Operations Research, Systems Engineering and Industrial Engineering Commons^™

On Translating Technology Research Into Industrial Applications, Stephen T.C. Wong

Practical Social and Industrial Research Symposium

Using personal cases he previously experienced, Prof Wong will share with colleagues the influence of environments and market forces that drive the applied technology research into practice. The speech will be delivered in an informal, interactive format, rather than didactic.

An Investigation Of The Factors Contributing To Measurement Uncertaintly Using A Coordinate Measurement Machine, Jayson S. Minix

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science in Engineering & Technology Management by Jayson S. Minix on December 3, 2014.

Methane Production By A Packed-Bed Anaerobic Digester Fed Dairy Barn Flush Water, Sean Richard Thomson

Master's Theses

Packed-bed digesters are an alternative to covered lagoon digesters for methane production and anaerobic treatment of dilute wastewaters such as dairy barn flush water. The physical media of packed-beds retain biofilms, often allowing increased treatment rates. Previous studies have evaluated several types of media for digestion of dilute wastewaters, but cost and media fouling have setback commercial development. A major operational cost has been effluent recirculation pumping.

In the present effort, a novel approach to anaerobic digestion of flush dairy water was developed at pilot-scale: broken walnut shells were used as a low-cost packed-bed medium and effluent recirculation was replaced …

Magnetic Holding Of Synthetic Quartz For Precision Grinding, Saudin Basic

Theses and Dissertations

The objective of this research work is to investigate the practicality of magnetic workholding of non-magnetic synthetic quartz during high-speed grinding. This research work is sponsored by Quartzdyne and will be used as the starting point to applying single-piece rounding of its quartz. Hypotheses were created that would permit the authors to conclude that magnets are in fact worthwhile workholders for non-magnetic materials. Designs of Experiments were used to reject or fail to reject the null hypotheses. Experiments were carried out using a custom HAAS lathe, modified into a grinding center with an NSK live spindle, and neodymium-iron-boron magnets used …

The Cadet Training Program Versus The Student Certification Program: A Study Of It- Support Training Programs At Western Kentucky University, Michael Courtney Moore

Masters Theses & Specialist Projects

Technology is a critical component of modern-day success. Advancements in technology have improved communication between individuals and companies. Technological advancements have allowed students to earn college degrees online. People who habitually use technology expect a high level of performance and support. As new technologies are implemented, such as complex web services or new operating systems, the dependence for information technology (IT) support grows in demand. Even learning curves can be cumbersome without proper assistance from IT professionals. Companies and institutions must accommodate user needs by implementing fast, efficient, and friendly support. In order to offer optimal customer support, representatives must …

Emergency Diesel-Electric Generator Set Maintenance And Test Periodicity, Stephen John Fehr

Engineering Management & Systems Engineering Theses & Dissertations

Manufacturer and industry recommendations vary considerably for maintenance and tests of emergency diesel-electric generator sets supporting critical operations power systems facilities. There is little consistency among sets of similar technology, and manufacturers and their representatives often provide contradictory guidance. As a result, periodicity of emergency diesel-electric generator set maintenance and tests varies considerably in practice. This work proposes and tests a research and analysis framework to develop parametric regression survival models of modern diesel-electric generator sets in emergency standby duty as a function of maintenance periodicity, test periodicity, and other predictors. Within this framework, predictors are developed from common maintenance …

Cost Performance Dynamics In Lean Production Leveling, Ahmed Deif, Hoda Elmaraghy

Industrial Technology and Packaging

Balancing of production systems is one of the main lean manufacturing principles as it reduces in-process storage and related forms of waste. A dynamic systems approach is proposed to investigate challenges of implementing production leveling and associated costs. A lean cell producing at takt time is modeled using system dynamics. The model captures various lean tools influencing production leveling and their implications. Comparative cost analysis between various leveling implementation policies for stochastic demand with multiple products is conducted. Results showed that determining the most feasible leveling policy is highly dictated by both the cost and limitations of capacity scalability. In …

Toward Automating Web Protocol Configuration For A Programmable Logic Controller Emulator, Deanna R. Fink

Theses and Dissertations

Industrial Control Systems (ICS) remain vulnerable through attack vectors that exist within programmable logic controllers (PLC). PLC emulators used as honeypots can provide insight into these vulnerabilities. Honeypots can sometimes deter attackers from real devices and log activity. A variety of PLC emulators exist, but require manual figuration to change their PLC pro le. This limits their flexibility for deployment. An automated process for configuring PLC emulators can open the door for emulation of many types of PLCs. This study investigates the feasibility of creating such a process. The research creates an automated process for figuring the web protocols of …

