Open Access. Powered by Scholars. Published by Universities.®

Nanoscience and Nanotechnology Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 30 of 57

Full-Text Articles in Nanoscience and Nanotechnology

Stamped Multilayer Graphene Laminates For Disposable In-Field Electrodes: Application To Electrochemical Sensing Of Hydrogen Peroxide And Glucose, Loreen R. Stromberg, John A. Hondred, Delaney Sanborn, Deyny Mendivelso-Perez, Srikanthan Ramesh, Iris V. Rivero, Josh Kogot, Emily Smith, Carmen Gomes, Jonathan C. Claussen Aug 2019

Stamped Multilayer Graphene Laminates For Disposable In-Field Electrodes: Application To Electrochemical Sensing Of Hydrogen Peroxide And Glucose, Loreen R. Stromberg, John A. Hondred, Delaney Sanborn, Deyny Mendivelso-Perez, Srikanthan Ramesh, Iris V. Rivero, Josh Kogot, Emily Smith, Carmen Gomes, Jonathan C. Claussen

Mechanical Engineering Publications

A multi-step approach is described for the fabrication of multi-layer graphene-based electrodes without the need for ink binders or post-print annealing. Graphite and nanoplatelet graphene were chemically exfoliated using a modified Hummers’ method and the dried material was thermally expanded. Expanded materials were used in a 3D printed mold and stamp to create laminate electrodes on various substrates. The laminates were examined for potential sensing applications using model systems of peroxide (H2O2) and enzymatic glucose detection. Within the context of these two assay systems, platinum nanoparticle electrodeposition and oxygen plasma treatment were examined as methods for improving sensitivity. Electrodes made ...


Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen Jun 2019

Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen

Mechanical Engineering Publications

Porous carbon is becoming an important and promising high-surface area scaffold material for various energy-based applications including catalysis. Here we demonstrate the growth of urchin-like platinum nanoparticles (PtNPs) on carbon monoliths derived from basswood that work as catalysts for micro underwater vehicle (MUV) propulsion via H2O2 decomposition. The carbon monoliths were constructed of natural basswood that was carbonized in argon (Ar) and subjected to a subsequent CO2 activation process that rendered the material into a hardened 3D porous activated carbonized wood (ACW) with inner channel voids measuring 10-70 μm in diameter. The PtNP nanourchins (500 nm or less in total ...


Direct Observation Of Early Stages Of Growth Of Multilayered Dna-Templated Au-Pd-Au Core-Shell Nanoparticles In Liquid Phase, Nabraj Bhattarai, Tanya Prozorov Feb 2019

Direct Observation Of Early Stages Of Growth Of Multilayered Dna-Templated Au-Pd-Au Core-Shell Nanoparticles In Liquid Phase, Nabraj Bhattarai, Tanya Prozorov

Ames Laboratory Accepted Manuscripts

We report here on direct observation of early stages of formation of multilayered bimetallic Au-Pd core-shell nanocubes and Au-Pd-Au core-shell nanostars in liquid phase using low-dose in situ scanning transmission electron microscopy (S/TEM) with the continuous flow fluid cell. The reduction of Pd and formation of Au-Pd core-shell is achieved through the flow of the reducing agent. Initial rapid growth of Pd on Au along <111> direction is followed by a slower rearrangement of Pd shell. We propose the mechanism for the DNA-directed shape transformation of Au-Pd core-shell nanocubes to adopt a nanostar-like morphology in the presence of T30 DNA ...


Acoustofluidic Self-Assembly Of Colloidal Materials For Additive Manufacturing, Meghana Akella Jan 2019

Acoustofluidic Self-Assembly Of Colloidal Materials For Additive Manufacturing, Meghana Akella

Graduate Theses and Dissertations

Additive manufacturing techniques like 3D printing are being used extensively to produce custom-designed products in all walks of life- from household items to human organs to space shuttle parts. However, most additive manufacturing platforms use single materials or use extremely complicated processes to print multi-material products. Also, the microstructure of the materials cannot be controlled in many cases. The 3D printing sector is a USD 7 Billion market and is expected to grow at a rate of 25% per annum. At this rate of development, the use of printing multi-material components and creating programmable material structures will be crucial for ...


