performance measures for inclusion in a formative assessment during BRM training. The results of the current …

Optimization And Management Techniques For Geo-Distributed Sdn-Enabled Cloud Datacenters' Provisioning, Khaled M. Alhazmi

Electronic Thesis and Dissertation Repository

Cloud computing has become a business reality that impacts technology users around the world. It has become a cornerstone for emerging technologies and an enabler of future Internet services as it provides on-demand IT services delivery via geographically distributed data centers. At the core of cloud computing, virtualization technology has played a crucial role by allowing resource sharing, which in turn allows cloud service providers to offer computing services without discrepancies in platform compatibility.

At the same time, a trend has emerged in which enterprises are adopting a software-based network infrastructure with paradigms, such as software-defined networking, gaining further attention …

Analysis Of Shanghai Aviation Hub Logistics Competitiveness, Tuo Chen

World Maritime University Dissertations

No abstract provided.

The Effect Of Rest Period On Fatigue Using Electromyography During Manual Lifting, Nandakumar Prabhakar

LSU Master's Theses

Manual materials handing (MMH) is the main cause and concern for injuries in the working population which lead to musculoskeletal disorders (MSDs). MSDs significantly contribute to the cost of workers’ compensation and loss of productivity, thus impacting economy of the United States. MSDs are mainly caused due to over exertion and fatigue experienced by workers involved in manual materials handling. In addition to over-exertion and fatigue, lack of short and frequent rest intervals between tasks contributes to the risk of MSDs. The objective of this research was to study the effect of rest period on muscle fatigue using electromyography (EMG) …

Robust Engineering Of Dynamic Structures In Complex Networks, Walter Botongo Bomela

McKelvey School of Engineering Theses & Dissertations

Populations of nearly identical dynamical systems are ubiquitous in natural and engineered systems, in which each unit plays a crucial role in determining the functioning of the ensemble. Robust and optimal control of such large collections of dynamical units remains a grand challenge, especially, when these units interact and form a complex network. Motivated by compelling practical problems in power systems, neural engineering and quantum control, where individual units often have to work in tandem to achieve a desired dynamic behavior, e.g., maintaining synchronization of generators in a power grid or conveying information in a neuronal network; in this dissertation, …

Methods For Online Feature Selection For Classification Problems, Alaleh Razmjoo

Electronic Theses and Dissertations

Online learning is a growing branch of machine learning which allows all traditional data mining techniques to be applied on an online stream of data in real-time. In this dissertation, we present three efficient algorithms for feature ranking in online classification problems. Each of the methods are tailored to work well with different types of classification tasks and have different advantages. The reason for this variety of algorithms is that like other machine learning solutions, there is usually no algorithm which works well for all types of tasks. The first method, is an online sensitivity based feature ranking (SFR) which …

Modeling And Solution Approaches For Non-Traditional Network Flow Problems With Complicating Constraints, Negin Enayaty Ahangar

Graduate Theses and Dissertations

In this dissertation, we model three network-based optimization problems. Chapter 2 addresses the question of what the operation plan should be for interdependent infrastructure systems in resource-constrained environments so that they collectively operate at the highest level. We develop a network-based operation model of these systems that accounts for interdependencies among them. To solve this large-scale model, a solution approach is proposed that relatively quickly generates high-quality solutions to the problem.

Chapter 3 presents a routing model for a single train within a railyard with the objective of minimizing the total length traveled by train. The difference between this problem …