Open Access. Powered by Scholars. Published by Universities.®

Operations Research, Systems Engineering and Industrial Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 30 of 33

Full-Text Articles in Operations Research, Systems Engineering and Industrial Engineering

Evaluating The Reliability, Coverage, And Added Value Of Crowdsourced Traffic Incident Reports From Waze, Mostafa Amin-Naseri, Pranamesh Chakraborty, Anuj Sharma, Stephen B. Gilbert, Mingyi Hong Dec 2018

Evaluating The Reliability, Coverage, And Added Value Of Crowdsourced Traffic Incident Reports From Waze, Mostafa Amin-Naseri, Pranamesh Chakraborty, Anuj Sharma, Stephen B. Gilbert, Mingyi Hong

Civil, Construction and Environmental Engineering Publications

Traffic managers strive to have the most accurate information on road conditions, normally by using sensors and cameras, to act effectively in response to incidents. The prevalence of crowdsourced traffic information that has become available to traffic managers brings hope and yet raises important questions about the proper strategy for allocating resources to monitoring methods. Although many researchers have indicated the potential value in crowdsourced data, it is crucial to quantitatively explore its validity and coverage as a new source of data. This research studied crowdsourced data from a smartphone navigation application called Waze to identify the characteristics of this ...


Statistical Reliability Of Wind Power Scenarios And Stochastic Unit Commitment Cost, Didem Sari, Sarah M. Ryan Nov 2018

Statistical Reliability Of Wind Power Scenarios And Stochastic Unit Commitment Cost, Didem Sari, Sarah M. Ryan

Industrial and Manufacturing Systems Engineering Publications

Probabilistic wind power scenarios constitute a crucial input for stochastic day-ahead unit commitment in power systems with deep penetration of wind generation. To minimize the cost of implemented solutions, the scenario time series of wind power amounts available should accurately represent the stochastic process for available wind power as it is estimated on the day ahead. The high computational demands of stochastic programming motivate a search for ways to evaluate scenarios without extensively simulating the stochastic unit commitment procedure. The statistical reliability of wind power scenario sets can be assessed by approaches extended from ensemble forecast verification. We examine the ...


Conditions Under Which Adjustability Lowers The Cost Of A Robust Linear Program, Ali Haddad-Sisakht, Sarah M. Ryan Oct 2018

Conditions Under Which Adjustability Lowers The Cost Of A Robust Linear Program, Ali Haddad-Sisakht, Sarah M. Ryan

Industrial and Manufacturing Systems Engineering Publications

The adjustable robust counterpart (ARC) of an uncertain linear program extends the robust counterpart (RC) by allowing some decision variables to adjust to the realizations of some uncertain parameters. The ARC may produce a less conservative and costly solution than the RC does but cases are known in which it does not. While the literature documents some examples of cost savings provided by adjustability (particularly affine adjustability), it is not straightforward to determine in advance whether they will materialize. The affine adjustable robust counterpart, while having a tractable structure, still may be much larger than the original problem. We establish ...


Strategies To Redefine The Problem Exploration Space For Design Innovation, Seda Mckilligan, Samantha L. Creeger Sep 2018

Strategies To Redefine The Problem Exploration Space For Design Innovation, Seda Mckilligan, Samantha L. Creeger

Industrial Design Conference Presentations, Posters and Proceedings

Designers are used to solving problems that are given to them, leading them to focus on creating feasible solutions rather than exploring novel perspectives on the presented problems. Creative innovations in problem understanding may lead directly to more innovation solutions. Although problem exploration has been identified as a key process in design thinking, how designers restructure and reframe the problem is not fully examined. The present work aimed to understand how designers intentionally explore variants of problems on the way to solutions. Through an empirical study industrial design students, we documented a high degree of variation in the problem perspectives ...