Enhanced Electrochemical Biosensor And Supercapacitor With 3d Porous Architectured Graphene Via Salt Impregnated Inkjet Maskless Lithography, John A. Hondred, Igor L. Medintz, Jonathan C. Claussen Jan 2019

Enhanced Electrochemical Biosensor And Supercapacitor With 3d Porous Architectured Graphene Via Salt Impregnated Inkjet Maskless Lithography, John A. Hondred, Igor L. Medintz, Jonathan C. Claussen

Mechanical Engineering Publications

Advances in solution-phase graphene patterning has provided a facile route for rapid, low-cost and scalable manufacturing of electrochemical devices, even on flexible substrates. While graphene possesses advantageous electrochemical properties of high surface area and fast heterogenous charge transport, these properties are attributed to the edge planes and defect sites, not the basal plane. Herein, we demonstrate enhancement of the electroactive nature of patterned solution-phase graphene by increasing the porosity and edge planes through the construction of a multidimensional architecture via salt impregnated inkjet maskless lithography (SIIML) and CO2 laser annealing. Various sized macroscale pores (<25 to ∼250 μm) are patterned directly in the graphene surface by incorporating porogens (i.e., salt crystals) in the ...


Imaging Stress And Magnetism At High Pressures Using A Nanoscale Quantum Sensor, S. Hsieh, P. Bhattacharyya, C. Zu, T. Mittiga, T. J. Smart, F. Machado, B. Kobrin, T. O. Hohn, N. Z. Rui, Mehdi Kamrani, S. Chatterjee, S. Choi, M. Zaletel, V. V. Struzhkin, J. E. Moore, Valery I. Levitas, R. Jeanloz, N. Y. Yao Dec 2018

Imaging Stress And Magnetism At High Pressures Using A Nanoscale Quantum Sensor, S. Hsieh, P. Bhattacharyya, C. Zu, T. Mittiga, T. J. Smart, F. Machado, B. Kobrin, T. O. Hohn, N. Z. Rui, Mehdi Kamrani, S. Chatterjee, S. Choi, M. Zaletel, V. V. Struzhkin, J. E. Moore, Valery I. Levitas, R. Jeanloz, N. Y. Yao

Aerospace Engineering Publications

Pressure alters the physical, chemical and electronic properties of matter. The development of the diamond anvil cell (DAC) enables tabletop experiments to investigate a diverse landscape of high-pressure phenomena ranging from the properties of planetary interiors to transitions between quantum mechanical phases. In this work, we introduce and utilize a novel nanoscale sensing platform, which integrates nitrogen-vacancy (NV) color centers directly into the culet (tip) of diamond anvils. We demonstrate the versatility of this platform by performing diffraction-limited imaging (~600 nm) of both stress fields and magnetism, up to pressures ~30 GPa and for temperatures ranging from 25-340 K. For ...


Flexible Laser-Induced Graphene For Nitrogen Sensing In Soil, Nate T. Garland, Eric S. Mclamore, Nicholas D. Cavallaro, Deyny Mendivelso-Perez, Emily A. Smith, Dapeng Jing, Jonathan C. Claussen Nov 2018

Flexible Laser-Induced Graphene For Nitrogen Sensing In Soil, Nate T. Garland, Eric S. Mclamore, Nicholas D. Cavallaro, Deyny Mendivelso-Perez, Emily A. Smith, Dapeng Jing, Jonathan C. Claussen

Mechanical Engineering Publications

Flexible graphene electronics are rapidly gaining interest, but their widespread implementation has been impeded by challenges with ink preparation, ink printing, and post-print annealing processes. Laser-induced graphene (LIG) promises a facile alternative by creating flexible graphene electronics on polyimide substrates through a one-step laser writing fabrication method. Herein we demonstrate the use of LIG, created through a low-cost UV laser, for electrochemical ion selective sensing of plant-available nitrogen (i.e., both ammonium and nitrate ions: NH4+ and NO3-) in soil samples. The laser used to create the LIG was operated at distinct pulse rates (10, 20, 30, 40, and 50 ...


A Delayed Detached Eddy Simulation Model With Low Reynolds Number Correction For Transitional Swirling Flow In A Multi-Inlet Vortex Nanoprecipitation Reactor, Zhenping Liu, James C. Hill, Rodney O. Fox, Alberto Passalacqua, Michael G. Olsen Aug 2018

A Delayed Detached Eddy Simulation Model With Low Reynolds Number Correction For Transitional Swirling Flow In A Multi-Inlet Vortex Nanoprecipitation Reactor, Zhenping Liu, James C. Hill, Rodney O. Fox, Alberto Passalacqua, Michael G. Olsen

Chemical and Biological Engineering Publications

The objective of the presented work is to verify a delayed detached eddy simulation (DDES) model for simulating transitional swirling flow in a micro-scale multi-inlet vortex reactor (MIVR). The DDES model is a k-w based turbulence model with a low Reynolds number correction applied to the standard k-w model such that the Reynolds-averaged Navier-Stokes (RANS) component of the DDES model is able to account for low Reynolds number flow. By limiting the dissipation rate in the k-equation, the large-eddy simulation (LES) part of the DDES model behaves similarly to a one-equation sub-grid model. The turbulent Reynolds number is redefined to ...


