Operations Research, Systems Engineering and Industrial Engineering Commons^™

Manufacturing: The Qualitative Study Of A Transition To A Green Facility, Brandon David Staves

Masters Theses & Specialist Projects

This qualitative study focused on answering three core questions: How have facilities reduce pollutions in regards to the quality of air, water, land, light and noise? Which Types of pollution reduction projects are more or less successful to implement? What types of pollution are facilities focusing on and why? The results of the 15 companies surveyed show a variety of projects that facilities have used to reduce pollution, it also shows that cost is a major factor in the unsuccessful projects, and that facilities are actively focused on reducing Air, Land, and Water pollution. While the data shows a variety …

The Impact Of Executing A Warehouse Management System Change: A Case Study, Nicholas J. Cross

Masters Theses & Specialist Projects

The increased demand on distribution centers to provide quicker turnarounds from receiving to shipping while maintaining precise inventory accuracies is spurring the acquisition of a warehouse management system (WMS) to improve operations and increase efficiency. With the rapid expansion of WMS technology, it seems inevitable that warehouses will outgrow inefficient operational processes and switch to a system that can accommodate rapid development. Research has explained the financial burdens and benefits of acquiring a WMS, but there’s been minimal research describing the impacts of the actual implementation. This study took place within a 600,000 sq. ft. fulfillment center and focused on …

Maquiladoras In Central America: An Analysis Of Workforce Schedule, Productivity And Fatigue., Jose L. Barahona

Masters Theses & Specialist Projects

Textile factories or Maquiladoras are very abundant and predominant in Central American economies. However, they all do not have the same standardized work schedule or routines. Most of the Maquiladoras only follow schedules and regulations established by the current labor laws without taking into consideration many variables within their organization that could affect their overall performance. As a result, the purpose of the study is to analyze the current working structure of a textile Maquiladora and determine the most suitable schedule that will abide with the current working structure but also increase production levels, employee morale and decrease employee fatigue. …

Five Whys Root Cause System Effectiveness: A Two Factor Quantitative Review, Barbara A. Key

Masters Theses & Specialist Projects

Several tools exist for root cause analysis (RCA). Despite this however, many practitioners are not obtaining the quality improvement desired. Those turning to literature for guidance would find most of the information resides in case studies with anecdotal outcomes. Since 5 Whys analysis has been one of the more pervasive tools in use, this study sought to add to the root cause analysis body of knowledge by investigating tool support factors. While studied in conjunction with 5 Whys, the support variables lend themselves to other root cause analysis tools as well. The purpose of the study was to utilize a …

Implementation Of 5s At A Survey Laboratory In Western Kentucky University, Mercy Akunna Ebuetse

Masters Theses & Specialist Projects

5S is a technique used alongside methodologies such as lean, total quality management and six-sigma for continuous improvement and workplace standardization. Nonetheless, despite the upsurge in the implementation of 5S by lean manufacturing facilities and other industries, educational laboratories appear to be lagging. Taking into consideration the benefits of implementing 5S within industry, it has become crucial to replicate the technique in an educational laboratory to obtain equivalent results. To upgrade educational laboratories into industrial laboratories, 5S (sort, set in order, shine, standardize, and sustain) is required to improve the laboratory’s ergonomics that subsequently increases efficiency, productivity, and lessens waste …

Assessment Of Ergonomics In Indian Dental Practice: A Workplace Analysis, Divya Gadde

Masters Theses & Specialist Projects

Dental practice requires unique working conditions such as prolonged working hours, strained body postures and laborious, high finesse dental techniques. However, it can be more efficiently performed by the application of ergonomics, rather than physically forcing the worker's body to fit the job. Posture is highly influenced by factors such as inadequate working level, incorrect patient positioning, and poor visual comfort. In order to eliminate musculoskeletal disorders it is necessary to control these and other factors, and design the human work environment to be more ergonomic. The aim of this study was to assess ergonomics within Indian dental practice and …

Implementing A Total Productive Maintenance Approach Into An Improvement At S Company, Xiaomeng Sun

