Operations Research, Systems Engineering and Industrial Engineering Commons^™

Applications Of Cobb-Douglas Production Function In Construction Time-Cost Analysis, Ashkan Hassani

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Cobb-Douglas Production Function was widely used in economics and productivity studies across many sectors. The function’s quantitative modeling of resource inputs and production outputs is appealing to the research domain of construction management. In this thesis we explored this function’s application in construction schedule crashing and project risk analysis related to duration of construction projects. Existing research on construction time-cost tradeoff issues rarely explore the origin of the crashing cost which is defined as the cost needed to shorten the project to the desired duration. In the existing literature crashing cost function was either assumed without much justification, or came …

Machining Stability Of Wire Edm Of Titanium, Farnaz Nourbakhsh

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

This work presents an experimental investigation of wire electro-discharge machining (WEDM) of titanium alloy. The outstanding characteristics of titanium alloys such as their compatibility and noticeable physical, mechanical and biological performances has led to increased application of them in various industries especially in biomedical industries over the last 50 years. However, due to low thermal conductivity of titanium and its alloys and their reactivity with cobalt in most tool materials, there are some difficulties in machining titanium and its alloys by conventional machining. On the other hand, unconventional machining processes especially Wire Electrical Discharge Machining (WEDM) are more appropriate techniques …

Three-Dimensional Indoor Rfid Localization System, Jiaqing Wu

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Radio Frequency Identification (RFID) is an information exchange technology based on radio waves communication. It is also a possible solution to indoor localization. Due to multipath propagation and anisotropic interference in the indoor environment, theoretical propagation models are generally not sufficient for RFID-based localization. In fact, the radio frequency (RF) signal distribution may not even be monotonic and this makes range-based localization algorithms less accurate. On the other hand, range free localization algorithms, such as k Nearest-Neighbor (kNN), require reference tags to be spread throughout the whole three-dimensional (3D) space which is simply not practical. In this work, a hybrid …

Sustainability For Die Manufacturing: Comparative Study Of Wedm And Milling, Matthew S. Kalus

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Sustainability is more important in today's culture due to the increasing demand for a more eco-friendly society. Concentrations in minimizing and reducing environmental impacts, energy and natural resources have been forthcoming in industry. The tool, mold and die industries are the most well known industries that machine harder materials using mills and WEDM. The objective of this thesis was to compare the sustainability differences in both of these machines utilizing the accepted standards for evaluating the manufacturing process performance for sustainability. These standards include the evaluation of the process parameters, raw materials, power, tools and fluids which all contribute to …

Capacity Planning For Elderly Care In Ireland Using Simluation Modeling, Mohamed Ragab, Waleed Abo Hamad, Amr Arisha

Conference papers

Global population aging is creating an immense pressure on healthcare facilities making them unable to cope with the growing demand for elderly healthcare services. Current demand-supply gaps result in prolonged waiting times for patients and substantial cost burdens for healthcare systems due to delayed discharges. This paper describes a project aimed at presenting modeling and simulation to address elderly care pathways within the Irish healthcare sector. The management of frail patients admitted to acute hospitals and the introduction of the new intermediate care beds are alternative interventions that healthcare executives are interested in simulating to examine their impact on the …

Droplet Spray Behavior Of An Atomization-Based Cutting Fluid (Acf) System For Machining Of Titanium Alloys, Chandra Nath, Shiv G. Kapoor, Anil K. Srivastava, Jon Iverson

Manufacturing & Industrial Engineering Faculty Publications and Presentations

The aim of this research is to study droplet spray characteristics of an atomization-based cutting fluid (ACF) spray system including droplet entrainment angle and flow development regions with respect to three ACF spray parameters, viz., droplet and gas velocities, and spray distance. ACF spray experiments are performed by varying droplet and gas velocities. The flow development behavior is studied by modeling the droplets entrainment mechanism, and the density and distribution of the droplets across the jet flare. Machining experiments are also performed in order to understand the effect of the droplet spray behavior on the machining performances, viz., tool life/wear, …

Toe Brace Designs, Tarun Goswami, Allison L. Van Horn, Alexander O. Sheets

Biomedical, Industrial & Human Factors Engineering Faculty Publications

In various embodiments, provided are braces for use in supporting the metatarophalangeal joint, reducing or maintaining the intermetatarsal angle, enhancing or maintaining alignment of the hallux, or combinations thereof in a subject having hallux valgus.

