Mechanical Engineering Commons^™

Scheduling And Cooperative Control Of Electric Vehicles' Charging At Highway Service Stations, Florida Solar Energy Center, Azwirman Gusrialdi

FSEC Energy Research Center®

This is a re-print version of a publication for the 53rd IEEE Conference on Decision and Control, Los Angeles, California, USA, December 15-17, 2014Due to their limited ranges, electric vehicles (EVs)need to be periodically charged during their long-distance travels on a highway. Compared to the fossil-fuel powered vehicles, the charging of a single EV takes much more time(up to 30 mins versus 2 mins). As the number of EVs on highways increases, adequate charging infrastructure needs to be put in place. Nonetheless waiting times for EVs to get charged at service stations could still vary significantly unless an appropriate scheduling …

Phased Retrofits In Existing Homes In Florida Phase I: Shallow And Deep Retrofits, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

The U.S. Department of Energy (DOE) Building America program, in collaboration with Florida Power & Light (FPL), is conducting a phased residential energy-efficiency retrofit program. This research seeks to establish impacts on annual energy and peak energy reductions from the technologies applied at two levels of retrofit ' shallow and deep, with savings levels approaching the Building America program goals of reducing whole-house energy use by 40%. Under the Phased Deep Retrofit (PDR) project, we have installed phased, energy-efficiency retrofits in a sample of 56 existing, all-electric homes. End-use savings and economic evaluation results from the phased measure packages and …

Second Semi-Annual Program Progress Performance Report For University Transportation Systems, Florida Solar Energy Center, David Block

FSEC Energy Research Center®

The Electric Vehicle Transportation Center (EVTC) supports the U.S. Department of Transportation's strategic goal of planning for near-term integration of alternative fuel vehicles as a means to build a sustainable transportation system. The project will evaluate technologies, standards and policies to ensure seamless integration of electric vehicles (EVs) into a complex transportation network and electricity grid. The EVTC will bridge the gap between deployment of electric vehicles and the traditional transportation system.

The EVTC's goals were described in detail in the previous Program Progress Performance Report. These goals have not changed significantly and this report provides updates to each of …

Electric Vehicle Life Cycle Cost Assessment, Florida Solar Energy Center, Richard Raustad

FSEC Energy Research Center®

The Electric Vehicle Transportation Center (EVTC) has developed a life cycle cost (LCC) model to include all reasonable costs associated with vehicle ownership over a 5, 10, 15, or 20-year period. The EVTC LCC model compares ownership costs of conventional vehicles to plug-in hybrid and battery electric vehicles. Internal combustion engines using gasoline, ethanol, or diesel are considered. The analysis includes costs for tires, insurance and maintenance, federal incentives, state tax, dealership fee, and financed interest payments. Traction battery replacement costs are difficult to ascertain yet are included to investigate their impact on overall life cycle costs. Economic factors used …

An Analysis Of Fuel Cell Vehicle Models By Major Automakers, Florida Solar Energy Center, Nan Qin

FSEC Energy Research Center®

Fuel cell electric vehicles (FCEVs) use hydrogen as fuel and exhaust only water. They provide driving ranges and fueling times comparable to gasoline vehicles. Despite the advantages, FCEVs have been in and out of spot light of the auto industry for the past several decades. The information on the development of fuel cell vehicles by major automakers is disparate. This report systematically examined the technical developments of FCEVs since the introduction of the first lab-based fuel cell vehicle in 1966. It included an overview of 117 FCEV models from 31 automakers. It should help the stakeholders to gain an insight …

Achieving Challenge Home In Affordable Housing In The Hot-Humid Climate, Florida Solar Energy Center, David Beal

FSEC Energy Research Center®

No abstract provided.

Modeling Financial Markets Using Concepts From Mechanical Vibrations And Mass-Spring Systems, Michael Gandia

HIM 1990-2015

This thesis describes a method of modeling financial markets by utilizing concepts from mechanical vibration. The models developed represent multi-degree of freedom, mass-spring systems. The economic principles that drive the design are supply and demand, which act as springs, and shareholders, which act as masses. The primary assumption of this research is that events cannot be predicted but the responses to those events can be. In other words, economic stimuli create responses to a stock’s price that is predictable, repeatable and scientific. The approach to determining the behavior of various financial markets encompassed techniques such as Fast Fourier Transform and …

Effects Of Relaxed Assumptions On The State Switching Technique, Stephen Ilardi

HIM 1990-2015

This thesis explores the effects of two assumptions commonly used in mathematical models related to a piezoelectric damping method known as State Switching. The technique relies on changing the stiffness state of a piezoelectric patch through control of the electrical boundary conditions. The transition between stiffness states is assumed to occur instantaneously and in concurrence with the switch event. In actuality, the transition will occur over a finite time and will trail behind the switch event by a finite time. For these assumptions to be valid, the effects of switch duration and delay on the performance of the State Switching …

