Operations Research, Systems Engineering and Industrial Engineering Commons^™

Effect Of Horizontal Offset On Vertical Compression Strength Of Stacked Corrugated Fiberboard Boxes, Jay Singh, S. Paul Singh, Koushik Saha

Industrial Technology and Packaging

The purpose of this study was to evaluate the effect of horizontal offset on the compression strength of stacked box configurations. Four different boxes of varying sizes and similar board combinations, made from similar flute but different manufacturers were studied. The single box compression strength for each type of box was determined to represent as the control for this study. The compression strength of control boxes were compared to overall strength of a three-high stack and in three different offset configurations. In addition a set of perfectly aligned boxes were compared to overall strength of a three-high stack and in …

Effect Of Palletized Box Offset On Compression Strength Of Unitized And Stacked Empty Corrugated Fiberboard Boxes, S. Paul Singh, Jay Singh, Koushik Saha

Industrial Technology and Packaging

The purpose of this study was to evaluate the effect of pallet type, tie-sheet and stack configuration on compression strength of a palletized load of boxes. Four boxes made from similar board grade and different dimensions were selected for this study. The column stack configuration which represented the control was compared with the 3 stack configurations either on a CHEP® or GMA pallet. The unitized load either had a tie-sheet in between layers or no tie-sheet between layers of boxes on the respective pallets, for compression strength comparison with the control unitized load represented by a column stack configuration. This …

A System Model For Green Manufacturing, Ahmed M. Deif

Industrial Technology and Packaging

Manufacturing systems evolution is afunction in multiple external and internal factors. With today’s global awareness of environmental risks as well as the pressing needs to compete through efficiency, manufacturing systems are evolving into a new paradigm. This paper presents a system model for the new green manufacturing paradigm. The model captures various planning activities to migrate from a less green into a greener and more eco-efficient manufacturing. The various planning stages are accompanied by the required control metrics as well as various green tools in an open mixed architecture. The system model is demonstrated by an industrial case study. The …

Evaluation Of An Innovative System For Improving Readability Of Passive Uhf Rfid Tags Attached To Reusable Plastic Containers, Jay A. Singh, S. Roy, B. Roesner

Industrial Technology and Packaging

Radio frequency identification (RFID) is a contactless identification technology that has proven to work well in conjunction with reusable plastic containers (RPCs). The impact of this technology on returnable containers has been explored by several past studies. This study evaluates an innovative system for improving readability of passive UHF RFID tags in conjunction with RPCs. The system involves an energy transfer device (ETD), which when attached to the RPCs, passively transfers radio frequency signals to interior regions of a unitized load thereby improving the readability of all RFID tags attached to the RPCs. This study included an evaluation of the …

An Exploratory Model For Predicting Post-Consumer Recycled Pet Content In Pet Sheets, Dong Ho Kang, Rafael Auras, Keith Vorst, Jay Singh

Industrial Technology and Packaging

An exploratory model for determining post-consumer recycled polyethylene terephthalate (PET) content in PET sheets for one specific stream of mechanically recycled PET (RPET) was developed. Six kinds of PET sheets with varying percent of virgin (V) and recycled (R) PET contents (i.e., 100V, 80V20R, 60V40R, 40V60R, 20V80R, and 100R PET) were commercially extruded. The optical, thermal, physicomechanical and barrier properties of the PET sheets were evaluated as function of RPET content. Differences were found between the sheets for UV and visible light absorption in the regions 200–350 nm and 670–700 nm, respectively. Intrinsic viscosities of 100V and 100R PET sheets …

Life Cycle Inventory Of Hdpe Bottle-Based Liquid Milk Packaging Systems, Jay Singh, Aric Krasowski, S. Paul Singh

Industrial Technology and Packaging

This study aims at providing a relatively straightforward methodology to serve as a decision-making tool when more than one packaging solution could be available to a user. It involves a life cycle inventory (LCI) analysis and comparison of three currently available 3.79 l (1 gallon) packaging systems for liquid milk. Two of the primary container types studied use reusable plastic crates (RPCs) for stacking and shipping,
while the third type is a heavier duty container that does not require secondary shipping containers. The three primary containers studied are identified as original, cube and stackable throughout this paper. The study shows …

A Multiple Performance Analysis Of Market-Capacity Integration Policies, Ahmed M. Deif, Hoda A. Elmaraghy