Dynamic Modelling Of Impact Of Lean Policies On Production Levelling Feasibility, Hoda Elmaraghy, Ahmed Deif

Industrial Technology and Packaging

A dynamic systems approach is proposed to investigate challenges of implementing production leveling and associated costs. A model of a lean cell is developed using system dynamics. The model captures various lean tools influencing production leveling. Comparative cost analysis between various leveling implementation policies for stochastic demand with multiple products is conducted. Results showed that determining the most feasible leveling policy is highly dictated by both capacity scalability cost and limitations. The developed model and revealed insights can help lean practitioners to better decide on when and how to implement production leveling as well as determine production lots sizes.

Impact Of Dynamic Capacity Policies On Wip Level In Mix Leveling Lean Environment, Ahmed Deif, Hoda Elmaraghy

Industrial Technology and Packaging

Balancing demand's product variety in production planning is one aspect of variety management challenge. This phenomenon is described in lean systems as mix leveling. This paper approach product mix leveling problem from a dynamic perspective. A system dynamics model is developed to explore the dynamics associated with the WIP level performance at different mix leveling policies in a lean environment. The system captures different lean tools and policies. Results showed that the best WIP performance is sensitive to both the degree of lean tools implementation as well as the capacity scalability level of the system. The presented analysis showed that …

Dynamic Lean Assessment For Takt Time Implementation, Rehab M. Ali, Ahmed M. Deif

Industrial Technology and Packaging

Increasing volatility, global competitiveness, and sales crisis all force the manufacturers to commit to the journey of world-class manufacturing performance via adopting “lean systems” to enable economic success in difficult times. Among the journey to lean, one of the hardest steps is measuring the progress of lean polices implementation especially in this highly dynamic market. This paper presents a dynamic model to evaluate the degree of leanness in manufacturing firms. The model is based on system dynamics approach and presents a “leanness score” for the manufacturing system. In addition, it examines the dynamics associated with the application of “One-piece flow” …

An Integrated Approach To Assess Manufacturing Greeness Level, Ahmed H. Salen, Ahmed Deif

Industrial Technology and Packaging

This paper proposes an integrated approach for relative greenness level assessment in selected manufacturing industries at the system level. The approach builds on existing methodologies to develop a multi-layer tool box called “Greenometer” which focus on the strategic comparison for cross industries evaluation as well as tactical comparison for intra-industries. The assessment tool captures the fundamental evaluation parameters of green manufacturing namely; Environment, Energy, Resources and Economy. In addition, the Greenometer employs geometric mean method (GMM) for the strategic layer and data envelopment analysis (DEA) for the tactical layer and will be used for different selected manufacturing disciplines. The proposed …

A Review Of Parallel Operation Of Active Power Filters In The Distributed Generation System, Shafiuzzaman Khadem, Malabika Basu, Michael Conlon

Dr. Shafiuzzaman Khan Khadem

In this paper a technical review of parallel operation of Active Power Filter (APF) for harmonic power compensation in distributed generation (DG) network has been presented. Controlling methods and connection topologies with their pros and cons are described. Recent improvements in controlling and future trends for the application of APFs in distributed mode are also identified.

Design And Implementation Of Iso:9001 Standards At Sigma 6 Electronics, Inc., Robert Kirkpatrick, Dylan Geisen, Simon Schermerhorn

Industrial Technology and Packaging

ISO 9001 certification is a very long process that can take even the most dedicated team years to complete. For smaller companies such a process could be costly, confusing, and arduous. While many resources exist, it takes nearly the same amount of effort to tailor fit the examples as it does to create a whole new set.

The purpose of this senior project is to research examples and help fit them to a small manufacturing company, Sigma 6 Electronics, Inc. An interlinked, or combined, quality manual/procedures were chosen to aid Sigma 6 Electronics through making the documentation clear and perfectly …

A Comparative Analysis Of Spatial Visualization Ability And Drafting Models For Industrial And Technology Education Students, Petros Katsioloudis, Vukica Jovanović, Mildred Jones

Engineering Technology Faculty Publications

The article presents the comparative study on the drafting models and spatial visualization ability of industrial and technology education students in the U.S. It discusses how the study was conducted which examined the issue based on technical drawings and with regards to the impacts of model types. The results reportedly revealed three-dimensional models are effective for promoting learning, however more studies have to be conducted.