Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Publication
Articles 1 - 10 of 10
Full-Text Articles in Mechanical Engineering
3d Simulation Of A Yogurt Filling Machine Using Grafcet Studio And Factory Io: Realization Of Industry 4.0, Bashir Salah, Waqas Saleem, Razaullah Khan, Ahmed Tawhid Ahmed Soliman
3d Simulation Of A Yogurt Filling Machine Using Grafcet Studio And Factory Io: Realization Of Industry 4.0, Bashir Salah, Waqas Saleem, Razaullah Khan, Ahmed Tawhid Ahmed Soliman
Articles
Manufacturing systems, enterprises and academic institutions worldwide are implementing industry 4.0 (IR4.0). By integrating the services and equipment, IR4.0 develops autonomous systems that manage industrial operations and exchange real-time data in real time. This study includes a simulation of an existing production system using the GRAFCET Studio software.
Aspen Plus Simulation Of Biomass Gasification In A Steam Blown Dual Fluidised Bed, Wayne Doherty, Anthony Reynolds, David Kennedy
Aspen Plus Simulation Of Biomass Gasification In A Steam Blown Dual Fluidised Bed, Wayne Doherty, Anthony Reynolds, David Kennedy
Book/Book Chapters
The efficient utilisation of biomass resources is of utmost importance. Biomass gasification offers much higher efficiencies than combustion. Gasification is a process in which a fuel is converted to a combustible gas (syngas). A dual fluidised bed gasifier known as the fast internally circulating fluidised bed (FICFB) was selected. It has been demonstrated at industrial scale and data is readily available for model validation. An Aspen Plus model was developed to simulate the FICFB gasifier. The model is based on Gibbs free energy minimisation and the restricted equilibrium method was used to calibrate it. The model has been validated and …
A Simulation Analysis Of Photovoltaic Ac Module Integrated Converters In Parallel, Under Controlled Edge Shading Conditions, Lynette O'Callaghan, Mick Mckeever, Brian Norton
A Simulation Analysis Of Photovoltaic Ac Module Integrated Converters In Parallel, Under Controlled Edge Shading Conditions, Lynette O'Callaghan, Mick Mckeever, Brian Norton
Conference Papers
A DC and AC power simulation comparison of: a Photovoltaic (PV) array with a modular, parallel, AC converter configuration; and a series, string configuration with a central AC converter, is presented. The systems are simulated using a comprehensive range of edge shading scenarios and irradiance conditions. Power control and transformation circuitry must be designed for shade and module mismatch tolerance to prevent over-proportional power to shade losses, as average losses from Building Integrated PV (BIPV) systems are approximately 20 to 25%, due to shade, mismatch, differences in orientation and inclination, and temperature effects. 59.4% of the simulations showed gains in …
Some Experiences, Thoughts, Ideas And Open Questions Relating To Applied Thermodynamics, Jim Mcgovern
Some Experiences, Thoughts, Ideas And Open Questions Relating To Applied Thermodynamics, Jim Mcgovern
Articles
In this paper I present some of my thoughts and experiences relating to 'applied thermodynamics' over my career so far. I explain my interest in thermodynamics, describe some topics I have worked on, point out some questions that appear still to be open and outline some ideas for work that could be done. I describe how I was inspired to pursue the area of applied thermodynamics, with reference to a glass, opposed-piston internal combustion engine. I put my heat pump research in the late 1970s briefly into today's context. Some of my research has been in relation to compressors, which …
Simulation Of A Tubular Solid Oxide Fuel Cell Stack Operating On Biomass Syngas Using Aspen Plus, Wayne Doherty, Anthony Reynolds, David Kennedy
Simulation Of A Tubular Solid Oxide Fuel Cell Stack Operating On Biomass Syngas Using Aspen Plus, Wayne Doherty, Anthony Reynolds, David Kennedy
Articles
A tubular solid oxide fuel cell (SOFC) stack was modelled and its operation on biomass syn-gas was investigated. The objective of this work was to develop a computer simulation model of a biomass gasification-SOFC (BG-SOFC) system capable of predicting performance under various operating conditions and using diverse fuels. The stack was modelled using Aspen Plus and considers ohmic, activation and concentration losses. It was validated against published data for operation on natural gas. Operating parameters such as fuel and air utilisation factor Uf and Ua, current density j and steam to carbon ratio STCR were varied and …