Masters Theses & Specialist Projects

The study improved the overall equipment effectiveness (OEE) of machines and processes through the implementation of a total productive maintenance (TPM) approach at Company S over a three-month period. By comparing the OEE of equipment before and after the implementation of autonomous maintenance, this study concluded that autonomous maintenance improves OEE. The target of this study was one general product line at a polytetrafluoroethylene (PTFE) plant. Due to time limitations, the study only applied autonomous maintenance to operational activities. This research involved machine and processes selection, condition assessment, baseline OEE assessment, operator training, execution of autonomous maintenance, and OEE measurement. …

Repeatability Case Study Of The 3d Printer In The School Of Engineering And Applied Science Lab, Naif Faleh S. Albaiji

Masters Theses & Specialist Projects

3DP (three-dimensional printing) technologies have become more than just a tool to help companies with prototyping and designing in the pre-production stage. Some firms have already implemented 3DP technology to produce parts and end-use products. However, there are several challenges and barriers that this technology must overcome to replace traditional manufacturing methods. One of the most significant obstacles associated with 3D printing is its low level of accuracy in variable repeatability when it comes to making separate batches of the same product. There are several arguable reasons behind this variation. Some of the factors that can influence repeatability are the …

Supply Chain Performance In The Pharmaceutical Industry In Pakistan, Fakir Moiz Bokhari

Masters Theses & Specialist Projects

This research paper investigated the performance of the supply chain system in the pharmaceutical industry in Pakistan. The study was based on the hypothesis that the adopted supply chain systems lack proper structures to deal with the challenges of the business environment in which they operate, and as such were underperforming. Therefore, the objective was to ascertain the nature and the dynamics of the SCM (Supply Chain Management) system used in the drug industry. The objectives of the research were anchored on three factors that include Supply Chain Flexibility/Agility Performance, Supply Chain Resource Performance, and Supply Chain Output Performance. These …

Innovative Non-Thermal Food Processing Technologies Used By The Food Industry In The United States, Harlin Kaur Saroya

Masters Theses & Specialist Projects

This thesis discussed the non-thermal food processing technologies being used within the United States of America. The technologies discussed in this thesis are High- Pressure Processing (HHP), Pulsed Electric Field, Pulsed Light, Irradiation, Ultra Sound, Oscillating Magnetic Fields, and Cold Atmospheric Plasma. A survey was designed and conducted to study the major reasons behind a preference for a particular technology by the organization, and the limitations for not implementing specific technologies. The survey participants were management level, food scientists and, food technologists employed by food processing companies. The questionnaire consisted of ten questions related to demographics, current technology, barriers from …

Comparing Critical Chain Project Managemenet With Critical Path Method: A Case Study, Behzad Montazeri

Masters Theses & Specialist Projects

Scheduling is a major task in project management. The current scheduling technique, Critical Path Method (CPM), has been widely applied for several decades, but a large number of projects fail to be completed on time and schedule delays occur in many projects. This raises question about the validity of the current project scheduling system. Critical Chain Project Management (CCPM), derived from Theory of Constraints, is a relatively new alternative approach toward scheduling projects. This study compared CCPM and CPM to determine which scheduling method delivers a shorter project duration and has a better usage of resources. A scheduling software called …

In The Face Of Anticipation: Decision Making Under Visible Uncertainty As Present In The Safest-With-Sight Problem, Bryan A. Knowles

Masters Theses & Specialist Projects

Pathfinding, as a process of selecting a fixed route, has long been studied in

Computer Science and Mathematics. Decision making, as a similar, but intrinsically different, process of determining a control policy, is much less studied. Here, I propose a problem that appears to be of the first class, which would suggest that it is easily solvable with a modern machine, but that would be too easy, it turns out. By allowing a pathfinding to anticipate and respond to information, without setting restrictions

on the \structure" of this anticipation, selecting the \best step" appears to be an intractable problem.