Industrial Technology and Packaging

A model that uses simulation augmented with Design of Experiments (DOE) is presented to analyse the performance of a Make-to-Order (MTO) reconfigurable manufacturing system with scalable capacity. Unlike the classical capacity scaling policies, the proposed hybrid capacity scaling policy is determined using multiple performance measures that reflect cost, internal stability and responsiveness. The impact of both tactical capacity and marketing policies and their interaction on the overall performance was analysed using DOE techniques and real case data. In addition to the different insights about the trade-offs involved in capacity planning decisions, the presented results challenged the conventional capacity planning wisdoms …

A Dynamic Approach To Determine The Product Flow Nature In Apparel Supply Chain Network, Mohammed Marufuzzaman, Ahmed M. Deif

Industrial Technology and Packaging

This paper presents a novel metric, product flow number, to determine the product flow nature across the supply chain of apparel industries. The metric is based on mapping the dynamics of fluid flow across a pipe to product flow across a supply chain. Numerical analysis is conducted to examine the impact of the different metric parameters on the product flow. Results showed that smooth dynamics can be achieved through scaling production and extending delivery times, while undesirable dynamics are tied to complex product designs and increasing number of suppliers. Finally, the paper demonstrated how the new metric can be used …

Evaluation Of The Stress-Energy Methodology To Predict Transmitted Shock Through Expanded Foam Cushions, J. Singh, L. Ignatova, E. Olsen, P. Singh

Industrial Technology and Packaging

Mechanical stresses experienced by packages in the distribution environment include shock and vibration amongst several others. The destructive effects of these hazards can typically be restricted by using cushioning materials to help protect fragile goods during distribution. ASTM D1596 is the conventional standard used to determine shock absorbing performance of a cushioning material for a given combination of static loading, thickness, and drop height. This industry-accepted standard, however, requires significant amounts of transmitted shock data and can be expensive with respect to costs associated with testing and materials amongst others. Alternate stress-energy-based methodologies, developed in the past decade, recommending a …

Modelling And Analysis Of Dynamic Capacity Complexity In Multi-Stage Production, Ahmed M. Deif, Hoda A. Elmaraghy

Industrial Technology and Packaging

The uncertainty associated with managing dynamic capacity problem is the main source of its complexity. This article presents a system dynamics approach to model and analyse operational complexity of dynamic capacity in multi-stage production. The unique feature of this approach is that it captures the stochastic nature of three main sources of complexity associated with dynamic capacity. These are the demand, internal manufacturing delay and capacity scalability delay. The developed model was demonstrated by an industrial case study of multi-stage printed circuit board assembly line. The analysis of simulation experiments showed that ignoring complexity sources can lead to wrong decisions …

Effect Of Freeze-Thaw Cycling On The Compression Strength Of Folding Cartons Made From Different Materials, Koushik Saha, Bruce Harte, Gary Burgess, Sujeet Adudodla

Industrial Technology and Packaging

The quality of frozen food is known to deteriorate in storage due to water migration, in-pack desiccation and frost formation. These same factors can affect folding cartons. The rate of frozen food and folding carton deterioration is further dependent on temperature fluctuations during storage, transportation, loading and unloading. This study was conducted to compare the compression strength of folding cartons made from CNK (Coated Natural Kraft), SBS (Solid Bleached Sulfate), CRP (Coated recycled paperboard) and PCSBS (Poly coated Solid Bleach Sulfate) after subjecting them to multiple freeze-thaw cycles. Compression tests were performed on empty cartons and cartons filled with frozen …

Life Cycle Inventory Comparison Of Paper And Plastic Based Packaging Systems For Strawberry Distribution, Jay A. Singh, Aric Krasowski

Industrial Technology and Packaging

The goal of this study was to conduct a life Cycle Inventory (Lei) analysis based comparison of eleven primary container and pillow wrap combinations for the distribution of fresh strawberries Three of the primary containers studied were paper based (molded pulp, paperboard and corrugated fiberboard) and three other containers investigated were clamshells or punnets made of polyethylene terephthalate (PET) and recycled PET (rPET) Pillow wraps made of rPET and polylactlde (PLA) were also Included for all punnet/tray style containers The scope of the study ranged from the extraction of raw materials, their processing and formation for all packaging components, product …

