Mechanical Engineering Commons^™

Temperature Distributions Influencing Lateral Spread In Industrial Hot Rolling, Baohui Tian, Siegfried Kleber, Silvia Zinner, Peter Markiewicz

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

The Simulation For Ultrasonic Testing Based On Frequency-Phase Coded Excitation, Jiaying Zhang, Wenlong Tian, Tie Gang, Sen Cong, Zhaoyang Sheng

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study On Growth Model Of Cellular Automata Method In Solidification Simulation, Zhao Guo, Jian-Xin Zhou, Ya-Jun Yin, Chang-Chang Liu

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Integration Of Advanced Simulation And Visualization For Material Processing, Chenn Zhou

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Optimizing The Telescope Assembly Alignment Simulator For Sofia, Zoe E. Sharp, Alex Quyenvo, Jennifer Briggs, Brian Eney

STAR Program Research Presentations

The Stratospheric Observatory for Infrared Astronomy (SOFIA) conducts research on a modified Boeing 747sp aircraft. By using a variety of infrared science instruments mounted on a 2.7 meter telescope, researchers can make discoveries about the galactic center, star formation, and various topics associated with a deeper understanding of our universe. To efficiently collect data through the SOFIA instruments, the instruments must be tested and prepared prior to being placed on the aircraft. Therefore, with the use of the Telescope Assembly Alignment Simulator (TAAS), researchers can design and construct improvements needed for these instruments to efficiently perform while in flight. The …

Characterization Of Impact Properties Of Forged, Layered, And Additive Manufactured Titanium Alloy, Melissa Kathryn Matthes

UNLV Theses, Dissertations, Professional Papers, and Capstones

New additive manufactured (AM) materials have the potential of optimizing the geometry and microstructure of complex components to enhance their structural integrity while creating them quickly. However, the behavior of AM materials under extreme dynamic loading conditions is not fully understood. This is especially important in many applications. For example, spacecraft components may be impacted by micrometeorites at hyper velocities of multiple kilometers per second, inducing extreme dynamic loading.

One type of AM material is created by melting and solidifying metal along a specified path. Depending on the geometry, additional streams will be deposited side-by-side. This process affects the microstructure …

Investigation Of Digital Pump/Motor Control Strategies, Farid El Breidi

Open Access Dissertations

A pump is the heart of fluid power systems, it has a significant impact on the efficiency of many fluid power systems. Motors are the most common rotary actuators in fluid power systems. State-of-the-art pump/motor units can achieve efficiencies higher than 90% when operating at maximum displacement; however, as the displacement drops, the efficiency of these units drops to below 50%. A new digital pump/motor design aims at increasing these efficiencies by utilizing two electrically controlled high speed on/off valves per displacement chamber; these valves provide the ability to achieve variable displacement and allow freedom in choosing operating strategies. Such …

The Development Of A Prosthetic Training Software For Upper Limb Amputees, Tyler Kayne Sullins

USF Tampa Graduate Theses and Dissertations

The purpose of this study was to develop an intuitive software that aids in the field of prosthetic training and rehabilitation by creating an individualized visualization of joint angles. This software is titled “the prosthetic training software (PTS) for individualized joint angle representation”, and it enables the individualized portrayal of predicted or pre-recorded joint angles. The PTS is an intuitive program for clinicians and prosthesis users that produces an animation of a virtual avatar reflecting the user’s segment lengths and amputation for rehabilitation and training purposes.

The PTS consists of a graphical user interface (GUI) and a 3D visualization of …

Bunch Splitting Simulations For The Jleic Ion Collider Ring, R. Gamage, T. Satogata

Physics Faculty Publications

We describe the bunch splitting strategies for the proposed JLEIC ion collider ring at Jefferson Lab. This complex requires an unprecedented 9:6832 bunch splitting, performed in several stages. We outline the problem and current results, optimized with ESME including general parameterization of 1:2 bunch splitting for JLEIC parameters.