After …

Optimization Of Process Parameters In Micro Electrical Discharge Machining (Edm) Of Ti-6al-4v Alloy, Farshid Alavi

Masters Theses & Specialist Projects

Ti-6Al-4V has a wide range of applications such as in the automotive and aerospace industries. Nevertheless, titanium alloys are very difficult to machine by conventional methods. Micro-EDM is a non-conventional machining method that uses the thermal effect of precisely controlled sparks. Manufacturers are looking for the methods and optimal settings to increase the productivity of micro-EDM in terms of lessening machining time and tool wear. Moreover, surface integrity of the machined area is crucial for some products such as biomedical implants.

The objective of this study was to investigate the effects of the micro-EDM process parameters on response variables, in …

Breakdown Voltage Performances Of Aluminum And Copper Conductor Wire Under Compression Stresses, Richard Donald Suchanek Iii

Masters Theses & Specialist Projects

In the global, competitive market of energy transformation, increased operational expenses and depletion of raw materials have resulted in companies pursuing alternate materials to reduce consumer costs. In electrical applications, energy is transformed using materials with high electrical conductive properties. The conductive material used to transmit a signal is called conductor wire and is comprised of any material that has the ability to move charged particles from one point to another without propagation or delay. The conductor wire in many applications is encapsulated in epoxy resin called enamel. The enamel is the insulation system that provides necessary dielectric clearances to …

The Application Of Gage R&R Analysis In S Six Sigma Case Of Improving And Optimizing An Automotive Die Casting Product’S Measurement System, Qizheng Ren

Masters Theses & Specialist Projects

With the rapid development of automation technology in automotive manufacturing processes, massive and efficient production is a current trend. Therefore, measurement systems with accurate and automated measuring instruments are sought by automotive companies and suppliers. However, the problematic measuring instruments with unreliable accuracy and stability lead to erroneous measurements and wrong quality decisions that cause manufacturers huge profit losses. An effective method called “measurement system analysis” can be applied to define and eliminate erroneous measurements to ensure adequate reliability. An automotive transmission die casting parts supplier called company T was suffering a serious profit loss due to the erroneous measurements …

A Case Study Of Multiple-Use Finish Electrodes For Die-Sinking Edm, Troy A. Robertson

Masters Theses & Specialist Projects

This study examines the use of one finishing electrode to finish multiple dies without remachining the electrode. The multiple-use electrode finishing experiment in this study addresses technology in the die-forging industry. Methods of manufacturing spherical straight bevel forge gear dies have relied on die-sinking Electrical Discharge Machining (EDM) practices that showed great potential for advancement. The focus of this study is solely on the improvements of electrode use in EDM finishing-processes. The surface finish quality itself is not an area of concern other than maintaining that it does not diminish. The focused concern is maximizing the process by using one …

The Cadet Training Program Versus The Student Certification Program: A Study Of It- Support Training Programs At Western Kentucky University, Michael Courtney Moore

Masters Theses & Specialist Projects

Technology is a critical component of modern-day success. Advancements in technology have improved communication between individuals and companies. Technological advancements have allowed students to earn college degrees online. People who habitually use technology expect a high level of performance and support. As new technologies are implemented, such as complex web services or new operating systems, the dependence for information technology (IT) support grows in demand. Even learning curves can be cumbersome without proper assistance from IT professionals. Companies and institutions must accommodate user needs by implementing fast, efficient, and friendly support. In order to offer optimal customer support, representatives must …

Examining Strategic Information Technology In Relationship To The Need For Technology Modernization, Jill A. Brown

Masters Theses & Specialist Projects

Strategic planning can be a critical business process for today’s organizations, especially for IT organizations that are facing continually changes in technology. This research was designed to investigate IT organizations’ use of strategic planning and determine if the organization uses their strategic plan to set project priorities. The second part of this research was to determine if the IT strategic plans are aligned with the overall organization’s strategic plan.

This research was conducted using a mail-type survey to IT Executives from organizations with sales/revenues under 100 million dollars, a maximum of 5000 employees, and SIC codes of 201 thru 399. …