Validation Of A Simulation Model For A Combined Otto And Stirling Cycle Power Plant, Jim Mcgovern, Barry Cullen, Michel Feidt, Stoian Petrescu
Validation Of A Simulation Model For A Combined Otto And Stirling Cycle Power Plant, Jim Mcgovern, Barry Cullen, Michel Feidt, Stoian Petrescu
Conference Papers
A project has been underway at the Technological University Dublin (DIT) to investigate the feasibility of a combined Otto and Stirling cycle power plant in which a Stirling cycle engine would serve as a bottoming cycle for a stationary Otto cycle engine. This type of combined cycle plant is considered to have good potential for industrial use. This paper describes work by DIT and collaborators to validate a computer simulation model of the combined cycle plant. In investigating the feasibility of the type of combined cycle that is proposed there are a range of practical realities to be faced and …
Preliminary Modelling Results For An Otto Cycle/Stirling Cycle Hybrid-Engine-Based Power Generation System, Barry Cullen, Jim Mcgovern, Michel Feidt, Stoian Petrescu
Preliminary Modelling Results For An Otto Cycle/Stirling Cycle Hybrid-Engine-Based Power Generation System, Barry Cullen, Jim Mcgovern, Michel Feidt, Stoian Petrescu
Conference Papers
This paper presents preliminary data and results for a system mathematical model for a proposed Otto Cycle / Stirling Cycle hybrid-engine-based power generation system. The system is a combined cycle system with the Stirling cycle machine operating as a bottoming cycle on the Otto cycle exhaust. The application considered is that of a stationary power generation scenario wherein the Stirling cycle engine operates as a waste heat recovery device on the exhaust stream of the Otto cycle engine. This paper is primarily concerned with the development of a model for a suitable Stirling cycle engine capable of running on the …
Simulation Of A Tubular Solid Oxide Fuel Cell Stack Operating On Biomass Syn-Gas Using Aspen Plus, Wayne Doherty, Anthony Reynolds, David Kennedy
Simulation Of A Tubular Solid Oxide Fuel Cell Stack Operating On Biomass Syn-Gas Using Aspen Plus, Wayne Doherty, Anthony Reynolds, David Kennedy
Articles
A tubular solid oxide fuel cell (SOFC) stack is modelled and its operation on biomass syn-gas is investigated. The objective of this work is to develop a computer simulation model of a biomass gasification-SOFC (BG-SOFC) system capable of predicting performance under various operating conditions and using diverse fuels. The stack is modelled using Aspen Plus and considers ohmic, activation and concentration losses. It is validated against published data for operation on natural gas. Operating parameters such as fuel and air utilisation factor (Uf and Ua), current density (j) and steam to carbon ratio ( …
Simulation Of A Circulating Fluidised Bed Biomass Gasifier Using Aspen Plus: A Performance Analysis, Wayne Doherty, Anthony Reynolds, David Kennedy
Simulation Of A Circulating Fluidised Bed Biomass Gasifier Using Aspen Plus: A Performance Analysis, Wayne Doherty, Anthony Reynolds, David Kennedy
Conference Papers
In the near future biomass gasification is likely to play an important role in energy production and conversion. Its application has great potential in the context of climate change mitigation, increasing efficiency and energy security. Atmospheric circulating fluidised bed (CFB) technology was selected for the current study. An original computer simulation model of a CFB biomass gasifier was developed using ASPEN Plus (Advanced System for Process ENgineering Plus). It is based on Gibbs free energy minimisation and the restricted equilibrium method was used to calibrate it against experimental data. This was achieved by specifying the temperature approach for the gasification …
Heat Pump Research Programme At University College Dublin (1976), Seamus Timoney, Jim Mcgovern
Heat Pump Research Programme At University College Dublin (1976), Seamus Timoney, Jim Mcgovern
Conference Papers
This paper describes heat pump research at University College Dublin in 1976 relating to an air-to-air heat pump. The plant under test and its instrumentation are described and some measured performance data are presented. A heat pump simulation program is described. A theoretical comparison of refrigerants 12, 22 and 502 is presented with graphs of performance parameters as a function of operating conditions.