Operations Research, Systems Engineering and Industrial Engineering Commons^™

Applying System Dynamics To Confront Complex Decision Making In R&D Systems, Arash Golnam, Nader Ale Ebrahim

Nader Ale Ebrahim

Research and development has always played a strategically important role in the survival and the growth of technology-based firms. R&D is positively linked to company performance measures such as sales, productivity and shareholder returns and in addition to this, facing increased competition, as a result of globalization the viability of many established firms is based on the efficiency of their R&D activities. Similar to other business models, R&D systems are characterized by complex structure and dynamic behavior. It's often difficult to predict or trace the consequences of certain decisions due to the existence of delays, non-linearities and causal feedback inherent …

Establishment Of A System Operating Characteristic For Autonomous Wide Area Search Vehicles, Brian A. Kish

Theses and Dissertations

The optimal employment of autonomous search and destroy vehicles is addressed. The results apply to air, land, or water vehicles with 1, k, or infinite warheads. The specific scenarios considered involve an air vehicle searching a battle space for stationary targets in the presence of false targets. Encounters are modeled with uniform, Poisson, and normal distributions. Linear and circular search patterns are examined. All relevant parameters are extracted from intelligence information, the sensor performance specification, and the air vehicle performance specification. Analytic system effectiveness measures are derived using applied probability theory. The effectiveness measures derived in this dissertation handle time-varying …

Categorizing High Energy Laser Effects For The Joint Munitions Effectiveness Manual, James A. Markham

Theses and Dissertations

With the high risk and cost in fielding High Energy Laser (HEL) weapon systems, the development process must include computer simulation models of weapon system performance from the engineering level up to predicting the military worth of employing specific systems in a combat scenario. This research effort focuses on defining how to measure lethality for HEL weapons in an Advanced Tactical Laser (ATL) scenario. In order to create an effective measure for direct comparison between the emerging laser weapon system and existing conventionally delivered weapons, lase time in seconds is presented as a measure comparable to rounds required to cause …

Output Analysis And Comparison Of Deployment Models With Varying Fidelity, Matthew M. Gill

Theses and Dissertations

This thesis explores the changes in insights that result from using different types of models to assess the capability of deploying the Stryker Brigade within specific timeline goals. The thesis uses as its primary base a study conducted in 2002 by USTRANSCOM to evaluate the ability of Stryker to meet stated deployment timeline goals. Specifically, the author compares the outputs from four different models as they change over three different deployment scenarios and 10 different routes. The study investigates the relationships among the outputs of spreadsheet models, spreadsheet models with elements of variability added, and low- and high-level discrete-event simulations. …

A Qualitative Study Of Industry And Air Force Commodity Council Processes, Robert J. Irvine

Theses and Dissertations

The purpose of this research was to compare industry and Air Force commodity council processes. More specifically, this research used a survey to gather strategic sourcing philosophies and procedures (with respect to small business participation in procurement strategies) from successful industry firms. Industry source selection documentation, applicable government contracting guidelines, and a literature review of strategic sourcing materials were also reviewed. The current Air Force commodity council process and associated historical documents were then studied using a business process modeling tool. It was determined that the Air Force process differs from industry in how small business participation is addressed, the …

Barriers To Electronic Records Management (Erm): An Exploratory Case Study Investigating Erm In The Deployed Environment During Operations Enduring Freedom And Iraqi Freedom, Brian G. Hobbs

Theses and Dissertations

Corporate and government organizations can use electronic records as an important strategic resource, if the records are managed properly. In addition to meeting legal requirements, electronic records can play a vital role in the management and operation of an organization's activities. Corporate America is facing challenges in managing electronic records, and so too is the U.S. Air Force (USAF). The deployed environment is particularly problematic for electronic records management (ERM). This research, thus, investigates ERM in the deployed environment to identify and characterize the barriers faced by USAF personnel who deployed to locations supporting Operations Enduring Freedom and Iraqi Freedom. …

Analysis Of Online-Delaunay Navigation For Time Sensitive Targeting, David Chow

Theses and Dissertations

Given the drawbacks of leaving time-sensitive targeting (TST) strictly to humans, there is value to the investigation of alternative approaches to TST operations that employ autonomous systems. This paper accomplishes five things. First, it proposes a short-hop abbreviated routing paradigm (SHARP) - based on Delaunay triangulations (DT), ad-hoc communication, and autonomous control - for recognizing and engaging TSTs that, in theory, will improve upon persistence, the volume of influence, autonomy, range, and situational awareness. Second, it analyzes the minimum timeframe need by a strike (weapons enabled) aircraft to navigate to the location of a TST under SHARP. Third, it shows …