Feedback Design Considerations For Intelligent Team Tutoring Systems, Jamiahus Walton, Alec Ostrander, Kaitlyn M. Ouverson, Stephen B. Gilbert, Michael C. Dorneich, Eliot H. Winer, Anne Sinatra Sep 2018

Feedback Design Considerations For Intelligent Team Tutoring Systems, Jamiahus Walton, Alec Ostrander, Kaitlyn M. Ouverson, Stephen B. Gilbert, Michael C. Dorneich, Eliot H. Winer, Anne Sinatra

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

Challenges arise when developing a computer-based Intelligent Team Tutoring System (ITTS) that attempts to deliver feedback to teams as effectively as a human tutor. The purpose of this current work is to outline elements of feedback that should be considered when designing feedback for an ITTS. The authors present the results of a study that consisted of 32 participants grouped into 16 teams of two. Each team conducted a surveillance task where they received individual or team feedback. Feedback content was written using either the bald (direct feedback; no need for interpretation) or off-record (general feedback; interpretation needed) etiquette strategy ...


Developing An Optimized Ui For Traffic Incident Managers, Andrina Helgerson, Jamiahus Walton, Celia Loya, Christopher Kawell, Katherine Atwell, Quinn Monaghan, Lakshay Ahuja, Hesham Galal Hassan, Stephen B. Gilbert, Anuj Sharma Sep 2018

Developing An Optimized Ui For Traffic Incident Managers, Andrina Helgerson, Jamiahus Walton, Celia Loya, Christopher Kawell, Katherine Atwell, Quinn Monaghan, Lakshay Ahuja, Hesham Galal Hassan, Stephen B. Gilbert, Anuj Sharma

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

Traffic Incident Managers (TIMs) coordinate first responders and help resolve traffic-related incidents. Currently, some use over fifteen different software applications with unique functionalities across three monitors to manage incidents, leading to redundant data entry, unnecessary task switching, and delayed responses. 40 hours of TIMs’ screens were recorded during their normal work hours at the Iowa Department of Transportation (DoT). The resulting task analysis from these videos greatly influenced the design of a simplified, web-based, user interface (UI) prototype. The new UI offers a 42.9% reduction in the steps required to manage an incident by combining the functionality of the ...


An Analysis Of Video Games Using The Dimensions Of Human-Agent Interaction, Güliz Tokadli, Kaitlyn M. Ouverson, Chase Meusel, Austin Garcia, Stephen B. Gilbert, Michael C. Dorneich Sep 2018

An Analysis Of Video Games Using The Dimensions Of Human-Agent Interaction, Güliz Tokadli, Kaitlyn M. Ouverson, Chase Meusel, Austin Garcia, Stephen B. Gilbert, Michael C. Dorneich

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

Designers of human-agent interaction techniques may benefit from an analysis of existing video games that include aspects of human-agent teaming. Many popular multi-player video games have been designed to integrate multiple human and computer agents in pursuit of a common objective and can serve as a testbed to explore novel interaction methods in human-agent teams. A guiding framework of human-agent interaction was created to bridge best practices between video game and real-world domains. The framework was used to analyze games on five main dimensions: 1) Levels of Automation, 2) Levels of Interaction, 3) Control Mode, 4) Teaming, and 5) Interaction ...


The Impact Of Scientific Management Principles On Food Hub, Richard T. Stone, Colten Fales, Dean Jose, Thomas M. Schnieders, Caroline Krejci, Zhonglun Wang, Drew Schweiger, Christopher Hernandez Sep 2018

The Impact Of Scientific Management Principles On Food Hub, Richard T. Stone, Colten Fales, Dean Jose, Thomas M. Schnieders, Caroline Krejci, Zhonglun Wang, Drew Schweiger, Christopher Hernandez

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

Food hubs have seen substantial growth in the past few decades but the overall operational efficiency and effectiveness is a concern for the managers of these facilities. The experiment designed consisted of 60 participants divided into four treatment groups that simulated tasks completed at food hubs. The experiment designed was a 2x2 factorial design and each treatment group had five teams with three members. The treatment groups had all combinations of the two independent variables ‘training’ and ‘process improvement’ and the impact these factors made on time to pack (TP), time to stack (TS), number of errors while stacking (ES ...


