Operations Research, Systems Engineering and Industrial Engineering Commons^™

Solar Photovoltaic Performance Monitoring: A Bibliometric Review, Research Gaps And Opportunities, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

Electrical power generation has been revolutionized by growing demand and use of Renewable Energy (RE) sources such as Solar Photovoltaic (SPV) as the main electricity source in modern times. The main objective of this bibliometric analysis is to understand the scope of the literature available for SPV performance characterization. This detailed reviewed was performed on the documents related to SPV research considering all the subject categories from Scopus and Web of Science (WoS) databases. The patterns for the particular set of keywords were broke down with the recuperated outcomes from Scopus database in the language, publication type, year of publication, …

Integration Of Hydrogeophysical Datasets And Empirical Orthogonal Functions For Improved Irrigation Water Management, Catherine E. Finkenbiner, Trenton E. Franz, Justin P. Gibson, Derek M. Heeren, J. D. Luck

Biological Systems Engineering: Papers and Publications

Precision agriculture offers the technologies to manage for infield variability and incorporate variability into irrigation management decisions. The major limitation of this technology often lies in the reconciliation of disparate data sources and the generation of irrigation prescription maps. Here the authors explore the utility of the cosmic-ray neutron probe (CRNP) which measures volumetric soil water content (SWC) in the top ~ 30 cm of the soil profile. The key advantages of CRNP is that the sensor is passive, non-invasive, mobile and soil temperature-invariant, making data collection more compatible with existing farm operations and extending the mapping period. The objectives …

Laboratory And Full Boom-Based Investigation Of Nozzle Setup And Restriction Effects On Flow, Pressure And Spray Pattern Distribution, Shane H. Forney

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Pesticide application is an integral part of crop production and ground-based agricultural boom sprayers are used extensively to apply pesticides to the crop canopy or soil surface across millions of acres in the United States. Efficient application is necessary to minimize costs and limit adverse environmental impacts. Errors in flow rate and system pressure measurements may cause as-applied maps to incorrectly indicate application rates and could negatively affect downstream data processing or analysis. The goals of this study were to provide quantified measurements on the effects of nozzle setup errors on spray pattern uniformity and evaluate how laboratory patternator data …

A Five-Year Performance Review Of Field-Scale, Slow-Release Permanganate Candles With Recommendations For Second-Generation Improvements, Mark Christenson, Ann Kambhu, James Reece, Steve D. Comfort, Laurie Brunner

Nebraska Water Center: Faculty Publications

In 2009, we identified a TCE plume at an abandoned landfill that was located in a low permeable siltyclay aquifer. To treat the TCE, we manufactured slow-release potassium permanganate cylinders (oxidant candles) that had diameters of either 5.1 or 7.6 cm and were 91.4 cm long. In 2010, we compared two methods of candle installation by inserting equal masses of the oxidant candles (7.6-cm vs 5.1-cm dia). The 5.1-cm dia candles were inserted with direct-push rods while the 7.6-cm candles were housed in screens and lowered into 10 permanent wells. Since installation, the 7.6-cm oxidant candles have been refurbished approximately …

Ventilation Rates And Airflow Pathways In Patient Rooms: A Case Study Of Bioaerosol Containment And Removal, Ehsan S. Mousavi, Kevin R. Grosskopf

Durham School of Architectural Engineering and Construction: Faculty Publications

Most studies on the transmission of infectious airborne disease have focused on patient room air changes per hour (ACH) and how ACH provides pathogen dilution and removal. The logical but mostly unproven premise is that greater air change rates reduce the concentration of infectious particles and thus, the probability of airborne disease transmission. Recently, a growing body of research suggests pathways between pathogenic source (patient) and control (exhaust) may be the dominant environmental factor. While increases in airborne disease transmission have been associated with ventilation rates below 2 ACH, comparatively less data are available to quantify the benefits of higher …

Testing The Fuel Efficiency Of Tractors With Continuously Variable And Standard Geared Transmissions, Christopher N. Howard, Michael F. Kocher, Roger M. Hoy, Erin E. Blankenship

