Mechanical Engineering Commons^™

Development Of An Optoelectronic Holographic Platform For Otolaryngology Applications, Ellery Harrington, Ivo Dobrev, Nikhil Bapat, Jorge Flores, Cosme Furlong, John Rosowski, Jeffery Cheng, Christopher Scarpino, Michael Ravicz

Ivo Dobrev

No abstract provided.

Silicon Oxide Micromodule Capacitors, W. B. Nowak, J. J. O'Connor

Welville B. Nowak

Silicon oxide capacitors have been developed on micromodule wafers (0.310-in. sq. with three termination notches per side). Each microelement contains 1, 2, 3, or 4 capacitors with values of 1120 and 560, 180, 100 and 68 pf per capacitor, respectively. The 1120 pf capacitor is double layered. In addition to the general requirements of microelements and micromodules, some of the more important specifications these capacitors must meet are: dissipation factor (DF) not exceeding 0.015, insulation resistance (IR) at 50 volts exceeding 10,000 megohms (25°C) and 750 megohms (125°c), 50 WVDC and 150 volts dielectric withstanding voltage (DWV), Δ C not …

Structural And Magnetic Characterization Of Amorphous Gd₂Fe₁₄B Thin Films, S. E. Bushnell, P. C. Dorsey, W. B. Nowak, C. Vittoria

Welville B. Nowak

Thin amorphous films of nominal composition Gd₂Fe₁₄B were fabricated on Si (100) substrates using ion‐beam sputtering for the purpose of establishing their structural and magnetic properties at room temperature. X‐ray‐diffraction scans performed on as‐deposited and annealed films revealed an amorphous structure. The as‐deposited saturation magnetization was found to be 8101 G at room temperature suggesting ferrimagnetic ordering with anti‐parallel coupling similar to other heavy rare earth‐transition metal systems. Results from in‐plane and perpendicular ferromagnetic resonance experiments conducted at 9.108 GHz showed the films to be inhomogeneous. This was evident from the presence of two in‐plane resonance lines and spin‐wave spectra …

The Measurement Of Magnetostriction Constants Of Thin Films Using Planar Microwave Devices And Ferromagnetic Resonance, S. E. Bushnell, W. B. Nowak, S. A. Oliver, C. Vittoria

Welville B. Nowak

In this paper we introduce a new technique for measuring the saturation magnetostriction constant (λs) for isotropic polycrystalline thin films. The technique makes use of nonresonant planar microwave structures together with a novel stressing mechanism to induce a shift in the resonant field of a magnetic thin film as measured by a ferromagnetic resonance (FMR) experiment. Measurement of the shift induced by a uniaxial stress allows for determination of λs via a magnetic resonance analysis. Either a slotline device or coplanar waveguide (CPW) was used as the source of the microwave excitation field depending upon the orientation of the dc …

Magnetic And Structural Investigation Of Heat Treated Ion Beam Sputtered Amorphous Co₇₄Fe₆B₁₅Si₅ Films, V. G. Harris, S. A. Oliver, W. B. Nowak, C. Vittoria, R. J. Culbertson, W. T. Elam, K. H. Kim

Welville B. Nowak

As-deposited and annealed specimens of ion beam sputtered amorphous Co₇₄Fe₆B₁₅Si₅ thin films were examined to explore the correlation between changes in magnetic properties and atomic structure. Specimens were characterized magnetically, by traditional ac and dc techniques and structurally, via conversion-electron extended x-ray absorption fine structure analysis. Results show significant ordering of the higher order atomic shells around the transition metal ions well below the crystallization temperature. This ordering evolves into a body- centered-cubic configuration around both the Co and Fe ions. Increases in nearest neighbor peak positions in the EXAFS Fourier transforms were observed to correlate with increasing annealing temperatures. …

Magnetic And Microwave Properties Of Ion-Beam-Sputtered Amorphous Feₓco₈₀₋ₓb₁₅Si₅ Films, V. G. Harris, S. A. Oliver, W. B. Nowak, C. Vittoria

Welville B. Nowak

Magnetically soft amorphous films of FeₓCo₈₀₋ₓB₁₅Si₅ (x = 0, 6, 23, 40, 70, 80) were ion beam sputter deposited onto fused quartz for static and microwave magnetic characterization. Films ranged in thickness from 220 to 260 nm and were deposited at rates of 0.1-0.2 nm/s. Saturation magnetization, coercivity, and loop squareness values were extracted from hysteresis loops generated by a vibrating sample magnetometer. Ferromagnetic resonance measurements were taken using a 9.5-GHz cavity with the applied magnetic field both parallel and perpendicular to the plane of the film, yielding values for the g factor, anisotropy field, effective magnetization, and linewidth. Well …

