Open Access. Powered by Scholars. Published by Universities.®

Nanoscience and Nanotechnology Commons

Open Access. Powered by Scholars. Published by Universities.®

Polymer and Organic Materials

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1 - 30 of 117

Full-Text Articles in Nanoscience and Nanotechnology

Impact Of Chain Architecture On The Thickness Dependence Of Physical Aging Rate Of Thin Polystyrene Films, Gregory Brown, Elizabeth Lewis, Bryan D. Vogt Jan 2020

Impact Of Chain Architecture On The Thickness Dependence Of Physical Aging Rate Of Thin Polystyrene Films, Gregory Brown, Elizabeth Lewis, Bryan D. Vogt

Williams Honors College, Honors Research Projects

The dynamics of polymer thin films have been demonstrated to be significantly altered from the bulk, but the origins of such differences are not well defined. In this work, we seek to understand the differences in the structural dynamics (or physical aging) of polystyrene (PS) through branching and other well defined architectures (comb and centipede). The aging dynamics of ultrathin films (< 30 nm) differ from relatively thick films (100-150nm) with linear PS thin films aging more rapidly than the relatively “bulk-like” thick films. Ellipsometric measurements are used to characterize the physical aging rate of the films. The change in film thickness and refractive index as the films are held below the glass transition temperature (Tg) provides a simple measure of the physical aging. In this study, four different architectures (linear, comb, 4 arm star, and centipede) will be investigated. For each PS architecture, the aging rate will be determined for film thickness ranging ...


Ambient Synthesis Of Nanomaterials By In Situ Heterogeneous Metal/Ligand Reactions, Boyce S. Chang, Brijith Thomas, Jiahao Chen, Ian D. Tevis, Paul Karanja, Simge Çınar, Amrit Venkatesh, Aaron Rossini, Martin M. Thuo Aug 2019

Ambient Synthesis Of Nanomaterials By In Situ Heterogeneous Metal/Ligand Reactions, Boyce S. Chang, Brijith Thomas, Jiahao Chen, Ian D. Tevis, Paul Karanja, Simge Çınar, Amrit Venkatesh, Aaron Rossini, Martin M. Thuo

Martin M. Thuo

Coordination polymers are ideal synthons in creating high aspect ratio nanostructures, however, conventional synthetic methods are often restricted to batch-wise and costly processes. Herein, we demonstrate a non-traditional, frugal approach to synthesize 1D coordination polymers by in situ etching of zerovalent metal particle precursors. This procedure is denoted as the heterogeneous metal/ligand reaction and was demonstrated on Group 13 metals as a proof of concept. Simple carboxylic acids supply the etchant protons and ligands for metal ions (conjugate base) in a 1 : 1 ratio. This scalable reaction produces a 1D polymer that assembles into high-aspect ratio ‘nanobeams’. We demonstrate ...


Fabrication Of High-Resolution Graphene-Based Flexible Electronics Via Polymer Casting, Metin Uz, Kyle Jackson, Maxsam S. Donta, Juhyung Jung, Matthew T. Lentner, John A. Hondred, Jonathan C. Claussen, Surya K. Mallapragada Jul 2019

Fabrication Of High-Resolution Graphene-Based Flexible Electronics Via Polymer Casting, Metin Uz, Kyle Jackson, Maxsam S. Donta, Juhyung Jung, Matthew T. Lentner, John A. Hondred, Jonathan C. Claussen, Surya K. Mallapragada

Jonathan C. Claussen

In this study, a novel method based on the transfer of graphene patterns from a rigid or flexible substrate onto a polymeric film surface via solvent casting was developed. The method involves the creation of predetermined graphene patterns on the substrate, casting a polymer solution, and directly transferring the graphene patterns from the substrate to the surface of the target polymer film via a peeling-off method. The feature sizes of the graphene patterns on the final film can vary from a few micrometers (as low as 5 µm) to few millimeters range. This process, applied at room temperature, eliminates the ...


