Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Model Based Fault Detection And Prognostic Scheme For Uncertain Nonlinear Discrete-Time Systems, Balaje T. Thumati, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

A new fault detection and prognostics (FDP) framework is introduced for uncertain nonlinear discrete time system by using a discrete-time nonlinear estimator which consists of an online approximator. A fault is detected by monitoring the deviation of the system output with that of the estimator output. Prior to the occurrence of the fault, this online approximator learns the system uncertainty. In the event of a fault, the online approximator learns both the system uncertainty and the fault dynamics. A stable parameter update law in discrete-time is developed to tune the parameters of the online approximator. This update law is also …

Neural Network Output Feedback Control Of A Quadrotor Uav, Jagannathan Sarangapani, Travis Alan Dierks

Electrical and Computer Engineering Faculty Research & Creative Works

A neural network (NN) based output feedback controller for a quadrotor unmanned aerial vehicle (UAV) is proposed. The NNs are utilized in the observer and for generating virtual and actual control inputs, respectively, where the NNs learn the nonlinear dynamics of the UAV online including uncertain nonlinear terms like aerodynamic friction and blade flapping. It is shown using Lyapunov theory that the position, orientation, and velocity tracking errors, the virtual control and observer estimation errors, and the NN weight estimation errors for each NN are all semi-globally uniformly ultimately bounded (SGUUB) in the presence of bounded disturbances and NN functional …

Neural-Network-Based State Feedback Control Of A Nonlinear Discrete-Time System In Nonstrict Feedback Form, Pingan He, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a suite of adaptive neural network (NN) controllers is designed to deliver a desired tracking performance for the control of an unknown, second-order, nonlinear discrete-time system expressed in nonstrict feedback form. In the first approach, two feedforward NNs are employed in the controller with tracking error as the feedback variable whereas in the adaptive critic NN architecture, three feedforward NNs are used. In the adaptive critic architecture, two action NNs produce virtual and actual control inputs, respectively, whereas the third critic NN approximates certain strategic utility function and its output is employed for tuning action NN weights …

Distributing Complementary Resources Across Multiple Periods With Stochastic Demand, Shih-Fen Cheng, John Tajan, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

In this paper, we evaluate whether the robustness of a market mechanism that allocates complementary resources could be improved through the aggregation of time periods in which resources are consumed. In particular, we study a multi-round combinatorial auction that is built on a general equilibrium framework. We adopt the general equilibrium framework and the particular combinatorial auction design from the literature, and we investigate the benefits and the limitation of time-period aggregation when demand-side uncertainties are introduced. By using simulation experiments, we show that under stochastic conditions the performance variation of the process decreases as the time frame length (time …

Leading Firms As Knowledge Gatekeepers In A Networked Environment, Deogratias Harorimana Mr

Dr Deogratias Harorimana

This chapter introduces the role of the knowledge gatekeeper as a mechanism by which knowledge is created and transferred in a networked environment. Knowledge creation and transfer are essential for building a knowledge based economy. The chapter considers obstacles that inhibit this process and argues that leading firms create a shared socio-cultural context that enables the condivision of tacit meanings and codification of knowledge. Leading firms act as gatekeepers of knowledge through the creation of shared virtual platforms. There will be a leading firm that connects several networks of clients and suppliers may not interact directly with one another, but …

A Model Based Fault Detection Scheme For Nonlinear Multivariable Discrete-Time Systems, Balaje T. Thumati, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a novel robust scheme is developed for detecting faults in nonlinear discrete time multi-input and multi-output systems in contrast with the available schemes that are developed in continuous-time. Both state and output faults are addressed by considering separate time profiles. The faults, which could be incipient or abrupt, are modeled using input and output signals of the system. By using nonlinear estimation techniques, the discrete-time system is monitored online. Once a fault is detected, its dynamics are characterized using an online approximator. A stable parameter update law is developed for the online approximator scheme in discrete-time. The …

Engineering Management Framework In Support Of Modeling & Simulation Application For Domain Specific Procurement, Thomas Guy Litwin

Engineering Management & Systems Engineering Theses & Dissertations

A strategic process is desirable for project-based organizations in order for them to be efficient and effective when developing Modeling & Simulation (M&S) systems. This thesis proposes an overarching process that combines traditional M&S and Engineering Management methodologies in a new framework to support M&S organizations during the procurement process.