Effects Of Boron Implantation In Films Of Iron-Nickel, J. Ryu, K. Castell, W. Nowak, C. Vittoria

Welville B. Nowak

We have implanted boron ions into films of Fe-Ni alloy composition. A homogeneous distribution of boron was determined from the sputter Auger analysis with a concentration of 18% and 34% for low- and high-dose implantation, respectively. The resistivity of film was increased by a factor of 2 and 4 as a result of low- and high-dose implantation, respectively. The magnetic properties of these films are studied as a function of annealing temperature by using FMR measurements. Both the uniaxial anisotropy field and FMR linewidth are dramatically decreased as a result of annealing at elevated temperatures. The changes of effective magnetization …

Pre-Eruption Pressure, Temperature And Volatile Content Of Rhyolite Magma From The 1650 Ad Eruption Of Kolumbo Submarine Volcano, Greece, K. Cantner, S. Carey, H. Sigurdsson, G. Vougioukalakis, P. Nomikou, C. Roman, K. Bell, M. Alexandri

Christopher N. Roman

Biotite-bearing, crystal-poor rhyolite magma was the predominant magma type discharged during the 1650 AD explosive eruption of Kolumbo submarine volcano, Greece. The eruption produced thick sequences of pumice deposits (~100 m) in the upper crater walls of the volcano, but also led to the formation of extensive pumice rafts that were dispersed throughout the southern Aegean Sea, and subaerial tephra fallout as far east as Turkey. Preliminary estimates of pre-eruption volatile contents have been determined using the volatile-by-difference method on plagioclase-hosted melt inclusions and yield an average value of 6.0 wt.%. This corresponds to a pre-eruption storage pressure of 180 …

Hydrogen Production From Methane Under The Interaction Of Catalytic Partial Oxidation, Water Gas Shift Reaction And Heat Recovery, Wei-Hsin Chen

Wei-Hsin Chen

No abstract provided.

Water Turbine, Vijaya Krushna Varma Mr

VIJAYA KRUSHNA VARMA Mr

Varma designed ultra modern and high efficiency turbines which can use gas, steam or fuels as feed to produce electricity or mechanical work for wide range of usages and applications in industries or at work sites. Varma turbine engines can be used in all types of vehicles. These turbines can also be used in aircraft, ships, battle tanks, dredgers, mining equipment, earth moving machines etc, Salient features of Varma Turbines. 1. Varma turbines are simple in design, easy to manufacture, easy to operate and maintain. 2. Varma turbines are less expensive. 3. Varma turbines have a great power to weight …

Tunable Band Gaps In Bilayer Graphene-Bn Heterostructures, Ashwin Ramasubramaniam, Doron Naveh, Elias Towe

Ashwin Ramasubramaniam

Thermodynamic Analysis Of Hydrogen Production From Methane Via Autothermal Reforming And Partial Oxidation Followed By Water Gas Shift Reaction, Wei-Hsin Chen

Wei-Hsin Chen

Bridging The Gap Between The Industrial Environment And The Classroom Via Project-Based Learning, Michael W. Martin

Michael W Martin

Recent engineering education research has concluded that most engineering curricula do not promote attainment of many characteristics desired in practicing engineers. Methods to attain these characteristics include both project-based learning (PBL) and simulation of workplace situations in the educational environment. The presenter will outline the use of both PBL and workplace simulation through the implementation of a semester-long project in a senior-level Data Acquisition course taught out of the Department of Engineering Technology at Northern Michigan University. A typical undergraduate experimental analysis or data acquisition course will review topics including; sensoring, hardware requirements, testing techniques, computer integration, software use, and …

A Bi-Directional Supply Chain Optimization Model For Reverse Logistics, Surendra M. Gupta, Pitipong Veerakamolmal

Surendra M. Gupta

This paper focuses an supply chain optimization system for reverse logistics. The solution approach employs an adaptation of the Materials Requirements Planning (MRP) technique, termed as components requirements planning, to determine the number of components needed to remanufacture products in each time period throughout the planning horizon.