Cost Effectiveness Of 2015 Iecc Compliance Using The Hers Index, Florida Solar Energy Center, Philip Fairey

FSEC Energy Research Center®

The EnergyGauge HERS software tool is used to examine the 2012 IECC Standard Reference Design (IECC SRD) configuration for three-bedroom, one-story 2000 ft² and three-bedroom, two-story 2,400 ft² single-family homes in sixteen representative U.S. cities. The energy use of the 2012 SRD homes is compared against the energy use of homes complying with the 2015 IECC using the ERI compliance method. HERS simulations for each home are conducted for both a best case home orientation and a worst case home orientation. Improvements to the 2012 IECC SRD homes are made such that the HERS Index for the homes …

Investigation Of Potential Benefits Of Revising Exception 1 Under Florida Building Code, Energy Conservation, Section 101.4.7.1.1 Duct Sealing Upon Equipment Replacement, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

Section 101.4.7.1.1, Duct sealing upon equipment replacement (Mandatory), of the 2012 Supplement to the Florida Building Code, Energy Conservation went into effect briefly in 2013. The new section required sealing of accessible ducts at the time of HVAC equipment replacement. Exception #1 however, eliminates the requirement for ducts in conditioned space, and by doing so, effectively eliminates the sealing requirement for building cavities in conditioned space that are used as air distribution paths. However, test results show that these building cavities are often connected to adjacent unconditioned spaces, in effect they are not really in the conditioned space because they …

Initial Testing Of A Unitary Hvac System Advanced Control Module, Florida Solar Energy Center, Richard Raustad

FSEC Energy Research Center®

Testing of a unitary HVAC system advanced control module and the results.

A Review Of Home Airtightness And Ventilation Approaches For Florida Building Commission Research, Florida Solar Energy Center, Jeffrey Sonne

FSEC Energy Research Center®

This research project was conducted with the primary objectives of 1) providing a literature review, examination of experimental data, and calculations of energy impacts of using or not using various types of ventilation systems and 2) developing alternative approaches to achieving acceptable levels of ventilation while avoiding the risks associated with super-tight home enclosures and potential mechanical system failures. The report includes discussions of pertinent airtightness and mechanical ventilation topics and provides recommended ventilation practices for Florida.

Assessment Of Energy Efficient Methods Of Indoor Humidity Control For Florida Building Commission Research, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

This research project was conducted with the primary objective to identify approaches and technologies which can achieve energy-efficient latent cooling in light of code requirements that may increase overall ventilation rates in new Florida homes. This report covers the work of two primary efforts of completing a literature review and testing a few space conditioning methods in a mechanically ventilated building. Results from a literature review provide a list of various approaches to managing the latent load in homes with emphasis on energy efficiency and cost-effectiveness. In addition to a literature review, controlled experiments using four different approaches to space …

Flexible Residential Test Facility: Impact Of Infiltration And Ventilation On Measured Cooling Season Energy And Moisture Levels, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

Air infiltration and ventilation in residential buildings is a very large part of the heating loads, but empirical data regarding the impact on space cooling has been lacking. Moreover, there has been little data on how building tightness might relate to building interior moisture levels in homes in a hot and humid climate. To address this need, BA-PIRC has conducted research to assess the moisture and cooling load impacts of airtightness and mechanical ventilation in two identical laboratory homes in the hot-humid climate over the cooling season.

The Tlc Method For Modeling Creep Deformation And Rupture, David May

HIM 1990-2015

This thesis describes a novel new method, termed the Tangent-Line-Chord (TLC) method, that can be used to more efficiently model creep deformation dominated by the tertiary regime. Creep deformation is a widespread mechanical mode of failure found in high-stress and temperature mechanical systems. To accurately simulate creep and its effect on structures, researchers utilize finite element analysis (FEA). General purpose FEA packages require extensive amounts of time and computer resources to simulate creep softening in components because of the large deformation rates that continuously evolve. The goal of this research is to employ multi-regime creep models, such as the Kachanov-Rabotnov …

Scalable Nano Particle Production Of Low Bioavailability Pharmaceuticals For Augmented Aqueous Solubility, Aaron Madden

HIM 1990-2015

The billion dollar pharmaceutical research and development pipeline suffers greatly from high attrition rates of novel therapeutic compounds within pre-clinical and clinical trials. Poor bioavailability in many new drugs, originating in the various methodologies of high throughput screening, may explain part of these growing failure rates. One interpretation of this phenomenon relies on bioavailability's correlation with aqueous solubility; much modern processing allows chemicals to fully develop without touching water, yielding upwards of 90% of new chemical entities practically insoluble in aqueous media. Thus, one approach to alleviating bioavailability and potentially clinical attrition rates necessitates augmented aqueous solubility. The amorphous nanoparticle …

Semi-Annual Program Progress Performance Report For University Transportation Systems, Florida Solar Energy Center, David Block

FSEC Energy Research Center®

The Electric Vehicle Transportation Center's (EVTC) vision is to transform the country's transportation network into a fully integrated "smart" electric vehicle deployment system coupled with a "smart" electric grid achieved with maximum efficiency and minimum time and disruption.