Fluorescent Nanodiamonds: Past, Present, And Future, Masfer H. Alkahtani, Fahad Alghannam, Linkun Jiang, Abdulrahman Almethen, Arfaan A. Rampersaud, Robert Brick, Carmen L. Gomes, Marlan O. Scully, Philip R. Hemmer Jul 2018

Fluorescent Nanodiamonds: Past, Present, And Future, Masfer H. Alkahtani, Fahad Alghannam, Linkun Jiang, Abdulrahman Almethen, Arfaan A. Rampersaud, Robert Brick, Carmen L. Gomes, Marlan O. Scully, Philip R. Hemmer

Mechanical Engineering Publications

Multi-color fluorescent nanodiamonds (FNDs) containing a variety of color centers are promising fluorescent markers for biomedical applications. Compared to colloidal quantum dots and organic dyes, FNDs have the advantage of lower toxicity, exceptional chemical stability, and better photostability. They can be surface functionalized by techniques similar to those used for other nanoparticles. They exhibit a variety of emission wavelengths from visible to near infrared, with narrow or broad bandwidths depending on their color centers. In addition, some color centers can detect changes in magnetic fields, electric fields, and temperature. In this article review, we will discuss the current trends in ...


Synthesis Of Graphene Nanosheets Through Spontaneous Sodiation Process, Deepak-George Thomas, Emrah Kavak, Niloofar Hashemi, Reza Montazami, Nicole N. Hashemi Jul 2018

Synthesis Of Graphene Nanosheets Through Spontaneous Sodiation Process, Deepak-George Thomas, Emrah Kavak, Niloofar Hashemi, Reza Montazami, Nicole N. Hashemi

Mechanical Engineering Publications

Graphene is one of the emerging materials in the nanotechnology industry due to its potential applications in diverse areas. We report the fabrication of graphene nanosheets by spontaneous electrochemical reaction using solvated ion intercalation into graphite. The current literature focuses on the fabrication of graphene using lithium metal. Our procedure uses sodium metal, which results in a reduction of costs. Using various characterization techniques, we confirmed the fabrication of graphene nanosheets. We obtained an intensity ratio (ID/IG) of 0.32 using Raman spectroscopy, interlayer spacing of 0.39 nm and our XPS results indicate that our fabricated compound is ...


Nanoscale Multiphase Phase Field Approach For Stress- And Temperature-Induced Martensitic Phase Transformations With Interfacial Stresses At Finite Strains, Anup Basak, Valery I. Levitas Apr 2018

Nanoscale Multiphase Phase Field Approach For Stress- And Temperature-Induced Martensitic Phase Transformations With Interfacial Stresses At Finite Strains, Anup Basak, Valery I. Levitas

Aerospace Engineering Publications

A thermodynamically consistent, novel multiphase phase field approach for stress- and temperature-induced martensitic phase transformations at finite strains and with interfacial stresses has been developed. The model considers a single order parameter to describe the austenite↔martensitic transformations, and another N order parameters describing N variants and constrained to a plane in an N-dimensional order parameter space. In the free energy model coexistence of three or more phases at a single material point (multiphase junction), and deviation of each variant-variant transformation path from a straight line have been penalized. Some shortcomings of the existing models are resolved. Three different kinematic ...


Printed Graphene Electrochemical Biosensors Fabricated By Inkjet Maskless Lithography For Rapid And Sensitive Detection Of Organophosphates, John A. Hondred, Joyce C. Breger, Nathan J. Alves, Scott A. Trammell, Scott A. Walper, Igor L. Medintz, Jonathan C. Claussen Mar 2018

Printed Graphene Electrochemical Biosensors Fabricated By Inkjet Maskless Lithography For Rapid And Sensitive Detection Of Organophosphates, John A. Hondred, Joyce C. Breger, Nathan J. Alves, Scott A. Trammell, Scott A. Walper, Igor L. Medintz, Jonathan C. Claussen

Mechanical Engineering Publications

Solution phase printing of graphene-based electrodes has recently become an attractive low-cost, scalable manufacturing technique to create in-field electrochemical biosensors. Here we report a graphene-based electrode developed via Inkjet Maskless Lithography (IML) for the direct and rapid monitoring of triple-O linked phosphonate organophosphates (OPs); these constitute the active compounds found in chemical warfare agents and pesticides that exhibit acute toxicity as well as long-term pollution to soils and waterways. The IML printed graphene electrode is nano/microstructured with a 1000 mW benchtop laser engraver and electrochemically deposited platinum nanoparticles (dia. ~25 nm) to improve its electrical conductivity (sheet resistance decreased ...