Greedy Algorithm For Disassembly Line Scheduling, Seamus M. Mcgovern, Surendra M. Gupta

Surendra M. Gupta

Remanufacturing, recycling, and disposal recovery operations require the performance of disassembly activities. The disassembly line is the best choice for automated disassembly of returned products, however, finding the optimal balance is computationally intensive with exhaustive search quickly becoming prohibitively large. In this paper, a greedy algorithm is presented for obtaining optimal or near-optimal solutions to the disassembly line balancing problem. The greedy algorithm is a first-fit decreasing algorithm further enhanced to preserve precedence relationships. The algorithm seeks to minimize the number of workstations while accounting for hazardous and high demand components. A hill-climbing heuristic is then developed to balance the …

A Multi-Phase Fuzzy Logic Approach To Strategic Planning Of A Reverse Supply Chain Network, Kishore K. Pochampally, Surendra M. Gupta

Surendra M. Gupta

Strategic planning (also called designing) is a challenging aspect of a reverse supply chain network. To effectively satisfy drivers such as profitability, environmental regulations, and asset recovery, only the most economical used products must be reprocessed in only the recovery facilities that have the potential to efficiently reprocess them. Due to uncertainties in supply, quality, and reprocessing times of used products, the cost-benefit function in the literature that selects the most economical product to reprocess from a set of used products is not appropriate for direct adoption. Moreover, due to the same uncertainties, any traditional forward supply chain approach to …

A Business-Mapping Approach To Multi-Criteria Group Selection Of Collection Centers And Recovery Facilities, Kishore Pochampally, Surendra Gupta

Surendra M. Gupta

For a prospective reverse supply chain to operate efficiently, the designing of that chain must involve selection of collection centers and recovery facilities that have sufficient success potentials. These success potentials depend heavily on the participation (in the reverse supply chain) of three important groups that have multiple, conflicting, and incommensurate goals. Therefore, the potentials must be evaluated based on the maximized consensus among the three groups, viz., (i) Consumers whose primary concern is convenience, (ii) Local government officials whose primary concern is environmental consciousness, and (iii) Supply chain company executives whose primary concern is profit. In this paper, we …

Pricing Of End-Of-Life Items With Obsolescence, Srikanth Vadde, Sagar V. Kamarthi, Surendra M. Gupta

Surendra M. Gupta

Variability in the inflow of end-of-life (EOL) products and fluctuating inventory levels often make the processing of EOL products an economically risky operation for product recovery facilities (PRFs). Choosing an appropriate pricing policy can enhance the performance of PRFs by methodically clearing their inventory and increasing profits. This work presents two pricing models to counter the prospect of product obsolescence that can happen either gradually or suddenly. Product obsolescence can cause demand drop and inventory pile up, both of which could dent the revenues of PRFs. In the first model, gradual obsolescence and environmental regulations that limit the disposal quantity …

Product Recovery Using A Disassembly Line : Challenges And Solution, Surendra M. Gupta, Askiner Gungor

Surendra M. Gupta

Disassembly plays an important role in product recovery by allowing selective separation of desired parts and materials. The disassembly line is the best choice for automated disassembly of returned products, a feature that will be essential in the future. It is, therefore, important that the disassembly line be designed and balanced so that it works as efficiently as possible. In this paper, the authors address the disassembly line balancing problem and the challenges that come with it.

Disassembly Process Planning Using Petri Nets, Kendra E. Moore, Askiner Gungor, Surendra M. Gupta

Surendra M. Gupta

We generate a disassembly PN (DPN) from a disassembly precedence matrix. The resulting DPN can be analyzed using the reachability tree method to generate all feasible disassembly process plans (DPPs), and cost functions can be used to determine the optimal DPP. Since generating the reachability tree is NP-complete, we develop a heuristic algorithm to limit the size of the reachability tree. The algorithm employs multihypothesis search to dynamically explore the v likeliest lowest cost branches of the tree, in order to identify near-optimal DPPs. The cost function incorporates tool changes, changes in direction movement, and individual part characteristics (e.g., hazardous). …

Determining Optimum And Suboptimum Disassembly Sequences With An Application To A Cell Phone, A.J.D. (Fred) Lambert, Surendra M. Gupta

Surendra M. Gupta

We study the disassembly process of a moderately complex consumer product (cell phone) consisting of 25 components. The investigation involves a heuristically solved disassembly line balancing problem and the determination of an appropriate disassembly sequence influenced by sequence-dependent costs, which is based on a novel combination of exact and heuristic algorithms. The issue of generating various suboptimum solutions to cope with multiple optimization criteria is also discussed.

Design Of An Integrated Component Recovery System, Pitipong Veerakamolmal, Surendra Gupta

Surendra M. Gupta

This paper presents a two-stage disassembly and retrieval system that provides a unique solution for planning selective component recovery from products. The solution approach uses a process sequencing technique to schedule the operations in both stages to optimize the operational makespan.

Planning An Efficient Closed-Loop Supply Chain Network : A Unified Single Phase Approach, Satish Nukala, Surendra M. Gupta

Surendra M. Gupta

No abstract provided.