This thesis proposes both a Strategic Project Management Process (SPMP) and a systems engineering process for M&S federation development projects. The systems engineering process utilizes the artifacts of Model Driven Architecture (MDA) to support building M&S federations driven by operational requirements. Detailed research of this systems engineering process revealed a …

Spreadsheet Data Resampling For Monte-Carlo Simulation, Thin Yin Leong, Wee Leong Lee

Research Collection School Of Computing and Information Systems

The pervasiveness of spreadsheets software resulted in its increased application as a simulation tool for business analysis. Random values generation supporting such evaluations using spreadsheets are simple and yet powerful. However, the typical approach to Monte-Carlo simulations, which is what simulations with stochasticity are called, requires significant amount of time to be spent on data collection, data collation, and distribution function fitting. In fact, the latter can be overwhelming for undergraduate students to learn and do properly in a short time. Resampling eliminates both the need to fit distributions to the sample data, and to perform the ensuing tests of …

Determining The Number Of Bp Neural Network Hidden Layer Units, Huayu Shen, Zhaoxia Wang, Chengyao Gao, Juan Qin, Fubin Yao, Wei Xu

Research Collection School Of Computing and Information Systems

This paper proposed an improved method to contrapose the problem which is difficult to determine the number of BP neural network hidden layer units. it is proved that the method is efficeient in reducing the frequency of the test through experients, and improves the efficiency of determining the best number of hidden units, which is more valuable in the applications.

Optimal Energy-Delay Routing Protocol With Trust Levels For Wireless Ad Hoc Networks, Eyad Taqieddin, Ann K. Miller, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents the Trust Level Routing (TLR) pro- tocol, an extension of the optimized energy-delay rout- ing (OEDR) protocol, focusing on the integrity, reliability and survivability of the wireless network. TLR is similar to OEDR in that they both are link state routing proto- cols that run in a proactive mode and adopt the concept of multi-point relay (MPR) nodes. However, TLR aims at incorporating trust levels into routing by frequently changing the MPR nodes as well as authenticating the source node and contents of control packets. TLR calcu- lates the link costs based on a composite metric (delay …

A Confidence Paradigm For Classification Systems, Nathan J. Leap

Theses and Dissertations

There is no universally accepted methodology to determine how much confidence one should have in a classifier output. This research proposes a framework to determine the level of confidence in an indication from a classifier system where the output is or can be transformed into a posterior probability estimate. This is a theoretical framework that attempts to unite the viewpoints of the classification system developer (or engineer) and the classification system user (or war-fighter). The paradigm is based on the assumptions that the system confidence acts like, or can be modeled as a value and that indication confidence can be …

Generating Robust Schedules Subject To Resource And Duration Uncertainties, Na Fu, Hoong Chuin Lau, Fei Xiao

Research Collection School Of Computing and Information Systems

We consider the Resource-Constrained Project Scheduling Problem with minimal and maximal time lags under resource and duration uncertainties. To manage resource uncertainties, we build upon the work of Lambrechts et al 2007 and develop a method to analyze the effect of resource breakdowns on activity durations. We then extend the robust local search framework of Lau et al 2007 with additional considerations on the impact of unexpected resource breakdowns to the project makespan, so that partial order schedules (POS) can absorb both resource and duration uncertainties. Experiments show that our proposed model is capable of addressing the uncertainty of resources, …

A Heuristic Method For Job-Shop Scheduling With An Infinite Wait Buffer: From One-Machine To Multi-Machine Problems, Z. J. Zhao, J. Kim, M. Luo, Hoong Chuin Lau, S. S. Ge

Research Collection School Of Computing and Information Systems

Through empirical comparison of classical job shop problems (JSP) with multi-machine consideration, we find that the objective to minimize the sum of weighted tardiness has a better wait property compared with the objective to minimize the makespan. Further, we test the proposed Iterative Minimization Micro-model (IMM) heuristic method with the mixed integer programming (MIP) solution by CPLEX. For multi-machine problems, the IMM heuristic method is faster and achieves a better solution. Finally, for a large problem instance with 409 jobs and 30 types of machines, IMM-heuristic method is compared with ProModel and we find that the heuristic method is slightly …

The Dependence Of Measured Modulation Error Ratio On Phase Noise, Ron D. Katznelson

Ron D. Katznelson

This paper reviews the algorithms used by Vector Signal Analyzers to measure Modulation Error Ratio (MER) and derives the explicit functional dependence of measured MER on phase noise of digital transmitters. The modulation error model is introduced and the analytical expression for key estimated parameters required to obtain MER measure are derived. The essential elements of algorithms employed by MER measurement instruments to estimate amplitude scale, frequency offset, and initial phase intercept and the resulting MER are identified. The frequency response of the effective phase-noise rejection filtering action associated with a given measurement epoch is derived. It is shown that …

Modeling Of Fermentation Processes Using Online Kernel Learning Algorithm, Yi Liu

Dr. Yi Liu

No abstract provided.