Optimal Maintenance For Stochastically Degrading Satellite Constellations, Timothy J. Cook

Theses and Dissertations

This thesis develops a methodology to determine an optimal policy for maintaining a satellite constellation that degrades over time. Previous work has developed a methodology to compute an optimal replacement policy for a satellite constellation in which satellites were viewed as binary entities, either operational or failed. This research extends the previous models by developing an optimal maintenance policy for satellite constellations in which each satellite may operate in a finite number of degraded states. The constellation is assumed to consist of a finite number of satellites, each with a finite number of functions with distinct failure mechanisms. Assuming each …

An Approach For Optimizing The On-Orbit Servicing Architecture For The Space-Based Radar Constellation, Michael L. Mcconnell

Theses and Dissertations

Satellite systems, once operational, are essentially a consumable item with no capacity to maintain, repair, or upgrade them while on-orbit. In order to avoid having to replace costly space assets, the Defense Advanced Research Projects Agency (DARPA) and Air Force Space Command (AFSPC) are looking to developing programs to provide an on-orbit servicing capability for future satellite systems under development, such as the Space-Based Radar (SBR) system. DARPA and AFSPC are studying on-orbit servicing using the Orbital Express platform as part of an Analysis of Alternatives for the SBR program. Like their satellite clients, on-orbit servicing assets are expected to …

Passwords: A Survey On Usage And Policy, Kurt W. Martinson

Theses and Dissertations

Computer password use is on the rise. Passwords have become one of the primary authentication methods used today. It is because of their high use that organizations have started to place parameters on passwords. Are password restrictions a nuisance? What are some of the consequences that result as organizations place the burden of their computer security on passwords? This thesis analyzes the results of a survey instrument that was used to determine if individuals are using similar techniques or patterns when choosing or remembering their passwords. It also looks at how individuals feel about using passwords. In addition, the authors …

The Feasibility Of The U.S. Air Force Mandating The Exclusive Use And Purchase Of Forest Stewardship Council Certified Wood And Paper Containing 100% Post Consumer Content, Silinda Johnson

Theses and Dissertations

The Resource Conservation and Recovery Act required federal agencies to purchase products with the highest recovered content (or post-consumer content in the case of paper) as practicable. The Office of Federal Procurement Policy required all executive agencies to give preference in their procurement programs to products that conserve natural resources and protect the environment. These requirements necessitate that the Air Force consider purchasing 100% post-consumer content (PCC) paper and Forest Stewardship Council (FSC) certified wood because of their environmentally preferable attributes. This study compared the availability, performance standards, and prices of 100% PCC paper to 30% PCC paper and FSC-certified …

Minimizing Security Forces Response Times Through The Use Of Facility Location Methodologies, Michael C. Dawson

Theses and Dissertations

Since the events of September 11, 2001, security for the nation's Intercontinental Ballistic Missile force has become a prominent concern for personnel in the highest levels of government. This has resulted in many physical security upgrades and new methods to counter hostile activities. This research seeks to find the optimal placement for one layer of the security net protecting these crucial assets, the daily-deployed security forces Fire Teams. The problem of finding the optimal placement for these forces is modeled as a facility location problem. Three of the methods of locating facilities available in the literature are selected to solve …

Comparing Management Approaches For Automatic Test Systems: A Strategic Missile Case Study, William C. Ford

Theses and Dissertations

From 1980 to 1992, the DoD spent over $50 billion acquiring Automatic Test Systems (ATS) used to test weapon systems. At that time, procuring unique ATS to support single weapon systems was the norm. In 1994, the DoD made a dramatic change to their ATS acquisition policy; common ATS that supported multiple weapon systems was preferred over ATS tailored to support a single weapon system. Expected benefits of this new policy included: more reliable equipment, increased supportability, decreased cost, smaller logistics footprint, and decreased manning. To date, the common ATS initiative has garnered little support AF-wide due to lack of …

Air Force Jp-8 Fuel Distribution System: A Statistical Analysis To Determine Where And When To Sample, Eric J. Heath

Theses and Dissertations

The Air Force Petroleum Office at Wright-Patterson Air Force Base, Ohio collects JP-8 sampling data, but this data doesn't undergo analysis to determine the health of the base-level JP-8 fuel distribution system. Commanders possess no known confidence level when assessing base-level fuel health. Therefore, the objective of this research is to assess Air Force base-level fuel sampling data to determine the base-level sampling point that ensures a quality and healthy product at the aircraft. Also, this research seeks to identify how often correlation sampling should take place. Sample test pass rates are analyzed from three locations, receipt, storage, and vehicles/aircraft, …

