Nanoscience and Nanotechnology Commons^™

Adsorption And Diffusion Of Gases In Nano-Porous Materials, Nethika Sahani Suraweera

Doctoral Dissertations

In this work, a systematic computational study directed toward developing a molecular-level understanding of gas adsorption and diffusion characteristics in nano-porous materials is presented. Two different types of porous adsorbents were studied, one crystalline and the other amorphous. Physisorption and diffusion of hydrogen in ten iso-reticular metal-organic frameworks (IRMOFs) were investigated. A set of nine adsorbents taken from a class of novel, amorphous nano-porous materials composed of spherosilicate building blocks and isolated metal sites was also studied, with attention paid to the adsorptive and diffusive behavior of hydrogen, methane, carbon dioxide and their binary mixtures. Both classes of materials were …

Structure And Energetics Of Nanoparticles And Ionomer Films In Fuel Cell Catalyst Layers, Qianping He

Doctoral Dissertations

Improving the durability and utilization efficiency of the platinum-on-carbon (Pt/C) catalyst is of vital importance to the commercialization of the polymer electrolyte membrane fuel cell (PEMFC). This body of work provides molecular level insights to aid the fulfillment of this goal. Chapter 1 describes the use of molecular dynamics (MD) simulation in an effort to understand the Pt/C degradation issue from the nano-adhesion point of view. The roles of catalyst nanoparticle size, shape, Pt/C surface oxidation and the extent of ionomer film hydration are investigated to study their effects on nano-particle adhesion. It is found that the adhesion force strengthens …

Friction And Wear Of Polytetrafluoroethylene/Graphene Oxide Composite Thin Films, Justin Kyle Carter

Graduate Theses and Dissertations

Polytetrafluoroethylene (PTFE) is a commonly used solid lubricant due to its low coefficient of friction and chemical inertness. As a polymer, PTFE suffers from high wear and low adhesion to substrates limiting its use as a thin film. Thin PTFE films are ideal candidates for solid lubrication in micro-machines and bearing applications. The main goal of this work is to enhance the durability of thin PTFE films through the addition of few layered graphene oxide (GO) as filler. In order to address adhesion issues, the addition of an adhesive layer of polydopamine (PDA) between stainless steel substrates and thin PTFE …

Assessing Different Zeolitic Adsorbents For Their Potential Use In Kr And Xe Separation, Breetha Alagappan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Separation of Kr from Xe is an important problem in spent nuclear fuel fission gas management. The energy intensive and expensive cryogenic distillation method is currently used to separate these gases. In this thesis, we have carried out the research into appropriate sorbents for the separation of Kr and Xe using pressure swing adsorption. We have examined zeolites using gas adsorption studies as they have the potential to be more cost effective than other sorbents. Zeolites are microporous aluminosilicates and have ordered pore structures. The pores in zeolites have extra-framework cations are substantially free to move. The mobility of cations …

Zinc Oxide Nanorod Based Ultraviolet Detectors With Wheatstone Bridge Design, Arun Vasudevan

Graduate Theses and Dissertations

This research work, for the first time, investigated metal semiconductor-metal (MSM) zine oxide (ZnO) nanorod based ultra-violet (UV) detectors having a Wheatstone bridge design with a high

responsivity at room temperature and above, as well as a responsivity that was largely independent of the change in ambient conditions. The ZnO nanorods which acted as the sensing element of the detector were grown by a chemical growth technique. Studies were conducted to determine the effects on ZnO nanorod properties by varying the concentration of the chemicals used for the rod growth. These studies showed how the rod diameter and the deposition …

Multiscale Modeling Of The Hierarchical Structure Of Cellulose Nanocrystals, Fernando Luis Dri

Open Access Dissertations

Cellulose constitutes the most abundant renewable polymeric resource available today. It considered an almost inexhaustible source of raw material, and holds great promise in meeting increasing demands for environmentally friendly and biocompatible products. Key future applications are currently under development for the automotive, aerospace and textile industries. When cellulose fibers are subjected to acid hydrolysis, the fibers yield rod-like, highly crystalline residues called cellulose nanocrystals (CNCs). These particles show remarkable mechanical and chemical properties (e.g. Young Modulus ~200 GPa) within the range of other synthetically-developed reinforcement materials. Critical to the design of these materials are fundamental material properties, many of …