Work In Progress: Outreach Assessment: Measuring Engagement, Lizabeth Schlemer, John Oliver, Katherine Chen, Sophia Rodriguez Mata, Eric Kim

Industrial and Manufacturing Engineering

The Learn By Doing Lab (LBDL) at Cal Poly, San Luis Obispo is an on-campus laboratory where 5th through 8th grade students are taught by undergraduates who may be planning a careers in teaching. The two populations - elementary students and undergraduates - are equally important in the process. Since 2008, the lab has seen over 4000 elementary and junior high students and over 100 undergrads have participated. In most outreach assessment the number of individuals participating is an important metric, but this last Spring we experimented with a more in depth measure of effectiveness. As in any learning experience …

Purchasing Green Transport And Logistics Services: Implications For Small Business, Pietro Evangelista, Maria Huge-Brodin, Karin Isaksson, Edward Sweeney

Articles

Considering its strong environmental impact, logistics plays a critical role in green supply chain management. It provides strategic links in the supply chain and is an essential function in the delivery of green products to the consumer. There is a general consensus on the fact that more environmentally sustainable companies may be achieved only if transport and logistics activities also become greener. To achieve this objective, buyer companies need to incorporate green considerations in the purchasing of transport and logistics services. This appears particularly challenging for small and medium sized enterprises (SMEs) because of their traditional lack of managerial, organisational …

The Rhetoric And Reality Of Supply Chain Management In Irish Business, Edward Sweeney

Practitioner Journals

A strong focus of NITL’s research activity is on monitoring the extent to which SCM principles and concepts are adopted by organisations based in Ireland. For more than a decade this work has aimed to develop a profile of SCM adoption, as well as identifying some of the critical success factors and barriers influencing firms in their attempts to improve supply chain capability and performance. This article explains the role of SCM in Ireland’s economic recovery and provides an overview of NITL’s latest findings in relation to the adoption of SCM practices by firms in Ireland.

A Model For Optimizing The Allocation Of Ethanol Production In The U.S., Anali Huggins

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

In the last five years, fuel prices have fluctuated from 2.86$/gallon to 3.87$/gallon which represents an increase of 35%. This situation has collocated the ethanol manufacturing in an advantageous situation. However, a major problem that is faced by the ethanol producers is the high cost of transportation. The objective of this thesis study is to determine the optimal allocation of ethanol production in the U.S. in 2009 that minimizes the transportation cost. This thesis is based on the application of a linear programing model. The thesis is focused on two questions. The first is the optimal allocation of ethanol between …

Simulation Of Tax Revenues From Individuals Receiving Advanced College Degrees, Dejing Kong

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

State governments always want graduates who received higher education in universities and colleges to stimulate the economic growth of the state. Many state universities want to contribute more to the state’s economy as well, and state universities frequently have relevant economic development activities and offices. The state universities normally receive annual budgeted financial support and occasional special funding from the state government while the state expects contributions to the economic growth and an educated citizen in return. In this research, the economic impact of a graduate degree funded by the state government was considered in the state of Nebraska.

Simulation …

Quantity And Capacity Expansion Decisions For Ethanol In Nebraska And A Medium Sized Plant, Mahsa Khoshnoud

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Corn-based ethanol is the leader of sustainable sources of energy in the United States due to the abundance of corn and the popularity of ethanol-gasoline mixes. Over the past decade, ethanol production has risen from 1.5 million gallons in 1999 to 13 million gallons in 2011. This increase in production requires expansion of ethanol plants. Since Nebraska is the second highest producer of ethanol, we focus our research on the expansion of ethanol plants in Nebraska.

The aim of this study is to develop an optimization model for capital investments in ethanol in Nebraska and a medium sized ethanol plant …

Economic Impact On Annual Profit Of A Retail Inventory Management System When Using Rfid And Considering Discrepancy Ratio, Inaccuracy Ratio, Backorders, And Federal Income Tax, Liyuan Zhang

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Radio Frequency Identification (RFID) emerged as an important technology with the ability to improve the efficiency and accuracy of object tracking. It has brought cost savings and added value to a wide variety of fields. Retail inventory management system is one of the beneficial fields. In order to better satisfy customers and to improve profit, retailers demand high accuracy in inventory management to service customers without redundant on-hand inventories. The RFID technology, which provides more accurate tracking, can improve retailers’ profit.

Two accuracy factors were proposed to determine the difference in the profit of a retailer inventory management system caused …

Development And Validation Of A Model For Granular Material Volume Measurements, Pourya Fasounaki

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Keeping inventory record of packed grains in silos poses challenges since the bulk material’s different segments do not discharge uniformly, leading to formation of random peaks and valleys on the surface. To facilitate obtaining accurate volume measurement of the grains by taking into account this non-linear behavior on the surface, laser or plumb-bob level-sensing devices are employed at different part of the surface to probe the level of material under those regions.

