Nanoscience and Nanotechnology Commons^™

Thermal Convection Of Non-Fourier Fluids, Rahim Mohammadhasani Khorasany

Electronic Thesis and Dissertation Repository

The natural convection of non-Fourier fluids of the dual-phase-lagging (DPL) type is examined. These fluids possess a relaxation time and a retardation time, reflecting the delay in the response of the heat flux and the temperature gradient with respect to one another. DPL fluids span a wide range of applications, including low-temperature liquids, fluids subjected to fast heat transfer processes, and nanofluids (NFs), for which both the relaxation and retardation times are expressed in terms of nanoparticle concentration and solution properties. Both stationary and oscillatory convection become equally probable as the relaxation time increases. A nonlinear spectral approach is also …

Size-Dependent Electroelastic Properties Of Piezoelectric Nanoplates, Zhengrong Zhang

Electronic Thesis and Dissertation Repository

With the development of nanotechnology, piezoelectric nanostructures have attracted a surge of interests in research communities for the potential applications as transistors, sensors, actuators, resonators and energy harvesters in nanoelectromechanical systems (NEMS) due to their high electromechanical coupling and unique features at the nano-scale. Piezoelectric nanomaterials have been characterized to possess size-dependent electromechanical coupling properties from both experimental and theoretical perspectives. Therefore it is of great importance to investigate the physical mechanisms of these distinct nano-scale structure features in order to fulfill the design and application of those piezoelectricity-based nanodevices.

Due to large surface to volume ratio and manifest strain …

Optical Resonators And Fiber Tapers As Transducers For Detection Of Nanoparticles And Bio-Molecules, Huzeyfe Yilmaz

McKelvey School of Engineering Theses & Dissertations

In recent years, detection of biological interactions on single molecule level has aspired many researchers to investigate several optical, chemical, electrical and mechanical sensing tools. Among these tools, toroidal optical resonators lead the way in detection of the smallest particle/molecule with the real time measurements. In this work, bio-sensing capabilities of toroidal optical resonators are investigated. Bio-sensing is realized via measuring the analyte-antigen interaction while the antigen is immobilized through a novel functionalization method.

Not long ago, detection of single nanoparticles using optical resonators has been accomplished however the need for cost-effective and practical transducers demands simpler tools. A tapered …

Surfactant Assisted Dispersion Of Single-Walled Carbon Nanotubes In Polyvinylpyrrolidone Solutions, Tennison Yu

Electronic Thesis and Dissertation Repository

Obtaining stable aqueous dispersions is one of the main challenges hindering a widespread and effective use of single-walled carbon nanotubes (SWNT) in many applications. Although it has been recognized that their versatility makes them an extremely attractive material, the unique molecular structure that gives SWNTs their unmatched electronic, mechanical, and thermal properties is also responsible for strong van der Waals interactions. This, combined with extremely high aspect ratios and flexibility, causes SWNTs to adhere strongly into tightly bundled ropes. In these bundles, SWNTs are not as useful as their linearized unbundled equivalents. Thus, in order to take advantage of their …

Optical Properties Of Nanostructured Dielectric Coatings, Brandon Giatti

Dissertations and Theses

Solar cells have extrinsic losses from a variety of sources which can be minimized by optimization of the design and fabrication processes. Reflection from the front surface is one such loss mechanism and has been managed in the past with the usage of planar antireflection coatings. While effective, these coatings are each limited to a single wavelength of light and do not account for varying incident angles of the incoming light source. Three-dimensional nanostructures have shown the ability to inhibit reflection for differing wavelengths and angles of incidence. Nanocones were modeled and show a broadband, multi-angled reflectance decrease due to …

Atomistic Simulation And Virtual Diffraction Characterization Of Alumina Interfaces: Evaluating Structure And Stability For Predictive Physical Vapor Deposition Models, Shawn Patrick Coleman

Graduate Theses and Dissertations

The objectives of this work are to investigate the structure and energetic stability of different alumina (Al₂O₃) phases using atomistic simulation and virtual diffraction characterization. To meet these objectives, this research performs molecular statics and molecular dynamics simulations employing the reactive force-field (ReaxFF) potential to model bulk, interface, and surface structures in the θ-, γ-, κ-, and α-Al₂O₃ system. Simulations throughout this study are characterized using a new virtual diffraction algorithm, developed and implemented for this work, that creates both selected area electron diffraction (SAED) and x-ray diffraction (XRD) line profiles without assuming …

