Mechanical Engineering Commons^™

Machine Components Test, Brandon Younger, Lauren Romero, Carlos Padilla

Mechanical Engineering

To enhance California Polytechnic State University’s Mechanical Engineering program, Dr. Schuster has sponsored Brandon Younger, Lauren Romero, and Carlos Padilla to design and develop a new lab for students in the Intermediate Design class to test real mechanical components. This report discusses the background and ideation process that lead to the development of the Educational Mechanical Breadboard for Transmission System Components (Machine Components Test). Additionally, detailed drawings, 3D modeling, testing plans, and analysis are included to show how the Machine Components Test design will work and be validated.

Gaf Glass Mat Splice Table Improvements, Grant Haug, Kevin Lansang, Ronald Lam, Michael Mooney

Mechanical Engineering

The GAF asphalt shingle production line in Shafter, CA requires continuous operation in order to maximize production efficiency. The assembly line process begins with feeding a large roll of fiberglass web into an accumulator. However, once the fiberglass roll approaches the end, it must be spliced with a new roll in order to maintain continuous feed into the production line. The splicing process must be fast and reliable to prevent any delay of the production line. Currently, this process is performed by two workers who manually feed the new fiberglass roll, align the two mats, cut the mats, apply glue …

Development Of A Design Tool For Biologically Inspired Fault Adaptive Design By Strategy Mapping, Nicholas Steven Huisman

Graduate Theses and Dissertations

A design tool for Biologically Inspired Fault Adaption that utilizes the concept of strategy mapping was developed and the development process and testing is presented in this paper. The concept of strategy mapping is derived primarily from the field of military theory and supposes that for any given specific problem, that there exists a specific solution for, a single strategy can be identified for that solution/problem combination. This strategy, when applied to the specific problem yields the specific solution. This specific solution is referred to as the “tactics” of the strategy. The strategy can also be directly applied to a …

Underwater Rope Fatigue Testing Machine, Napoleon Nino, Andrew Pimentel

Mechanical Engineering

The design and fabrication of an underwater rope fatigue testing machine meant to simulate the effects of an oceanic environment and the effects on rope.

Design Of A Meta-Material With Targeted Nonlinear Deformation Response, Zachary Satterfield

All Theses

The M1 Abrams tank contains track pads consist of a high density rubber. This rubber fails prematurely due to heat buildup caused by the hysteretic nature of elastomers. It is therefore desired to replace this elastomer by a meta-material that has equivalent nonlinear deformation characteristics without this primary failure mode. A meta-material is an artificial material in the form of a periodic structure that exhibits behavior that differs from its constitutive material. After a thorough literature review, topology optimization was found as the only method used to design meta-materials. Further investigation determined topology optimization as an infeasible method to design …

Design For Reduction Of Noise Produced By Natural Gas Regulator, Britany L. Chamberlain

Undergraduate Honors Capstone Projects

This document describes the design of a multi-stage restrictive orifice device (MSRO) that serves to reduce the noise produced by a regulator valve. The scope of this document explains the determination of the proper design through the development of analytical models, the design of a test fixture to obtain empirical data, and the corroboration of the models with empirical data to obtain a working solution.

Towards A Semantic Knowledge Management Framework For Laminated Composites, Vivek Premkumar

Masters Theses

The engineering of laminated composite structures is a complex task for design engineers and manufacturers, requiring significant management of manufacturing process and materials information. Ontologies are becoming increasingly commonplace for semantically representing knowledge in a formal manner that facilitates sharing of rich information between people and applications. Moreover, ontologies can support first-order logic and reasoning by rule engines that enhance automation. To support the engineering of laminated composite structures, this work developed a novel Semantic LAminated Composites Knowledge management System (SLACKS) that is based on a suite of ontologies for laminated composites materials and design for manufacturing (DFM) and their …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Umass Amherst Green Building Guidelines 2013, Ludmilla Pavlova-Gillham, Ted Mendoza, Ezra Small, Patricia O'Flaherty, Nariman Mostafavi, Mohamed Farzinmoghadam, Somayeh Tabatabaee Pozveh

Ludmilla D Pavlova

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Green Building Guidelines provide a framework for approaching new construction and major renovation projects at UMass Amherst that are undergoing LEED certification by focusing the conversation on green building aspects that are most important to the campus. They are intended to be the beginning of a dynamic conversation between designers, environmental consultants and constructors, university stakeholders, and users of new high performance buildings.