An Experimental Study On Static And Dynamic Strain Sensitivity Of Smart Concrete Sensors Doped With Carbon Nanotubes For Shm Of Large Structures, Andrea Meoni, Antonella D'Alessandro, Austin Downey, Enrique García-Macías, Marco Rallini, A. Luigi Materazzi, Luigi Torre, Simon Laflamme, Rafael Castro-Triguero, Filippo Ubertini Jan 2018

An Experimental Study On Static And Dynamic Strain Sensitivity Of Smart Concrete Sensors Doped With Carbon Nanotubes For Shm Of Large Structures, Andrea Meoni, Antonella D'Alessandro, Austin Downey, Enrique García-Macías, Marco Rallini, A. Luigi Materazzi, Luigi Torre, Simon Laflamme, Rafael Castro-Triguero, Filippo Ubertini

Civil, Construction and Environmental Engineering Publications

The availability of new self-sensing cement-based strain sensors allows the development of dense sensor networks for Structural Health Monitoring (SHM) of reinforced concrete structures. These sensors are fabricated by doping cement-matrix materials with conductive fillers, such as Multi Walled Carbon Nanotubes (MWCNTs), and can be embedded into structural elements made of reinforced concrete prior to casting. The strain sensing principle is based on the multifunctional composites outputting a measurable change in their electrical properties when subjected to a deformation. Previous work by the authors was devoted to material fabrication, modeling and applications in SHM. In this paper, we investigate the ...


Interface Energy Transport Of Two-Dimensional (2d) Mos2, Pengyu Yuan Jan 2018

Interface Energy Transport Of Two-Dimensional (2d) Mos2, Pengyu Yuan

Graduate Theses and Dissertations

The bottleneck of most modern technologies and energy solutions has been attributed to the thermal problems at the nanoscale. Especially, the thermal transport across interfaces and in-plane direction can significantly influence the overall performance of 2D nanosystems. So accurate thermal-physical characterization of the 2D materials is very important for both fundamental research and industrial applications.

Focusing on 2D mechanically exfoliated MoS2, at first, we conduct a detailed temperature and laser power dependent micro-Raman spectroscopy study of FL MoS2 (4.2 to 45 nm thick) on c-Si substrate. We measured the interfacial thermal resistance (R) at room temperature decreases with increased ...


Phase-Field Approach For Stress- And Temperature-Induced Phase Transformations That Satisfies Lattice Instability Conditions. Part 2. Simulations Of Phase Transformations Si I↔↔ Si Ii, Hamed Babaei, Valery I. Levitas Jan 2018

Phase-Field Approach For Stress- And Temperature-Induced Phase Transformations That Satisfies Lattice Instability Conditions. Part 2. Simulations Of Phase Transformations Si I↔↔ Si Ii, Hamed Babaei, Valery I. Levitas

Aerospace Engineering Publications

A complete system of equations of the advanced phase-field theory for martensitic phase transformations (PTs) under a general stress tensor is presented. Theory includes a fully geometrically nonlinear formulation for the general case of finite elastic and transformational strains as well as anisotropic and different elastic properties of phases. Material parameters are calibrated, in particular, based on the crystal lattice instability conditions from atomistic simulations for martensitic PTs between cubic Si I and tetragonal Si II phases under complex triaxial compression-tension loading. A finite element algorithm and numerical procedure is developed and implemented in the code deal.II. Various 3D ...


Actuation Of Chitosan-Aptamer Nanobrush Borders For Pathogen Sensing, Katherine D. Hills, Daniela Alves De Oliveira, Nicholas D. Cavallaro, Carmen L. Gomes, Eric S. Mclamore Jan 2018

Actuation Of Chitosan-Aptamer Nanobrush Borders For Pathogen Sensing, Katherine D. Hills, Daniela Alves De Oliveira, Nicholas D. Cavallaro, Carmen L. Gomes, Eric S. Mclamore

Mechanical Engineering Publications

We demonstrate a sensing mechanism for rapid detection of Listeria monocytogenes in food samples using the actuation of chitosan-aptamer nanobrush borders. The bio-inspired soft material and sensing strategy mimic natural symbiotic systems, where low levels of bacteria are selectively captured from complex matrices. To engineer this biomimetic system, we first develop reduced graphene oxide/nanoplatinum (rGO-nPt) electrodes, and characterize the fundamental electrochemical behavior in the presence and absence of chitosan nanobrushes during actuation (pH-stimulated osmotic swelling). We then characterize the electrochemical behavior of the nanobrush when receptors (antibodies or DNA aptamers) are conjugated to the surface. Finally, we test various ...