Vastus And Patellar Protection With Range Of Motion Pad – Advanced Personal Protective Equipment For The Lower Body, Richard T. Stone, Brandon Moeller, Thomas M. Schnieders, Ahmad Mumani Sep 2018

Vastus And Patellar Protection With Range Of Motion Pad – Advanced Personal Protective Equipment For The Lower Body, Richard T. Stone, Brandon Moeller, Thomas M. Schnieders, Ahmad Mumani

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

The standard knee pad is considered the most ineffective personal protective equipment in the American football player’s uniform. This study quantitatively and qualitatively assesses personal protective equipment for the lower body for U.S. football players against the VAPPR Pad (Vastus And Patellar Protection with Range of motion), the next iteration of lower body protection. The study consisted of player surveys, material drop testing, and Performance Drill testing including broad-jump, L-drill, pro-agility, and gait analysis with 138 participants in the initial survey and 25 men in the physical testing. Results of the Performance Drill Testing proved that unpadded players ...


Ergonomic Analysis Of Modern Day Kitchen Knives, Richard T. Stone, Olivia Janusz, Thomas M. Schnieders Sep 2018

Ergonomic Analysis Of Modern Day Kitchen Knives, Richard T. Stone, Olivia Janusz, Thomas M. Schnieders

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

The focus of this study was on how different knife characteristics affect the consumer’s ability to slice vegetables. The aim of this study was to investigate if there is a difference in cutting between a chef knife and a santoku knife, a ceramic knife and a stainless-steel knife, and a sharp and dull knife in terms of muscle activation, body part discomfort, time, and slice performance. The results show for the consumer that knife characteristics do not affect the user’s performance.


Ranking Importance Of Exoskeleton Design Aspects, Thomas M. Schnieders, Richard T. Stone Sep 2018

Ranking Importance Of Exoskeleton Design Aspects, Thomas M. Schnieders, Richard T. Stone

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

The objective of this research project was to determine what a conglomerate of professionals consider as the most important metrics to consider when designing an exoskeleton for training. Over 400 researchers, engineers, and scientists were polled in a ranked order survey covering more than 50 different aspects in engineering design. These aspects were identified from a cogent literature review for consideration. While there are a slew of papers covering the results of exoskeleton designs as posture support mechanisms, rehabilitation mechanisms, tools to assist or replace body functions, and human performance augmentation, few cover what aspects were considered in the engineering ...


Techno-Economic Analysis (Tea) Of Extruded Aquafeeds, Rashid Suleiman, Kurt A. Rosentrater Jul 2018

Techno-Economic Analysis (Tea) Of Extruded Aquafeeds, Rashid Suleiman, Kurt A. Rosentrater

Agricultural and Biosystems Engineering Publications

The worldwide decline and overexploitation of ocean fisheries stocks had provided an incentive for the rapid growth of aquaculture. The aquaculture industry has been recognized as the fastest-growing food production system globally, with a 10% increase in production per year and is one of the most reliable and sustainable growth markets for manufactured feeds. Extrusion technology has been extensively used in the modern aquatic feed manufacturing, due to nutritional, physical properties improvements and cost effectiveness of feeds. Cost related to aquatic feed remains the biggest challenge, especially for small-scale producers. In order to understand costs and potential breakeven points, a ...


Board 106: Enhancing Critical Life-Cycle Decision Making In Complex Engineering Projects In The Context Of Engineering Economy Courses, K. Jo Min, John K. Jackman, Farshad Niayeshpour Jun 2018

Board 106: Enhancing Critical Life-Cycle Decision Making In Complex Engineering Projects In The Context Of Engineering Economy Courses, K. Jo Min, John K. Jackman, Farshad Niayeshpour

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

Complex engineering projects (CEPs) such as electric transmission networks and transportation infrastructure are becoming increasingly important to the public in general and even more so to engineers. These projects are large-scale in terms of money and time and contain significant uncertainties over their life-cycle, with fluctuations in input and output costs. Due to these uncertainties, there are conditional opportunities (e.g., on prices) to make critical decisions such as investment in construction of power generation facilities or decommissioning of such facilities. Such decisions constitute strategic flexibilities or "real options" because the decision maker can alter the course of an investment ...