Fabrication Of High-Resolution Graphene-Based Flexible Electronics Via Polymer Casting, Metin Uz, Kyle Jackson, Maxsam S. Donta, Juhyung Jung, Matthew T. Lentner, John A. Hondred, Jonathan C. Claussen, Surya K. Mallapragada Jul 2019

Fabrication Of High-Resolution Graphene-Based Flexible Electronics Via Polymer Casting, Metin Uz, Kyle Jackson, Maxsam S. Donta, Juhyung Jung, Matthew T. Lentner, John A. Hondred, Jonathan C. Claussen, Surya K. Mallapragada

Surya K. Mallapragada

In this study, a novel method based on the transfer of graphene patterns from a rigid or flexible substrate onto a polymeric film surface via solvent casting was developed. The method involves the creation of predetermined graphene patterns on the substrate, casting a polymer solution, and directly transferring the graphene patterns from the substrate to the surface of the target polymer film via a peeling-off method. The feature sizes of the graphene patterns on the final film can vary from a few micrometers (as low as 5 µm) to few millimeters range. This process, applied at room temperature, eliminates the ...


Fabrication Of High-Resolution Graphene-Based Flexible Electronics Via Polymer Casting, Metin Uz, Kyle Jackson, Maxsam S. Donta, Juhyung Jung, Matthew T. Lentner, John A. Hondred, Jonathan C. Claussen, Surya K. Mallapragada Jul 2019

Fabrication Of High-Resolution Graphene-Based Flexible Electronics Via Polymer Casting, Metin Uz, Kyle Jackson, Maxsam S. Donta, Juhyung Jung, Matthew T. Lentner, John A. Hondred, Jonathan C. Claussen, Surya K. Mallapragada

Chemical and Biological Engineering Publications

In this study, a novel method based on the transfer of graphene patterns from a rigid or flexible substrate onto a polymeric film surface via solvent casting was developed. The method involves the creation of predetermined graphene patterns on the substrate, casting a polymer solution, and directly transferring the graphene patterns from the substrate to the surface of the target polymer film via a peeling-off method. The feature sizes of the graphene patterns on the final film can vary from a few micrometers (as low as 5 µm) to few millimeters range. This process, applied at room temperature, eliminates the ...


Ambient Synthesis Of Nanomaterials By In Situ Heterogeneous Metal/Ligand Reactions, Boyce S. Chang, Brijith Thomas, Jiahao Chen, Ian D. Tevis, Paul Karanja, Simge Çınar, Amrit Venkatesh, Aaron Rossini, Martin M. Thuo Jul 2019

Ambient Synthesis Of Nanomaterials By In Situ Heterogeneous Metal/Ligand Reactions, Boyce S. Chang, Brijith Thomas, Jiahao Chen, Ian D. Tevis, Paul Karanja, Simge Çınar, Amrit Venkatesh, Aaron Rossini, Martin M. Thuo

Ames Laboratory Accepted Manuscripts

Coordination polymers are ideal synthons in creating high aspect ratio nanostructures, however, conventional synthetic methods are often restricted to batch-wise and costly processes. Herein, we demonstrate a non-traditional, frugal approach to synthesize 1D coordination polymers by in situ etching of zerovalent metal particle precursors. This procedure is denoted as the heterogeneous metal/ligand reaction and was demonstrated on Group 13 metals as a proof of concept. Simple carboxylic acids supply the etchant protons and ligands for metal ions (conjugate base) in a 1 : 1 ratio. This scalable reaction produces a 1D polymer that assembles into high-aspect ratio ‘nanobeams’. We demonstrate ...


Thin Biobased Transparent Uv-Blocking Coating Enabled By Nanoparticle Self-Assembly, Emily Olson, Yifan Li, Fang-Yi Lin, Ana Miller, Fei Liu, Ayuna Tsyrenova, Devin Palm, Greg W. Curtzwiler, Keith L. Vorst, Eric W. Cochran, Shan Jiang Jun 2019

Thin Biobased Transparent Uv-Blocking Coating Enabled By Nanoparticle Self-Assembly, Emily Olson, Yifan Li, Fang-Yi Lin, Ana Miller, Fei Liu, Ayuna Tsyrenova, Devin Palm, Greg W. Curtzwiler, Keith L. Vorst, Eric W. Cochran, Shan Jiang