An Evaluation Of The Ability Of Rfid Tags To Withstand Distribution Of Fresh Produce In The Rpc Pooling System, Jay A. Singh, S. P. Singh, K. Desautels, K. Saha, E. Olsen

Industrial Technology and Packaging

This study focused on the ability of radio frequency identification (RFID) tags applied on reusable plastic containers (RPCs) to withstand repeated abuse due to physical distribution and storage environment related hazards. It also studied the effect of the chemical cleaning environments that RPCs are commonly exposed to in the pooling/rental systems commonly used to distribute fresh produce. RPCs are being successfully deployed in the US, Europe and Asia to ship fresh produce from growers to retailers. The increasing demand for traceability and tracking of fresh produce from ‘farm to fork’ requires these containers to be monitored and identified in the …

Computer Simulation To Manage Lean Manufacturing Systems, Ahmed Deif

Industrial Technology and Packaging

There is a difference between a lean manufacturing system and a manufacturing system that just applies lean techniques. This paper addresses the previous statement through using computer simulation to explore the impact of applying just in time lean policy on a traditional inventory based production system. A system dynamics model is introduced to capture the different components of the production system. The inventory dynamics of the modeled system is examined against different production scenarios under stochastic demand. Results showed that in systems that are not fully transferred to lean, adopting lean principles are not always beneficial. The paper suggests some …

Measurement, Analysis And Comparison Of Drops Experienced By Packages In Inter-State And Intra-State Next Day Shipments In United States, K. Saha, Jay A. Singh, S. P. Singh

Industrial Technology and Packaging

Several past studies have been conducted for the purpose of measuring and analyzing the dynamics of single package shipping environment for the next day delivery services provided by companies including DHL, FedEx, UPS and USPS. Over the past few decades increased shipping hazard evaluations using data recorders has influenced protective package designs to offer optimized product protection due to a better understanding of the distribution environment. This study analyzes the drops sustained by packages during next day shipments within California (intra-state) using two different carriers—FedEx and OnTrac andwithin United States for shipments to two different regions in east and west …

Measurement And Analysis Of Truck And Rail Vibration Levels In Thailand, V. Chonhenchob, Paul Singh, Jay A. Singh, S. Sittipod, D. Swasdee, Supoj Pratheepthinthong

Industrial Technology and Packaging

Worldwide increase in trade, foreign direct investment, capital flows, migration and the spread of technology has caused an increased focus to be put on designing packages that can protect goods shipped globally. This requires a wide-ranging understanding of the distribution environments on a global basis. Several past studies have mapped the vibration levels for surface transportation along the most popular shipment routes in countries such as Brazil, Canada, China, India and the USA. This study was conducted to provide a comprehensive understanding of the vibration levels observed for truck and rail shipments for major transportation routes in Thailand, one of …

Measurement And Analysis Of Temperature And Pressure In High Altitude Air Shipments, Sher Paul Singh, Jay Singh, J. Stallings, Gary J. Burgess, K. Saha

Industrial Technology and Packaging

This study was performed (at the request of the FAA) to measure temperature and pressure conditions observed by standard packages in the FedEx Next Day Air network and the environmental conditions of passenger aircrafts. To measure the single parcel environment, two destinations known to be served by non-pressurized feeder and pressurized aircrafts in the USA, San Luis Obispo, California, and Twin Falls, Idaho, were used to represent higher altitude paths. Test packages (0.30 × 0.30 × 0.30 m) containing one MadgeTech PRTemp110 recorder were shipped Priority Overnight by FedEx from East Lansing, Michigan. For 6 weeks, two test packages were …

Measurement And Analysis Of ‘Small’ Packages In Next-Day Air Shipments, Sher Paul Singh, Jay Singh, K. C. Chiang, K. Saha

Industrial Technology and Packaging

Packaged goods are shipped globally using various means of transportation. Over the past two decades, there has been a continuous increase in studies that measure and analyze dynamic events that occur to packages during transportation and handling. These data offer useful information to design and test packages, and provide protection from potential hazards like drops and impacts. However, none of the past studies are directed towards single packages regarded as 'smalls'. 'Smalls' or small-package product systems are defined as those with volume of less than 0.013 m³, a longest dimension of 0.356 m and a weight of 4.54 …

