Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- Western Australia (3)
- Alginate Microapsules (1)
- Balsa Wood (1)
- Bridge (1)
- Building failures (1)
-
- Buildings – Design and construction (1)
- Cantilever Beam (1)
- Cavity (1)
- Columns (1)
- Combined Loading (1)
- Combined healing system (1)
- Elastoplastic (1)
- Engineering (1)
- Finite Element Analysis (1)
- Foodbank (1)
- Gaylord Boxes (1)
- Hydraulic (1)
- Induction heating (1)
- Irrigation (1)
- Irrigation channels (1)
- Irrigation equipment (1)
- Large Deflections (1)
- Mechanical (1)
- Modeling (1)
- Nonlinear (1)
- Oakland (1)
- Ord River region (W.A.) (1)
- Pallet Tilter (1)
- Plasticity (1)
- Plates (Engineering) (1)
- Publication
- Publication Type
Articles 1 - 12 of 12
Full-Text Articles in Applied Mechanics
Gaylord Produce Removal Machine, Marcus Takashi Hirose Lee, Jacob Michael Perlman, Carissa Abigail Kamm, Mark Misao Loera
Gaylord Produce Removal Machine, Marcus Takashi Hirose Lee, Jacob Michael Perlman, Carissa Abigail Kamm, Mark Misao Loera
Mechanical Engineering
This Final Design Review Report outlines the senior design project that began Winter Quarter of 2021 at California Polytechnic State University. Our team consists of three mechanical engineers and a general engineer, working together to design, build, and test a product for Alameda County Food Bank. The goal of the final product is to relieve volunteers and employees of tedious manual labor and increase efficiency during the removal of produce from large Gaylord containers. This document describes background research, the objectives of the project, chosen concept design, analysis and initial prototyping of said concept, the final design, and verification prototype …
Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov
Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov
Chemical Technology, Control and Management
The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The results of computational experiments on the study of the process of physically nonlinear deformation of isotropic elements of three-dimensional structures with a system of one- and double-periodic spherical cavities under uniaxial compression are presented. The influence and mutual influence of stress concentrators in the form of spherical cavities, vertically located two cavities and a horizontally located system of two cavities on the deformation of the structure are investigated. Numerical …
Hydraulic Balsa Wood Rising Bridge, Kaitlyn Greenfield
Hydraulic Balsa Wood Rising Bridge, Kaitlyn Greenfield
All Undergraduate Projects
What is the solution to allowing tall vessels to navigate past a vehicle bridge that is less than 10 [ft] above the water? To answer this question, a balsa wood bridge was designed, constructed, and tested. The bridge needed to articulate by mechanical means, allow for travel through the bridge, and be able to withstand ample force while the main structure only being constructed of balsa wood and glue. The project was analyzed in sections. These sections include: the bridge structure and its members, the hydraulic lift, and the pins needed for the bridge and hydraulic lift to operate. The …
A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen
A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen
Articles
Self-healing asphalt, aimed to produce a sustainable asphalt pavement using green technology, has been studied in the past two decades. Technologies including encapsulated rejuvenator and induction heating have been proposed, demonstrated in the laboratory, and gradually evaluated in field application. This paper looks into the synergy effect of the above two technologies, where induction heating serves as the asphalt damage repair mechanism, requiring just 2 min heating time and encapsulated rejuvenator will replenish (rejuvenate) aged asphalt binder and reinstate bitumen’s healing ability. Moreover, the increased temperature from induction heating could in turn accelerate the diffusion process of rejuvenator into aged …
Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai
Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai
ASEE IL-IN Section Conference
Application of Computational Tools to Spaghetti-Based Truss Design
Statics and Strength of Materials are two foundational courses for Mechanical/Civil Engineering. In order to assist students in better understanding and applying concepts to a meaningful design task, SolidWorks and theoretical calculation were used for a spaghetti-bridge design contest with the constraints of given maximum weight and allowable support-material weight. As the first step of this iterative designing process, both extrude feature and structural member were introduced to model planar bridge trusses. Then SolidWorks’ Statics module was used to run FEA analysis of the structural performance in efforts to optimize the …