Post Hoc Support Vector Machine Learning For Impedimetric Biosensors Based On Weak Protein-Ligand Interactions, Yue Rong, Andrea Padron, Kyle Hagerty, Natalie Nelson, Song Chi, Nemat O. Keyhani, Joe Katz, Shoumen P. A. Datta, Carmen Gomes, Eric S. Mclamore Jan 2018

Post Hoc Support Vector Machine Learning For Impedimetric Biosensors Based On Weak Protein-Ligand Interactions, Yue Rong, Andrea Padron, Kyle Hagerty, Natalie Nelson, Song Chi, Nemat O. Keyhani, Joe Katz, Shoumen P. A. Datta, Carmen Gomes, Eric S. Mclamore

Mechanical Engineering Publications

Impedimetric biosensors for measuring small molecules based on weak/transient interactions between bioreceptor and target analyte are a challenge for detection electronics, particularly in field studies or in analysis of complex matrices. Protein-ligand binding sensors have enormous potential for biosensing, but accuracy in complex solutions is a major challenge. There is a need for simple post hoc analytical tools that are not computationally expensive, yet provide near real time feedback on data derived from impedance spectra. Here, we show use of a simple, open source support vector machine learning algorithm for analyzing impedimetric data in lieu of using equivalent circuit ...


Cip2a Immunosensor Comprised Of Vertically-Aligned Carbon Nanotube Interdigitated Electrodes Towards Point-Of-Care Oral Cancer Screening, Shaowei Ding, Suprem R. Das, Benjamin J. Brownlee, Kshama Parate, Taylor Davis, Loreen Stromberg, Edward K.L. Chan, Joseph Katz, Brian D. Iverson, Jonathan C. Claussen Jan 2018

Cip2a Immunosensor Comprised Of Vertically-Aligned Carbon Nanotube Interdigitated Electrodes Towards Point-Of-Care Oral Cancer Screening, Shaowei Ding, Suprem R. Das, Benjamin J. Brownlee, Kshama Parate, Taylor Davis, Loreen Stromberg, Edward K.L. Chan, Joseph Katz, Brian D. Iverson, Jonathan C. Claussen

Mechanical Engineering Publications

Vertically aligned carbon nanotube array (VANTA) coatings have recently garnered much attention due in part to their unique material properties including light absorption, chemical inertness, and electrical conductivity. Herein we report the first use of VANTAs grown via chemical vapor deposition in a 2D interdigitated electrode (IDE) footprint with a high height-to-width aspect ratio (3:1 or 75:25 µm). The VANTA-IDE is functionalized with an antibody (Ab) specific to the human cancerous inhibitor PP2A (CIP2A)—a salivary oncoprotein that is associated with a variety of malignancies such as oral, breast, and multiple myeloma cancers. The resultant immunosensor is capable ...


Fluid‐Induced Alignment Of Carbon Nanofibers In Polymer Fibers, Mingchang Lu, Farrokh Sharifi, Nicole N. Hashemi, Reza Montazami Jul 2017

Fluid‐Induced Alignment Of Carbon Nanofibers In Polymer Fibers, Mingchang Lu, Farrokh Sharifi, Nicole N. Hashemi, Reza Montazami

Mechanical Engineering Publications

Carbon nanofiber/polycaprolactone (CNF/PCL) composite fibers are fabricated using a microfluidic approach. The fibers are made with different content levels of CNFs and flow rate ratios between the core and sheath fluids. The electrical conductivity and tensile properties of these fibers are then investigated. It is found that at a CNF concentration of 3 wt%, the electrical conductivity of the composite fiber significantly increases to 1.11 S m−1. The yield strength, Young's modulus, and ultimate strength of the 3 wt% CNF increase relative to the pure PCL by factors of 1.72, 2.88, and 1 ...


Morphology Inherence From Hollow Mofs To Hollow Carbon Polyhedrons In Preparing Carbon-Based Electrocatalysts, Yuchen Pei, Zhiyuan Qi, Xinle Li, Raghu V. Maligal-Ganesh, Tian Wei Goh, Chaoxian Xiao, Tianyu Wang, Wenyu Huang Feb 2017

Morphology Inherence From Hollow Mofs To Hollow Carbon Polyhedrons In Preparing Carbon-Based Electrocatalysts, Yuchen Pei, Zhiyuan Qi, Xinle Li, Raghu V. Maligal-Ganesh, Tian Wei Goh, Chaoxian Xiao, Tianyu Wang, Wenyu Huang

Chemistry Publications

Hollow carbon nanostructures are emerging as advanced electrocatalysts for the oxygen reduction reaction (ORR) due to the effective usage of active sites and the reduced dependence on expensive noble metals. Conventional preparation of these hollow structures is achieved through templates (e.g. SiO2, CdS, and Ni3C), which serve to retain the void interiors during carbonization, leading to an essential template-removal procedure using hazardous chemical etchants. Herein, we demonstrate the direct carbonization of unique hollow zeolitic imidazolate frameworks (ZIFs) for the synthesis of hollow carbon polyhedrons (HCPs) with well-defined morphologies. The hollow ZIF particles behave bi-functionally as a carbon source and ...