Quantum Tuning Of Plasmons In Ultrathin Metal Films, Ao Teng

Doctoral Dissertations

The surface plasmon is a coherent charge density oscillation localized at a metal surface. It can couple with light and the resulting plasmon-polariton hybrid mode is confined to volumes that are much smaller than the classical diffraction limit of light. Nano-plasmonics is a rapidly evolving field where light manipulation at the nanoscale may lead to novel applications. However, as the size of plasmonic devices approaches the quantum-size regime, the macroscopic picture of plasmon may no longer be valid. To elucidate the influence of the discretization of the single particle spectrum on the collective plasmon response, we performed a systematic study …

A Biophysical Understanding Of The Applications And Implications Of Nanomaterials, Nicholas Geitner

All Dissertations

The last few decades have seen an explosion in the study and application of nanomaterials that continues to grow at a dizzying pace. Despite exciting applications in nano-enabled electronics, materials, medicine, and environmental remediation, an understanding of the interactions of these materials with natural materials and systems and the resulting implications lags severely behind. The purpose of this Dissertation is to illuminate these interactions as well as develop novel environmental applications from a biophysical perspective. Following an introduction and literature review in Chapter 1, Chapters 2-4 will explore the application of dendritic polymers as novel and biocompatible oil dispersants for …

Self-Assembly Of Gold Nanosphere Dimers By Inertial Force, George Andrew Christopher Sakhel

Graduate Theses and Dissertations

The morphology and composition of a nanoparticle (NP) play a critical role in determining the NP's properties and function. To date, researchers have created a myriad of NPs of different shapes, sizes, and compositions with interesting attributes and applications ushering a revolution in medicine, electronics, microscopy, and microfluidics.

In this study, gold (Au) nanosphere dimers (NSDs) have been synthesized through a novel self-assembly method. These particles were created from Au NPs mono-dispersed in aqueous solution via a process of centrifugation and capping agent replacement. Au NSDs consist of two Au NPs combined together with minimal gaps between them. Optical spectral …

Nanoscale Manipulation Of Pristine And Functionalized Freestanding Graphene Using Scanning Tunneling Microscopy, Matthew Ackerman

Graduate Theses and Dissertations

Over the past ten years the 2D material graphene has attracted an enourmous amount of attention from researchers from across diciplines and all over the world. Many of its outstanding electronic properties are present only when it is not interacting with a substrate but is instead freestanding. In this work I demonstrate that pristine and functionalized freestanding graphene can be imaged using a scanning tunneling microscope (STM) and that imaging a flexible 2D surface is fundamentally different from imaging a bulk material due to the attraction between the STM tip and the sample. This attraction can be used to manipulate …

Nanofabrication Of Metallic Nanostructures And Integration With Light Detection Devices, Liang Huang

Graduate Theses and Dissertations

Metallic nanostructures have been investigated with various applications especially for integration with light detection devices. The incident light can be manipulated by those nanostructures to enhance light absorption therefor improve device performance. However, previous studies focused on optical design. The electrical properties of these integrated light detection devices have not been fully considered. The photon generated carriers transport and collection are critical for light detection devices as well. An optimized device platform considering from both the optical and electrical aspects to fully utilize these nanostructures is highly desired for future light detection devices.

This dissertation targeted on three objectives, beginning …

Effects Of Nanoholes Grown By Molecular Beam Droplet Epitaxy On Electrical Properties Of Two Dimensional Electron Gas, Yusuke Hirono

Graduate Theses and Dissertations

The effects of nanoholes, grown by molecular beam droplet epitaxy, on the electrical properties of quantum well (QW) heterostructures are reported. To investigate how the depth of nanoholes affect the electrical properties of the QW heterostructures, the growth conditions for nanoholes were optimized with respect to their depth and density. Using the results of the optimization of the nanohole growth, three InGaAs pseudomorphic quantum wells with nanoholes were investigated with varied depth and a constant density. A QW heterostructure without nanoholes was grown as a reference structure. For all the samples, temperature dependent Hall effect measurements, noise studies as a …

Interfacial Interactions Between Carbon Nanoparticles And Conjugated Polymers, Yanqi Luo