Development Of A Multiscale Atomistic Code To Investigate Self-Organized Pattern Formation Induced By Ion Irradiation, Zhangcan Yang

Open Access Dissertations

Various self-organized patterns including ripples and quantum dots can be induced by ion beam sputtering (IBS). For the past decades, the understanding of such phenomenon has been mainly relied on the Bradley-Harper theory that attributes the formation of self-organized patterns to the interplay between roughening by curvature dependence of erosion and smoothening by surface diffusion. Recently, the development of the crater function theory has overturned this erosion-based paradigm to a redistribution-based paradigm. The theory has proved that erosion is irrelevant and negligible in the pattern formation at low and intermediate incidence angles. Despite the success, there are still some questions …

Solar Cell Temperature Dependent Efficiency And Very High Temperature Efficiency Limits, John Robert Wilcox

Open Access Dissertations

Clean renewable solar energy is and will continue to be a critically important source of electrical energy. Solar energy has the potential of meeting all of the world's energy needs, and has seen substantial growth in recent years. Solar cells can convert sun light directly into electrical energy, and much progress has been made in making them less expensive and more efficient. Solar cells are often characterized and modeled at 25 °C, which is significantly lower than their peak operating temperature. In some thermal concentrating systems, solar cells operate above 300 °C. Since increasing the temperature drastically affects the terminal …

Hybrid Opto-Electrokinetic Technique For Micro/Nanomanipulation: Towards Application Of A Novel Non-Invasive Manipulation Technique In Microbiological Assay, Jae-Sung Kwon

Open Access Dissertations

This dissertation explores various physical mechanisms of the Rapid Electrokinetic Patterning (REP) technique suggested for rapid and precise on-chip manipulation of colloids and fluids, and bio-compatibility of the technique for biological applications. REP is a hybrid opto-electrokinetic technique that is driven by the simultaneous application of an AC electric field and a heating source. It can not only effectively transport and manipulate a fluid but also concentrate and pattern particles suspended in the fluid through the combined effect of an electrohydrodynamic flow, electrostatic colloidal interactions and an electrothermal microfluidic flow. These capabilities make REP a promising tool which can provide …

Graphene Decorated Substrates And Their Interfacial Characteristics, Anurag Kumar

Open Access Dissertations

Carbon nanotubes and graphene have been extensively studied for their excellent properties. As research on carbon expands, two major issues face the scientific community: (i) Expanding the scale of synthesis and (ii) Integration of different carbon structures for improved functionality. While significant advancements have been made in large-scale synthesis, room for improvement remains. As the scale of production increases, issues such as time, cost and energy that may otherwise not be very significant, begin to play greater roles. Thus, in order to effectively transition from laboratory prototypes to industrial products, a synthesis method that can address these issues is strongly …

Non-Silicon Mosfets And Circuits With Atomic Layer Deposited Higher-K Dielectrics, Lin Dong

Open Access Dissertations

The quest for technologies beyond 14nm node complementary metal-oxide-semiconductor (CMOS) devices has now called for research on higher-k gate dielectrics integration with high mobility channel materials such as III-V semiconductors and germanium. Ternary oxides, such as La2-xYxO3 and LaAlO3, have been considered as strong candidates due to their high dielectric constants and good thermal stability. Meanwhile, the unique abilities of delivering large area uniform thin film, excellent controlling of composition and thickness to an atomic level, which are keys to ultra-scaled devices, have made atomic layer deposition (ALD) technique an excellent choice.

In this thesis, we systematically study the atomic …

Micro Solar Thermal Energy Development And Use For Mems Power Applications, Emmanuel Ogbonnaya

Doctoral Dissertations

Increasing focus on alternative energy sources has produced significant progress across a wide variety of research areas. One particular area of interest has been solar energy. The sun represents sustainable and renewable energy source capable of meeting present energy needs without compromising the ability of future generations to meet theirs. Energy from the sun can be utilized in multiple ways. Direct rise in modern power generation typically involves either photovoltaic systems or large-scale solar thermal energy installations. While large-scale solar thermal energy generation is well advanced, there has been comparatively little research on smaller scale thermal energy collection and application. …

Negotiating The Inclusion Of Nanoscience Content And Technology In Science Curriculum: An Examination Of Secondary Teachers' Thinking In A Professional Development Project, Jennifer Gayle Wells

Dissertations and Theses

The Next Generation Science Standards represent a significant challenge for K-12 school reform in the United States in the science, technology, engineering and mathematics (STEM) disciplines (NSTA, 2012). One important difference between the National Science Education Standards (NRC, 1996) and the Next Generation Science Standards (Achieve, 2013) is the more extensive inclusion of nanoscale science and technology. Teacher PD is a key vehicle for implementing this STEM education reform effort (NRC, 2012; Smith, 2001).