To accomplish the EVTC vision, the Center's goals are to serve as the focal point for the U.S. Department of Transportation's strategic goal of planning for near-term integration of alternative fuel vehicles as a means to build a sustainable transportation system. The project will evaluate technologies, standards and policies to ensure seamless integration of EVs into a complex electricity grid and transportation …

Technical And Business Solutions For Zero Net-Energy Ready And Zero Net-Energy Homes In The Hot Humid Climate, Florida Solar Energy Center, Eric Martin

FSEC Energy Research Center®

The Department of Energy's Challenge Home program provides a standardized platform for application and marketing of Building America innovations in new residential construction and is intended to facilitate delivery of zero net-energy ready and zero net-energy homes that also meet goals for durability, quality, affordability, and comfort. The Building America Partnership for Improved Residential Construction, one of the Building America research team leads, has partnered with several builders in the hot-humid climate, as they work through the process of adopting Challenge Home. This paper serves to identify viable technical pathways to meeting the Challenge Home criteria in this region and …

Hydrogen Fueling Stations Infrastructure, Florida Solar Energy Center, Nan Qin

FSEC Energy Research Center®

Fuel Cell Electric Vehicles (FCEVs) can provide customers with the benefits of low to zero greenhouse gas emissions, high performance, and comfort without compromising range and refill time. With three major automakers (Honda, Hyundai, and Toyota) planning to introduce consumer FCEVs by the end of 2015, FCEVs will play an increasingly important role in the electric vehicle arena. Building hydrogen fueling infrastructure has been identified as a major obstacle in FCEV commercialization. This report is part of an ongoing effort within an Electric Vehicle Transportation Center (EVTC) project: "Fuel Cell Vehicle Technologies, Infrastructure and Requirements." This report is based on …

Energy And Peak Power Reduction From Air Misting Products Applied To Commercial Condensing Units In Hot And Humid Climates, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

A proprietary research project was conducted to evaluate the potential annual and peak energy reduction resulting from the addition of a water misting system applied to supermarket condenser coils in the Florida Power and Light service territory. Tests were performed to evaluate the performance of a mist system under various outdoor conditions over an eight-month period in a hot and humid climate zone. The project measured an average of 2.8% percentage energy savings and average 3.2% utility peak demand reduction. The report discusses why hot and humid climates can expect much lower savings compared to hot and arid climates. One …

Comparative Performance Analysis: Hers Index Score Dependencies Related To Home Geometries And Operating Assumptions, Florida Solar Energy Center, Philip Fairey

FSEC Energy Research Center®

EnergyGauge USA v.3.1.02 is used examine the impact of geometry and operating conditions on comparative simulation analysis techniques that are used to evaluate home energy performance with respect to a standardized reference case. A cohort of homes is simulated using the HERS Index scoring system in 15 U.S. cities that are representative of the 8 International Energy Conservation Code (IECC) climate zones. All of the homes are configured to have the thermal envelope characteristics specified by Table R402.1.1 of the 2012 IECC. All homes are also configured to meet all other mandatory requirements of the 2012 IECC, including 75% high …

Impact Of Residential Mechanical Ventilation On Energy Cost And Humidity Control, Florida Solar Energy Center, Eric Martin

FSEC Energy Research Center®

The DOE Building America program has been conducting research leading to cost effective high performance homes since the early 1990's. Optimizing whole house mechanical ventilation as part of the program's systems engineered approach to constructing housing has been an important subject of the program's research. Ventilation in residential buildings is one component of an effective, comprehensive strategy for creation and maintenance of a comfortable and healthy indoor air environment. The study described in this white paper is based on building energy modeling with an important focus on the indoor humidity impacts of ventilation. The modeling tools used were EnergyPlus version …

Computational Fluid Dynamics Uncertainty Analysis For Payload Fairing Spacecraft Environmental Control Systems, Curtis Groves

Electronic Theses and Dissertations

Spacecraft thermal protection systems are at risk of being damaged due to airflow produced from Environmental Control Systems. There are inherent uncertainties and errors associated with using Computational Fluid Dynamics to predict the airflow field around a spacecraft from the Environmental Control System. This paper describes an approach to quantify the uncertainty in using Computational Fluid Dynamics to predict airflow speeds around an encapsulated spacecraft without the use of test data. Quantifying the uncertainty in analytical predictions is imperative to the success of any simulation-based product. The method could provide an alternative to traditional “validation by test only” mentality. This …