Design Of Holes And Web Openings In Railway Prestressed Concrete Sleepers, Erosha Kahawatta Gamage, Sakdirat Kaewunruen, Alex M. Remennikov

Sakdirat Kaewunruen

As the crosstie beam in railway track systems, the prestressed concrete sleepers (or railroad ties) are principally designed in order to carry wheel loads from the rails to the ground. Their design takes into account static and dynamic loading conditions. It is evident that prestressed concrete has played a significant role as to maintain the high endurance of the sleepers under low to moderate repeated impact loads. In spite of the most common use of the prestressed concrete sleepers in railway tracks, there have always been many demands from rail engineers to improve serviceability and functionality of concrete sleepers. For …

Increasing The Independence Of Children With Spina Bifida Through The Designing And Building Of A Mechanical Aide, Andrew Duffek, Robert Brent, Michael Hamada, Melissa Rodriguez

Industrial and Manufacturing Engineering

In order to assist Silas Hopper, a child with spina bifida, with getting into his wheelchair independently when being on the ground, the senior project team set out to construct a device that would fulfill that purpose. They did this through coming up with a strict definition of the problem to be solved, designing a number of potential solutions for the problem, prototyping to determine the feasibility of the solutions, making design modifications after testing the prototype, and building the final device.

The end product was a device that was able to operate mechanically, with a design that considered safety …

Database Design For The Collection And Visualization Of Sustainabilty Data, Henry A. Kozlowski, Nikhila Perugupalli

Industrial and Manufacturing Engineering

The goal of the project was to create a database that would be a repository for the high volume of sustainability data Illumina would like to collect. To couple with the database the project team’s goal was to design a system for visualizing the data graphically. Illumina required a database system that would be user-friendly, easy to add, delete, and edit data inputs, as well as a program that would allow the user to easily sort and graph data. The intent of the graphical representation of the data is to publish the graphs in a monthly report that would be …

Small Scale Erp Engine Design, Colyn Muir Dickson, Matthew Wade Haymond

Industrial and Manufacturing Engineering

This project set out to create a 1) low-cost, 2) dynamic, and 3) user-friendly small scale ERP software tool. These three key attributes position this product against complex and expensive systems such as SAP or Oracle. While the product still retains the dynamic and financial capabilities any good ERP system should have, the biggest value proposition is its simple and user-friendly interface. The software has a dual product-market fit: for small businesses as a low-cost planning tool, and for universities as a teaching tool. In the design phase, the team kept a primary focus on ergonomic software development while maintaining …

The Design Of An Optimized Patient-Specific In Vivo Spinal Fusion Cage Using Additive Manufacturing, Gorman Donnelly

Honors Theses

This project involved the design of an all-in-one patient-specific lumbar spinal fusion cage using Direct Metal Laser Sintering (DMLS) manufacturing. The cage is zero-profile and does not need the use of supplemental fixation. It was manufactured out of the titanium alloy Ti 6Al-4V using a DMLS rapid prototyping machine from a third party company. The endplates of the cage are patient-specific allowing for a larger surface contact area between the cage and the vertebral bodies than most cages on the market. This fosters a more successful fusion as well as decreases surgery time, effectively decreasing recovery time. Different porosity variations …

Hand Operated Tabletop Letterpress Assembly Instructions 1.0, George Chiu, Brendan Domos, Spencer Herzog, Nathan Sandidge, Kevin Weinstein

Theses

A group of RIT Mechanical Engineering students spent the 2014-2015 academic year in their senior design class collaborating with the RIT Cary Graphic Arts Collection to design and fabricate a 21st century hand-operated platen press.