Master's Theses

Conjugated polymer based electronics, a type of flexible electronic devices, can be produced from solution by traditional printing and coating processes in a roll-to-roll format such as papers and graphic films. This shows great promise for the emerging energy generation and conversion. The device performance of polymer electronics is largely dependent of crystalline structures and morphology of photoactive layers. However, the solution crystallization kinetics of conjugated polymers in the presence of electron acceptor nanoparticles has not been fully understood yet. In this study, solution crystallization kinetics of poly (3-hexylthiophene) in the presence of carbon nanotubes and graphene oxide has been …

Characterizing Nanoparticle Size By Dynamic Light Scattering Technique (Dls), Marzia Zaman

Graduate Theses and Dissertations

The Dynamic Light Scattering Technique was used to determine the size, shape and diffusion coefficient of nanoparticle. The intensity auto correlation functions of light scattered by particles in a solution were measured by using a photomultiplier tube and analyzed to get the relaxation rates for decay of intensity correlations, which correspond to the diffusion constants pertaining to the motion of the particle. In the case of nanorods there are two types of motion - translational and rotational. By dis-entangling the relaxation rates, corresponding to these two types of motion, the shape and size of nanoparticle could be characterized. These experiments, …

Transport Properties Of Nano-Silica Contained Self-Consolidating Concrete, Borhan Moradi

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this research study, transport properties of various self-consolidating concretes (SCCs) containing nano-particles (SiO2) were investigated. Nano-silica replaced a portion of the cementitious materials at different replacement levels ranging from 1.5 to 7.5% by weight. For the purpose of this investigation, flow, bulk, and transport properties of SCCs were studied. The investigated transport properties were absorption, water penetration, rapid chloride permeability, capillary absorption, rapid migration, and chloride diffusion. Transport properties of nano-silica SCCs were also compared to those of equivalent silica fume (micro silica) contained concretes, as well as those of control mixture (concrete without nano or micro silica).

Test …

Optical Direct-Write Nanolithography Based On Self-Assembled Resist, Meghana Akella

Open Access Theses

Holographic display is being developed for next generation mobile phones. However, manufacturing of miniature gratings for the holographic projectors cost a few thousand dollars today, not making the concept practical for commercial purposes. In this thesis, we discuss the feasibility of self-assembled nanoparticles to manufacture holographic gratings cost-effectively and at the nanoscale. Using our approach, the gratings can be manufactured at the scale of 20nm and the cost per chip is expected to cost a few dollars.^ In this thesis, a hydrophobic SAM was used to modify the surface of silicon. Direct-write UV laser lithography was used for photothermal patterning …

Nickel Aluminum Shape Memory Alloys Via Molecular Dynamics, Keith Ryan Morrison

Open Access Theses

Shape memory materials are an important class of active materials with a wide range of applications in the aerospace, biomedical, and automobile industries. These materials exhibit the two unique properties of shape memory and superelasticity. Shape memory is the ability to recover its original shape by applying heat after undergoing large deformations. Superelasticity is the ability to undergo large, reversible deformations (up to 10%) that revert back when the load is removed. These special properties originate from a reversible, diffusionless solid-solid phase transformation that occurs between a high temperature austenite phase and a low temperature martensite phase. The development of …

Synthesis And Characterization Of Crystalline Iron Nanoparticles From Zerovalent Iron Sandwich Complexes, Anh Tue Nguyen

Open Access Theses

In this project we present a systematic study on the synthesis of crystalline iron nanocubes by thermal decomposition of an iron sandwich complex, ( π-C₅H₅)Fe⁰(π-C ₆H₇), in the presence of oleylamine and oleylamine.HCl as surfactants and n-decane as a solvent. The presence of oleylamine.HCl is essential for the reproducible formation of crystalline iron cores.^ Reaction parameters such as temperature, surfactant concentration, effect of counterion, and organoiron reagent structure were investigated in order to obtain iron nanoparticles with uniform size and shape. The nanoparticles, which were characterized by …

Thermoelectric Elisa For Quantification Of 8ohdg In A Microfluidic Device, Gergana Nestorova

Doctoral Dissertations

This research demonstrates the feasibility of a novel method for performing thermoelectric enzyme-linked immunosorbent assay (ELISA) in a microfluidic device. The feasibility of the thermoelectric ELISA is demonstrated by measuring the concentration of 8-hydroxy 2-deoxyguanosine (8OHdG) in urine samples from amyloid precursor protein (APP) transgenic mice. The detection method is based on formation of a complex between 8OHdG and anti-8OHdG capture antibody conjugated to biotin. The complex is immobilized over the measuring junctions of a thermopile via biotin streptavidin interaction. The concentration of the analyte is determined by using enzyme linked secondary IgG antibody specific to the primary one. The …