Enhanced Enzymatic Activity From Phosphotriesterase Trimer Gold Nanoparticle Bioconjugates For Pesticide Detection, John A. Hondred, Joyce C. Breger, Nate T. Garland, Eunkeu Oh, Kimihiro Susumu, Scott A. Walper, Igor L. Medintz, Jonathan C. Claussen Jan 2017

Enhanced Enzymatic Activity From Phosphotriesterase Trimer Gold Nanoparticle Bioconjugates For Pesticide Detection, John A. Hondred, Joyce C. Breger, Nate T. Garland, Eunkeu Oh, Kimihiro Susumu, Scott A. Walper, Igor L. Medintz, Jonathan C. Claussen

Mechanical Engineering Publications

The rapid detection of organophosphates (OPs), a class of strong neurotoxins, is critically important for monitoring acute insecticide exposure and potential chemical warfare agent use. Herein, we improve the enzymatic activity of a phosphotriesterase trimer (PTE3), an enzyme that selectively recognizes OPs directly, by conjugation with distinctly sized (i.e., 5, 10, and 20 nm diameter) gold nanoparticles (AuNPs). The number of enzymes immobilized on the AuNP was controlled by conjugating increasing molar ratios of PTE3 onto the AuNP surface via metal affinity coordination. This occurs between the PTE3-His6 termini and the AuNP-displayed Ni2+-nitrilotriacetic acid end groups and was ...


A Paper Based Graphene-Nanocauliflower Hybrid Composite For Point Of Care Biosensing, S. L. Burrs, R. Sidhu, M. Bhargava, J. Kieman-Lewis, N. Schwalb, Y. Rong, Carmen Gomes, Jonathan C. Claussen, D. C. Vanegas, E. S. Mclamore May 2016

A Paper Based Graphene-Nanocauliflower Hybrid Composite For Point Of Care Biosensing, S. L. Burrs, R. Sidhu, M. Bhargava, J. Kieman-Lewis, N. Schwalb, Y. Rong, Carmen Gomes, Jonathan C. Claussen, D. C. Vanegas, E. S. Mclamore

Mechanical Engineering Conference Presentations, Papers, and Proceedings

Graphene paper has diverse applications in printed circuit board electronics, bioassays, 3D cell culture, and biosensing. Although development of nanometal-graphene hybrid composites is commonplace in the sensing literature, to date there are only a few examples of nanometal-decorated graphene paper for use in biosensing. In this manuscript, we demonstrate the synthesis and application of Pt nano cauliflower-functionalized graphene paper for use in electrochemical biosensing of small molecules (glucose, acetone, methanol) or detection of pathogenic bacteria (Escherichia coli O157:H7). Raman spectroscopy, scanning electron microscopy and energy dispersive spectroscopy were used to show that graphene oxide deposited on nanocellulose crystals was ...


Development Of An Enzymatic Glucose Biosensor For Applications In Wearable Sweat-Based Sensing, Allison Anne Cargill Jan 2016

Development Of An Enzymatic Glucose Biosensor For Applications In Wearable Sweat-Based Sensing, Allison Anne Cargill

Graduate Theses and Dissertations

The recent development and commercial availability of wearable devices like the FITBIT® and Apple Watch® reflect an increasing consumer interest in actively monitoring health parameters. Though wearable devices are beginning to emerge in a variety of fields and applications, there is particular interest in the development of wearable monitors for continuously sensing blood glucose levels. Diabetes currently affects nearly 10% of the American population, a number that is expected to rise in the near future, prompting increased interest in noninvasive methods of monitoring glucose levels. This interest in noninvasive monitoring and the recent advent of continuous monitoring products ...


Fiber Based Approaches As Medicine Delivery Systems, Farrokh Sharifi, Avinash C. Sooriyarachchi, Hayriye Altural, Reza Montazami, Marissa Nichole Rylander, Nicole Nastaran Hashemi Jan 2016

Fiber Based Approaches As Medicine Delivery Systems, Farrokh Sharifi, Avinash C. Sooriyarachchi, Hayriye Altural, Reza Montazami, Marissa Nichole Rylander, Nicole Nastaran Hashemi

Mechanical Engineering Publications

The goal of drug delivery is to ensure that therapeutic molecules reach the intended target organ or tissue, such that the effectiveness of the drug is maximized. The efficiency of a drug delivery system greatly depends on the choice of drug carrier. Recently, there has been growing interest in using micro- and nanofibers for this purpose. The reasons for this growing interest include these materials’ high surface area to volume ratios, ease of fabrication, high mechanical properties, and desirable drug release profile. Here, we review developments in using these materials made by the most prevalent methods of fiber fabrication: electrospinning ...