Eric W. Cochran

A waterborne, UV-blocking, and visually transparent nanocomposite coating was formulated with ZnO nanoparticles and 2-hydroxyethyl cellulose (HEC). The coating is highly effective (< 5% UV and ~ 65% visible transmittance) and the film thickness (0.2 – 2.5 μm) is ~100 times thinner than the conventional coatings of similar UV-blocking performance. The superior properties are due to the fractal structures of ZnO nanoparticles assembled within the HEC matrix, revealed by scanning electron microscopy (SEM) and small-angle x-ray scattering (SAXS). Changing the binder to 2-hydroxyethyl starch (HES) diminishes the UV-blocking performance, as ZnO nanoparticles form dense globular aggregates, with an aggregation number measured by SAXS three orders of magnitude larger than the HEC coating. Since HEC and HES share the same same chemical compositionrepeating glucose unit in the polymer backbone, it suggests that the conformational characteristics of the binder polymer have a strong influence on the nanoparticle aggregation, which plays a key role in determining the optical performance. Similar structures were achieved with TiO2 nanoparticles. This study not only offers a cost-effective and readily scalable method to fabricate transparent UV-blocking coating, but also demonstrates that the unique fractal aggregation structures in a nanocomposite material can provide high performance and functionality without fully dispersing the nanoparticles.


Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen Jun 2019

Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen

Jonathan C. Claussen

Porous carbon is becoming an important and promising high-surface area scaffold material for various energy-based applications including catalysis. Here we demonstrate the growth of urchin-like platinum nanoparticles (PtNPs) on carbon monoliths derived from basswood that work as catalysts for micro underwater vehicle (MUV) propulsion via H2O2 decomposition. The carbon monoliths were constructed of natural basswood that was carbonized in argon (Ar) and subjected to a subsequent CO2 activation process that rendered the material into a hardened 3D porous activated carbonized wood (ACW) with inner channel voids measuring 10-70 μm in diameter. The PtNP nanourchins (500 nm or less in total ...


Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen Jun 2019

Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen

Shan Hu

Porous carbon is becoming an important and promising high-surface area scaffold material for various energy-based applications including catalysis. Here we demonstrate the growth of urchin-like platinum nanoparticles (PtNPs) on carbon monoliths derived from basswood that work as catalysts for micro underwater vehicle (MUV) propulsion via H2O2 decomposition. The carbon monoliths were constructed of natural basswood that was carbonized in argon (Ar) and subjected to a subsequent CO2 activation process that rendered the material into a hardened 3D porous activated carbonized wood (ACW) with inner channel voids measuring 10-70 μm in diameter. The PtNP nanourchins (500 nm or less in total ...


Thin Biobased Transparent Uv-Blocking Coating Enabled By Nanoparticle Self-Assembly, Emily Olson, Yifan Li, Fang-Yi Lin, Ana Miller, Fei Liu, Ayuna Tsyrenova, Devin Palm, Greg W. Curtzwiler, Keith L. Vorst, Eric W. Cochran, Shan Jiang Jun 2019

Thin Biobased Transparent Uv-Blocking Coating Enabled By Nanoparticle Self-Assembly, Emily Olson, Yifan Li, Fang-Yi Lin, Ana Miller, Fei Liu, Ayuna Tsyrenova, Devin Palm, Greg W. Curtzwiler, Keith L. Vorst, Eric W. Cochran, Shan Jiang

Chemical and Biological Engineering Publications

A waterborne, UV-blocking, and visually transparent nanocomposite coating was formulated with ZnO nanoparticles and 2-hydroxyethyl cellulose (HEC). The coating is highly effective (< 5% UV and ~ 65% visible transmittance) and the film thickness (0.2 – 2.5 μm) is ~100 times thinner than the conventional coatings of similar UV-blocking performance. The superior properties are due to the fractal structures of ZnO nanoparticles assembled within the HEC matrix, revealed by scanning electron microscopy (SEM) and small-angle x-ray scattering (SAXS). Changing the binder to 2-hydroxyethyl starch (HES) diminishes the UV-blocking performance, as ZnO nanoparticles form dense globular aggregates, with an aggregation number measured by SAXS three orders of magnitude larger than the HEC coating. Since HEC and HES share the same same chemical compositionrepeating glucose unit in the polymer backbone, it suggests that the conformational characteristics of the binder polymer have a strong influence on the nanoparticle aggregation, which plays a key role in determining the optical performance. Similar structures were achieved with TiO2 nanoparticles. This study not only offers a cost-effective and readily scalable method to fabricate transparent UV-blocking coating, but also demonstrates that the unique fractal aggregation structures in a nanocomposite material can provide high performance and functionality without fully dispersing the nanoparticles.


Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen Jun 2019

Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen

Mechanical Engineering Publications

Porous carbon is becoming an important and promising high-surface area scaffold material for various energy-based applications including catalysis. Here we demonstrate the growth of urchin-like platinum nanoparticles (PtNPs) on carbon monoliths derived from basswood that work as catalysts for micro underwater vehicle (MUV) propulsion via H2O2 decomposition. The carbon monoliths were constructed of natural basswood that was carbonized in argon (Ar) and subjected to a subsequent CO2 activation process that rendered the material into a hardened 3D porous activated carbonized wood (ACW) with inner channel voids measuring 10-70 μm in diameter. The PtNP nanourchins (500 nm or less in total ...


Permeability Of Oxygen And Carbon Dioxide Through Pinholes In Barrier Coatings, Petri Johansson, Johanna Lahti, Jorma Vihinen, Jurkka Kuusipalo Jun 2019

Permeability Of Oxygen And Carbon Dioxide Through Pinholes In Barrier Coatings, Petri Johansson, Johanna Lahti, Jorma Vihinen, Jurkka Kuusipalo

Journal of Applied Packaging Research

Abstract

Packaging materials are typically made of multilayer structures combining polymers, metals and inorganic materials. Multilayer structures are selected in order to optimize the thickness and performance in packaging applications. Atomic layer deposited (ALD) aluminium oxide (Al2O3) layer provides good barrier properties against oxygen and carbon dioxide gases i.e. permeation of gases through ALD coated polymer films will reduce remarkably. The target was to study the effect of pinholes on the oxygen and carbon dioxide permeability of ALD coated extrusion-coated packaging paper. Pinholes were artificially generated by ultra violet (UV) laser drilling through the polymer layer ...


Nano-Enhanced Composite Membranes For Water Desalination, Benjamin Fredrik Victor Sundling Von Fürstenrecht Jun 2019

Nano-Enhanced Composite Membranes For Water Desalination, Benjamin Fredrik Victor Sundling Von Fürstenrecht

Materials Engineering

In theory single walled carbon nanotubes (SWCNT) will aid in ion rejection due hydrophobicity and smoothness of the SWCNT. An efficient means of water desalination utilizing SWCNT in a membrane seems plausible. A lyotropic liquid crystal (LLC) solution was made with a synthesized polymerizable surfactant methacryloxy ethyl hexadecyl dimethyl ammonium bromide (C16MA) to help with vertical alignment of SWCNT. Due to SWCNT lack of solubility and tendency to agglomerate in water, a dispersion performed using an inert surfactant centrimonium bromide (CTAB) to make sure that the SWCNT were homogeneously dispersed in the solution without altering the hexagonal packing factor of ...


Iron-Containing Nanoparticles For The Treatment Of Chrionic Biofilm Infections In Cystic Fibrosis, Leisha M. A. Martin Apr 2019

Iron-Containing Nanoparticles For The Treatment Of Chrionic Biofilm Infections In Cystic Fibrosis, Leisha M. A. Martin

Nanoscience and Microsystems ETDs

Cystic fibrosis (CF) is the most common genetic disease resulting in the morbidity and mortality of Caucasian children and adults worldwide. Due to a genetic mutation resulting in malfunction of the Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) protein, CF patients produce highly viscous mucus in their respiratory tract. This leads to impairment of the mucociliary clearance of inhaled microbes. In addition to reduced microbial clearance, anoxic environmental conditions in the lungs promote biofilm-mode growth of the pathogenic bacterial species Pseudomonas aeruginosa. Chronic infections of P. aeruginosa begin in early childhood and typically persist until respiratory failure and death result. The ...


