Open Access. Powered by Scholars. Published by Universities.®

Nanoscience and Nanotechnology Commons

Open Access. Powered by Scholars. Published by Universities.®

Journal

Discipline
Institution
Keyword
Publication Year
Publication

Articles 1 - 9 of 9

Full-Text Articles in Nanoscience and Nanotechnology

Permeability Of Oxygen And Carbon Dioxide Through Pinholes In Barrier Coatings, Petri Johansson, Johanna Lahti, Jorma Vihinen, Jurkka Kuusipalo Jun 2019

Permeability Of Oxygen And Carbon Dioxide Through Pinholes In Barrier Coatings, Petri Johansson, Johanna Lahti, Jorma Vihinen, Jurkka Kuusipalo

Journal of Applied Packaging Research

Abstract

Packaging materials are typically made of multilayer structures combining polymers, metals and inorganic materials. Multilayer structures are selected in order to optimize the thickness and performance in packaging applications. Atomic layer deposited (ALD) aluminium oxide (Al2O3) layer provides good barrier properties against oxygen and carbon dioxide gases i.e. permeation of gases through ALD coated polymer films will reduce remarkably. The target was to study the effect of pinholes on the oxygen and carbon dioxide permeability of ALD coated extrusion-coated packaging paper. Pinholes were artificially generated by ultra violet (UV) laser drilling through the polymer layer ...


Analysis Of Dynamic Behaviour Of A Tensioned Carbon Nanotube In Thermal And Pressurized Environments, Ahmed Yinusa, Gbeminiyi Sobamowo Mar 2019

Analysis Of Dynamic Behaviour Of A Tensioned Carbon Nanotube In Thermal And Pressurized Environments, Ahmed Yinusa, Gbeminiyi Sobamowo

Karbala International Journal of Modern Science

In this paper, the dynamic behaviour of a tensioned single-walled carbon nanotubes (SWCNT) in thermal and pressurized environments is investigated analytically. With the applications of Bernoulli-Euler and thermal elasticity mechanics theories, the governing equation of motion are developed and solved using Laplace and Fourier transforms. The results of the close form solution in this work are in excellent agreements with past results in literature. From the parametric studies, it is established that as the magnitude of the pressure distribution at the surface increases, the deflection associated with the nanotube increases at any mode of vibration. However, a corresponding increase in ...


Optimization Of Processing Parameters Of Nanocomposite Film For Fresh Sliced Okra Packaging, Adeshina Fadeyibi Phd, Zinash Delebo Osunde Phd, Professor, Mohammed Gana Yisa Professor Feb 2019

Optimization Of Processing Parameters Of Nanocomposite Film For Fresh Sliced Okra Packaging, Adeshina Fadeyibi Phd, Zinash Delebo Osunde Phd, Professor, Mohammed Gana Yisa Professor

Journal of Applied Packaging Research

Nanocomposite film can be regarded as an active packaging material which is capable of curtailing microbial growth and keeping food for an extended life. In this research, the optimum processing parameters of cassava starch-zinc nanocomposite film was determined for packaging fresh-sliced okra. Samples of the films, with thickness ranging between 15– 17µm, were developed from the blends of 24g of cassava starch, 0–2 % zinc nanoparticles (NP) and 45–55 % glycerol in 600 ml distilled water. The ideal film was determined by optimizing the film processing parameters using Box-Behnken Design in Surface Response Methodology. It was subsequently used to package ...


Can Schools Use Nanotechnology To Prevent Cell Phones From Ringing, Sarah C. Boyer Sep 2017

Can Schools Use Nanotechnology To Prevent Cell Phones From Ringing, Sarah C. Boyer

Oklahoma Journal of Law and Technology

No abstract provided.