Biological Systems Engineering: Papers and Publications

A John Deere 8295R IVT tractor with a continuously variable transmission (CVT) and a John Deere 8295R PowerShift (PST) tractor with a standard geared transmission (GT) were tested for fuel consumption at three different travel speeds with six different load levels applied per speed. The JD 8295R PST tractor was tested both at full throttle (FT) and shifted up two gears and throttled back (SUTB) to achieve the same travel speed as at full throttle. For each travel speed with each transmission mode, fuel consumption was determined to be linearly related to drawbar power. Linear regression analyses were performed, and …

Experimental Investigation Of Hard And Brittle Materials Machining Using Micro Rotary Ultrasonic Machining, Amey V. Patwardhan

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The demand for miniaturized device and components is rapidly increasing in fields of aerospace, energy, optics, electronics and communication, automation and medical. Rotary Ultrasonic Machining (RUM) is capable of machining hard and brittle materials such as advanced ceramics, glass and silicon used in many industries. Rotary Ultrasonic Machining (RUM) is a hybrid machining process in which material is removed by conventional grinding and ultrasonic machining. Micro RUM is a downscaled version of a macro RUM and is similar to micro Ultrasonic Machining (micro USM), where the vibration takes place in work piece instead of tool.

The goal of this thesis …

Development And Validation Of A Model For Granular Material Volume Measurements, Pourya Fasounaki

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Keeping inventory record of packed grains in silos poses challenges since the bulk material’s different segments do not discharge uniformly, leading to formation of random peaks and valleys on the surface. To facilitate obtaining accurate volume measurement of the grains by taking into account this non-linear behavior on the surface, laser or plumb-bob level-sensing devices are employed at different part of the surface to probe the level of material under those regions.

The main goals of this research is to study the behavior of granular material in silo while discharging downward and by doing so, differentiate certain flow patterns formed …

Integration Of A Real Option Of An Environmental Project, Qi Yang

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

This thesis explores a problem of how to evaluate environmental projects under the Carbon Cap-and-Trade Scheme (CCTS) from the perspective of an individual firm. The focus is the integration of a real option approach for project investment timing and financial carbon option approach for carbon credit management. The real option is for a mid or long term decision on when to invest on the environmental project, and the financial option is for a supplementary decision to hedge short-term residue risks. Two uncertainties (the carbon price and carbon credit demand) are considered, and their changes are represented by a lattice of …

Course Portfolio - Discrete Event Simulation, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This course portfolio, written by Dr. Paul Savory, provides an overview of his Discrete Event Simulation course at the University of Nebraska-Lincoln. It offers an overview of the course goals, a summary of the classroom activities for achieving them, and a detailed assessment of student learning. He highlights his introduction of the simul8 programming environment to his students. In addition to exploring his students’ learning, Dr. Savory also explores different approaches for documenting his teaching by including multimedia clips (video and audio), uses graphs, uses color, and incorporates images. The resulting portfolio is one that can be reviewed, shared, and …

Rubric For Project Self-Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow each member of a project team to offer a self-assessment of their own performance on the projects. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Project Report Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to formalize the evaluation or assessment of a project report. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Presentation Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow classmates and myself to offer an evaluation or assessment of a student classroom presentation. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Ruberic For Project Team Member Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow team members for course projects to offer an evaluation or assessment of the fellow members of their team. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Randomly Generating Manufacturing Flow Line Models Using Mathematica, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

To test heuristic algorithms and techniques, researchers need numerous datasets so as to measure effectiveness and improve approaches. This paper discusses using Mathematica, a mathematical programming language, for randomly generating the specifications for manufacturing flow line models. Important issues include determining an arrival rate to a flow line, the number of flow line stations, the number of parallel servers for each production station, and specifying the service time distributions and their associated parameters. The paper concludes with a discussion on generating more general types of simulation models.

Details And Description Of Operations Research, Paul Savory

Industrial and Management Systems Engineering: Reports

The ambiguous term operations research was coined during World War II. A frequent substitute is management science. Operations research is a scientific approach to analyzing problems and making decisions. It uses mathematics and mathematical modeling on computers to forecast the implications of various choices and zero in on the best alternatives. This content paper provides an overview of operations research. It highlights operations research problems, methods for solving problems, different areas of operations research, and example problems.

