Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 3 of 3

Full-Text Articles in Mechanical Engineering

On The Nature Of The Electrochemically Synthesized Hard Fe-0.96 Mass Pct C Alloy Film Dec 2002

On The Nature Of The Electrochemically Synthesized Hard Fe-0.96 Mass Pct C Alloy Film

A.S. Md Abdul Haseeb

A hard Fe-0.96 mass pet C alloy with a hardness value of 810 HV has been electrochemically synthesized from a ferrous sulfate bath containing a small amount of citric acid and L-ascorbic acid. The nature of the alloy has been investigated by a number of techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Mössbauer spectroscopy, differential scanning calorimetry (DSC), and magnetic measurements. The decomposition behavior of the alloy is also studied and compared with that of thermally prepared martensite. It has been found that the electrochemically deposited Fe-C alloy exists ...


On The Nature Of The Electrochemically Synthesized Hard Fe-0.96 Mass Pct C Alloy Film Nov 2002

On The Nature Of The Electrochemically Synthesized Hard Fe-0.96 Mass Pct C Alloy Film

A.S. Md Abdul Haseeb

A hard Fe-0.96 mass pet C alloy with a hardness value of 810 HV has been electrochemically synthesized from a ferrous sulfate bath containing a small amount of citric acid and L-ascorbic acid. The nature of the alloy has been investigated by a number of techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Mössbauer spectroscopy, differential scanning calorimetry (DSC), and magnetic measurements. The decomposition behavior of the alloy is also studied and compared with that of thermally prepared martensite. It has been found that the electrochemically deposited Fe-C alloy exists ...


Nanofatigue Studies Of Ultrathin Hard Carbon Overcoats Used In Magnetic Storage Devices, Xiaodong Li, Bharat Bhushan May 2002

Nanofatigue Studies Of Ultrathin Hard Carbon Overcoats Used In Magnetic Storage Devices, Xiaodong Li, Bharat Bhushan

Faculty Publications

A technique to perform nanofatigue experiments was developed. This technique utilizes a depth-sensing nanoindenter with harmonic force. The nanofatigue behavior of 20 nm thick amorphous carbon coatings was studied. The contact stiffness was monitored continuously throughout the test. The abrupt decrease in the contact stiffness indicates fatigue damage has occurred. The critical load amplitude, below which no fatigue damage occurs, was identified. It was found that the filtered cathodic arc coating exhibits longer fatigue life than a direct ion beam coating. Failure mechanisms of the coatings during fatigue are also discussed in conjunction with the hardness,elastic modulus, and fracture ...