The context of this dissertation study is Project Nanoscience and Nanotechnology Outreach (NANO), a secondary level professional development program for teachers that provides a summer workshop, …

Nanostructured Tin-Based Anodes For Lithium Ion Batteries With X-Ray Absorption Fine Structure Studies, Dongniu Wang

Electronic Thesis and Dissertation Repository

The practical applications of lithium ion batteries are highly dependent on the choice of electrodes, where boosting the materials innovations to design and achieve high capacity, excellent cycling performance, rate capability, low-cost and safe electrode materials provide the best solution. Based on this, tin-based anodes have gained great attention due to its high theoretical capacity, low cost and nontoxic nature to environment. Nevertheless, it undergoes significant volume variation(259%)during the operation of the battery, leading to pulverization and significant capacity fade. Thus, the practical application of tin-based anodes is still quite challenging. This thesis tackles issues related to tin-based anodes. It …

Development Of Nanostructured Limpo4 (M=Fe, Mn) As Cathodes For High Performance Lithium-Ion Batteries, Jinli Yang

Electronic Thesis and Dissertation Repository

Olivine LiFePO₄ has garnered the most interest because of its environmental benignity, high safety and theoretical capacity. However, the major limitation for LiFePO₄ is the intrinsically poor electronic conductivity and ionic conductivity. The sluggish kinetics for LiFePO₄ could be overcome by reducing the size, coating with conductive carbon, or doping with isovalent ions. The decrease of the size to nanoscale could shorten the diffusion time of Li ions in LiFePO₄ during intercalation/deintercalation process, but the nano-size active material usually accompanies with low tap density. Carbon coating and carbon addition could alleviate the poor electronic conductivity. However, …

Bending, Wrinkling, And Folding Of Thin Polymer Film/Elastomer Interfaces, Yuri Ebata

Open Access Dissertations

This work focuses on understanding the buckling deformation mechanisms of bending, wrinkling, and folding that occur on the surfaces and interfaces of polymer systems. We gained fundamental insight into the formation mechanism of these buckled structures for thin glassy films placed on an elastomeric substrate. By taking advantage of geometric confinement, we demonstrated new strategies in controlling wrinkling morphologies. We were able to achieve surfaces with controlled patterned structures which will have a broad impact in optical, adhesive, microelectronics, and microfluidics applications.

Wrinkles and strain localized features, such as delaminations and folds, are observed in many natural systems and are …

Discriminatory Bio-Adhesion Over Nano-Patterned Polymer Brushes, Saugata Gon

Open Access Dissertations

Surfaces functionalized with bio-molecular targeting agents are conventionally used for highly-specific protein and cell adhesion. This thesis explores an alternative approach: Small non-biological adhesive elements are placed on a surface randomly, with the rest of the surface rendered repulsive towards biomolecules and cells. While the adhesive elements themselves, for instance in solution, typically exhibit no selectivity for various compounds within an analyte suspension, selective adhesion of targeted objects or molecules results from their placement on the repulsive surface. The mechanism of selectivity relies on recognition of length scales of the surface distribution of adhesive elements relative to species in the …

Development Of Advanced Nanomaterials For Potential Lithium-Ion Battery Application, Jian Liu

Electronic Thesis and Dissertation Repository

Lithium-ion batteries (LIBs) are promising energy storage media under serious consideration for practical applications in electric vehicle (EVs) and hybrid electric vehicles (HEVs). However, to meet the requirements for EVs and HEVs, the performance of commercially available LIBs needs to be greatly improved in terms of the energy density, cycling life, rate capability, safety and cost. It is well known that the LIB performance is highly dependent on the choice of electrode materials. Therefore, it is greatly important to develop new electrode materials as replacements for graphite/LiCoO₂ used in commercial LIBs, in order to achieve high-performance LIBs desirable for …

Plasmonics Resonance Enhanced Active Photothermal Effects In Aluminum Nanoenergetics For Propulsion Applications, Jacques Abboud

Doctoral Dissertations

In this dissertation, aluminum nanoparticles (Al NPs) are shown capable to on-demand enhance and control the local photothermal energy deposition, both spatially and temporally, via active photothermal effects initiated by the localized surface plasmon resonance (LSPR) phenomenon, and amplified by the Al exothermal oxidation reactions. Experiments in dry and wet environments along with computational modeling of the photothermal process are very desirable for gaining fundamental understanding, ignition optimization and parameter exploration.