Is The Test Of Senior Friendly ⁄Child Resistant Packaging Ethical?, Laura Bix, Javier De La Fuente, Kenneth D. Pimple, Eric Kou

Industrial Technology and Packaging

Research has documented the drastic reduction of unintentional poisonings of children since the introduction of child resistant (CR) packaging. However, studies also indicate that consumers report difficulty using CR packages, in part because tests which determine the ‘senior friendliness’ of CR designs that are used throughout the world disallow people with ‘overt or obvious’ disabilities from being test subjects. Our review of drug package usability suggests that the current tests of CR packaging can and should be revised to correct this problem. We use US legislation, regulation and data to exemplify these points, but the conclusions are applicable to all …

Measurement And Analysis Of Shocks To Products Packaged In Pails In Single Parcel Ground Shipments, Sher Paul Singh, Jay Singh, Pakapol Kittipinyovath

Industrial Technology and Packaging

The objective of this study was to measure and analyse the shocks and impacts experienced by pails in the single parcel distribution environment, with and without a secondary corrugated shipper. The study was conducted in the FedEx Ground shipping environment in the USA. Instrumented 5 gal pails were shipped with and without an outer corrugated box, and with and without handling (precautionary warning) labels, from East Lansing, Michigan to destinations in California and New York. Data recorders were used to collect and analyse shock distribution data (drop heights, drop orientations and number of drops). The results showed that the precautionary …

Effect Of Manufacturer's Joint Fastening Techniques On Compression Strength Of Corrugated Fiberboard Boxes, Jay Singh, A. Attema, Eric Olsen, Keith Vorst

Industrial Technology and Packaging

A flat piece of corrugated fiberboard, which has been cut, slotted and scored, is often referred to as a box blank. For several box styles, in order to convert the box blank into a box, its two ends must be fastened together with tape, staples or adhesives such as water soluble glues. The location at which the two ends meet is known as the manufacturer's joint. There are several variations within the three fastening techniques mentioned with most corrugated box manufacturers following their own protocols for fastening the manufacturer's joints. This study explored the compression and tensile strengths of RSC …

A Computer-Based Approach To Material And Process Selection Using Sustainability And Ecological Criteria, Manocher Djassemi

Industrial Technology and Packaging

Decision on selecting a material or process for a particular product is a common task in product engineering and facility planning. Such decision may have a significant impact on entire product life cycle including raw material acquisition, product manufacture, use, disposal, and environment. Traditional factors for decision making are economical, functional and aesthetical properties of the product. However, the issues of sustainability and environmental impact of materials and manufacturing processes have gained a growing attention in recent decade by general population as well as academicians and industrial practitioners. The objective of this study is to explore a software tool for …

New Pressure Sensitive Device To Measure And Predict Package Drops, Sher Paul Singh, Jay Singh, Young Paek

Industrial Technology and Packaging

Pressurex^®, a tactile pressure sensor film which is manufactured by Sensor Product Inc. (East Hanova, NJ, USA), is one of the emerging materials that is convenient for measurements of the strength of pressure and pressure distribution profile between two contacting surfaces without any instrumentation. It immediately reveals impact distribution and magnitude based on intensity and dispersion of color. The intensity of this color is proportional to the amount of force applied allowing the user to actually quantify the stress characteristics across the impact surface. The objective of this paper was to examine free fall drop test results using …

Packaging Trends For Bottled Water, N. Noble, L. Paul, C. Mcminimee, M. Mallett, Jay Singh

Industrial Technology and Packaging

The Journal of Applied Packaging Research(JAPR) is an international forum for the dissemination of research papers, review articles, tutorials and news about innovative or emerging technologies for the packaging industry. In an effort to introduce research conducted by packaging students to the academics and industry professionals and to provide an outlet for these future stewards of the packaging industry to experience the world of publishing, JAPR, occasionally includes such work in its issues.

