Mining Engineering Commons^™

Advancing Occupational Health In Mining: Investigating Low-Cost Sensors Suitability For Improved Coal Dust Exposure Monitoring, Mirza Muhammad Zaid, Nana Amoah, Ashish Kakoria, Yang Wang, Guang Xu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Exposure to coal dust in underground coal mines poses significant health risks to workers, including the development of diseases such as coal workers' pneumoconiosis and silicosis. Current available methods for monitoring coal dust exposure are expensive and time-consuming, necessitating the exploration of alternative approaches. Low-cost light scattering particulate matter sensors offer a promising solution, and its development in recent years has demonstrated some success in air quality monitoring However, its application in sensing coal particles is limited partially due to that the operating condition in a mine is different than the atmosphere. Thus, the objective of this paper is to …

Modeling The Load Of Sars-Cov-2 Virus In Human Expelled Particles During Coughing And Speaking, Yang Wang, Guang Xu, Yue-Wern Huang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Particle size is an essential factor when considering the fate and transport of virus-containing droplets expelled by human, because it determines the deposition pattern in the human respiratory system and the evolution of droplets by evaporation and gravitational settling. However, the evolution of virus-containing droplets and the size-dependent viral load have not been studied in detail. The lack of this information leads to uncertainties in understanding the airborne transmission of respiratory diseases, such as the COVID-19. In this study, through a set of differential equations describing the evolution of respiratory droplets and by using the SARS-CoV-2 virus as an example, …

The Mechanics Of Precision Presplitting, Anthony Joseph Konya

Doctoral Dissertations

"Precision Presplitting is a widely used method of presplit blasting for the mining and construction industries. In recent years considerable effort has gone into the development of empirical equations based on field data to be able to better design the Precision Presplit for various rock types and structural environments. However, the most widely discussed theory about the mechanics of the presplit formation, that of shockwave collisions, does not appear to be applicable for this method of presplitting.

This research has disproven this theory based on insufficient magnitude of the shockwave from modeling with basic wave mechanics. Other authors have suggested …

Dragline Excavation Simulation, Real-Time Terrain Recognition And Object Detection, Godfred Somua-Gyimah

Doctoral Dissertations

"The contribution of coal to global energy is expected to remain above 30% through 2030. Draglines are the preferred excavation equipment in most surface coal mines. Recently, studies toward dragline excavation efficiency have focused on two specific areas. The first area is dragline bucket studies, where the goal is to develop new designs which perform better than conventional buckets. Drawbacks in the current approach include operator inconsistencies and the inability to physically test every proposed design. Previous simulation models used Distinct Element Methods (DEM) but they over-predict excavation forces by 300% to 500%. In this study, a DEM-based simulation model …

Development Of A Waterjet System For Direct Delivery Of Granular Iron And Activated Carbon To Remediate Contaminated Aqueous Sediments, Gavin H.R. Risley, Andrew Curtis Elmore, Joel Gerard Burken, Grzegorz (Greg) Galecki

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

While the Techniques and Technologies Associated with Contaminated Sediment Remediation Are Relatively Mature, There Are Several Issues Associated with These Practices that Make Them Unattractive. the Inability of Currently Used Mechanical Mixing Implements to Place Amendments in Aqueous Environments and their Intrusive Behavior toward Benthic Communities Are Just Two Examples of a Necessity for an Improved Delivery Method. Waterjets May Be a Viable Option for Placement of Particulate Remediation Amendments, Such as Activated Carbon and Granular Iron, at Depth. a Custom Waterjet Nozzle and Injection System Has Been Fabricated by the Authors to Examine This Delivery Concept. the Developed Injection …

Using Coupled Eulerian And Lagrangian Grids To Model Explosive Interactions With Buildings, Braden Lusk, William P. Schonberg, Jason Baird, Robert S. Woodley, Warren Noll

Mining Engineering Faculty Research & Creative Works

This paper presents the development of a computational model that can be used to study the interactions between structures and detonating explosives contained within them. This model was developed as part of an effort to develop a rubble characterization model for use in AmmoSIM, an agent based urban tactical decision aid (UTDA) software for weapon-target pairing. The rubble pile created following the collapse of a building in a combat situation can significantly impact mission accomplishment, particularly in the area of movement and maneuver. The information provided by AmmoSIM will enable both platoon level and command center staff to make informed …

Rubble Pile Characterization Model, William P. Schonberg, Jason Baird, Paul Nicholas Worsey, Abdeldjelil Belarbi, Roger A. Laboube, Braden Lusk, R. Flanagan, H. Burleson, Robert S. Woodley, Warren Noll