The press that was designed during this engineering exercise met several requirements:

• be under 30 lbs
• fit in a 24 inch square table top space
• be manufactured with a majority of components which could be purchased from a standard parts supplier
• be able to print with commonly manufactured ink rollers, ink, letterpress chases, spacing and furniture
• the platen and packing had to be adjustable to …

Industrial Paper Tray, Kristin L. Woodward, Brady Bauer, Kevin Brown, Austin Mclaurine

Chancellor’s Honors Program Projects

No abstract provided.

A Collaborative Conceptual Aircraft Design Environment For The Design Of Small-Scale Uavs In A Multi-University Setting, Joseph Samuel Becar

Theses and Dissertations

In today's competitive global market, there is an ever-increasing demand for highly skilled engineers equipped to perform in teams dispersed over several time-zones by geography. Aerospace Partners for the Advancement of Collaborative Engineering (AerosPACE) is a senior design capstone program co-developed by academia and industry to help students develop the necessary skills to excel in the aerospace industry by challenging them to design, build, and fly an unique unmanned aerial vehicle (UAV). Students with little to no experience designing UAVs are put together in teams with their peers from geographically dispersed universities. This presents a significant challenge for the students …

Force Sensing In Arthroscopic Instruments Using Fiber Bragg Gratings, Daniel S. Yurkewich

Electronic Thesis and Dissertation Repository

Minimally-invasive surgery has revolutionized many medical procedures; however, it also impedes the ability to feel the interaction between the surgical tool and the anatomical part being operated on. In order to address this problem, it is necessary to obtain accurate measurements of the interaction forces exerted on the surgical tools during surgery. These forces can then be manifested to the surgeon via a haptic device or presented visually (visual-force feedback). This thesis describes the use of a fiber optic device to measure and display to the surgeon interaction forces acting on an arthroscopic tool. The sensorization of the tool involves …

A Microfluidic Mixer Utilizing Electrokinetic Relay Switching And Asymmetric Flow Geometries, Yiou Wang, Jiang Zhe, Prashanta Dutta, Benjamin Chung

Dr. Jiang Zhe

No abstract provided.

Design Considerations Towards The Construction Of Hybrid Floating Brush Seal (Hfbs), S. Lattime, Minel Braun, Fred Choy

Fred K. Choy

The hybrid floating brush seal (HFBS) represents an advance in brush seal technology by combining brush seal and film riding face seal technologies to create a hybrid seal that allows both axial and radial excursions of the sealed shaft without damage to seal integrity. At the same time, it eliminates interface surface speeds between the rotor and the brush bristles. This accomplishment is possible because the brush seal, which forms the primary seal, rotates with the shaft, while floating against a hydrodynamic face seal surface, which makes up the secondary seal. The present paper presents continuation work (Int J of …

Design Of A Thermally Activated Energy Harvesting System, D, Quinn, Zachary Toom

Dr. D Dane Quinn

No abstract provided.

A Survey Of What Customers Want In A Cell Phone Design, Chen Ling, Wonil Hwang, Gavriel Salvendy

Dr. Chen Ling

The cell phone is an information appliance that has been widely used. It provides instant access to information and makes people more ‘connected’. The objective of our study is to investigate the relationship among the design features of the cell phone and identify the most important design features and design factors. In our survey study, we asked 1,006 college students using a 7-point Likert scale structured questionnaire to evaluate their preference of the design features and overall satisfaction of their current cell phone. Nine design factors were derived. Ten cell phone design features and five design factors that significantly impact …

Effective Utilization Of Excess Energy In Standalone Hybrid Renewable Energy Systems For Improving Comfort Ability And Reducing Cost Of Energy: A Review And Analysis

Faculty of Engineering University of Malaya

One of the features that characterize renewable energy sources is their variability and intermittency. Intermittency covers both the predictable and unpredictable variations of their power outputs and uncertainty in the power availability. To overcome the drawback of intermittency, special design considerations should be taken into account. These additional design considerations increases the overall cost of the renewable energy systems. Adding storage system and/or backup source to the renewable sources is one of the measures used to guarantee the continuity of power supply to the loads, and therefore improve the reliability of the renewable energy systems. The operation of renewable energy …