Combined phenomena of motion and ignition of Al NPs are explored first in this study. Both resulting from exposing a pile of the nanoenergetics in hand to a single …

Effect Of Relative Humidity In High Temperature Oxidation Of Ceria Nanoparticles Coating On 316l Austenitic Stainless Steel, Luis Giraldez Pizarro

Theses and Dissertations

A solution of 20 wt. % colloidal dispersion of Cerium Oxide (CeO2) in 2.5% of acetic acid, was used for depositing a coating film on an austenitic stainless steel 316L. Cerium compounds have been distinguished as potential corrosion inhibitors in coatings over several alloys. The oxidation behavior of the cerium oxide coating on 316L austenitic stainless steel alloy was evaluated in dry and humid environments, the weight changes (W/A) was monitored as a function of time using a custom built Thermogravimetrical Analysis (TGA) instrument at temperatures of 750C, 800C and 850C, and different relative humidity levels (0%, 10% and 20%) …

Theranostic Nanoparticles For The Treatment Of Cancer, Thomas Moore

All Dissertations

The main focus of this research was to evaluate the ability of a novel multifunctional nanoparticle to mediate drug delivery and enable a non-invasive approach to measure drug release kinetics in situ for the treatment of cancer. These goals were approached by developing a nanoparticle consisting of an inorganic core (i.e. gadolinium sulfoxide doped with europium ions or carbon nanotubes). This was coated with an external amphiphilic polymer shell comprised of a biodegradable polyester (i.e. poly(lactide) or poly(glycolide)), and poly(ethylene glycol) block copolymer. In this system, the inorganic core mediates the imaging aspect, the relatively hydrophobic polyester encapsulates hydrophobic anti-cancer …

Multiscale Study Of Batio3 Nanostructures And Nanocomposites, Lydie Louis Louis

Graduate Theses and Dissertations

Advancements in integrated nanoelectronics will continue to require the use of unique materials or systems of materials with diverse functionalities in increasingly confined spaces.

Hence, research on finite-dimensional systems strive to unearth and expand the knowledge of fundamental physical properties in certain key materials which exhibit numerous concurrent and exploitable functions.

Correspondingly, ferroelectric nanostructures, which particularly display a plethora of complex phenomena, prevalent in countless fields of research, are noteworthy candidates. Presently, however, the assimilation of zero-(0D) and one-dimensional (1D) ferroelectric into micro- or nano-electronics has been lagging, in part due to a lack of applied and fundamental studies but …

Fibrinogen-Conjugated Gold-Coated Magnetite Nanoparticles For Antiplatelet Therapy, Evan Schuerer Krystofiak

Theses and Dissertations

Ischemic stroke is the world's second leading cause of death and accounts for 2-4% of total worldwide healthcare costs. Ischemic stroke is caused by the occlusion of arteries responsible for supplying blood to the brain, which can result in disability or death. Arterial blood clots consist of aggregates of activated platelets wrapped in a mesh of fibrin. Tissue plasminogen activator, the only current FDA-approved treatment for ischemic stroke, functions by lysing fibrin in a blood clot. Unfortunately, tissue plasminogen activator significantly increases bleeding risks, which restricts its use. Alternatively, targeting and disrupting platelets within a clot could improve stroke outcome. …

The Legitimation Of Novel Technologies: The Case Of Nanotechnology, Anastasia E. Thyroff

Graduate Theses and Dissertations

Nanotechnology is the control, manipulation, and application of matter on an atomic and molecular level. The technology is complex and confusing to consumers, and its long-term safety and effect on the human body, as well as the environment, are unknown. However, for the past decade, nanotechnology has been used to develop consumer products and food with novel and attractive attributes.