Gd5si4-Pvdf Nanocomposite Films And Their Potential For Triboelectric Energy Harvesting Applications, S. M. Harstad, P. Zhao, N. Soin, A. A. El-Gendy, Shalabh Gupta, Vitalij K. Pecharsky, J. Luo, Ravi L. Hadimani Mar 2019

Gd5si4-Pvdf Nanocomposite Films And Their Potential For Triboelectric Energy Harvesting Applications, S. M. Harstad, P. Zhao, N. Soin, A. A. El-Gendy, Shalabh Gupta, Vitalij K. Pecharsky, J. Luo, Ravi L. Hadimani

Ames Laboratory Accepted Manuscripts

The triboelectric energy generators prepared using the combination of self-polarized, high beta-phase nanocomposite films of Gd5Si4-PVDF and polyamide-6 (PA-6) films have generated significantly higher voltage of 425 V, short-circuit current density of 30 mA/m(2) and a charge density of similar to 116.7 C/m(2) as compared to corresponding values of 300 V, 30 mA/m(2) and 94.7 mu C/m(2), respectively for the pristine PVDF-(PA-6) combination. The magnetic measurements of the Gd5Si4-PVDF films display a ferromagnetic behavior as compared to diamagnetic nature of pristine PVDF. The presence of magnetic nanoparticles in the ...


Characterization And Optimization Of Parylene-C Deposition Process Using Scs Parylene Coater, Hannah Hastings, Eric D. Johnston, Gyuseok Kim Jan 2019

Characterization And Optimization Of Parylene-C Deposition Process Using Scs Parylene Coater, Hannah Hastings, Eric D. Johnston, Gyuseok Kim

Tool Data

Parylene-C has been deposited on bare Si wafers by physical vapor deposition using the SCS Coating Systems. Results show a 12 µm thick Parylene-C film with 10 g of dimer and negligible thickness variation across a wafer. We find a positive linear relationship between film thickness and mass of dimer at a range of 1 g to 18 g. However, the Al boat for dimer was burnt with 18 g of dimer, suggesting multiple depositions with 1 g to 10 g of dimer are recommended to achieve the Parylene-C film thicker than 12 µm.


Development Of Functional Biomaterials Using Protein Building Blocks, Li-Sheng Wang Jan 2019

Development Of Functional Biomaterials Using Protein Building Blocks, Li-Sheng Wang

Doctoral Dissertations

Proteins have intrinsic molecular properties that are highly useful for materials applications, especially for biomaterials. My research has focused on translating these molecular properties to materials surface behavior. In one approach, I developed a fluorous-based thermal treatment strategy to generate stable thin films from a variety of naturally abundant proteins. The different surface properties generated from the choice of protein were utilized to modulate cell-surface interactions, prevent bacterial adhesions, and control drug loading/release. I have used nanoimprint lithography to generate patterned protein films for cell alignment. Coupling with inkjet printing deposition, I have fabricated mixed protein films with spatial ...


Synthesis Of Graphene Nanosheets Through Spontaneous Sodiation Process, Deepak-George Thomas, Emrah Kavak, Niloofar Hashemi, Reza Montazami, Nicole N. Hashemi Nov 2018

Synthesis Of Graphene Nanosheets Through Spontaneous Sodiation Process, Deepak-George Thomas, Emrah Kavak, Niloofar Hashemi, Reza Montazami, Nicole N. Hashemi

Nicole N. Hashemi

Graphene is one of the emerging materials in the nanotechnology industry due to its potential applications in diverse areas. We report the fabrication of graphene nanosheets by spontaneous electrochemical reaction using solvated ion intercalation into graphite. The current literature focuses on the fabrication of graphene using lithium metal. Our procedure uses sodium metal, which results in a reduction of costs. Using various characterization techniques, we confirmed the fabrication of graphene nanosheets. We obtained an intensity ratio (ID/IG) of 0.32 using Raman spectroscopy, interlayer spacing of 0.39 nm and our XPS results indicate that our fabricated compound is ...