Design And Validation Of A Low Cost High Speed Atomic Force Microscope, Michael Ganzer, Tien Pham Sep 2017

Design And Validation Of A Low Cost High Speed Atomic Force Microscope, Michael Ganzer, Tien Pham

Journal of Undergraduate Research at Minnesota State University, Mankato

The Atomic Force Microscope (AFM) is an important instrument in nanoscale topography, but it is expensive and slow. The authors designed an AFM to overcome both limitations. To do this, they used an Optical Pickup Unit (OPU) from a DVD player as the laser and photodetector system to minimize cost and they did not implement a vertical control loop, which maximized potential speed. Students will be able to be use this device to make nanoscale measurements and engage in micro-engineering. To prototype this idea, the authors tested an OPU with a silicon wafer and demonstrated the ability to consistently distinguish ...


Enhanced Adhesion Of Superhydrophobic Zno Surface, Liqiu Zheng Dr., Chan Kwaichow B. May 2016

Enhanced Adhesion Of Superhydrophobic Zno Surface, Liqiu Zheng Dr., Chan Kwaichow B.

Georgia Journal of Science

The superhydrophobicity and the strong solid-liquid adhesion of the dually structured ZnO surface are attributed to the suitable size of microstructure and nanostructure. This phenomenon, so different from the Lotus effect, can be called the Petal effect— the super hydrophobicity and the enhanced solid-liquid adhesion coexist on the same surface. The Cassie impregnating model was proposed to understand the underlying reason.


Measuring The Effectiveness Of Photoresponsive Nanocomposite Coatings On Aircraft Windshields To Mitigate Laser Intensity, Ryan S. Phillips, Hubert K. Bilan, Zachary X. Widel, Randal J. Demik, Samantha J. Brain, Matthew Moy, Charles Crowder, Stanley L. Harriman, James T. O'Malley Iii, Joseph E. Burlas, Steven F. Emmert, Jason J. Keleher May 2015

Measuring The Effectiveness Of Photoresponsive Nanocomposite Coatings On Aircraft Windshields To Mitigate Laser Intensity, Ryan S. Phillips, Hubert K. Bilan, Zachary X. Widel, Randal J. Demik, Samantha J. Brain, Matthew Moy, Charles Crowder, Stanley L. Harriman, James T. O'Malley Iii, Joseph E. Burlas, Steven F. Emmert, Jason J. Keleher

Journal of Aviation Technology and Engineering

In 2004, pilots reported 46 laser illumination events to the Federal Aviation Administration (FAA), with the number increasing to approximately 3,600 in 2011. Since that time, the number of reported laser incidents has ranged from 3,500 to 4,000. Previous studies indicate the potential for flight crewmember distraction from bright laser light being introduced to the cockpit. Compositional variations of the photoresponsive nanocomposite coatings were applied to an aircraft windscreen using a modified liquid dispersion/heating curing process. The attenuating effects of the deposited films on laser light intensity were evaluated using an optical power meter and the ...


Measurement And Modeling Of Light Transmission Through Turbid Media, Alois (Al) J. Adams, Michael Fahrenwald, Long Do Jan 2007

Measurement And Modeling Of Light Transmission Through Turbid Media, Alois (Al) J. Adams, Michael Fahrenwald, Long Do

Journal of the Arkansas Academy of Science

No abstract provided.


Manufactured Nanomaterials: Avoiding Tsca And Osha Violations For Potentially Hazardous Substances, Peter J. Tomasco Jan 2006

Manufactured Nanomaterials: Avoiding Tsca And Osha Violations For Potentially Hazardous Substances, Peter J. Tomasco

Boston College Environmental Affairs Law Review

Public and private spending on nanotechnology research and development continues to increase. At the same time, government agencies around the world are spending millions to assess the potential risks to nanotechnology workers, the public, and the environment. However, innovative and opportunistic manufacturers are not waiting for test results before forging ahead. This Note focuses on the obligation of such manufacturers under the Toxic Substances Control Act (TSCA) to report and/or test nanomaterials for their effects on health, safety, and the environment prior to their release into the stream of commerce. In addition, this Note addresses the duty of manufacturers ...