Adaptive Control Of A Class Of Nonlinear Discrete-Time Systems With Online Kernel Learning, Yi Liu

Dr. Yi Liu

No abstract provided.

Damping Inter-Area Oscillations By Upfcs Based On Selected Global Measurements, Mahyar Zarghami, Yilu Liu, Jagannathan Sarangapani, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

This paper introduces a method of using a selected set of the global data for controlling inter-area oscillations of the power network using unified power flow controllers. This novel algorithm utilizes reduced order observers for estimating the missing data the purpose of control when all the data is unavailable through frequency measurements in a wide area control approach. The paper will also address the problem of time-delay in data acquisition through examples.

Linear Relaxation Techniques For Task Management In Uncertain Settings, Pradeep Varakantham, Stephen F. Smith

Research Collection School Of Computing and Information Systems

In this paper, we consider the problem of assisting a busy user in managing her workload of pending tasks. We assume that our user is typically oversubscribed, and is invariably juggling multiple concurrent streams of tasks (or work flows) of varying importance and urgency. There is uncertainty with respect to the duration of a pending task as well as the amount of follow-on work that may be generated as a result of executing the task. The user’s goal is to be as productive as possible; i.e., to execute tasks that realize the maximum cumulative payoff. This is achieved by enabling …

Biology-Inspired Approach For Communal Behavior In Massively Deployed Sensor Networks, Kennie H. Jones

Computer Science Theses & Dissertations

Research in wireless sensor networks has accelerated rapidly in recent years. The promise of ubiquitous control of the physical environment opens the way for new applications that will redefine the way we live and work. Due to the small size and low cost of sensor devices, visionaries promise smart systems enabled by deployment of massive numbers of sensors working in concert. To date, most of the research effort has concentrated on forming ad hoc networks under centralized control, which is not scalable to massive deployments. This thesis proposes an alternative approach based on models inspired by biological systems and reports …

Neural Network Models For Solving The Maximum Flow Problem, S. Effati, M. Ranjbar

Applications and Applied Mathematics: An International Journal (AAM)

In this paper, two new neural network models for solving the maximum flow problem are presented. The maximum flow problem in networks is formulated as a special type of linear programming problem and it is solved by appropriately defined neural networks. The nonlinear neural networks are able to generate optimal solution for maximum flow problem. We solve neural network models by one of the numerical method. Finally, some numerical examples are provided for the sake of illustration.

Electric Elves: What Went Wrong And Why, Milind Tambe, Emma Bowring, Jonathan Pearce, Pradeep Reddy Varakantham, Paul Scerri, David V. Pynadath

Research Collection School Of Computing and Information Systems

Software personal assistants continue to be a topic of significant research interest. This article outlines some of the important lessons learned from a successfully-deployed team of personal assistant agents (Electric Elves) in an office environment. In the Electric Elves project, a team of almost a dozen personal assistant agents were continually active for seven months. Each elf (agent) represented one person and assisted in daily activities in an actual office environment. This project led to several important observations about privacy, adjustable autonomy, and social norms in office environments. In addition to outlining some of the key lessons learned we outline …

Writing Research Proposal: Literature Review And Database Search, Mamoudou H. Dicko Prof.

Pr. Mamoudou H. DICKO, PhD

Missouri S&T Mote-Based Demonstration Of Energy Monitoring Solution For Network Enabled Manufacturing Using Wireless Sensor Networks (Wsn), James W. Fonda, Maciej Jan Zawodniok, Al Salour, Jagannathan Sarangapani, Donald Miller

Electrical and Computer Engineering Faculty Research & Creative Works

In this work, an inexpensive electric utilities monitoring solution using wireless sensor networks is demonstrated that can easily be installed, deployed, maintained and eliminate unnecessary energy costs and effort. The monitoring solution is designed to support network enabled manufacturing (NEM) program using Missouri University of Science and Technology (MST), formerly the University of Missouri-Rolla (UMR), motes.