Micro And Nano Technology Platforms: From Cell Viability Monitoring To Fet Based Biosensing, Pushparaj D. Pathak

Doctoral Dissertations

Nanotechnology is a multidisciplinary field that combines science and engineering to design, synthesize, characterize and explore applications for materials and devices whose smallest functional organization in at least one dimension is on the nanometer scale. Nanotechnology is undergoing an explosive development and the extent of potential application is vast and widely diverse. In the field of human health care, nanotechnology is helping to develop novel materials and structures, which have made it possible to miniaturize many of the tools used in conventional assays. Smart biochips constructed out of these novel materials and structures are now capable of performing limited in …

Nanostructured Aluminum Oxide (Nao): Enhanced Fluorescence Imaging And Sensing, Xiang Li

Doctoral Dissertations

A new fluorescence enhancement technical platform based on nanostructured aluminum oxide (NAO) has been discovered. Experiments reveal that this new platform can enhance the fluorescence signals up to two or three orders of magnitude compared to a traditional glass substrate platform. In order to realize a large-scale arrayed fluorescence biosensing platform for high throughput applications, a rapid and cost-effective process has been developed to fabricate the micropatterned NAO of a variety of shapes. An optical characterization technology, by introducing UV light irradiance, has been found for the first time to determine if the NAO has been formed from Al and …

Hybrid Nanomaterial And Its Applications: Ir Sensing And Energy Harvesting, Yi-Hsuan Tseng

Doctoral Dissertations

In this dissertation, a hybrid nanomaterial, single-wall carbon nanotubes-copper sulfide nanoparticles (SWNTs-CuS NPs), was synthesized and its properties were analyzed. Due to its unique optical and thermal properties, the hybrid nanomaterial exhibited great potential for infrared (IR) sensing and energy harvesting.

The hybrid nanomaterial was synthesized with the non-covalent bond technique to functionalize the surface of the SWNTs and bind the CuS nanoparticles on the surface of the SWNTs. For testing and analyzing the hybrid nanomaterial, SWNTs-CuS nanoparticles were formed as a thin film structure using the vacuum filtration method. Two conductive wires were bound on the ends of the …

Dc And Rf Characterization Of High Frequency Ald Enhanced Nanostructured Metal-Insulator-Metal Diodes, Olawale Adebimpe Ajayi

USF Tampa Graduate Theses and Dissertations

Metal-Insulator-Metal (MIM), Metal-Insulator-Insulator-Metal (MIIM), and Metal-Insulator-Insulator-Insulator-Metal (MIIIM) quantum tunneling diodes have been designed, fabricated, and characterized. The key interest of this work was to develop tunneling diodes capable of operating and detecting THz radiation up to 30THz, which is well beyond the operation ranges of other semiconductor-based diodes.

Al2O3, HfO2 and TiO2 metal oxides were employed for studying the behavior of metal-insulator-metal (MIM) and metal-insulator-insulator-metal (MIIM) quantum tunneling diodes. Specifically, ultra-thin films of these oxides with varied thicknesses were deposited by atomic layer deposition (ALD) as the tunneling junction material that is sandwiched between platinum (Pt) and titanium (Ti) electrodes, …

Plasmonic Optical Sensors: Performance Analysis And Engineering Towards Biosensing, Peipei Jia

Electronic Thesis and Dissertation Repository

Surface plasmon resonance (SPR) sensing for quantitative analysis of chemical reactions and biological interactions has become one of the most promising applications of plasmonics. This thesis focuses on performance analysis for plasmonic sensors and implementation of plamonic optical sensors with novel nanofabrication techniques.