Bottled water is drinking water packaged generally in plastic bottles and regulated by national and local agencies. The Beverage Marketing Corporation defines the bottled water market …

Rfid Tag Readability Issues With Palletized Loads Of Consumer Goods, Jay Singh, Eric Olsen, Keith Vorst, K. Tripp

Industrial Technology and Packaging

Radio Frequency Identification (RFID) is an automatic identification technology, relying on storing and remotely retrieving data using devices called RFID tags. This technology is being used in enterprise supply chain management-related applications to improve the efficiency of inventory tracking and management. However, this technology has not been able to realize its promised potential because of several factors, such as lack of congruous worldwide standards, privacy issues and less than perfect read rates in supply chain applications. This research aimed to evaluate the readability issues commonly faced by tagged cases of palletized consumer products. The variables studied in this research were …

Design-An Opportunity In Reducing Corrugated Fiberboard Carbon Footprint, Jay Singh, R. Kisch, J. Chhun, Eric Olsen

Industrial Technology and Packaging

Telescoping Half Slotted Containers (HSC) and Diagonal Corner Bliss style containers are popular choices for packaging agricultural products such as apples, pears, citrus, potatoes, garlic and most vegetables. This study evaluated two unique corrugated container designs, Kisch Full Circle Tray (FCT) and Single V Kisch Bliss, which are both viable designs available to replace the presently used styles of boxes for produce distribution. This paper presents the compression strength results of Telescoping HSC containers as compared to two possible replacements and the Diagonal Corner Bliss designs when stored under standard, refrigerated and tropical conditions. It also compares the material savings …

Flexography Printing Performance Of Pla Film, J. Jacobson, Malcom Keif, Xiaoying Rong, Jay Singh, Keith Vorst

Industrial Technology and Packaging

During the past decade polylactide acid (PLA) polymer has been the subject of numerous researches aimed at comparing it with traditional petroleum based polymers for many packaging applications. PLA is biodegradable and derived from agricultural by-products such as corn starch or other starch-rich substances like maize, sugar or wheat.While PLA is currently being used in many packaging applications with well documented performance, little work has been done comparing printing processes and performance. This study presents PLA printing performance and sustainability findings using the common flexography printing process. Various analytical methods were used to evaluate performance and provide recommendations for optimized …

Effect Of Transport Vibration On Quality Of Minimally Processed And Packaged Fresh-Cut Cantaloupe, Koushik Saha, S. Paul Singh, Bruce Harte

Industrial Technology and Packaging

This study was undertaken to determine the quality of packaged fresh cut cantaloupe subjected to transport vibration after treating with various anti-browning agents. Cantaloupe (Cucumis melo) pieces were dipped in two anti-browning solutions: Treatment- A (2% ascorbic acid + 1% calcium chloride + 0.5% citric acid) and Treatment-B (3% NatureSeal™) for 2 minutes and packaged in bio-based clamshell containers and vibrated for 60 minutes (ASTM 4169, Truck assurance level II). Vibration of cut-cantaloupe packaged in sample containers had a positive effect on the flavor and overall liking. The overall liking scores were higher than 6(slightly like) on a hedonic scale …

Performance Of Pre-Cut Lettuce Packaged In Biodegradable Film Formed On Commercial Vertical-Form-Fill-And-Seal Machines, J. Wyatt Brown, Keith Vorst, Shasta Palmer, Jay A. Singh

Industrial Technology and Packaging

The purpose of this study was to determine the feasibility of using biodegradable films suitable for fresh-cut lettuce with commercial vertical-form-fill-and-seal packaging machines (VVFS) equipped with heat-sealing bars. Biodegradable high-density polyethylene (BHDPE) and polypropylene (BPP) films were tested. Commercial bags of pre-cut Romaine sealed in a polyethylene/oriented polypropylene (PE/OPP) bag formed on a WFS machine were used as the control. All bags were held at 4.4°C, 80% RH and assessed for reduction in quality during storage per a commercial (in-house) standard utilized by a large pre-cut salad packer in Salinas, California. When the biodegradable films were sealed with a VFFS …

Effect Of Truck Vibration During Transport On Damage To Fresh Produce Shipments In Thailand, V. Chonhenchob, S. Sittipod, D. Swasdee, P. Rachtanapun, S. P. Singh, Jay A. Singh

Industrial Technology and Packaging

The increase in global trade allows packaged products to be shipped across borders using inter-modal transportation. Trucks are still the most prevalent mode for surface shipments and time sensitive transport perishable products such as fresh produce. This study focused on measuring the transportation environment in truck shipments from various packing houses to major retail distribution centers in Thailand and then the subsequent distribution to regional stores in smaller trucks. Test measurements were compared to test methods used in North America and Europe. This study compared the quality of cabbage, lettuce, plums and pears after being shipped in truck transport by …