Cementitious Sensors Exhibiting Stopbands In Acoustic Transmission Spectra, Shreya Vemuganti Nov 2018

Cementitious Sensors Exhibiting Stopbands In Acoustic Transmission Spectra, Shreya Vemuganti

Shared Knowledge Conference

Ultrasonic monitoring in cementitious materials is challenging due to the high degree of attenuation. In wellbore environments, monitoring becomes more challenging due to inaccessibility. Meta materials, also known as acoustic bandgap materials, exhibit an interesting feature of forbidding the propagation of elastic/sound waves and isolate vibration in a certain frequency band. Traditionally, acoustic bandgap materials are developed with inclusions such as tin, aluminum, gold, steel in a polymer matrix. In this study, we present the development of three-dimensional cementitious sensors capable of exhibiting stopbands in the acoustic transmission spectra using carbon nanotubes. Relatively wide stopbands were engineered using Floquet-Bloch ...


Synthesis Of Graphene Nanosheets Through Spontaneous Sodiation Process, Deepak-George Thomas, Emrah Kavak, Niloofar Hashemi, Reza Montazami, Nicole N. Hashemi Jul 2018

Synthesis Of Graphene Nanosheets Through Spontaneous Sodiation Process, Deepak-George Thomas, Emrah Kavak, Niloofar Hashemi, Reza Montazami, Nicole N. Hashemi

Mechanical Engineering Publications

Graphene is one of the emerging materials in the nanotechnology industry due to its potential applications in diverse areas. We report the fabrication of graphene nanosheets by spontaneous electrochemical reaction using solvated ion intercalation into graphite. The current literature focuses on the fabrication of graphene using lithium metal. Our procedure uses sodium metal, which results in a reduction of costs. Using various characterization techniques, we confirmed the fabrication of graphene nanosheets. We obtained an intensity ratio (ID/IG) of 0.32 using Raman spectroscopy, interlayer spacing of 0.39 nm and our XPS results indicate that our fabricated compound is ...


Voltage-Controlled Deposition Of Nanoparticles For Next Generation Electronic Materials, Subhodip Maulik May 2018

Voltage-Controlled Deposition Of Nanoparticles For Next Generation Electronic Materials, Subhodip Maulik

LSU Doctoral Dissertations

This work presents both a feasibility study and an investigation into the voltage-controlled spray deposition of different nanoparticles, namely, carbon nanotubes (CNTs), as well as molybdenum disulfide (MoS2) and tungsten disulfide (WS2) from the transition metal dichalcogenides (TMDCs) family of materials. The study considers five different types of substrates as per their potential application to next-generation device electronics. The substrates selected for this research were: 1) aluminum as a conducting substrate, 2) silicon as a semiconducting substrate, 3) glass, silicon dioxide (SiO2), and syndiotactic poly methyl methacrylate (syndiotactic PMMA) as insulating substrates.

Since the 1990’s, carbon ...


Mesoscale Computational Studies Of Thin-Film Bijels, Joseph M. Carmack May 2018

Mesoscale Computational Studies Of Thin-Film Bijels, Joseph M. Carmack

Theses and Dissertations

Bijels are a relatively new class of soft materials that have many potential applications in the technology areas of energy, medicine, and environmental sustainability. They are formed by the arrest of binary liquid spinodal decomposition by a dispersion of solid colloidal nanoparticles. This dissertation presents an in-depth simulation study of Bijels constrained to thin-film geometries and in the presence of electric fields. We validate the computational model by comparing simulation results with previous computational modeling and experimental research. In the absence of suspended particles, we demonstrate that the model accurately captures the rich kinetics associated with diffusion-based surface-directed spinodal decomposition ...


Phase Transitions In Monochalcogenide Monolayers, Mehrshad Mehboudi May 2018

Phase Transitions In Monochalcogenide Monolayers, Mehrshad Mehboudi

Theses and Dissertations

Since discovery of graphene in 2004 as a truly one-atom-thick material with extraordinary mechanical and electronic properties, researchers successfully predicted and synthesized many other two-dimensional materials such as transition metal dichalcogenides (TMDCs) and monochalcogenide monolayers (MMs). Graphene has a non-degenerate structural ground state that is key to its stability at room temperature. However, group IV monochalcogenides such as monolayers of SnSe, and GeSe have a fourfold degenerate ground state. This degeneracy in ground state can lead to structural instability, disorder, and phase transition in finite temperature. The energy that is required to overcome from one degenerate ground state to another ...


