Operations Research, Systems Engineering and Industrial Engineering Commons^™

Component Maintenance Strategies And Risk Analysis For Random Shock Effects Considering Maintenance Costs, Chao Zhang, Yadong Zhang, Hongyan Dui, Shaoping Wang, Mileta Tomovic

Engineering Technology Faculty Publications

Maintenance can improve a system’s reliability in a long operation period or when a component has failed. The reliability modeling method that uses the stochastic process degradation model to describe the system degradation process has been widely used. However, the existing reliability models established using stochastic processes only consider the internal degradation process, and do not fully consider the impact of external random shocks on their reliability modeling. Furthermore, the existing theory of importance does not consider the actual factors of maintenance cost. In this paper, based on the reliability modeling of random processes, the degradation rate under the influence …

Fugacity-Based Lattice Boltzmann Method For Multicomponent Multiphase Systems, Muzammil Soomro, Luis F. Ayala, Cheng Peng, Orlando M. Ayala

Engineering Technology Faculty Publications

The free-energy model can extend the lattice Boltzmann method to multiphase systems. However, there is a lack of models capable of simulating multicomponent multiphase fluids with partial miscibility. In addition, existing models cannot be generalized to honor thermodynamic information provided by any multicomponent equation of state of choice. In this paper, we introduce a free-energy lattice Boltzmann model where the forcing term is determined by the fugacity of the species, the thermodynamic property that connects species partial pressure to chemical potential calculations. By doing so, we are able to carry out multicomponent multiphase simulations of partially miscible fluids and generalize …

Cybersecurity And Digital Privacy Aspects Of V2x In The Ev Charging Structure, Umit Cali, Murat Kuzlu, Onur Elma, Osman Gazi Gucluturk, Ahmet Kilic, Ferhat Ozgur Catak

Engineering Technology Faculty Publications

With the advancement of green energy technology and rising public and political acceptance, electric vehicles (EVs) have grown in popularity. Electric motors, batteries, and charging systems are considered major components of EVs. The electric power infrastructure has been designed to accommodate the needs of EVs, with an emphasis on bidirectional power flow to facilitate power exchange. Furthermore, the communication infrastructure has been enhanced to enable cars to communicate and exchange information with one another, also known as Vehicle-to-Everything (V2X) technology. V2X is positioned to become a bigger and smarter system in the future of transportation, thanks to upcoming digital technologies …

Performance Degradation Based On Importance Change And Application In Dissimilar Redundancy Actuation System, Yadong Zhang, Chao Zhang, Shaoping Wang, Rentong Chen, Mileta M. Tomovic

Engineering Technology Faculty Publications

The importance measure is a crucial method to identify and evaluate the system weak link. It is widely used in the optimization design and maintenance decision of aviation, aerospace, nuclear energy and other systems. The dissimilar redundancy actuation system (DRAS) is a key aircraft control subsystem which performs aircraft attitude and flight trajectory control. Its performance and reliability directly affect the aircraft flight quality and flight safety. This paper considers the influence of the Birnbaum importance measure (BIM) and integrated importance measure (IIM) on the reliability changes of key components in DRAS. The differences of physical fault characteristics of different …

Importance Measure-Based Maintenance Strategy Considering Maintenance Costs, Chao Zhang, Yadong Zhang, Hongyan Dui, Shaoping Wang, Mileta M. Tomovic

Engineering Technology Faculty Publications

Maintenance is an important way to ensure the best performance of repairable systems. This paper considers how to reduce system maintenance cost while ensuring consistent system performance. Due to budget constraints, preventive maintenance (PM) can be done on only some of the system components. Also, different selections of components to be maintained can have markedly different effects on system performance. On the basis of the above issues, this paper proposes an importance-based maintenance priority (IBMP) model to guide the selection of PM components. Then the model is extended to find the degree of correlation between two components to be maintained …

Opportunistic Maintenance Strategy Of A Heave Compensation System For Expected Performance Degradation, Chao Zhang, Yujie Qian, Hongyan Dui, Shaoping Wang, Rentong Chen, Mileta M. Tomovic

Engineering Technology Faculty Publications

In the marine industry, heave compensation systems are applied to marine equipment to compensate for the adverse effects of waves and the hydraulic system is usually used as the power system of heave compensation systems. This article introduces importance theory to the opportunistic maintenance (OM) strategy to provide guidance for the maintenance of heave compensation systems. The working principle of a semi-active heave compensation system and the specific working states of its hydraulic components are also first explained. Opportunistic maintenance is applied to the semi-active heave compensation system. Moreover, the joint integrated importance measure (JIIM) between different components at different …

Reliability Estimation Of Reciprocating Seals Based On Multivariate Dependence Analysis And It's Experimental Validation, Chao Zhang, Rentong Chen, Shaoping Wang, Yujie Qian, Mileta M. Tomovic