Platinum Nanoparticle Decorated Sio2 Microfibers As Catalysts For Micro Unmanned Underwater Vehicle Propulsion, Bolin Chen, Nathaniel T. Garland, Jason Geder, Marius Pruessner, Eric Mootz, Allison Cargill, Anne Leners, Granit Vokshi, Jacob Davis, Wyatt Burns, Michael A. Daniele, Josh Kogot, Igor L. Medintz, Jonathan C. Claussen Jan 2016

Platinum Nanoparticle Decorated Sio2 Microfibers As Catalysts For Micro Unmanned Underwater Vehicle Propulsion, Bolin Chen, Nathaniel T. Garland, Jason Geder, Marius Pruessner, Eric Mootz, Allison Cargill, Anne Leners, Granit Vokshi, Jacob Davis, Wyatt Burns, Michael A. Daniele, Josh Kogot, Igor L. Medintz, Jonathan C. Claussen

Mechanical Engineering Publications

Micro unmanned underwater vehicles (UUVs) need to house propulsion mechanisms that are small in size but sufficiently powerful to deliver on-demand acceleration for tight radius turns, burst-driven docking maneuvers, and low-speed course corrections. Recently, small-scale hydrogen peroxide (H2O2) propulsion mechanisms have shown great promise in delivering pulsatile thrust for such acceleration needs. However, the need for robust, high surface area nanocatalysts that can be manufactured on a large scale for integration into micro UUV reaction chambers is still needed. In this report, a thermal/electrical insulator, silicon oxide (SiO2) microfibers, is used as a support for platinum nanoparticle (PtNP) catalysts ...


Platinum Nanoparticle Decorated Sio2 Microfibers As Catalysts For Micro Unmanned Underwater Vehicle Propulsion, Bolin Chen, Nathaniel T. Garland, Jason Geder, Marius Pruessner, Eric Mootz, Allison Cargill, Anne Leners, Granit Vokshi, Jacob Davis, Wyatt Burns, Michael A. Daniele, Josh Kogot, Igor L. Medintz, Jonathan C. Claussen Jan 2016

Platinum Nanoparticle Decorated Sio2 Microfibers As Catalysts For Micro Unmanned Underwater Vehicle Propulsion, Bolin Chen, Nathaniel T. Garland, Jason Geder, Marius Pruessner, Eric Mootz, Allison Cargill, Anne Leners, Granit Vokshi, Jacob Davis, Wyatt Burns, Michael A. Daniele, Josh Kogot, Igor L. Medintz, Jonathan C. Claussen

Mechanical Engineering Publications

Micro unmanned underwater vehicles (UUVs) need to house propulsion mechanisms that are small in size but sufficiently powerful to deliver on-demand acceleration for tight radius turns, burst-driven docking maneuvers, and low-speed course corrections. Recently, small-scale hydrogen peroxide (H2O2) propulsion mechanisms have shown great promise in delivering pulsatile thrust for such acceleration needs. However, the need for robust, high surface area nanocatalysts that can be manufactured on a large scale for integration into micro UUV reaction chambers is still needed. In this report, a thermal/electrical insulator, silicon oxide (SiO2) microfibers, is used as a support for platinum nanoparticle (PtNP) catalysts ...


Increasing The Activity Of Immobilized Enzymes With Nanoparticle Conjugation, Shaowei Ding, Allison A. Cargill, Igor L. Medintz, Jonathan C. Claussen Aug 2015

Increasing The Activity Of Immobilized Enzymes With Nanoparticle Conjugation, Shaowei Ding, Allison A. Cargill, Igor L. Medintz, Jonathan C. Claussen

Mechanical Engineering Publications

The efficiency and selectivity of enzymatic catalysis is useful to a plethora of industrial and manufacturing processes. Many of these processes require the immobilization of enzymes onto surfaces, which has traditionally reduced enzyme activity. However, recent research has shown that the integration of nanoparticles into enzyme carrier schemes has maintained or even enhanced immobilized enzyme performance. The nanoparticle size and surface chemistry as well as the orientation and density of immobilized enzymes all contribute to the enhanced performance of enzyme–nanoparticle conjugates. These improvements are noted in specific nanoparticles including those comprising carbon (e.g., graphene and carbon nanotubes), metal ...