Self-Assembled Barium Titanate Nanoscale Films By Molecular Beam Epitaxy, Timothy Allen Morgan May 2018

Self-Assembled Barium Titanate Nanoscale Films By Molecular Beam Epitaxy, Timothy Allen Morgan

Theses and Dissertations

One challenge of investigating ferroelectrics at the nanoscale has been controlling the stoichiometry during growth. Historically, the growth of barium titanate (BaTiO3) by molecular beam epitaxy has relied on a growth technique called shuttered RHEED. Shuttered RHEED controls the stoichiometry of barium titanate through the precise deposition of alternating layers of BaO and TiO2. While this approach has achieved 1% control of stoichiometry, finding self-limiting mechanisms to lock-in stoichiometry has been the focus of the growth community. The Goldschmidt tolerance factor predicts an unstable perovskite when barium sits in the titanium lattice site. The BaO-TiO2 phase diagram predicts a low-solubility ...


Printed Graphene Electrochemical Biosensors Fabricated By Inkjet Maskless Lithography For Rapid And Sensitive Detection Of Organophosphates, John A. Hondred, Joyce C. Breger, Nathan J. Alves, Scott A. Trammell, Scott A. Walper, Igor L. Medintz, Jonathan C. Claussen Mar 2018

Printed Graphene Electrochemical Biosensors Fabricated By Inkjet Maskless Lithography For Rapid And Sensitive Detection Of Organophosphates, John A. Hondred, Joyce C. Breger, Nathan J. Alves, Scott A. Trammell, Scott A. Walper, Igor L. Medintz, Jonathan C. Claussen

Jonathan C. Claussen

Solution phase printing of graphene-based electrodes has recently become an attractive low-cost, scalable manufacturing technique to create in-field electrochemical biosensors. Here we report a graphene-based electrode developed via Inkjet Maskless Lithography (IML) for the direct and rapid monitoring of triple-O linked phosphonate organophosphates (OPs); these constitute the active compounds found in chemical warfare agents and pesticides that exhibit acute toxicity as well as long-term pollution to soils and waterways. The IML printed graphene electrode is nano/microstructured with a 1000 mW benchtop laser engraver and electrochemically deposited platinum nanoparticles (dia. ~25 nm) to improve its electrical conductivity (sheet resistance decreased ...


Printed Graphene Electrochemical Biosensors Fabricated By Inkjet Maskless Lithography For Rapid And Sensitive Detection Of Organophosphates, John A. Hondred, Joyce C. Breger, Nathan J. Alves, Scott A. Trammell, Scott A. Walper, Igor L. Medintz, Jonathan C. Claussen Mar 2018

Printed Graphene Electrochemical Biosensors Fabricated By Inkjet Maskless Lithography For Rapid And Sensitive Detection Of Organophosphates, John A. Hondred, Joyce C. Breger, Nathan J. Alves, Scott A. Trammell, Scott A. Walper, Igor L. Medintz, Jonathan C. Claussen

Mechanical Engineering Publications

Solution phase printing of graphene-based electrodes has recently become an attractive low-cost, scalable manufacturing technique to create in-field electrochemical biosensors. Here we report a graphene-based electrode developed via Inkjet Maskless Lithography (IML) for the direct and rapid monitoring of triple-O linked phosphonate organophosphates (OPs); these constitute the active compounds found in chemical warfare agents and pesticides that exhibit acute toxicity as well as long-term pollution to soils and waterways. The IML printed graphene electrode is nano/microstructured with a 1000 mW benchtop laser engraver and electrochemically deposited platinum nanoparticles (dia. ~25 nm) to improve its electrical conductivity (sheet resistance decreased ...


