Operations Research, Systems Engineering and Industrial Engineering Commons^™

Screen Printing Process Design Of Experiments For Fine Line Printing Of Thick Film Ceramic Substrates, Jianbiao Pan, Gregory L. Tonkay, Alejandro Quintero

Industrial and Manufacturing Engineering

Screen printing has been the dominant method of thick film deposition because of its low cost. Many experiments in industry have been done and many models of the printing process have been developed since the 1960’s. With a growing need for denser packaging and a drive for higher pin count, screen printing has been refined to yield high resolution prints. However, fine line printing is still considered by industry to be difficult. In order to yield high resolution prints with high first pass yields and manufacturing throughput, the printing process must be controlled stringently.

This paper focuses on investigating the …

A Slip-Line Field For Ploughing During Orthogonal Cutting, Daniel J. Waldorf, Richard E. Devor, Shiv. G. Kapoor

Industrial and Manufacturing Engineering

Under normal machining conditions, the cutting forces are primarily due to the bulk shearing of the workpiece material in a narrow zone called the shear zone. However, under finishing conditions, when the uncut chip thickness is of the order of the cutting edge radius, a ploughing component of the forces becomes significant as compared to the shear forces. Predicting forces under these conditions requires an estimate of ploughing. A slip-line field is developed to model the ploughing components of the cutting force. The field is based on other slip-line fields developed for a rigid wedge sliding on a half-space and …

Cracking The Shell To Student Learning: An Innovative Instructional Approach, John R. Olson, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Management and Industrial Engineering courses is motivating students to learn and apply the quantitative and managerial aspects of the material. The aim of our educational methodology is to not only teach and reinforce the core principles of the disciplines, but to have students develop a set of skills that will make them competitive in the classroom and the workforce. Teaching is why a university exists. As a result, the objective of our instructional approach is to attract and retain dedicated students to the fields of Operations Management and Industrial Engineering and to keep those students competitive and in focus with …

Fuzzy Logic Control Of A Model Airplane, Jon C. Ervin, Sema E. Alptekin

Industrial and Manufacturing Engineering

Common uses of fuzzy logic control today are found in relatively simple applications in products. These applications only scratch the surface of the potential of fuzzy logic control in complex mechatronic systems. In order to demonstrate the utility of fuzzy logic in complex device control, a fuzzy logic fly-by-wire system has been developed for a model airplane. The model airplane is a complex system of several critical inputs that require rapid processing and action in order to maintain flight stability. In addition, payload and power constraints severely limit the size, weight and processing power of the hardware to be carried …

Using Simulation To Derive Activity-Based Costing Estimates, Paul Savory, Robert Williams

Department of Industrial and Management Systems Engineering: Faculty Publications

This presentation showcases integrating activity based costing into the development of a SIMAN simulation of a manufacturing system.

The Role Of Air Cargo In California's Goods Movement, H.-S. Jacob Tsao

Faculty Publications

Caltrans began a systematic investigation into the role of air cargo in California’s goods movement, as part of the larger development effort for a statewide goods movement strategy, and funded a research project in 1997 for the Institute of Transportation Studies at U.C. Berkeley to (i) gain a broader understanding of the State’s air cargo industry and the role of air cargo in California’s goods movement, (ii) assess the importance of air cargo to the State’s economy, (iii) begin identification of issues hindering efficient air cargo movement in the State, and (iv) explore possible State roles for resolving the issues. …

Low Vision, Stimulus Encoding And Information Processing: A Characterization Of Performance Of Partially Sighted Users On Computer-Based Tasks, Max A. Dixon

FIU Electronic Theses and Dissertations

This study focuses on the characterization of partially sighted users' performance within a graphical user interface environment. Participants, ranging in visual abilities from fully sighted (FSU) with no visual impairments to partially sighted (PSU) with limited visual abilities, participated in computer-based search and select tasks. It is shown that visual search strategies employed by both PSU and FSU within a graphical user interface can be described by Steinberg's (1969) Additive Factor Model. In addition, selection strategies, measured by mouse movement times, are linearly related and highly correlated to the Index of Difficulty as explained by Fitts' Law. This is the …

Development And Realization Of A Single-Mode Optical Fiber Ferrule Mold Insert With Twelve Channels, Hsiharng William Yang

