Mechanical Engineering Commons^™

Applications Of Latent Heat Storage Using Phase Change Materials, Daniel Giroux

Honors Theses

Thermal Storage Systems are gaining more attention in recent years with the increased emphasis on more renewable energy sources. Energy storage is necessary whenever there is greater amounts of energy being produced than is required. Various improvements to the conventional heat storage system can be made by integrating latent heat storage into the conventional heat storage system. Latent heat storage can be utilized for thermal storage applications by using phase change materials, materials that will undergo a change in their physical state in the temperature range desired for heat storage.

Analysis was conducted on four different waxes considering the waxes …

Development Of A Fully Instrumented, Resonant Tensegrity Strut, Kentaro Barhydt

Honors Theses

A tensegrity is a structure composed of a series of rigid members connected in static equilibrium by tensile elements. A vibrating tensegrity robot is an underactuated system in which a set of its struts are vibrated at certain frequency combinations to achieve various locomotive gaits. Evolutionary robotics research lead by Professor John Rieffel focuses on exploiting the complex dynamics of tensegrity structures to control locomotion in vibrating tensegrity robots by finding desired gaits using genetic algorithms. A current hypothesis of interest is that the optimal locomotive gaits of a vibrating tensegrity exist at its resonant frequencies.

In order to observe …

Role Of Diagnostic Monitoring Software Versus Fault-Tolerant Components In The Development Of Spacecraft Avionics Systems, Andrew Attorri

Honors Theses

In any spacecraft, there are several systems that must work simultaneously to ensure a safe mission. One critical system is the ‘avionics’ system, which is comprised of all of the electronic controls on-board the spacecraft, as well as radio links to other craft and ground stations. These systems are present for both manned or unmanned spacecraft.

Throughout the history of spaceflight, there have been several disasters related to avionics failures. To make these systems safer and more reliable, two main strategies have been adopted. The first, more established approach is through use of fault-tolerant components, which can operate under a …

Analysis Of The Properties Of Supercapacitors And Possible Applications For The Technology, Vincent Oliveto

Honors Theses

Supercapacitors have a lot of excellent qualities that would make them a great substitute for batteries when it comes to electrical energy storage systems. Supercapacitors can discharge and charge very rapidly, they have a lifespan in the realm of millions of cycles, and they are much more efficient than batteries. Unfortunately, they cannot hold nearly as much charge as batteries. This paper seeks to further investigate the properties of supercapacitor technology and the best way to exploit these properties with the purpose of integrating them into renewable energy systems. There is currently a lot of research occurring around the world …

Optimization Of Superhydrophobic Surface Production Using Ambient-Dried Silica-Based Aerogels, Elizabeth Donlon

Honors Theses

Superhydrophobic surfaces exhibit particular properties that make them functional in various anti-sticking, anti-contamination, self-cleaning and drag reduction applications. Though such surfaces are found in nature - most notably the lotus leaf - they are difficult to produce. There are numerous methods and techniques for fabricating superhydrophobic surfaces. One such method is the sol-gel method, in which aerogel, a highly porous and lightweight material that can be made hydrophobic or superhydrophobic, is coated onto a surface. The purpose of this project is to devise a simple and repeatable procedure for making hydrophobic silica aerogel coatings that can be used for drag …

Design Of A Robotic Cownose Ray, Mark Marzotto

Honors Theses

Nature often inspires advances in science and technology and a promising example of this is mimicking locomotion of underwater animals. The main ways in which manmade aquatic vehicles propel themselves are water jets and propellers, which are inconsistent with how underwater animals swim. The cownose ray displays very efficient thrust with low frequency strokes by using a combination of oscillations and undulations with its pectoral fins. The goal of this paper is to mechanically replicate the actual fin motion of the cownose ray in order to capture these attractive features. The design will account for both the oscillations by designing …

Environmentally Friendly Sneakerboot Shanks And Their Effect On Aerobic Performance And Human Walking Gait, Adam Ashcroft

Honors Theses

The purpose of this research endeavor is to identify and record the differences in human performance from altering the shank material of a Forsake “Trail” sneakerboot. Three materials were analyzed in this study: the legacy nylon material that is currently used in Forsake boots, a PEEK thermoplastic impregnated carbon fiber, and a resin impregnated flax composite. The stiffness of each material was calculated using a standardized ISO 18896 longitudinal stiffness test. Each shank was then installed in size 10.5 (USA) “Trail” boots using an identical installation method in Forsake’s factory. The human performance tests were quantified by measuring the heart …

High Performance Thermal Insulation: Silica Aerogels In Construction Technology, Matthew Giarrusso

Honors Theses

The United States is a world leader in the production and expenditure of energy, accounting for 18% of the total global energy consumption in 2016, 40% of which was used for the heating, cooling, and lighting of commercial and residential buildings. Currently, traditional air-based insulation products are being used in thicker and more numerous layers in an attempt to keep up with contemporary codes and standards. One promising alternative to traditional insulation is silica aerogel. With a remarkably low density and thermal conductivity, silica aerogel could save energy, space, and weight in new and retrofit structures. Silica aerogels are currently …

Diesel Particulate Generation, Matthew Ferdenzi

Honors Theses

The goal of this project is to design a diesel particulate generator to test aerogels as diesel particulate filters. Diesel particulate generators are machines that generate diesel particulate matter, or diesel soot. Diesel particulate filters have been recently put into the market to help many car companies meet the ever-changing diesel emission regulations set by the EPA and other international agencies. The main goal of the filter is to block soot from exiting to the environment. Once the filter is full, the soot is oxidized and released. The problem with these filters is that they are large, costly, detrimental to …