Pre/Post Assessment Of Abilities, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

One approach to assess if students are learning in a course is to conduct a pre-test, post-test assessment of the course material. By comparing the two results, one can make an assessment of the knowledge learned in the course. For certain types of courses, it can be a challenge in defining an assessment instrument that measure student knowledge. This example is one I have developed for my IMSE 440/840 (Discrete Event Computer Simulation) course. Students are asked rate their ability for key course objectives defined on the course syllabus. I administer it on the first day of the course and …

A Template-Based Data Specification Framework For Modeling Physical Security Systems, Ashu Guru, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Simulation studies often fail to provide any useful results due to its success being highly dependent on the skills of the analyst to understand a system and then correctly identify all the required data parameters and dependent variables. This paper describes a template-based framework to help identify and specify the components and data parameters for developing models of physical security systems. The layered framework consists of fifteen templates built on top of fourteen data primitives representing 119 data parameters. The modeling framework has been programmed as an internet-based web application and is simulation language independent. The usefulness of the framework …

Class Exercise For Assessing Abilities And Providing A Structure For A Course, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I developed this class exercise to assess students abilities and to highlight the range of questions/issues that they will learn in my IMSE 440/840 (Discrete Event Computer Simulation) course. I draw a picture of the case scenario for students and explain the system’s operation to them. I then ask that they complete the questions regarding the system and/or how they would analyze it. Following class, I develop a summary of the range of student answers. At the next class session, I share the range of answers and share what my answers would be and how these questions/topics relate to what …

Using Multi-Stack And Variable-Speed-Drive Systems To Reduce Laboratory Exhaust Fan Energy, Gang Wang, Mingsheng Liu

Durham School of Architectural Engineering and Construction: Faculty Publications

In buildings that contain laboratories, fume hoods are normally used to control contaminant concentrations. Exhaust stacks with a constant exit velocity are required to make sure that dangerous concentrations do not occur in occupied areas near the building or on the roof top. To achieve constant velocity when exhaust flow rates are less than design, makeup air is introduced to the system at the inlet of the exhaust fan. Since laboratory exhaust airflow is often significantly less than the design airflow, exhaust fans consume significantly more energy than is necessary. To reduce exhaust fan energy, techniques involving multiple exhaust stacks …

A Template-Based Conceptual Modeling Infrastructure For Simulation Of Physical Security Systems, Ashu Guru, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Although simulation is one of the most innovative and cost-effective tools for modeling and analyzing a system, simulation studies often fail to provide any useful results. One reason is attributed to the fact that model formulation depends on the skills of the analyst. This paper describes a research to develop a conceptual modeling infrastructure to assist a simulation analyst in specifying components for studying physical security systems. The modeling framework has been programmed as an internet-based web application. Using the application, the successful development and implementation of a physical security simulation model will be aided by a defined scientific methodology …

A Case Study Of Teaching A Quantitative Course Using Archived Streaming Video, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This case study highlights some of the issues and difficulties experienced in teaching a quantitative course using three methods of delivery: in-class to an audience of students, television broadcast over a satellite system to distance students, and archived streaming video accessible by students. The discussion is applicable to administrators and faculty exploring the option of teaching a course using multiple delivery approaches.

A Template-Based Conceptual Modeling Infrastructure For Simulation Of Physical Security Systems, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Although simulation is one of the most innovative and cost-effective tools for modeling and analyzing a system, simulation studies often fail to provide any useful results. One reason is attributed to the fact that model formulation depends on the skills of the analyst. This paper describes a research to develop a conceptual modeling infrastructure to assist a simulation analyst in specifying components for studying physical security systems. The modeling framework has been programmed as an internet-based web application. Using the application, the successful development and implementation of a physical security simulation model will be aided by a defined scientific methodology …

A Simulation Based Experiment For Comparing Amhs Performance In A Semiconductor Fabrication Facility, Gerald Mackulak, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