Doctoral Dissertations

A manufacturing process for an optical fiber ferrule mold insert with twelve channels has been established. This research project presents mask design, mask fabrication, deep X-ray lithography exposure, resist developing, nickel electroforming, as well as surface finishing to attain the final result. Deep X-ray mask fabrication methods are explored, including mechanically machined masks, micro-EDM masks, and E-beam written masks. The exposures to pattern resists and electroforming to fabricate nickel molds up to 500 $\mu$m thickness are reported in this study. Nickel structures for the optical fiber ferrule insert with twelve channels made by electroforming are the final products. A practical …

Meta-Ethnographic Development Of A Dialogue Methodology Applied To Organization Discourse, Shelley P. Gallup

Engineering Management & Systems Engineering Theses & Dissertations

A gap exists between theoretical stances that acknowledge the importance of dialogue as a dynamic within socially constructed structures, and "steersmanship" of those constructs--e.g., directing, intervening or transforming organizations. A "mechanism" which links theory with practice is missing, leaving practitioners with an acknowledgment of dialogue's central position, but without tools to enact this centrality in practice or research. This research constructs a conceptual model of dialogue, derived from the literature. Using this model as a base, the research seeks to generate a dialogue methodology bridging theory and practice with respect to organizational dialogue. The model, methodology, and research results are …

Psychophysically Derived Work Frequencies For Manual Pouring Operations In The Foundry, Sadat Karim

Masters Theses

This paper presents a study on a combination lift and carrying task and was designed to simulate a metal pouring operation commonly found in foundries. Two laboratory experiments were conducted. The first experiment was designed to study the effects of two different mold heights (0.6096 m. and 0.4572 m.) and two carrying distances (1.2192 m. and 4.572 m.) on physiological response variables and on subjects' rating of perceived exertion while performing a simulated pouring operation at a documented foundry frequency. The second experiment was designed to determine maximum acceptable task frequencies (MAF) for males performing a simulated pouring operation at …

A Simulation Model Analysis Of An Mrp System Under Nervousness In Assembly Shops, Bahig Ali Ali

Archived Theses and Dissertations

No abstract provided.

Study Of Human Factors Variables In Battle Outcome Prediction Models, David Andrew Glovier

Engineering Management & Systems Engineering Theses & Dissertations

Over time there have been many improvements in models that are used to predict the outcome of battles. Currently there is much supposition and speculation surrounding the use of human performance related factors as additional inputs to battle simulation models to improve their accuracy. However there is no conclusive scientific evidence which shows that these factors do make a significant difference. This study investigates the use of factors that may impact on the human performance directly or indirectly in battle prediction models. These factors consist of traditional human factors and external factors that may influence the human performance. The research …

A Study To Analyze And Improve Mechanical And Electro-Mechanical Designs Using Design For Quality Manufacturability (Dfqm) Technique, Bhavani P. Veerapaneni

Theses

The competitive nature of modern manufacturing demands that an innovative approach be used to build advanced and robust designs. Shortening the product development time, which is the period from initial design to full production, is a priority to most manufacturers today. Design for Quality Manufacturability (DFQM) is a methodology to address manufacturing / assembly quality issues during product design. As a consequence DFQM helps shorten the product development time.

The DFQM methodology addresses the issue of quality manufacturability (QM) - the likely hood that defects will occur during the manufacture of a product in a standard plant. The DFQM architecture …

A Multithreaded Scheduler For A High-Speed Simulator, Gene Saghi, Kirk Reinholtz, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

The Cassini spacecraft is on its journey to Saturn to perform a close-up study of the Saturnian system; its rings, moons, magneto-sphere, and the planet itself. Sequences of commands will be sent to the spacecraft by ground personnel to control every aspect of the mission. To validate and verify these command sequences, a bit-level, high-speed simulator (HSS) has been developed. To maximize performance, the HSS is implemented with multiple threads and runs on a multiprocessor system. A key component of the HSS is the scheduler, which controls the execution of the simulator. The general framework of the scheduler can be …

Mass Transfer With Chemical Reaction In The Process Of Ammonia Desorption From Aqueous Solutions Containing Carbon Dioxide, Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Blending Top-Down And Bottom-Up Approaches In Conceptual Design, Janis P. Terpenny, Bartholomew O. Nnaji, Jan Helge Bøhn

Janis P. Terpenny

In recent years, there has been significant attention given to improved methods and tools for engineering design. While advances for the latter stages of design have been impressive, this has not been the case for the early stages of design. In general, advances have provided for either a top-down or a bottom-up approach to design; ignoring the requirements for both abstraction and detail in a concurrently engineered development process. This paper describes an integrated conceptual modeling framework for a blended methodology. The utility and extensibility of this framework are considered in discussion and by way of examples.