Strategic Airlift En Route Analysis And Considerations To Support The Global War On Terrorism, Michael C. Sere

Theses and Dissertations

The Global War on Terrorism has mandated the need for additional global en route airfields. En route airfields consist of bases that are strategically located at intermediate locations between the Continental United States and the intended theater of operations. These airfields serve as refueling, crew staging, or maintenance stops for strategic airlift aircraft flying transoceanic routes. The focus of this study is to examine concepts to meet this need and to address important aspects that should be considered in devising new en route strategies. Based on various important factors associated with potential en route airfields, a goal programming methodology was …

Decision Analysis Using Value-Focused Thinking To Select Renewable Alternative Fuels, Eric A. Queddeng

Theses and Dissertations

The United States relies on imported oil as a result of domestic petroleum consumption rates greatly exceeding production rates. Alternative fuels are a major force in the effort to reduce petroleum consumption in the transportation industry. The transportation industry also accounts for 1/3 of all greenhouse gas emissions and nearly half of all cancers attributed to outdoor sources of pollutants. The purpose of this research was to evaluate the economic and environmental feasibility of renewable alternative fuels and associated blends (ethanol, methanol, 100% biodiesel (B100), 20% biodiesel (B20) and e-diesel) compared to non-renewable alternative fuels (compressed natural gas and propane) …

Performance Based Service Acquisition: A Quantitative Evaluation Of Implementation Goals And Performance In The United States Air Force, Dylan D. Pope

Theses and Dissertations

In an attempt to maximize cost savings in the rapidly growing services sector, the DoD established a Performance Based Service Acquisition (PBSA) strategy that focuses on evaluating contractor performance based on their ability to meet desired outcomes rather than the means to which the outcomes are obtained. In April 2000, Dr. Gansler, then Under Secretary of Defense for Acquisition, Technology and Logistics, mandated that 50 percent of all eligible service acquisitions be awarded using PBSA methods by FY 2005. Since then very little research has been focused on USAF implementation of PBSA and the progress and attainment of the PBSA …

Simulation In Semiconductor Manufacturing Facilities, Amr Arisha, Paul Young

Conference papers

Semiconductor manufacturing is one of the most complex industries in terms of technology and manufacturing procedure. The life cycle of a semiconductor facility (FAB) has many phases, in their life cycle including capacity planning, new products introduction, variation of products/technologies, and decline phase. The complexity of the manufacturing and the external forces from markets and technology growth make predicting the effects of changes in the manufacturing system problematic. Simulation, if used correctly, is a powerful hands-on tool which may be used to give a better insight of the effect of engineering/management decisions on the performance of the manufacturing system. While …

Development Of A Process Modelling System For Simulation, John Ryan

Other resources

This thesis details the development of a process modelling technique to aid a simulation model developer during the requirements gathering and conceptual modelling phases of a simulation project.

There are a number of process modelling techniques available that are capable of being used during such phases of a simulation project, however there is currently a lack of process modelling techniques developed specifically to aid a simulation model developer in capturing, representing and communicating information and systems issues to persons involved in the operation of discrete systems under investigation.

A detailed review of the literature related to techniques capable of supporting …

Using Multi-Stack And Variable-Speed-Drive Systems To Reduce Laboratory Exhaust Fan Energy, Gang Wang, Mingsheng Liu

Durham School of Architectural Engineering and Construction: Faculty Publications

In buildings that contain laboratories, fume hoods are normally used to control contaminant concentrations. Exhaust stacks with a constant exit velocity are required to make sure that dangerous concentrations do not occur in occupied areas near the building or on the roof top. To achieve constant velocity when exhaust flow rates are less than design, makeup air is introduced to the system at the inlet of the exhaust fan. Since laboratory exhaust airflow is often significantly less than the design airflow, exhaust fans consume significantly more energy than is necessary. To reduce exhaust fan energy, techniques involving multiple exhaust stacks …

Evaluating The Impact Of Production Scheduling On Tool Performance, Amr Arisha, Paul Young

Conference papers

Scheduling of a semiconductor manufacturing facility is one of the most complex tasks encountered. Confronted with a high technology product market, semiconductor manufacturing is increasingly more dynamic and competitive in the introduction of new products in shorter time intervals. Simulation provides an effective decision support tool in scheduling of semiconductor manufacturing. Simulation model was developed as a risk assessment tool for one of the implant process area. The model examines the impact of production schedule on tool performance by testing different production scenarios. Production ramping, local buffer capacity, product sequence and product mix seem to be influential factors of the …