Engineering Technology Faculty Publications

Accurate reliability estimation for reciprocating seals is of great significance due to their wide use in numerous engineering applications. This work proposes a reliability estimation method for reciprocating seals based on multivariate dependence analysis of different performance indicators. Degradation behavior corresponding to each performance indicator is first described by the Wiener process. Dependence among different performance indicators is then captured using D-vine copula, and a weight-based copula selection method is utilized to determine the optimal bivariate copula for each dependence relationship. A two-stage Bayesian method is used to estimate the parameters in the proposed model. Finally, a reciprocating seal degradation …

The Reconfigurable Machinery Efficient Workspace Analysis Based On The Twist Angles, Ana M. Djuric, Vukica Jovanovic, Mirjana Filipovic, Ljubinko Kevac

Engineering Technology Faculty Publications

A novel methodology for the calculation, visualisation and analysis of the Reconfigurable Machinery Efficient Workspace (RMEW), based on the twist angles, is presented in this paper. The machinery's kinematic parameters are used for calculating the workspace, while the efficient workspace is associated with the machinery's path and includes the end-effector position and orientation. To analyse and visualise many different machinery efficient workspaces at the same time, the calculation is based on the previously developed and validated complex reconfigurable machinery's kinematic structure named n-DOF Global Kinematic Model (n-GKM). An industrial robot is used as an example to demonstrate …

Applications Of Digital Manufacturing In Manufacturing Process Support, Vukica Jovanovic, Mihael Debevec, Niko Herakovic, Alok Verma, Mileta Tomovic

Engineering Technology Faculty Publications

In this study, the authors developed three new approaches and models for improvements related to manufacturing processes. The main focus was on planning in a digital environment before the actual manufacturing process is carried out. The first approach is digital manufacturing, which gives affords the opportunity for performing an entire manufacturing process in a virtual environment. In this way, engineers virtually define, plan, create, monitor, and control all production processes. The planning phase can be done simultaneously, while other manufacturing processes are already in place. In this way, processes can continue with no interruption. Various product lifecycle management tools have …

Period Batch Control - A Production Planning System Applied To Virtual Manufacturing Cells, Z. Tesic, B. Stevanaov, V. Jovanovic, M. Tomic, C. Kafol

Engineering Technology Faculty Publications

Period Batch Control (PBC) system has been known for its implementation with the classical group technology (GT) cells, and it has been known for its simplicity. The main production planning decisions concern the choice of the period length and the stage number and contents. Also, in order to better integrate the production planning with the application of GT cells at the shop floor, the concept of virtual manufacturing cells has been applied. Since virtual cells configurations are changing periodically, a model for implementing the PBC system into virtual manufacturing cells environment is developed. The model enables alignment of the PBC …

Pilot Programs For Veterans Transition To Engineering Fields, Vukica M. Jovanovic, Anthony W. Dean, Carol L. Considine, Karina Arcaute, Petros Katsioloudis, Mileta Tomovic, Thomas B. Stout, Connor Schwalm, Jennifer G. Michaeli, Yuzhong Shen

Engineering Technology Faculty Publications

Veterans, through their active service, frequently receive training in highly skilled technical areas. However, they may lack a theoretical background in underlying engineering principles. They also need additional support with the transition from a highly structured military environment to an environment with more ambiguous time constraints and different sorts of responsibilities. Moreover they are facing challenges which are specific for their student population. Therefore, enabling multiple mechanisms which would support them and provide them necessary guidance are especially important at universities with large veteran populations such as at Old Dominion University in Norfolk, Virginia. Hence, there is a need for …

Enhancing Agility Of Supply Chains Using Stochastic, Discrete Event And Physical Simulation Models, Alok K. Verma

Engineering Technology Faculty Publications

Managing supply chains in today’s distributed manufacturing environment has become more complex. To remain competitive in today’s global marketplace, organizations must streamline their supply chains. The practice of coordinating the design, procurement, flow of goods, services, information and finances, from raw material flows to parts supplier to manufacturer to distributor to retailer and finally to consumer requires synchronized planning and execution. Efficient and effective supply chain management assists an organization in getting the right goods and services to the place needed at the right time, in the proper quantity and at acceptable cost. Managing this process involves developing and overseeing …

A Comparative Analysis Of Spatial Visualization Ability And Drafting Models For Industrial And Technology Education Students, Petros Katsioloudis, Vukica Jovanović, Mildred Jones

Engineering Technology Faculty Publications

The article presents the comparative study on the drafting models and spatial visualization ability of industrial and technology education students in the U.S. It discusses how the study was conducted which examined the issue based on technical drawings and with regards to the impacts of model types. The results reportedly revealed three-dimensional models are effective for promoting learning, however more studies have to be conducted.