Evaluating Human–Automation Etiquette Strategies To Mitigate User Frustration And Improve Learning In Affect-Aware Tutoring, Euijung Yang, Michael C. Dorneich May 2018

Evaluating Human–Automation Etiquette Strategies To Mitigate User Frustration And Improve Learning In Affect-Aware Tutoring, Euijung Yang, Michael C. Dorneich

Industrial and Manufacturing Systems Engineering Publications

Human–automation etiquette applies human–human etiquette conventions to human–computer interaction (HCI). The research described in this paper investigates how to mitigate user frustration and support student learning through changes in the style in which a computer tutor interacts with a learner. Frustration can significantly impact the quality of learning in tutoring. This study examined an approach to mitigate frustration through the use of different etiquette strategies to change the amount of imposition feedback placed on the learner. An experiment was conducted to explore how varying the interaction style of system feedback impacted aspects of the learning process. System ...


Solid-State Processing Approach To Enhance The Mechanical Properties Of Polypropylene, Sharon Lau, Srikanthan Ramesh, Iris V. Rivero, Lashanda Korley May 2018

Solid-State Processing Approach To Enhance The Mechanical Properties Of Polypropylene, Sharon Lau, Srikanthan Ramesh, Iris V. Rivero, Lashanda Korley

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

Agenda: Background; Research Problem; Methodology; Results and Discussion; Conclusions.


A Multi-Stage Stochastic Programming For Lot-Sizing And Scheduling Under Demand Uncertainty, Zhengyang Hu, Guiping Hu May 2018

A Multi-Stage Stochastic Programming For Lot-Sizing And Scheduling Under Demand Uncertainty, Zhengyang Hu, Guiping Hu

Industrial and Manufacturing Systems Engineering Publications

A stochastic lot-sizing and scheduling problem with demand uncertainty is studied in this paper. Lot-sizing determines the batch size for each product and scheduling decides the sequence of production. A multi-stage stochastic programming model is developed to minimize overall system costs including production cost, setup cost, inventory cost and backlog cost. We aim to find the optimal production sequence and resource allocation decisions. Demand uncertainty is represented by scenario trees using moment matching technique. Scenario reduction is used to select scenarios with the best representation of original set. A case study based on a manufacturing company has been conducted to ...


Using Workers’ Compensation Claims Data To Characterize Occupational Injuries In The Biofuels Industry, Sai K. Ramaswamy, Gretchen A. Mosher Mar 2018

Using Workers’ Compensation Claims Data To Characterize Occupational Injuries In The Biofuels Industry, Sai K. Ramaswamy, Gretchen A. Mosher

Agricultural and Biosystems Engineering Publications

Biofuels production is a fast growing and emerging industry. Occupational injuries are a serious problem due to their human, financial and social costs, yet little research has been published on injuries in the biofuels industry. Learning from past injuries are essential for preventing future occurrences, but the lack of injury information hinders this effort in the biofuels industry. The present study addresses this knowledge gap by utilizing data from over 900 workers’ compensation claims reported from 2008 to 2016 by ethanol and biodiesel facilities in the U.S. to characterize injury costs and severity. The total amount paid for each ...


A Single Dose Polyanhydride-Based Vaccine Platform Promotes And Maintains Anti-Gnrh Antibody Titers, Robert G. Schaut, Matt T. Brewer, Jesse M. Hostetter, Kriscelle Mendoza, Julia E. Vela-Ramirez, Sean M. Kelly, John K. Jackman, Giuseppe Dell’Anna, Joan M. Howard, Balaji Narasimhan, Wen Zhou, Douglas E. Jones Feb 2018

A Single Dose Polyanhydride-Based Vaccine Platform Promotes And Maintains Anti-Gnrh Antibody Titers, Robert G. Schaut, Matt T. Brewer, Jesse M. Hostetter, Kriscelle Mendoza, Julia E. Vela-Ramirez, Sean M. Kelly, John K. Jackman, Giuseppe Dell’Anna, Joan M. Howard, Balaji Narasimhan, Wen Zhou, Douglas E. Jones