Energy Models Of The Txaire Houses, Tajudeen Amadu Annafi

Mechanical Engineering Theses

Model calibration is important as its functions improve building models. A calibrated model of the TxAIRE Houses #1 and #2 have been developed using the OpenStudio software. The model was developed and calibrated with data of the year 2014 but can be used predict electricity consumption of any year.

An actual meteorological year (AMY) weather file was also created for the houses which was used for calibration. The data used to develop this weather file were measured on-site which improved the accuracy of the model. It was found that an error difference of -1.0 % and -4.2 % occurred between …

Advances In Repurposing And Recycling Of Post-Vehicle-Application Lithium-Ion Batteries, Charles R. Standridge, Lindsay Corneal, Nicholas Baine

Mineta Transportation Institute Publications

Increased electrification of vehicles has increased the use of lithium-ion batteries for energy storage, and raised the issue of what to do with post-vehicle-application batteries. Three possibilities have been identified: 1) remanufacturing for intended reuse in vehicles; 2) repurposing for non-vehicle, stationary storage applications; and 3) recycling, extracting the precious metals, chemicals and other byproducts. Advances in repurposing and recycling are presented, along with a mathematical model that forecasts the manufacturing capacity needed for remanufacturing, repurposing, and recycling. Results obtained by simulating the model show that up to a 25% reduction in the need for new batteries can be achieved …

3d Infrastructure Condition Assessment For Rail Highway Applications, Teng Wang

Theses and Dissertations--Civil Engineering

Highway roughness is a concern for both the motoring public and highway authorities. Roughness may even increase the risk of crashes. Rail-highway grade crossings are particularly problematic. Roughness may be due to deterioration or simply due to the way the crossing was built to accommodate grade change, local utilities, or rail elevation. With over 216,000 crossings in the US, maintenance is a vast undertaking. While methods are available to quantify highway roughness, no method exists to quantitatively assess the condition of rail crossings. Conventional inspection relies on a labor-intensive process of qualitative judgment. A quantifiable, objective and extensible procedure for …

Torque Accuracy Improvement Via Explicit Torque Feedback Control For Internal Combustion Spark Ignition Engines, Anwar Alkeilani

Wayne State University Dissertations

At the present time, both control and estimation accuracies of engine torque are causes for under-achieving optimal drivability and performance in today’s production vehicles. The major focus in this area has been to enhance torque estimation and control accuracies using existing open-loop torque control and estimation structures. Such an approach does not guarantee optimum torque tracking accuracy and optimum estimation accuracy due to air flow and efficiencies estimations errors. Furthermore, current approach overlooks the fast torque path tracking which does not have any related feedback. Recently, explicit torque feedback control has been proposed in the literature using either estimated or …

Simulation Of Scalability For Autonomous Mobile Microgrids, Nathan Beyers

Dissertations, Master's Theses and Master's Reports

Microgrids are small-scale, decentralized systems for generation, storage, and management of electricity to provide power within a local area. By establishing these microgrids using autonomous robots, they can be made safer and more easily reconfigurable. This thesis presents a plan and outlines the infrastructure needed for scaling up previous experimental work on such systems. This work brings together a variety of tools in the form of both software and hardware to set the stage for how further development can be completed. An architecture for physical testing has been built to validate the full potential of navigation and making electrical connections …

Efficient Time-Dependent System Reliability Analysis, Zhifu Zhu

Doctoral Dissertations

"Engineering systems are usually subjected to time-variant loads and operate under time-dependent uncertainty; system performances are therefore time-dependent. Accurate and efficient estimate of system reliability is crucial for decision makings on system design, lifetime cost estimate, maintenance strategy, etc. Although significant progresses have been made in time-independent reliability analysis for components and systems, time-dependent system reliability methodologies are still limited. This dissertation is motivated by the need of accurate and effective reliability prediction for engineering systems under time-dependent uncertainty. Based on the classic First and Second Order Reliability Method (FORM and SORM), a system reliability method is developed for multidisciplinary …