Improving Mixed Variable Optimization Of Computational And Model Parameters Using Multiple Surrogate Functions, David Bethea

Theses and Dissertations

This research focuses on reducing computational time in parameter optimization by using multiple surrogates and subprocess CPU times without compromising the quality of the results. This is motivated by applications that have objective functions with expensive computational times at high fidelity solutions. Applying, matching, and tuning optimization techniques at an algorithm level can reduce the time spent on unprofitable computations for parameter optimization. The objective is to recover known parameters of a flow property reference image by comparing to a template image that comes from a computational fluid dynamics simulation, followed by a numerical image registration and comparison process. Mixed …

Output Feedback Controller For Operation Of Spark Ignition Engines At Lean Conditions Using Neural Networks, Jonathan B. Vance, Brian C. Kaul, Jagannathan Sarangapani, J. A. Drallmeier

Electrical and Computer Engineering Faculty Research & Creative Works

Spark ignition (SI) engines operating at very lean conditions demonstrate significant nonlinear behavior by exhibiting cycle-to-cycle bifurcation of heat release. Past literature suggests that operating an engine under such lean conditions can significantly reduce NO emissions by as much as 30% and improve fuel efficiency by as much as 5%-10%. At lean conditions, the heat release per engine cycle is not close to constant, as it is when these engines operate under stoichiometric conditions where the equivalence ratio is 1.0. A neural network controller employing output feedback has shown ability in simulation to reduce the nonlinear cyclic dispersion observed under …

A Suite Of Robust Controllers For The Manipulation Of Microscale Objects, Qinmin Yang, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

A suite of novel robust controllers is introduced for the pickup operation of microscale objects in a microelectromechanical system (MEMS). In MEMS, adhesive, surface tension, friction, and van der Waals forces are dominant. Moreover, these forces are typically unknown. The proposed robust controller overcomes the unknown contact dynamics and ensures its performance in the presence of actuator constraints by assuming that the upper bounds on these forces are known. On the other hand, for the robust adaptive critic-based neural network (NN) controller, the unknown dynamic forces are estimated online. It consists of an action NN for compensating the unknown system …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility Design, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The major objectives will lead to the creation of a framework that combines all the strengths of AMUSE’s complicated calculations, well-established commercial system process package, and ISOPro’s flexible parameter optimization modules. Development of the process simulation code can be done using the solvent extraction process at Argonne National Laboratory in collaboration with the research team from the Mechanical Engineering Department at UNLV.

Research accomplishments:

• Completed final version of the ISOPro User Manual associated with summarized ISOPro source codes.

• Redesigned and completed use case and design class diagrams (DCD) of the ISOPro package using ArgoUML.

• Improved ISOPro system …

How Do You Interpret A Confidence Interval?, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

A confidence interval (CI) is an interval estimate of a population parameter. Instead of estimating the parameter by a single value, a point estimate, an interval likely to cover the parameter is developed. Many student incorrectly interpret the meaning of a confidence interval. This paper offers a quick overview of how to correctly interpret a confidence interval.

Why Divide By (N-1) For Sample Standard Deviation?, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

In statistics, the sample standard deviation is a widely used measure of the variability or dispersion of a data set. The standard deviation of a data set is the square root of its variance. In calculating the sample standard deviation, the divisor is the number of samples in the data set minus one (n-1) rather than n. This often confuses students. This paper offers a quick overview of why the divisor is (n-1) for calculating the sample standard deviation.

From Automatic Identification And Data Capture (Aidc) To “Smart Business Process”: Preparing For A Pilot Integrating Rfid, S. F. Wamba, E. Lefebvre, Y. Bendavid, L.. A. Lefebvre

Faculty of Informatics - Papers (Archive)

This paper examines the underlying logic behind the rules configured in a RFID middleware to support “smart business processes” in one retail supply chain. Through a detailed investigation of the underlying business processes, we will demonstrate how businesses rules can be defined, configured and refined in a RFID middleware. The results confirm that RFID technology is not a “Plug and Play” solution. RFID middleware configuration will require a high level of customization. Finally, this study allows the improvement of our understanding of the real potential of RFID technology in the supply chain context.