The main goals of this research is to study the behavior of granular material in silo while discharging downward and by doing so, differentiate certain flow patterns formed …

Current Trends Of Fmri In Vision Science: A Review, Nasser H. Kashou

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Studying brain functional activities is an area that is experiencing rapid interest in the field of neuroimaging. Functional magnetic resonance imaging (fMRI) has provided vision science researchers a powerful and noninvasive tool to understand eye function and correlate it with brain activities. In this chapter, we focus on the physiological aspects followed by a literature review. More specifically, to motivate and appreciate the complexity of the visual system, we will begin with a description of specific stages the visual pathway, beginning from the distal stimulus and ending in the visual cortex. More importantly, the development of ascending visual pathway will …

Improving Health Care Quality And Safety: The Development And Assessment Of Laparoscopic Surgery Instrumentation, Practices And Procedures, Bernadette Mccrory

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Adverse events due to medical errors are a leading cause of death in the United States exceeding the mortality rates of motor vehicle accidents, breast cancer and AIDS. Improvements can and should be made to reduce the rates of preventable surgical errors since they account for nearly half of all adverse events within hospitals. Although minimally invasive surgery has proven patient benefits such as reduced postoperative pain and hospital stay, its operative environment imposes substantial physical and cognitive strain on the surgeon increasing the risk of error. In order to mitigate errors and protect patients, a multidisciplinary approach was taken …

Integrating Courses Through Project Based Learning, Lizabeth Schlemer, Sema E. Alptekin, Karen R. Bangs

Industrial and Manufacturing Engineering

Integrating three courses (one sophomore level, two senior level) through Project Based Learning (PBL) within the Industrial Engineering curriculum at the California Polytechnic State University, San Luis Obispo is presented. Three courses (IME 443 Facilities Planning and Design - senior level; IME 420 Simulation - senior level; and IME 223 Process Improvement Fundamentals - sophomore level) were linked by various mechanisms: Common industry projects, common students in two of the three courses; senior students having access to sophomores in their teams to carry out time consuming tasks such as time studies, and sophomores having access to seniors as team members, …

Sustainable Purchasing Practices: An Investigation Into Current Industry Awareness And Practice., Francis X. Palisi

Purdue Polytechnic Masters Theses

This research study illustrates the growing importance of sustainable purchasing practices and answers two important questions: what is the current awareness of U.S. organizations on sustainable purchasing practices with regards to evaluating, selecting, and retaining suppliers and to what extent are these practices being implemented? The research conducted is based upon an in-depth literature review of green purchasing and sustainability initiatives. With an ever increasing global economy with no intention of slowing down it is ever important to look towards sustainability practices and the biggest impact organizations can make is in the purchasing department. The researcher begins by explaining their …

A Case Study Investigation On Purchasing Green Transport And Logistics Services, Pietro Evangelista, Maria Huge-Brodin, Karin Isaksson, Edward Sweeney

Conference papers

In the context of green supply chain management, green purchasing has received increased attention over the past decade and the strategic importance of introducing green aspects into purchasing practices has been recognised. Despite this growing importance, little has been written in relation to purchasing green transport and logistics services. Considering the strong environmental impact associated with transport and logistics activities, much remains to be learned concerning buyer’s practices when sourcing more sustainable services from third party logistics companies (3PLs). The aim of this paper is to explore practices of buying green transport and logistics services in three different European countries …

Effect Of Gold Content On The Microstructural Evolution Of Sac305 Solder Joints Under Isothermal Aging, Mike Powers, Jianbiao Pan, Julie Silk, Patrick Hyland

Industrial and Manufacturing Engineering

Au over Ni on Cu is a widely used printed circuit board (PCB) surface finish, under bump metallization (UBM), and component lead metallization. It is generally accepted that less than 3 wt.% Au in Sn-Pb solder joints inhibits formation of detrimental intermetallic compounds (IMC). However, the critical limit for Au content in Pb-free solder joints is not well established. Three surface-mount package platforms, one with a matte Sn surface finish and the others with Ni/Au finish, were soldered to Ni/Au-finished PCB using Sn-3.0Ag- 0.5Cu (SAC305) solder, in a realistic manufacturing setting. The assembled boards were divided into three groups: one …

Assessing Aviation E-Marketplaces: A Mmulti-Criteria Approach., Emilio Esposito, Pietro Evangelista, Michele Mastroianni, Renato Passaro, Edward Sweeney, Claudia-Maria Wagner

Books/Book chapters

After a proliferation of logistics e-Marketplaces during the dot.com boom of 1998-2000, there has been a high rate of failure and survivals are developing much more slowly than expected. This is the case in the aviation industry where a large number of B2B e-Marketplaces emerged according to the focus of aviation companies’ strategies on electronic B2B in the late 1990s. However, the current use of e-Marketplaces in the industry is low and many of them have ceased trading. The traditional e-Marketplaces model has been characterised by poor quality portals and a lack of technical standards. Such an approach is unsustainable …

The Morphology Evolution And Voiding Of Solder Joints On Qfn Central Pads With A Ni/Au Finish, Julie Silk, Jianbiao Pan, Mike Powers