Toward Building Resilient, Sustainable, And Smart Infrastructure In The 21st Century, Aly Mousaad Aly
Toward Building Resilient, Sustainable, And Smart Infrastructure In The 21st Century, Aly Mousaad Aly
Faculty Publications
In recent years, as a result of significant climate change, stringent windstorms are becoming more frequent than before. Given the threat that windstorms bring to people and property, wind/structural engineering research is imperative to improve the resilience of existing and new infrastructure, for community safety and assets protection. The Windstorm Impact, Science and Engineering (WISE) research program at Louisiana State University (LSU) focuses on creating new knowledge applicable to the mitigation of existing and new infrastructure, to survive and perform optimally under natural hazards. To achieve our research goals, we address two imperious challenges: (i) characterization of realistic wind forces …
On The Ramberg-Osgood Stress-Strain Model And Large Deformations Of Cantilever Beams, Ronald J. Giardina Jr
On The Ramberg-Osgood Stress-Strain Model And Large Deformations Of Cantilever Beams, Ronald J. Giardina Jr
University of New Orleans Theses and Dissertations
In this thesis the Ramberg-Osgood nonlinear model for describing the behavior of many different materials is investigated. A brief overview of the model as it is currently used in the literature is undertaken and several misunderstandings and possible pitfalls in its application is pointed out, especially as it pertains to more recent approaches to finding solutions involving the model. There is an investigation of the displacement of a cantilever beam under a combined loading consisting of a distributed load across the entire length of the beam and a point load at its end and new solutions to this problem are …
Vulnerability Of Progressive Collapse In Reinforced Concrete Flat-Plate Buildings, Jinrong Liu
Vulnerability Of Progressive Collapse In Reinforced Concrete Flat-Plate Buildings, Jinrong Liu
College of Engineering: Graduate Celebration Programs
- Progressive collapse is the spread of initial local failure, causing partial or
even total collapse of a building. - Flat plate structure is widely used for office and residential buildings.
- There is a large inventory of older flat plate building without continuous slab bottom reinforcement through columns.
- Limited knowledge exists regarding the risk of disproportionate collapse in
older flat-plates under sudden column removal during abnormal events. - Reliable mechanical model is needed for structural evaluation.
Design Of A Smart System For Monitoring Concrete Curing And Structural Health, William Quinn
Design Of A Smart System For Monitoring Concrete Curing And Structural Health, William Quinn
Theses
Structural Health Monitoring (SHM) is a rapidly growing sector of the construction industry. Automated monitoring methods arc mainly limited to global monitoring and the application of local monitoring methods has not gained widespread application due to the fact that currently technology requires that the systems are wired to data acquisition devices. This thesis presents a fully embeddable wireless sensor node for the local monitoring of structural concrete. It presents the first reported wireless embedded system implementation of the electromechanical impedance method using both resonant and antiresonant sensors for this purpose.
The first section of this thesis examines the feasibility of …
Irrigating Dry Season Crops In The Ord Valley : How To Prepare Land For Sowing, D F. Beech
Irrigating Dry Season Crops In The Ord Valley : How To Prepare Land For Sowing, D F. Beech
Journal of the Department of Agriculture, Western Australia, Series 4
THE best way to grow dry season crops of safflower, linseed and rapeseed under irrigation in the Ord Valley is by sowing on to broad flat ridges, separated by small furrows 3 ft. 6 in. apart.
This system of sowing is called the "corrugation" method.
The Burnett Control Gate For Irrigation Channels, B Swan
The Burnett Control Gate For Irrigation Channels, B Swan
Journal of the Department of Agriculture, Western Australia, Series 4
THIS type of check-gate for use in irrigation ditches, was evolved on the Kimberley Research Station and has definite advantages over wooden or concrete structures in that it is termite-proof and can be removed and replaced in a few minutes to permit of the channel being cleaned out by straight runs with modern machinery.
A Useful Farm-Made Roller, V E. Western
A Useful Farm-Made Roller, V E. Western
Journal of the Department of Agriculture, Western Australia, Series 4
A very serviceable compacting roller can be constructed at little expense by using discarded truck tyres.
The roller described here has an overall width of 5 ft. 3 in. and carries seven 9.00 x 24 semi-trailer tyres which had been discarded when the treads were worn smooth.