Since nanotechnology is still not well known, it is not legitimized; that is, it has not been deemed safe and accepted by society. However, the market for nanotechnology is in the legitimation process. It will take an entire network of …

Structural Properties Of Ferroelectric Lead (Zirconium0.5,Titanium0.5)Oxygen3 Nanotube Array And Electronic Structure Of Lao Delta-Doped Strontium Titanate, Rajendra Prasad Adhikari

Graduate Theses and Dissertations

In this Dissertation we begin with two introductions on: 1) ferroelectricity and related phenomena, and 2) novel properties of Oxide electronics and the generation of two dimensional electron gas. We then give theoretical background of density functional theory (including LDA+U) and pseudopotentials. The first part of research work is about structural, polarization, and dielectric properties of ferroelectric Lead Zirconate Titanate (PZT) solid solution in the form of a nanotube array, embedded in a matrix medium of different ferroelectric strengths. We use the effective Hamiltonian derived from first-principles and finite-temperature Monte Carlo methods to determine the various properties. We revealed different …

Synthesis Of Platinum And Platinum-Copper Branched Nanoparticles For Electrooxidation Of Methanol, Eric Courtland Taylor

Graduate Theses and Dissertations

Platinum and Pt alloys are among the most important heterogeneous catalysts for many organic reactions and electrochemical reactions associated with the fuel cell technologies. How to reduce Pt usage while maintaining the performance of the catalysts becomes a subject for intensive research in materials chemistry. For heterogeneous catalysis, the catalytic reactivity and selectivity are strongly correlated with different crystallographic facets exposed on the surface. The facets with high-index planes whose Miller indices with at one is larger than unity are generally more active than those with low-index planes (e.g., {100}, {111}, and {110}). Tuning the morphology of the nanoparticles to …

Fluorescence Characterization Of Quantum Dots For Use As Biomarkers, Logan M. Grimes

Materials Engineering

Fluorescence profiles of quantum dots (QDs) were characterized to select the ideal QDs for encapsulation in phospholipids for use as biomarkers to selectively adhere to cancer cells. QDs were synthesized and extracted 0, 30, 60, and 90 seconds after precursor compounds were mixed. These extractions were isolated by extraction time. Portions from each vial were coated in a zinc sulfide shelling procedure, leaving at least half of the QD solution unshelled. These samples were characterized over four days to monitor fluctuations in fluorescence. This was done utilizing an Ocean Optics spectrometer in conjunction with Spectra Suite software. The central wavelength, …

Application Of Quantum Dots Onto Glass Wafers As A Feasibility Test For The Spectral Down Conversion Of Uv Light For Solar Cells, Anthony Fong

Materials Engineering

Quantum dots have the ability to convert high energy photons into multiple lower energy photons. Down conversion of such high energy photons from sources such as UV light can be beneficial for applications on solar cells which waste much of the energy in the form of thermalization. To test this theory, a solar cell was hooked up to an Amprobe Solar Analyzer and tests were run to compare power output with and without the presence of quantum dots. Additionally, quantum dots were spin coated onto a glass wafer to determine its adhesion ability. Spectrometer readings were taken of the wafer …

Nanomaterials For Biological Applications: Drug Delivery And Bio-Sensing, Hui Ma

University of New Orleans Theses and Dissertations

The idea of utilizing nanomaterials in bio-related applications has been extensively practiced during the recent decades. Magnetic nanoparticles (MPs), especially superparamagnetic iron oxide nanoparticles have been demonstrated as promising candidates for biomedicine. A protective coating process with biocompatible materials is commonly performed on MPs to further enhance their colloidal and chemical stability in the physiological environment. Mesoporous hollow silica is another class of important nanomaterials that are extensively studied in drug delivery area for their ability to carry significant amount of guest molecules and release in a controlled manner.

In this study, different synthetic approaches that are able to produce …

Novel Bimetallic Plasmonic Nanomaterials, Ritesh Sachan

Doctoral Dissertations

Plasmonic nanomaterials have attracted a lot of attention recently due to their application in various fields such as chemical and biological sensing, catalysis, energy harvesting and optical devices. However, there is a need to address several outstanding issues with these materials, including cost-effective synthesis, tunability in plasmonic characteristics, and long term stability. In this thesis, we have focused on bimetallic nanoparticles (NPs) of Ag and Co due to their immiscibility as well as their individual properties. First, a pulsed laser induced dewetting route was used to synthesize Ag-Co bimetallic plasmonic NPs. An synthesis parameter space was derived to show the …