A universal performance analysis model is established for general two-dimensional plasmonic sensors. This model is based on the fundamental facts of surface plasmon theory. The sensitivity only depends on excitation light wavelength as well as dielectric properties of metal and dielectrics. The expression involves no structure-specified parameters, which validates this formula in broad cases of periodic, quasiperiodic …

Insights Into The Epitaxial Relationships Between One-Dimensional Nanomaterials And Metal Catalyst Surfaces Using Density Functional Theory Calculations, Debosruti Dutta

USF Tampa Graduate Theses and Dissertations

This dissertation involves the study of epitaxial behavior of one-dimensional nanomaterials like single-walled carbon nanotubes and Indium Arsenide nanowires grown on metallic catalyst surfaces. It has been previously observed in our novel microplasma based CVD growth of SWCNTs on Ni-Fe bimetallic nanoparticles that changes in the metal catalyst composition was accompanied by variations in the average metal-metal bond lengths of the nanoparticle and that in turn, affected nanotube chirality distributions. In this dissertation, we have developed a very simplistic model of the metal catalyst in order to explain the nanotube growth of specific nanotube chiralities on various Ni-Fe catalyst surfaces. …

Metal Nanoparticles Immobilized On Basic Supports As Catalysts For Hydrogenation And Dehydrogenation Reactions Of Relevance To Cleaner Fossil Fuels And Alternative Sources Of Energy, Reena Rahi

Dissertations, Theses, and Capstone Projects

We developed a series of catalysts, composed of metal nanoparticles immobilized on basic supports for the hydrogenation of heteroaromatics of relevance to cleaner fossil fuels and biodiesel, and for the dehydrogenation of heteroaromatics of relevance to hydrogen storage in organic liquids. Our catalyst design involves nanostructured catalysts composed of metal particles immobilized on basic supports capable of ionic mechanism that may avoid catalyst poisoning and enhance catalytic activity.

We prepared a new catalyst composed of Pd nanoparticles immobilized on MgO by NaBH4 reduction of Na2PdCl4 in methanol in the presence of the support. TEM measurements revealed well-dispersed 1.7 nm Pd …

Developent Of A Phospholipid Encapsulation Process For Quantum Dots To Be Used In Biologic Applications, Logan Grimes

Master's Theses

The American Cancer Society predicts that 1,665,540 people will be diagnosed with cancer, and 585,720 people will die from cancer in 2014. One of the most common types of cancer in the United States is skin cancer. Melanoma alone is predicted to account for 10,000 of the cancer related deaths in 2014. As a highly mobile and aggressive form of cancer, melanoma is difficult to fight once it has metastasized through the body. Early detection in such varieties of cancer is critical in improving survival rates in afflicted patients. Present methods of detection rely on visual examination of suspicious regions …

Electroplating Of Nanoengineered Polymer Substrate, Brandon Voelker

Masters Theses

The development of a polyethylene based polymer with metallic inclusions, a nanoengineered polymer, has recently opened up great potential for many new commercial and industrial applications. The major advantage of developing these nanoengineered polymers is to be able to tailor the resistance and other properties by varying the composition of the polymer. The industrial usage of this polymer benefits from the addition of an electrically conductive, metallic coating. This research develops methods of electroplating nickel and copper layers on to the polymer substrates using DC and pulsed techniques.

Electroplating is conducted in a 1000 mL beaker using a specialized plating …

The Soft Mode Driven Dynamics Of Ferroelectric Perovskites At The Nanoscale: An Atomistic Study, Kevin Mccash

USF Tampa Graduate Theses and Dissertations

The discovery of ferroelectricity at the nanoscale has incited a lot of interest in perovskite ferroelectrics not only for their potential in device application but also for their potential to expand fundamental understanding of complex phenomena at very small size scales. Unfortunately, not much is known about the dynamics of ferroelectrics at this scale. Many of the widely held theories for ferroelectric materials are based on bulk dynamics which break down when applied to smaller scales. In an effort to increase understanding of nanoscale ferroelectric materials we use atomistic resolution computational simulations to investigate the dynamics of polar perovskites. Within …

Bio Roll-Up: Self-Assembling Scaffolds For Tissue Engineering, Chase Austyn Brisbois

Nanoscale Science & Engineering (discontinued with class year 2014)

There is an unmet need for controlled, dynamic cell scaffolds that will generate 3-D monolayers of epithelial cells for medical research and tissue engineering. Here we describe a system that uses photoimageable and biocompatible HEMA-based hydrogel bilayers that self-assemble from 2-D substrates into 3-D tube-shaped structures. These structures are patterned on top of another layer that demonstrates an ability to anchor the assembled structure and control the direction and extent of selfassembly. Cell viability was determined by MTT assay which shows material components comparable with the positive control (80-110%). Finally, the masks used in the experiments herein were redesigned to …