Industrial and Manufacturing Engineering

In this paper, we report on a comprehensive study regarding the morphology evolution and voiding of SnAgCu solder joints on the central pad of two different packages – QFN and an Agilent package called TOPS – on PCBs with a Ni/Au surface finish. Samples were isothermally aged at the equivalent of 0, 2, 7 and 14 years service life. Representative solder joints were cross-sectioned and analyzed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) in order to investigate the evolution of the solder joint morphology as a function of Au content and isothermal aging. IMC thickness was …

New Window On Optical Brain Imaging; Medical Development, Simulations And Applications, Chemseddine Mansouri, Nasser H. Kashou

Biomedical, Industrial & Human Factors Engineering Faculty Publications

In this chapter we hope to give a technological review of near-infrared light and systems, discuss optode design considerations including background on the fiber design as it relates to this field and finally touch on current trends and applications. For the latter, we will focus on diffusion theory and simulation of photon propagation using a head model. We will follow this with concluding remarks.

The Economic Impacts Of Technical Change In Carbon Capture, Peter G. Rasmussen

Masters Theses 1911 - February 2014

There is a general consensus in the literature that carbon capture and storage (CCS), a technology that controls CO₂ emissions from fossil fuel power plants, figures to be a critical technology to reduce CO₂ emissions to CO₂ concentration stabilization levels prescribed in the literature. We completed three projects that advance the understanding of how technical change in carbon capture affects both near-future costs of CCS and the economy in the long term. First, we conducted a literature review of near-future capture cost estimates in order to get an idea of how expensive carbon capture will be in …

Optimizing The Safety Stock Inventory Cost Under Target Service Level Constraints, Chetan T. Shivsharan

Masters Theses 1911 - February 2014

The level of customer satisfaction largely depends on manufacturer’s ability to respond to customer orders with promptness. The swiftness with which the manufacturers are able to meet customer demand is measured by the service level. There are two service level measures typically used. The first one is type 1 service level which denotes the probability of not stocking out over a planning period. The other is fill rate which denotes the proportion of demand satisfied with the existing inventory. We review the rich and diverse literature available on inventory cost optimization under these service level constraints. Subsequently two optimization models …

Using Buffers And Work-Sharing For Minimizing Makespan Of Small Batches In Assembly Lines Under Learning Effects, Yossi Bukchin, Efrat Wexler

12th IMHRC Proceedings (Gardanne, France – 2012)

The effect of workers’ learning curve on production rate in manual assembly lines is significant when producing relatively small batches of different products. This research analyzes this effect and suggests applying work-sharing among the workers in such an environment to improve the time to complete the batch, namely, the makespan. Work-sharing refers to a situation where adjacent workers help each other in order to reduce idle times caused by blockage and starvation. The effect of work-sharing and existence of buffers on the makespan is examined and compared to a baseline situation, with no work-sharing and buffers. We present mixedinteger linear-programing …

A Yard Crane Scheduling Problem With Practical Constraints, Amin Hossein Gharehgozli, Yugang Yu, Rene De Koster, Gilbert Laporte

12th IMHRC Proceedings (Gardanne, France – 2012)

The problem considered in this paper is to locate storage containers while a set of container storage and retrieval requests are sequenced. Two automated cranes stack and retrieve containers in a single block of a yard. The cranes cannot pass each other and must be separated by a safety distance. Storage containers are initially located at the seaside and land side input/output (I/O) points of the block. Each must be stacked in a specific location of the block, selected from a set of open locations suitable for stacking the storage container. Retrieval containers are initially located in the block and …

Knowledge-Based Methods For Efficient Material Handling Equipment Development, Dirk Jodin, Christian Landschützer

12th IMHRC Proceedings (Gardanne, France – 2012)

This paper focuses on the Knowledge-based engineering (KBE) method and general Knowledge-based technologies for automated design of material handling products. As in vehicle and aerospace engineering this is a widespread technology, the authors try to introduce the main benefits of KBE for the material handling equipment design. The benefits of KBE, as faster and more accurate (safer) product development, customized products and knowledge of employees captured within a knowledge management system, let KBE hold many promising possibilities within, to deal with nowadays demands on engineering development, driven by cost reductions and time shortcuttings. The authors introduce the actual stage of …

Hybrid Heuristics For Infinite Period Inventory Routing Problem, Ronald Askin, Mingjun Xia

12th IMHRC Proceedings (Gardanne, France – 2012)

In this paper, we address a one-to-many distribution network inventory routing problem over an infinite planning horizon. Each retailer has an independent, random demand, and the distribution center uses capacitated vehicles for routing delivery. The demand at each retailer is relatively small compared to the vehicle capacity. A novel mathematical model is given to simultaneously decide the optimal routing tours to retailers and routing frequencies of each route. Several heuristics are developed to solve large scale instances of the problem.