Simulating Real-World Work Experience In Engineering Capstone Courses, Thomas H. Deagostino, Vukica M. Jovanovic, M. Brian Thomas

Engineering Technology Faculty Publications

Experiential learning and cooperative education provide students with the necessary tools to succeed in the workplace by simulating their future working environment. Various studies have shown that many graduates have gaps related to their so called "soft skills", which are related to teamwork, time management, working under pressure and tight deadlines. The main purpose of the inclusion of the industry expert in senior design discussions is to provide meaningful feedback through a competitive led by industry practitioners. In this simulation, the senior engineering students take on the role of actual engineering job functions, on a demanding, continuous basis for the …

Analysis Of Possible Use Of Identification Technologies In Disassembly, Vukica Jovanović, Sreten Filipović, Gordana Ostojić, Stevan Stankovski, Milovan Lazarević

Engineering Technology Faculty Publications

The barcodes and Radio Frequency Identification tags that are being used during manufacturing, assembly, warehousing, and distribution could also be reused at the end of the product lifecycle for an identification of the correct disassembly process that would result in recycling of its components. The barcodes or RFID tags can be helpful in identifying objects in terms of sustainable development, regarding disassembly, recycling and reuse. In this paper, the analysis of the current applications of RFID Technology in the final phase of the product lifecycle will be presented. The simulation of the disassembly process supported by both barcode and RFID-enabled …

Measuring Agility Of Organizations - A Comprehensive Agility Measurement Tool (Camt), Ameya S. Erande, Alok K. Verma

Engineering Technology Faculty Publications

Since "Agility" is ability to respond to unpredictable changes with quick response and profitability, it is not industry specific. This "not industry specific" nature of agility makes it hard to assess and measure it on a fixed scale. Measurement of agility of an enterprise has been a major topic of research since inception of agility in 1991. Though some methods have been developed to measure agility, they mainly remain tied to manufacturing industry. As agility is present in all the industries, comprehensive tool to measure it is a necessity in order to determine responsiveness of an enterprise to external turbulences. …

Applying Six Sigma Methodology To The Admissions Process In Higher Education, Alok Verma

Engineering Technology Faculty Publications

Time and quality are two important metrics for improving a company's production and profit performance. Six Sigma is one of the most powerful continuous improvement tools that have been used to improve the quality of products and business processes. Six Sigma methodology provides the techniques and tools to improve the capability and reduce the number of defects in any process. It was originally developed by Motorola to systematically improve processes by eliminating defects. Although, originally developed for manufacturing processes, the tool has been effectively applied to improve business processes also. Evaluation of applications for admission in higher education is often …

Introducing Freshmen To Construction Estimating And Scheduling Using K'Nex Bridge Kits, Carol Considine, Vernon Lewis

Engineering Technology Faculty Publications

The College of Engineering and Technology at Old Dominion University has developed project-based courses for freshmen engineering students in order to engage them in engineering early with the goal of increasing retention. The courses are divided into three five-week modules that are distributed among the various departments within the college. The Engineering Technology department is responsible for two of the five week modules. One module is comprised of all the engineering technology curriculums; civil, electrical and mechanical, and the other module is strictly a civil engineering technology project.

The civil engineering technology project is focused on the construction industry. Students …

Developing A New Program In Marine Engineering Technology, Anthony Dean, Gary Crossman, Alok Verma

Engineering Technology Faculty Publications

The Department of Engineering Technology, in the Batten College of Engineering and Technology at Old Dominion University, in conjunction with members of its advisory board and other industry representatives have begun a sustained effort to promote and develop a strong course of study in Marine Engineering Technology. Located in Norfolk, Virginia, Old Dominion University, and particularly the Department of Engineering Technology, is uniquely positioned to develop such a program. With strong ties to the world's largest Naval Base and superlative shipbuilding, maintenance and repair facilities, early qualitative research indicated high interest for development of such a program in support of …

Design, Development, And Delivery Of Certificate Programs For Funding Opportunities And Industry Collaboration, Carol Considine, Paul Kauffmann

Engineering Technology Faculty Publications

Many engineering technology departments have four general areas that are used for evaluation of tenure and promotion. These areas include teaching, research and scholarly activities, service, and other professional activities. Although teaching is the primary mission in most engineering technology programs, external funding as part of the research area is playing a larger role in tenure decisions at many universities. Many faculty members in engineering technology programs come from an industrial background and do not have a specific research area of interest and contacts within the research community. These faculty members must look at other avenues to develop the external …

Enhancing Instruction In Lean Manufacturing Through Development Of Simulation Activities In Shipbuilding Operations, Alok K. Verma, James Hughes, Scott Christman

Engineering Technology Faculty Publications

Lean Manufacturing is a powerful philosophy that advocates minimization of waste within an organization. The adoption of Lean Manufacturing philosophy by major manufacturers has created a demand for qualified personnel in this area. A training program in Lean Enterprise was developed by Old Dominion University for the Apprentice School at Northrop Grumman Newport News. Physical simulation activities are an integral part of this training program. Simulation activities related to shipbuilding operations have been incorporated in the Lean training course. These activities have been used in the Business Operations course for three semesters. Results show increased student participation and better understanding …