In-Situ Synchrotron Studies Of Turbine Blade Thermal Barrier Coatings Under Extreme Environments, Kevin Knipe

Electronic Theses and Dissertations

Thermal Barrier Coatings have been used for decades to impose a thermal gradient between the hot combustion gases and the underlying superalloy substrate in engine turbine blades. Yttria Stabilized Zirconia (YSZ) is an industry standard high temperature ceramic for turbine applications. The protective coating is adhered to the substrate using a nickel based alloy bond coat. Through exposure to high temperature, a Thermally Grown Oxide (TGO) layer develops at the bond coat-YSZ interface. Large residual stresses develop in these layers due to thermal expansion mismatch that occurs during cool down from high temperature spraying and cyclic operating conditions. Despite their …

Bio-Inspired Attitude Control Of Micro Air Vehicles Using Rich Information From Airflow Sensors, He Shen

Electronic Theses and Dissertations

Biological phenomena found in nature can be learned and customized to obtain innovative engineering solutions. In recent years, biologists found that birds and bats use their mechanoreceptors to sense the airflow information and use this information directly to achieve their agile flight performance. Inspired by this phenomenon, an attitude control system for micro air vehicles using rich amount of airflow sensor information is proposed, designed and tested. The dissertation discusses our research findings on this topic. First, we quantified the errors between the calculated and measured lift and moment profiles using a limited number of micro pressure sensors over a …

Synchrotron X-Ray Diffraction And Piezospectroscopy Used For The Investigation Of Individual Mechanical Effects From Environmental Contaminants And Oxide Layer Undulations In Thermal Barrier Coatings, Sanna Siddiqui

Electronic Theses and Dissertations

The durability of Thermal Barrier Coatings (TBCs) used on the turbine blades of aircraft and power generation engines has been known to be affected by sand particle ingression comprised of Calcium-Magnesium-Alumina-Silicate (CMAS). Previous studies have shown that these effects present themselves through variations in the thermomechanical and thermochemical properties of the coating. This study investigated the impact of CMAS ingression on the Yttria Stabilized Zirconia Topcoat (YSZ) and Thermally Grown Oxide (TGO) strain in sprayed Thermal Barrier Coating (TBC) samples of varying porosity with and without CMAS ingression. In-Situ Synchrotron X-ray Diffraction measurements were taken on the sample under thermal …

Nanocomposite Coating Mechanics Via Piezospectroscopy, Gregory Freihofer

Electronic Theses and Dissertations

Coatings utilizing the piezospectroscopic (PS) effect of alpha alumina could enable on the fly stress sensing for structural health monitoring applications. While the PS effect has been historically utilized in several applications, here by distributing the photo-luminescent material in nanoparticle form within a matrix, a stress sensing coating is created. Parallel to developing PS coatings for stress sensing, the multi-scale mechanics associated with the observed PS response of nanocomposites and their coatings has been applied to give material property measurements, providing an understanding of particle reinforced composite behavior. Understanding the nanoparticle-coating-substrate mechanics is essential to interpreting the spectral shifts for …

Design And Development Of Heterogenous Combustion Systems For Lean Burn Applications, Anthony Terracciano

Electronic Theses and Dissertations

Combustion with a high surface area continuous solid immersed within the flame, referred to as combustion in porous media, is an innovative approach to combustion as the solid within the flame acts as an internal regenerator distributing heat from the combustion byproducts to the upstream reactants. By including the solid structure, radiative energy extraction becomes viable, while the solid enables a vast extension of flammability limits compared to conventional flames, while offering dramatically reduced emissions of NOx and CO, and dramatically increased burning velocities. Efforts documented within are used for the development of a streamlined set of design principles, and …

A Lab-Scale Experimental Framework For Studying The Phenomenon Of Autorotation, Sigitas Rimkus

Electronic Theses and Dissertations

While wind energy has emerged as a popular source of renewable energy, the traditional wind turbine has an inherent limitation, namely that it only generates power in the presence of sufficiently high and consistent wind speeds. As a result, wind farms are typically built in areas with a high probability of the required wind speeds, which are geographically sparse. One way of overcoming this drawback is to tap into the energy available in winds at high altitudes which are not only consistent and of high magnitude, but also globally pervasive. An airborne wind energy device based upon the phenomenon of …

A Study Of Compressive Sensing For Application To Structural Health Monitoring, Vaahini Ganesan

Electronic Theses and Dissertations

One of the key areas that have attracted attention in the construction industry today is Structural Health Monitoring, more commonly known as SHM. It is a concept developed to monitor the quality and longevity of various engineering structures. The incorporation of such a system would help to continuously track health of the structure, indicate the occurrence/presence of any damage in real time and give us an idea of the number of useful years for the same. Being a recently conceived idea, the state of the art technique in the field is straight forward - populating a given structure with sensors …