As the cost and complexity of constructing a semiconductor fabrication facility increases, responsive tools are needed for designing and planning its operations. Discrete-event simulation paired with design of experiments is an effective combination. This article demonstrates how simulation in combination with design of experiments is used to compare the intrabay layout of two automated material handling systems. The difference in stocker robot utilization, number of vehicle moves per hour, and average delivery time for the two intrabay layouts will be compared using a fractional factorial experimental design. The study demonstrates that the distributed storage option is preferable for maximizing manufacturing …

Combining Activity-Based Costing With The Simulation Of A Cellular Manufacturing System, Paul Savory, Robert Williams, Rodney Rassmuseun

Department of Industrial and Management Systems Engineering: Faculty Publications

This paper presents an integrated simulation and activity-based management approach for determining the best sequencing scheme for processing a part family through a manufacturing cell. The integration is illustrated on a loop or U-shaped manufacturing cell and a part family consisting of four part types (A, B, C, and D). Production requirements for the cell demand that part batches be processed one type at a time. For example, all part A’s are processed until weekly demand is met, then part B’s, etc. The objective of this example is to determine the best part sequence (e.g., ABCD, DCBA or CABD). In …

Combining Activity-Based Costing With The Simulation Of A Cellular Manufacturing System, Paul Savory, Robert Williams, Rodney Rassmuseun

Department of Industrial and Management Systems Engineering: Faculty Publications

Discrete-event simulation is one of the most effective techniques for analyzing a manufacturing system. Unfortunately, little attention is given to using simulation models to estimate the economic impact of a proposed system configuration. This paper defines how activity-based costing (ABC) concepts can be incorporated into a discrete-event simulation model. Special emphasis is on demonstrating how decision making can be aided by having the simulation create a detailed “Bill of Activity” describing costs associated with manufacturing a part. The integration of ABC and simulation is illustrated by evaluating the impact of a proposed manufacturing cell configuration. The additional costing information aids …

Guidelines For Using Process Mapping To Aid Improvement Efforts, Paul Savory, John R. Olson

Department of Industrial and Management Systems Engineering: Faculty Publications

Process mapping is an easy-to-visualize method for people to analyze and agree on the most efficient routes for reengineering or improving a process. It aids in determining redundant tasks, uncovering hidden interactions between processes and people, and focusing on the processes that serve customers, improve quality, and generate income. This paper presents guidelines for using process mapping as an improvement tool. It is based on the authors’ experiences in aiding a variety of healthcare, service, and manufacturing companies.

A Web-Based Interface For Storing And Executing Simulation Models, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

The dominance of the Internet in the development of information and communication technology has made Web-based distributed solutions increasingly attractive. Apart from providing other services, the World Wide Web is being looked upon as an environment for hosting modeling and simulation applications. SIMAN is a simulation language that allows users to simulate discrete and continuous systems. In this research, a web-based interface or toolkit has been developed for storing and executing SIMAN simulation models over the Internet. This toolkit consists of a World Wide Web interface to SIMAN and a web-accessible database for storing user models. It provides users an …

A Web-Based Interface For Storing And Executing Simulation Model, Ashu Guru, Paul Savory, Robert Williams

Department of Industrial and Management Systems Engineering: Faculty Publications

The dominance of the Internet in the development ofinformation and communication technology has madeWeb-based distributed solutions increasingly attractive.Apart from providing other services, the World Wide Webis being looked upon as an environment for hostingmodeling and simulation applications. SIMAN is asimulation language that allows users to simulate discreteand continuous systems. In this research, a web-basedinterface or toolkit has been developed for storing andexecuting SIMAN simulation models over the Internet.This toolkit consists of a World Wide Web interface toSIMAN and a web-accessible database for storing usermodels. It provides users an easy-to-use environment fordeveloping text-based simulation models using the SIMANsimulation language. It also …

Introduction To Industrial Engineering: Manufacturing Variability, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

Classroom exercise for IMSE 150 at the University of Nebraska-Lincoln. This goal is to introduce freshman industrial engineering students to various aspects of industrial engineering and being an engineer. This fun and interactive penny manufacturing game highlights the impact of variability, capacity, and overtime.