Guided Routing On Spinning Microfluidic Platforms

Faculty of Engineering University of Malaya

Flow directionality, valving and liquid routing in centrifugal microfluidics (Lab-on-CD) are typically controlled by applying centrifugal and Coriolis forces and have been the subject of active research interest in recent years. Determining and switching the flow direction at a T-junction is a common fluidic operation important for implementing several chemical and clinical assays for Lab-on-CDs. The present work describes a novel approach to route samples and control flow direction on a spinning disc that employs a guiding microstructure that relies on a two-stage valve comprised of an auxiliary inlet, which is a recess embedded at a T-junction, and a bent …

Design And Biomechanical Performance Analysis Of A User-Friendly Orthotic Device

Faculty of Engineering University of Malaya

Material selection and proper design are essential for developing a new product, especially biomedical devices. Stance-control-orthosis (SCO) are walking assistive device for the patients with weak quadriceps. This manuscript presents the development of a prefabricated SCO with suitable material and design. It is 45% lighter than commercially available prefabricated device. It contains some adjustable features to make it competent for wide range of patients in terms of height (153-183 cm) and weight. Finite element analysis (FEA) was used for selecting the best material and optimizing weight of different components of this device. Basic structures the device were made of aluminum …

Modified Robust External Force Control With Disturbance Rejection With Application To Piezoelectric Actuators

Faculty of Engineering University of Malaya

In micromanipulation applications, controlling the force exerted on the object is of great importance. In such cases, any uncontrolled forces may damage the object or cause system failure. However, the presence of disturbances such as impedance uncertainties and hysteresis can strongly degrade force control performance and even lead to instability. Therefore, accurate force control when internal and external disturbances occur is a significant challenge. Conventional control methods usually have a number of restrictive conditions especially on the disturbance bounds. To rectify those issues, a modified robust disturbance rejection-based force control approach is proposed in this paper. For this purpose, an …

2015 Zips Sae Baja Brakes And Throttle System, Philip A. Bennett

Williams Honors College, Honors Research Projects

The SAE Baja student design team at The University of Akron is one of the longest-standing design teams at the university. The purpose of this team is to design, manufacture, test, and race an off-road vehicle within the guidelines of competition established by the Society of Automotive Engineers. The vehicle is made up of a small number of subsystems including frame, drivetrain, suspension, steering, and braking. The following will discuss all aspects of the design process of the braking and throttle system of the 2015 Zips Baja car. This process includes several steps and considerations such as design goals, system …

Senior Design: Kong Toy Instruction-Manual Insertion, Rachael L. Innocenzi, Ashley N. Cuthbert, Marianna R. Smith

Williams Honors College, Honors Research Projects

The team’s goal is to design and test a prototype and procedure that will automate the insertion of the Kong toy instructions into the cardboard packaging. This automation will increase the speed at which the product is packaged and will serve as an aid to workers with limited dexterity who find the task cumbersome.

Senior Design: Kong Toy Instruction-Manual Insertion, Marianna R. Smith, Rachael L. Innocenzi, Ashley N. Cuthbert

Williams Honors College, Honors Research Projects

The team’s goal is to design and test a prototype and procedure that will automate the insertion of the

Kong toy instructions into the cardboard packaging. This automation will increase the speed at which

the product is packaged and will serve as an aid to workers with limited dexterity who find the task

cumbersome.

Senior Design:Kong Toy Instruction-Manual Insertion, Ashley N. Cuthbert, Rachael L. Innocenzi, Marianna R. Smith

Williams Honors College, Honors Research Projects

The team’s goal is to design and test a prototype and procedure that will automate the insertion of the Kong toy instructions into the cardboard packaging. This automation will increase the speed at which the product is packaged and will serve as an aid to workers with limited dexterity who find the task cumbersome.