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Rubble piles created following the collapse of a building in a combat situation can significantly impact mission accomplishment, particularly in the area of movement and maneuver. Rubble characteristics must be known, for example, in order to predict the ability of a vehicle to override the collateral damage from weapon effects in urban areas. Two types of models are developed: a first-order model and a first-principles-based model. In both models, we assume complete rubblization of the building and develop a rubble profile model using the size and composition of the collapsed structure to predict the rubble volume. In both cases, this …

Assessment Of Engineering Mechanics Instructional Multimedia In A Variety Of Instructional Settings, Richard H. Hall, Nancy Hubing, Timothy A. Philpot, Ralph E. Flori, Vikas Yellamraju

Business and Information Technology Faculty Research & Creative Works

Students from Ten Schools, Representing Seven Countries, Used Interactive Multimedia as a Part of their Engineering Statics Classes. the Software Consisted of Four Modules, Which Focused On: Mohr's Circle; Centroid and Moment of Inertia; Stress Transformation; and Structural Analysis. the Students Completed On-Line Surveys About their Experience with the Software. Analysis of the Results Indicated that Students Rated their Knowledge of the Subject Matter Covered in the Software as Increasing Significantly as a Consequence of using the Software. However, This Increase Was Substantially More Pronounced for Students in U.S. Schools. Students Rated the Software as Significantly More Effective Than their …

Interactive Learning Tools: Animating Statics, Nancy Hubing, David B. Oglesby, Timothy A. Philpot, Vikas Yellamraju, Richard H. Hall, Ralph E. Flori

Business and Information Technology Faculty Research & Creative Works

Computer-Based Modules for Engineering Instruction Must Be Concise, Flexible, Educational and Engaging in Order to Effectively Supplement Traditional Classroom Teaching Tools. a Computer Example that Takes More Time Than a Chalkboard Presentation is Not Likely to Be Useful in Today's Engineering Classroom. Flexible Navigation is Necessary So that the Instructor Can Quickly and Easily Respond to Student Questions. Useful Modules Must Also Improve Problem-Solving Skills or Clarify Troublesome Concepts in Order to Be Considered Worthy of Inclusion in the Limited Class Time Available. Finally, and Perhaps Most Importantly, Effective Computer-Based Modules Must Meet the Challenge of Holding the Student's Attention. …

7th Annual Umr-Dnr Conference On Energy -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

No abstract provided.

Energy Is Not Just Flipping The Switch Any More, Alfred L. Ransome

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The energy industry -- or basically the mining industry -- is becoming more complex and costly. It is imperative that the facts pertaining to the mineral industry be disseminated to the layman; the best method in the long term is by way of science and economics in the schools -- kindergarten through high school. The Mineral Information Committee of the Colorado Section of the SME-AIME in cooperation with the Metro State College, Denver is embarking on such a program, and the newly developed magazine, "RESOURCES", is the vehicle for spreading the message through the classroom.

Oil Shale Energy And The Environment, Stephen Utter

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Shale oil can be produced from oil shale by true In situ, modified in situ, and surface retorting methods. Both modified in situ and surface methods require mining of the oil shale. The environmental Implications of an oil shale mining industry are reviewed and the impacts upon land use, air and water quality, and ecological systems discussed. The Bureau's mining environmental research program is described and the results to date summarized.

5th Annual Umr-Dnr Conference On Energy -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This volume is a collection of refereed papers presented at the Fifth Annual UMR-DNR Conference on Energy held at the University of Missouri--Rolla on the dates of October 10 - 12, 1978.

Guided by the President's goal of energy independence by 1980, the UMR-DNR Conference on Energy organized in 1974 with the purpose of providing social scientists, scientists and engineers a means for rapid communication of their most recent research results in the field of energy and to offer solutions to the energy related problems of local government, business, industry and the general public. Since that time, there has been …

Control Of Trace Elements During The Increasing Development Of Coal For Energy, Bobby G. Wixson, Ernst Bolter

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The question of an energy crisis continues as many people in the United States have difficulty and become confused with what seems to be a continuing excess of gasoline, oil products and questionable reporting of price increases and profit margin by energy companies. However, the majority of the scientific and engineering community, knowledgable politicians and the general public realize that the energy crisis is real. Fortunately there still remains time to practice conservation and the development of alternative and new sources of energy if the United States can unite and implement a viable energy plan.