Efficient Design And Effective Marketing Of A Reverse Supply Chain : A Fuzzy Logic Approach, Kishore K. Pochampally, Surendra M. Gupta

Surendra M. Gupta

A two-phase mathematical programming approach to efficiently design a reverse supply chain is proposed, as follows: in phase I, a fuzzy cost-benefit function is formulated to perform a multi-criteria economic analysis for selecting the most economical product to re-process, from a set of candidate used products; in phase II, an integer goal programming model that not only identifies potential recovery facilities but also leads to transportation of the right mix and quantities of products (used as well as re-processed) across the supply chain, is formulated. Since the success of a reverse supply chain depends on its marketing strategy as well …

A Combinatorial Cost-Benefit Analysis Methodology For Designing Modular Electronic Products For The Environment, Pitipong Veerakamolmal, Surendra Gupta

Surendra M. Gupta

This paper presents a technique to analyze the efficiency of designing electronic products for the environment. The efficiency of each design is indicated using a Design for Disassembly Index (DfDI). DfDI uses a disassembly tree (DT) which relies on the product's bill of materials as its structural blueprint. DfDI can be used to compare the efficiency among alternative designs, identifying the best alternative for a product retirement plan. In addition, the index offers designers with an important measure to help improve future products.

Disassembly Petri Net Generation In The Presence Of Xor Precedence Relationships, K. E. Moore, Askiner Gungor, Surendra M. Gupta

Surendra M. Gupta

A disassembly process plan (DPP) is a sequence of disassembly tasks which begins with a product to be disassembled and terminates in a state where all the parts of interest are disconnected. Disassembly process planning is critical for minimizing the resources invested in disassembly and maximizing the level of automation of the disassembly process and the quality of the parts (or materials) recovered. In this paper, we propose an algorithm which automatically generates a disassembly PN (DPN) from a geometrically-based disassembly precedence matrix (DPM). This algorithm can be used to generate DPPs for products which contain simple AND, OR, complex …

A Multi-Phase Mathematical Programming Approach To Strategic Planning Of An Efficient Reverse Supply Chain Network, Kishore Pochampally, Surendra Gupta

Surendra M. Gupta

Strategic planning of a supply chain network is one of the most challenging aspects of reverse logistics. To effectively satisfy drivers such as profitability, environmental regulations and asset recovery, only the most economical used products must be reprocessed in only the recovery facilities that have the potential to efficiently reprocess them. Due to uncertainties in supply, quality and reprocessing times of used-products, the cost-benefit function in the literature that selects the most economical product to reprocess from a set of used-products is not appropriate for direct adoption. Moreover, due to the same uncertainties, any traditional forward supply chain approach to …

Disassembly-To-Order System Using Linear Physical Programming, Elif Kongar, Surendra M. Gupta

Surendra M. Gupta

One of the most responsible ways of processing end-of-life (EOL) products is to minimize their disposal to landfills by reusing, remanufacturing and/or recycling them. Often, this necessitates a certain level of disassembly. It is therefore necessary to plan disassembly processing efficiently so as to minimize costs and the amount of disposal as well as to maximize reuse, remanufacturing and recycling. In this paper, we present a disassembly-to-order system to determine the number of EOL products to process to fulfill a certain demand for products, parts and/or materials under a variety of objectives and constraints using a newly developed decision tool, …

Structural And Mechanical Properties Of Nanostructured Tio2 Thin Films Deposited By Rf Sputtering

A.S. Md Abdul Haseeb

This study mainly aims to evaluate the effects of substrate temperatures on the mechanical properties of TiO2 thin films deposited on glass substrates by radio-frequency (RF) magnetron sputtering. All titania films possess anatase structure having a nodular morphology. AES results reveal that Si and Na ions from glass diffuse into TiO2 films at higher substrate temperatures. Micro-scratch and wear tests were conducted to evaluate their mechanical and tribological properties. The adhesion critical loads of TiO2 films deposited at room temperature, 200 and 300°C are found to be 1.51, 1.54 and 1.08N, respectively. Scratch hardness also increases from 11.5 to 13.6GPa …

Balancing Limiting Factors & Economic Drivers For Sustainable Midwestern Us Agricultural Residue Feedstock Supplies, Wally W. Wilhelm, J. Richard Hess, Douglas L. Karlen, Jane M. F. Johnson, David J. Muth Jr., John M. Baker, Hero T. Gollany, Jeff M. Novak, Diane E. Scott, Gary E. Varvel

Douglas L Karlen

Advanced biofuels will be developed using cellulosic feedstock rather than grain or oilseed crops that can also be used for food and feed. To be sustainable, these new agronomic production systems must be economically viable without degrading the soil and other natural resources. This review examines six agronomic factors that collectively define many of the limits and opportunities for harvesting crop residue for biofuel feedstock in the midwestern United States. The limiting factors include soil organic carbon, wind and water erosion, plant nutrient balance, soil water and temperature dynamics, soil compaction, and off-site environmental impacts. These are discussed in relationship …