Interpolymer Complexation As A Strategy For Nanoparticle Assembly And Crystallization, Srikanth Nayak, Nathan Horst, Honghu Zhang, Wenjie Wang, Surya Mallapragada, Alex Travesset, David Vaknin Jan 2018

Interpolymer Complexation As A Strategy For Nanoparticle Assembly And Crystallization, Srikanth Nayak, Nathan Horst, Honghu Zhang, Wenjie Wang, Surya Mallapragada, Alex Travesset, David Vaknin

Chemical and Biological Engineering Publications

Controlled self-assembly of nanoparticles into ordered structures is a major step in fabricating nanotechnology based devices. Here, we report on the self-assembly of high quality superlattices of nanoparticles in aqueous suspensions induced via interpolymer complexation. Using small angle X-ray scattering, we demonstrate that the NPs crystallize into superlattices of FCC symmetry, initially driven by hydrogen bonding and subsequently by van der Waals forces between the complexed coronas of hydrogen-bonded polymers. We show that the lattice constant and crystal quality can be tuned by polymer concentration, suspension pH and the length of polymer chains. Interpolymer complexation to assemble nanoparticles is scalable ...


Shear Driven Formation Of Nano-Diamonds At Sub-Gigapascals And 300 K, Yang Gao, Yanzhang Ma, Qi An, Valery I. Levitas, Yanyan Zhang, Biao Feng, Jharna Chaudhuri, William A. Goddard Jan 2018

Shear Driven Formation Of Nano-Diamonds At Sub-Gigapascals And 300 K, Yang Gao, Yanzhang Ma, Qi An, Valery I. Levitas, Yanyan Zhang, Biao Feng, Jharna Chaudhuri, William A. Goddard

Materials Science and Engineering Publications

The transformation pathways of carbon at high pressures are of broad interest for synthesis of novel materials and for revealing the Earth's geological history. We have applied large plastic shear on graphite in rotational anvils to form hexagonal and nanocrystalline cubic diamond at extremely low pressures of 0.4 and 0.7 GPa, which are 50 and 100 times lower than the transformation pressures under hydrostatic compression and well below the phase equilibrium. Large shearing accompanied with pressure elevation to 3 GPa also leads to formation of a new orthorhombic diamond phase. Our results demonstrate new mechanisms and new ...


Role Of Rigidity And Flexibility Of Functional Groups Within The Interior Of Supramolecular Assemblies And Their Implications, Oyuntuya Munkhbat Jan 2018

Role Of Rigidity And Flexibility Of Functional Groups Within The Interior Of Supramolecular Assemblies And Their Implications, Oyuntuya Munkhbat

Doctoral Dissertations

Engineering of supramolecular assemblies at molecular level renders functional nanomaterials that present explicit response to certain environmental changes. Systematic structure-property correlation studies will unravel the fundamental design constraints of these functional nanomaterials that fulfill the emergent need. This dissertation will primarily focus on understanding the role of rigidity and flexibility of functional groups within amphiphilic assemblies and employing this basic concept in drug delivery and diagnostics applications.

Supramolecular assemblies formed by amphiphilic dendrimers and polymers are preferred for this study as they exhibit high thermodynamic stability and structural flexibility. The role of aromatic interaction on the unimer-aggregate dynamic equilibrium was ...


The Processing And Polarization Reversal Dynamics Of Thin Film Poly(Vinylidene) Fluoride, Noel Mayur Dawson Dec 2017

The Processing And Polarization Reversal Dynamics Of Thin Film Poly(Vinylidene) Fluoride, Noel Mayur Dawson

Nanoscience and Microsystems ETDs

Many ferroelectric devices benefit from the ability to deposit thin ferroelectric layers. Poly(vinylidene) fluoride (PVDF) is the prototypical ferroelectric polymer, but processing of thin film ferroelectric PVDF remains a challenge due to the formation of large voids in the film during traditional thin film processing. The research described in this dissertation starts by investigating the origin of these voids. The cause of these voids is found to be caused by vapor induced phase separation (VIPS). Guided by the thermodynamics of VIPS, a process is then designed to produce void-free ferroelectric PVDF thin films on polar and non-polar substrates. The ...