Temperature-Dependent Thermal And Electrical Conduction In Metallic Nanostructures, Zhe Cheng Jan 2015

Temperature-Dependent Thermal And Electrical Conduction In Metallic Nanostructures, Zhe Cheng

Graduate Theses and Dissertations

In this work, temperature dependent electrical and thermal conduction in the bio-supported 3.2 nm-thin Ir nanofilm and individual silver nanowire are studied at reduced temperatures. For the Ir film, by studying the temperature-dependent behavior (300 K down to 43 K) of electron thermal conductivity (), we quantify the extremely confined defect-electron scatterings and isolate the intrinsic phonon-electron scattering that is shared by the bulk Ir. At low temperatures below 50 K,  of the film has almost two orders of magnitude reduction from that of bulk Ir. The film has ∂/∂T>0 while the bulk Ir has ∂/∂T <0. We introduce a unified thermal resistivity (=T/) to interpret these completely different ~T relations. It is found that the film and the bulk Ir share a very similar ~T trend while they have a different residual part (Θ0) at 0 K limit: 0~0 for the bulk Ir, and 0=5.5 mK2/W for the film. The Ir film and the bulk Ir have very close ∂Θ/∂T (75 to 290 K): 6.33×10-3 mK/W for the film and 7.62×10-3 mK/W for the bulk Ir. This strongly confirms the similar phonon-electron scattering in them. The temperature dependent behavior of the Lorenz number of the Ir film is also reported down to 10 K. Due to the strong defect-electron scattering, a very large residual electrical resistivity (1.2410-7 ·m) is observed for the film that dominates the overall electron transport (1.24~1.5510-7 ·m). The Debye temperature (221 K) of the film is found much smaller than that of bulk (308 K). This phonon softening strongly confirms the extensive surface and grain boundary electron scatterings. We find the Wiedemann-Franz Law still applies to our film even at low temperatures. The overall Lorenz number and that of imperfect structure (~2.25×10-8 W·Ω/K2) are close to the Sommerfeld value and shows little temperature dependence. This is contrast to other studied low dimensional metallic structures that have a much larger Lorenz number (3~7×10-8 W·Ω/K2). Electron tunneling and hopping in the biomaterial substrate are speculated responsible for the observed Lorenz number.

Additionally, the thermal ...


High Aspect Ratio Carbon Nanotube Membranes Decorated With Pt Nanoparticle Urchins For Micro Underwater Vehicle Propulsion Via H2o2 Decomposition, Kevin Marr, Bolin Chen, Eric J. Mootz, Jason Geder, Marius Pruessner, Brian J. Melde, Richard R. Vanfleet, Igor L. Medintz, Brian D. Iverson, Jonathan C. Claussen Jan 2015

High Aspect Ratio Carbon Nanotube Membranes Decorated With Pt Nanoparticle Urchins For Micro Underwater Vehicle Propulsion Via H2o2 Decomposition, Kevin Marr, Bolin Chen, Eric J. Mootz, Jason Geder, Marius Pruessner, Brian J. Melde, Richard R. Vanfleet, Igor L. Medintz, Brian D. Iverson, Jonathan C. Claussen

Mechanical Engineering Publications

The utility of unmanned micro underwater vehicles (MUVs) is paramount for exploring confined spaces, but their spatial agility is often impaired when maneuvers require burst-propulsion. Herein we develop high-aspect ratio (150:1), multiwalled carbon nanotube microarray membranes (CNT-MMs) for propulsive, MUV thrust generation by the decomposition of hydrogen peroxide (H2O2). The CNT-MMs are grown via chemical vapor deposition with diamond shaped pores (nominal diagonal dimensions of 4.5 × 9.0 μm) and subsequently decorated with urchin-like, platinum (Pt) nanoparticles via a facile, electroless, chemical deposition process. The Pt-CNT-MMs display robust, high catalytic ability with an effective activation ...


Utilizing Wide Band Gap, High Dielectric Constant Nanoparticles As Additives In Organic Solar Cells, Ryan S. Gebhardt, Pengfei Du, Akshit Peer, Mitch Rock, Michael R. Kessler, Rana Biswas, Baskar Ganapathysubramanian, Sumit Chaudhary Jan 2015

Utilizing Wide Band Gap, High Dielectric Constant Nanoparticles As Additives In Organic Solar Cells, Ryan S. Gebhardt, Pengfei Du, Akshit Peer, Mitch Rock, Michael R. Kessler, Rana Biswas, Baskar Ganapathysubramanian, Sumit Chaudhary

Mechanical Engineering Publications

We experimentally and theoretically investigate the effects of utilizing BaTiO3 nanoparticles as additives in polythiophene/fullerene solar cells. BaTiO3 nanoparticles were chosen because of their multifaceted potential for increasing exciton dissociation (due to their high dielectric constant) and light scattering. To achieve stable suspensions for device fabrication, the nanoparticles were functionalized with organic ligands. Solar cells fabricated in air showed ∼40% enhancement in the photocurrent primarily due to string-like aggregates of functionalized BaTiO3 particles that increase light absorption without hindering charge collection. Solar cells fabricated in an inert atmosphere yielded overall more efficient devices, but the string-like aggregates were absent ...