Veterinary Pathology Publications and Papers

Traditionally, vaccination strategies require an initial priming vaccination followed by an antigen boost to generate adequate immunity. Here we describe vaccination against a self-peptide for reproductive sterilization utilizing a three-stage vaccine platform consisting of gonadotropin releasing hormone multiple antigenic peptide (GnRH-MAP) as a soluble injection coupled with subcutaneous administration of polyanhydride-immobilized GnRH-MAP and a cyto-exclusive implant containing GnRH-MAP dendrimer-loaded polyanhydride. This strategy generated and maintained cell-mediated and humoral immunity for up to 41 weeks after a single vaccination in mice with enhanced antibody avidity over time. All intact implants had a grossly visible tissue interface with neovascularization and lymphocytic aggregates ...


Transportation Safety Performance Of Us Bus Transit Agencies And Population Density: A Cross-Sectional Analysis (2008-2014), Ilker Karaca, Peter T. Savolainen Jan 2018

Transportation Safety Performance Of Us Bus Transit Agencies And Population Density: A Cross-Sectional Analysis (2008-2014), Ilker Karaca, Peter T. Savolainen

Finance Conference Papers, Posters, and Proceedings

The paper examines the transportation safety performance of transit agencies providing public bus service in the US by using data from the National Transit Database (NTD)

Uses NTD data for a seven-year period from 2008 to 2014 • 3,853 observations for 651 public transportation agencies in 50 states

Seven types of bus transit fatalities and injuries (including passengers, operators, pedestrians, bicyclists)

Main explanatory variable: urban density obtained from the US Census figures

Other explanatory variables: total agency revenue miles, unlinked passenger trips, agency fleet size, and urban population


A Design Framework For Additive Manufacturing Through The Synergistic Use Of Axiomatic Design Theory And Triz, Sarath C. Renjith, Gül E. Okudan Kremer, Kijung Park Jan 2018

A Design Framework For Additive Manufacturing Through The Synergistic Use Of Axiomatic Design Theory And Triz, Sarath C. Renjith, Gül E. Okudan Kremer, Kijung Park

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

Additive manufacturing has emerged as an integral part of modern manufacturing because of its unique capabilities for rapid prototyping and the design flexibility. In order to take full advantage of additive manufacturing, Design for Additive Manufacturing (DfAM) has risen to provide design frameworks, methodologies, and a set of guidelines for effective product designs under additive manufacturing. However, the existing DfAM methods have limitations in that most methods rely on either too general or too specific design requirements and parameters for additive manufacturing; an effective design framework that can consider the capabilities and constraints of additive manufacturing at an early design ...


The Affordances Of Process-Tracing Technologies For Supporting L2 Writing Instruction, Jim R. Ranalli, Hui-Hsien Feng, Evgeny Chukharev-Khudilaynen Jan 2018

The Affordances Of Process-Tracing Technologies For Supporting L2 Writing Instruction, Jim R. Ranalli, Hui-Hsien Feng, Evgeny Chukharev-Khudilaynen

English Publications

The research literature on L2 writing processes contains a multitude of insights that could inform writing instruction, but writing teachers are constrained in their capacity to make use of these insights insofar as they lack detailed information about how their students’ actually engage in the processes of writing. At the same time, writing-process researchers have been using powerful technologies to trace writers’ process engagement—namely, keystroke-logging and eye-tracking—that are potentially applicable in educational settings. In this article, we describe a pilot effort to integrate these technologies into L2 writing instruction with college-level ESL students. In addition to illustrating three ...


Application Of Bayesian Belief Network For Agile Kanban Backlog Estimation, Eric Weflen, Kevin Korniejczuk, Sharon Lau, Steven Kryk, Cameron A. Mackenzie, Iris V. Rivero Jan 2018

Application Of Bayesian Belief Network For Agile Kanban Backlog Estimation, Eric Weflen, Kevin Korniejczuk, Sharon Lau, Steven Kryk, Cameron A. Mackenzie, Iris V. Rivero

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

This paper presents an approach based on influence diagrams for reducing uncertainty in Agile Kanban backlog feature completion time. Agile project management techniques, including SCRUM and Kanban, are prevalent in software development and spreading to other product development fields. A key artifact of Agile is the product backlog, containing work which needs to be completed by the development team. Internal and external stakeholders often require projections for completion of backlogged requests or features. Current estimation techniques such as duration assignments through planning poker and the use of story points to calculate velocity require persistent team input, while task counting has ...