Design Of Diffusiometer For Aerogel Monoliths, Kamin Sylvia

Honors Theses

Aerogels’ have great potential to be used as catalytic substrates and filters. To use them as such, we must first understand how gas flows through them. Diffusivity is a property of aerogels that relates the gas flow through a sample with the pressure gradient driving the flow. This project sets out to design an experimental apparatus (diffusiometer) and methodology that can be used to obtain diffusivity values of various kinds of aerogels. Adapting the method outlined in Stumpf et. al 1992[1], a diffusiometer was designed and built for aerogels at sub-atmospheric pressures. This device utilizes a control mass system rather …

Energy Sustainability Analysis Of A Baja Test Facility, Seth Bishop

Honors Theses

The objective of this paper is to study the viability of building a Baja SAE competition site so that UTC could host events in the future. Part of this includes defining a building size in square feet and estimating the construction cost. Once that is accomplished it is necessary to determine what equipment may be used at the site, how much power each piece of equipment would use, and how many hours each would be used for within the year. With this information it is then possible to estimate the annual power consumption for a competition year and a regular …

Improving Alternative Fuel Efficiency With Water Injection, Connor Strawn

Honors Theses

Alternative fuel internal combustion engines (ICEs) have been increasing in popularity as the harmful effects of pollution and the need for a sustainable energy source are becoming more apparent. Two alternative fuels, E85 and hydrogen gas, are considered in this study. These fuels are renewable and have less emissions than traditional fuels, but there are many inherent disadvantages to their use. Water injection could alleviate some of the issues that plague these fuels. To test this, a Briggs and Stratton Baja engine was used, with and without water injection. Gasoline with water injection showed better performance than without: the power …

Design Of A Pneumatic Conveying Test Loop For Laboratory Testing, Natalie Burdine

Honors Theses

Pneumatic conveying is the transportation of material through a closed conveying line in a gas medium via a pressure differential. In industry, pneumatic conveying is used extensively to handle materials: specifically, bulk solids and powders. 80% of all transported materials are bulk solids and pneumatic conveying is currently experiencing industry growth at a rate of 6.4% annually. Industrial pneumatic conveyor suppliers use specialized testing systems to make design decisions regarding specific applications, taking into account the conveyed material, the structure of the plant in which the system will be installed, and desired system characteristics such as necessary filtering or safety …

Design Of Force Versus Displacement Test Stand, Andrew Fritchley

Honors Theses

Performing mechanical design around sensors is a critical skill which all engineering students should be familiar with. Of equal importance is gathering and correctly interpreting electrical data from engineering tests. The aim of this project is to design a force versus displacement test stand for applications related to the measurement of spring force-displacement correlation. The design uses a strain gauge load cell, and a magnetic linear encoder to provide accurate, repeatable force and travel measurements. A mechanical design to mount each sensor was created based initial project constraints. Finite element analysis was performed on all critical components to ensure that …

Structural Reinforcement Of Streamline Tubing, Peter Grohs

Honors Theses

Structural integrity of suspension components is important to the safety and the longevity of vehicles. Streamline tubing, an aerodynamically shaped material used in high performance vehicle controls, can be prone to failure if not properly analyzed for its asymmetric geometry. The component was redesigned as a composite structure using modern materials to make a highly aerodynamic product stiffer, stronger, and lighter per unit weight than a conventional all steel design. Finite element analysis was conducted and five prototypes using different materials were constructed and tested. This method of maximizing component lightness and stiffness using the beneficial properties of each material …

On The Use Of Hertz’S Contact Stress For A Deformable Roller On A Half Space, Trent M. Andrus

Honors Theses

No abstract provided.

Evaluation Of Hertz’S Contact Stress Solution For Deformable Truncated Indenters, Kathleen M. Edwards

Honors Theses

No abstract provided.

Automated Filament Positioner For Microcombustion Pyrometry, Lauren F. Baxter

Honors Theses

No abstract provided.

Multicomponent Working Fluids In Organic Rankine Cycle Evaporators, Jennifer Fromm

Honors Theses

Organic Rankine cycles are a promising technology to convert waste heat energy into usable mechanical or electric power, giving them the potential to reduce fossil fuel emissions generated by traditional energy generation. The heat exchangers of these devices are of particular interest, as maximizing energy extraction from these free heat sources will increase net electrical power output. For this project I created a model to predict the effects of mixture working fluids on the evaporator performance of an organic Rankine cycle generator for a wide range of waste heat source temperatures. This model combines empirically derived heat exchanger performance parameters …

Case Study: Applying Lean Manufacturing Principles To The Prep Process Of The Hurricane Island Outward Bound School, Ben Branson

Honors Theses

This study synthesizes the author's area of education and occupational passions by applying lean manufacturing principles such as those of the Toyota Production System to the course preparation process at the Hurricane Island Outward Bound School. Over four weeks in the summer of 2017, the initial conditions were monitored and changes were implemented in both the layout of the base and the process itself, specifically the logistics portions. At the end of the season, the effectiveness of these changes were evaluated through a staff survey and comparison of evidence gathered during the summer. The time needed for prep logistics was …

A Study Of The Product Development Process For The Stackable Shelf, Stool, And Table, Harleigh Elizabeth Huggins

Honors Theses

The purpose of this project was to create a viable furniture product by utilizing the various phases of the product development process. The project began in Phase 0 with market research, formulation of an initial idea, and a product pitch to an executive board to check the viability of the idea. Then, the idea was developed into a concept with Phase 1 by finalizing an initial concept and looking into the potential customer. Next, the product concept was prototyped through several iterations of trial and error in Phase 2. By Phase 3, the product design was finalized, and an initial …