A Sustainable Additive Approach For The Achievement Of Tunable Porosity, Sharon Lau, Taylor Yeazel, Ana Miller, Nathan Pfister, Iris V. Rivero Jan 2018

A Sustainable Additive Approach For The Achievement Of Tunable Porosity, Sharon Lau, Taylor Yeazel, Ana Miller, Nathan Pfister, Iris V. Rivero

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

This study aims to design a green additive approach for the fabrication of controlled porosity on hydrogels. Although hydrogels have been of common use in tissue engineering, the generation of controllable porosity remains an issue due to their swelling and degradation properties. Hydrogels in this study were fabricated by physical cross-linking and the porosity was generated by casting the solution in a 3D printed mold prior to physical cross-linking. This approach eliminates the use of chemical cross-linking compounds which are often toxic and not environmentally friendly. Polyvinyl alcohol was selected to validate this technique due to its biocompatibility and adequate ...


An Investigation On Selected Factors That Cause Variability In Additive Manufacturing, Anusha Velineni, Elif Elçin Günay, Kijung Park, Gül E. Okudan Kremer, Thomas M. Schnieders, Richard T. Stone Jan 2018

An Investigation On Selected Factors That Cause Variability In Additive Manufacturing, Anusha Velineni, Elif Elçin Günay, Kijung Park, Gül E. Okudan Kremer, Thomas M. Schnieders, Richard T. Stone

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

Additive manufacturing (AM) brings significant freedom in design, yet it can get hard to produce the same part at identical dimensional tolerances; this is also known as the reproducibility problem. Reproducibility, the ability to produce the same part under similar conditions, is one of the major challenges in AM as reproducibility plays an important role in the replacement of worn-out or damaged parts in an assembly. The objective of this paper is to identify the impacts of two most common factors (i.e., layer thickness and printing speed) on the dimensional accuracy of additively manufactured parts through a designed experiment ...


Determination Of Bus Station Locations Under Emission And Social Cost Constraints, Atousa Zarindast, Elif Elçin Günay, Kijung Park, Gül E. Okudan Kremer Jan 2018

Determination Of Bus Station Locations Under Emission And Social Cost Constraints, Atousa Zarindast, Elif Elçin Günay, Kijung Park, Gül E. Okudan Kremer

Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters

This study proposes a two-stage stochastic programming model to determine an optimal set of bus stations that minimizes operational, environmental, and social costs under uncertain weather conditions and customer perceptions on sustainability. The first stage of the proposed model focuses on the derivation of a set of bus stations under uncertain demand and weather conditions. Then, the second stage determines an optimal vehicle capacity (i.e., bus size) to minimize the impact of vehicle shortages. In the proposed model, different customer perceptions on sustainability are conceptualized through a range of dissatisfaction levels. Weather conditions are considered as causing higher dissatisfaction ...


Moving Toward The Automation Of The Systematic Review Process: A Summary Of Discussions At The Second Meeting Of International Collaboration For The Automation Of Systematic Reviews (Icasr), Annette M. O'Connor, Guy Tsafnat, Stephen B. Gilbert, Kristina A. Thayer, Mary S. Wolfe Jan 2018

Moving Toward The Automation Of The Systematic Review Process: A Summary Of Discussions At The Second Meeting Of International Collaboration For The Automation Of Systematic Reviews (Icasr), Annette M. O'Connor, Guy Tsafnat, Stephen B. Gilbert, Kristina A. Thayer, Mary S. Wolfe

Veterinary Diagnostic and Production Animal Medicine Conference Proceedings and Presentations

The second meeting of the International Collaboration for Automation of Systematic Reviews (ICASR) was held 3–4 October 2016 in Philadelphia, Pennsylvania, USA. ICASR is an interdisciplinary group whose aim is to maximize the use of technology for conducting rapid, accurate, and efficient systematic reviews of scientific evidence. Having automated tools for systematic review should enable more transparent and timely review, maximizing the potential for identifying and translating research findings to practical application. The meeting brought together multiple stakeholder groups including users of summarized research, methodologists who explore production processes and systematic review quality, and technologists such as software developers ...


Three New Approaches To Genomic Selection, Lizhi Wang, Guodong Zhu, Will Johnson, Mriga Kher Jan 2018

Three New Approaches To Genomic Selection, Lizhi Wang, Guodong Zhu, Will Johnson, Mriga Kher

Industrial and Manufacturing Systems Engineering Publications

Conventional genomic selection approaches use breeding values to evaluate individual plants or animals and to make selection decisions. Multiple variants of breeding values and selection approaches have been proposed, but they suffer two major limitations. First, selection decisions are not responsive to changes in time and resource availability. Second, selection decisions are not coordinated with related decisions such as mating and resource allocation. We present three new genomic selection approaches that attempt to address these two limitations, which were designed by engineering students in a class project at Iowa State University. Compared with previous approaches using the same data set ...


Closed-Loop Supply Chain Network Design With Multiple Transportation Modes Under Stochastic Demand And Uncertain Carbon Tax, Ali Haddadsisakht, Sarah M. Ryan Jan 2018

Closed-Loop Supply Chain Network Design With Multiple Transportation Modes Under Stochastic Demand And Uncertain Carbon Tax, Ali Haddadsisakht, Sarah M. Ryan

Industrial and Manufacturing Systems Engineering Publications

We optimize the design of a closed-loop supply chain network that encompasses flows in both forward and reverse directions and is subject to uncertainty in demands for both new and returned products. The model also accommodates a carbon tax with tax rate uncertainty. The proposed model is a three-stage hybrid robust/stochastic program that combines probabilistic scenarios for the demands and return quantities with uncertainty sets for the carbon tax rates. The first stage decisions are facility investments, the second stage concerns the plan for distributing new and collecting returned products after realization of demands and returns, and the numbers ...


A Regional Information-Based Multi-Attribute And Multi-Objective Decision-Making Approach For Sustainable Supplier Selection And Order Allocation, Kijung Park, Gül E. Okudan Kremer, Junfeng Ma Jan 2018

A Regional Information-Based Multi-Attribute And Multi-Objective Decision-Making Approach For Sustainable Supplier Selection And Order Allocation, Kijung Park, Gül E. Okudan Kremer, Junfeng Ma

Industrial and Manufacturing Systems Engineering Publications

Although extant studies proposed various models and frameworks for sustainable supplier selection problems, they paid limited attention to the incorporation of regional economic, social, and environmental factors simultaneously for global supply chain design due to the difficulty in reflecting varies dimensions of the global business environment and their associated risk in a decision model. Existing supplier selection models also tend to focus on the formulation of a simplified supply chain structure rather than considering more realistic supply chain operations under multiple sourcing and product designs. To facilitate the complex decision-making process of global supplier selection problems, this study proposes an ...


Five Lenses On Team Tutor Challenges: A Multidisciplinary Approach, Stephen B. Gilbert, Michael Dorneich, Jamiahus Walton, Eliot Winer Jan 2018

Five Lenses On Team Tutor Challenges: A Multidisciplinary Approach, Stephen B. Gilbert, Michael Dorneich, Jamiahus Walton, Eliot Winer

Industrial and Manufacturing Systems Engineering Publications

This chapter describes five disciplinary domains of research or lenses that contribute to the design of a team tutor. We focus on four significant challenges in developing Intelligent Team Tutoring Systems (ITTSs), and explore how the five lenses can offer guidance for these challenges. The four challenges arise in the design of team member interactions, performance metrics and skill development, feedback, and tutor authoring. The five lenses or research domains that we apply to these four challenges are Tutor Engineering, Learning Sciences, Science of Teams, Data Analyst, and Human–Computer Interaction. This matrix of applications from each perspective offers a ...